source: gs3-extensions/pharos/trunk/web/WEB-INF/conf/axis2.xml@ 20983

Last change on this file since 20983 was 20983, checked in by davidb, 14 years ago

Initial files for Phrasos extension to Greenstone3
File size: 26.0 KB
Line 
1<!--
2 ~ Licensed to the Apache Software Foundation (ASF) under one
3 ~ or more contributor license agreements. See the NOTICE file
4 ~ distributed with this work for additional information
5 ~ regarding copyright ownership. The ASF licenses this file
6 ~ to you under the Apache License, Version 2.0 (the
7 ~ "License"); you may not use this file except in compliance
8 ~ with the License. You may obtain a copy of the License at
9 ~
10 ~ http://www.apache.org/licenses/LICENSE-2.0
11 ~
12 ~ Unless required by applicable law or agreed to in writing,
13 ~ software distributed under the License is distributed on an
14 ~ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
15 ~ KIND, either express or implied. See the License for the
16 ~ specific language governing permissions and limitations
17 ~ under the License.
18 -->
19
20<axisconfig name="AxisJava2.0">
21 <!-- ================================================= -->
22 <!-- Parameters -->
23 <!-- ================================================= -->
24 <parameter name="hotdeployment">true</parameter>
25 <parameter name="hotupdate">false</parameter>
26 <parameter name="enableMTOM">false</parameter>
27 <parameter name="enableSwA">false</parameter>
28
29 <!--Uncomment if you want to enable file caching for attachments -->
30 <!--parameter name="cacheAttachments">true</parameter>
31 <parameter name="attachmentDIR"></parameter>
32 <parameter name="sizeThreshold">4000</parameter-->
33
34 <!--Uncomment if you want to plugin your own attachments lifecycle implementation -->
35 <!--<attachmentsLifecycleManager class="org.apache.axiom.attachments.lifecycle.impl.LifecycleManagerImpl"/>-->
36
37
38 <!--Uncomment if you want to enable the reduction of the in-memory cache of WSDL definitions -->
39 <!--In some server environments, the available memory heap is limited and can fill up under load -->
40 <!--Since in-memory copies of WSDL definitions can be large, some steps can be taken-->
41 <!--to reduce the memory needed for the cached WSDL definitions. -->
42 <!--parameter name="reduceWSDLMemoryCache">true</parameter-->
43
44 <!--This will give out the timout of the configuration contexts, in milliseconds-->
45 <parameter name="ConfigContextTimeoutInterval">30000</parameter>
46
47 <!--During a fault, stack trace can be sent with the fault message. The following flag will control -->
48 <!--that behavior.-->
49 <parameter name="sendStacktraceDetailsWithFaults">false</parameter>
50
51 <!--If there aren't any information available to find out the fault reason, we set the message of the exception-->
52 <!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be -->
53 <!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag-->
54 <!--is set, then Axis2 tries to get the first exception and set its message as the faultreason/Reason.-->
55 <parameter name="DrillDownToRootCauseForFaultReason">false</parameter>
56
57 <parameter name="userName">admin</parameter>
58 <parameter name="password">axis2</parameter>
59
60 <!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.-->
61 <!--ServicesDirectory only works on the following cases-->
62 <!---File based configurator and in that case the value should be a file URL (http:// not allowed)-->
63 <!---When creating URL Based configurator with URL file:// -->
64 <!--- War based configurator with expanded case , -->
65
66 <!--All the other scenarios it will be ignored.-->
67 <!--<parameter name="ServicesDirectory">service</parameter>-->
68 <!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path-->
69 <!--<parameter name="ModulesDirectory">modules</parameter>-->
70
71
72
73 <!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context-->
74 <!--root which can configured using the following contextRoot parameter-->
75 <!--<parameter name="contextRoot">axis2</parameter>-->
76
77 <!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distinguiush those endpoints-->
78 <!--In case of a servlet, if you change this you have to manually change the settings of your servlet container to map this -->
79 <!--context path to proper Axis2 servlets-->
80 <!--<parameter name="servicePath">services</parameter>-->
81 <!--<parameter name="restPath">rest</parameter>-->
82
83 <!-- Following parameter will completely disable REST handling in Axis2-->
84 <parameter name="disableREST" locked="false">false</parameter>
85
86 <!-- Following parameter will suppress generation of SOAP 1.2 bindings in auto-generated WSDL files -->
87 <parameter name="disableSOAP12" locked="true">false</parameter>
88
89 <!--POJO deployer , this will alow users to drop .class file and make that into a service-->
90 <deployer extension=".class" directory="pojo" class="org.apache.axis2.deployment.POJODeployer"/>
91 <deployer extension=".jar" directory="servicejars" class="org.apache.axis2.jaxws.framework.JAXWSDeployer"/>
92
93 <!--<deployer extension=".jsa" directory="rmiservices" class="org.apache.axis2.rmi.deploy.RMIServiceDeployer"/>-->
94
95
96 <!-- Following parameter will set the host name for the epr-->
97 <!--<parameter name="hostname" locked="true">myhost.com</parameter>-->
98
99 <!-- If you have a front end host which exposes this webservice using a different public URL -->
100 <!-- use this parameter to override autodetected url -->
101 <!--<parameter name="httpFrontendHostUrl">https://someotherhost/context</parameter>-->
102
103
104 <!-- The way of adding listener to the system-->
105 <!-- <listener class="org.apache.axis2.ObserverIMPL">-->
106 <!-- <parameter name="RSS_URL">http://127.0.0.1/rss</parameter>-->
107 <!-- </listener>-->
108
109 <threadContextMigrators>
110 <threadContextMigrator listId="JAXWS-ThreadContextMigrator-List" class="org.apache.axis2.jaxws.addressing.migrator.EndpointContextMapMigrator"/>
111 </threadContextMigrators>
112
113 <!-- ================================================= -->
114 <!-- Message Receivers -->
115 <!-- ================================================= -->
116 <!--This is the deafult MessageReceiver for the system , if you want to have MessageReceivers for -->
117 <!--all the other MEP implement it and add the correct entry to here , so that you can refer from-->
118 <!--any operation -->
119 <!--Note : You can ovrride this for a particular service by adding the same element with your requirement-->
120 <messageReceivers>
121 <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only"
122 class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
123 <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out"
124 class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
125 <messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-only"
126 class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
127 <messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-out"
128 class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
129 </messageReceivers>
130
131 <!-- ================================================= -->
132 <!-- Message Formatter -->
133 <!-- ================================================= -->
134 <!--Following content type to message formatter mapping can be used to implement support for different message -->
135 <!--format serialization in Axis2. These message formats are expected to be resolved based on the content type. -->
136 <messageFormatters>
137 <messageFormatter contentType="application/x-www-form-urlencoded"
138 class="org.apache.axis2.transport.http.XFormURLEncodedFormatter"/>
139 <messageFormatter contentType="multipart/form-data"
140 class="org.apache.axis2.transport.http.MultipartFormDataFormatter"/>
141 <messageFormatter contentType="application/xml"
142 class="org.apache.axis2.transport.http.ApplicationXMLFormatter"/>
143 <messageFormatter contentType="text/xml"
144 class="org.apache.axis2.transport.http.SOAPMessageFormatter"/>
145 <messageFormatter contentType="application/soap+xml"
146 class="org.apache.axis2.transport.http.SOAPMessageFormatter"/>
147 </messageFormatters>
148
149 <!-- ================================================= -->
150 <!-- Message Builders -->
151 <!-- ================================================= -->
152 <!--Following content type to builder mapping can be used to implement support for different message -->
153 <!--formats in Axis2. These message formats are expected to be resolved based on the content type. -->
154 <messageBuilders>
155 <messageBuilder contentType="application/xml"
156 class="org.apache.axis2.builder.ApplicationXMLBuilder"/>
157 <messageBuilder contentType="application/xml"
158 class="org.apache.axis2.builder.ApplicationXMLBuilder"/>
159 <messageBuilder contentType="application/x-www-form-urlencoded"
160 class="org.apache.axis2.builder.XFormURLEncodedBuilder"/>
161 <messageBuilder contentType="multipart/form-data"
162 class="org.apache.axis2.builder.MultipartFormDataBuilder"/>
163 </messageBuilders>
164
165 <!-- ================================================= -->
166 <!-- Transport Ins -->
167 <!-- ================================================= -->
168 <transportReceiver name="http"
169 class="org.apache.axis2.transport.http.SimpleHTTPServer">
170 <parameter name="port">8080</parameter>
171 <!-- Here is the complete list of supported parameters (see example settings further below):
172 port: the port to listen on (default 6060)
173 hostname: if non-null, url prefix used in reply-to endpoint references (default null)
174 originServer: value of http Server header in outgoing messages (default "Simple-Server/1.1")
175 requestTimeout: value in millis of time that requests can wait for data (default 20000)
176 requestTcpNoDelay: true to maximize performance and minimize latency (default true)
177 false to minimize bandwidth consumption by combining segments
178 requestCoreThreadPoolSize: number of threads available for request processing (unless queue fills up) (default 25)
179 requestMaxThreadPoolSize: number of threads available for request processing if queue fills up (default 150)
180 note that default queue never fills up: see HttpFactory
181 threadKeepAliveTime: time to keep threads in excess of core size alive while inactive (default 180)
182 note that no such threads can exist with default unbounded request queue
183 threadKeepAliveTimeUnit: TimeUnit of value in threadKeepAliveTime (default SECONDS) (default SECONDS)
184 -->
185 <!-- <parameter name="hostname">http://www.myApp.com/ws</parameter> -->
186 <!-- <parameter name="originServer">My-Server/1.1</parameter> -->
187 <!-- <parameter name="requestTimeout">10000</parameter> -->
188 <!-- <parameter name="requestTcpNoDelay">false</parameter> -->
189 <!-- <parameter name="requestCoreThreadPoolSize">50</parameter> -->
190 <!-- <parameter name="requestMaxThreadPoolSize">100</parameter> -->
191 <!-- <parameter name="threadKeepAliveTime">240000</parameter> -->
192 <!-- <parameter name="threadKeepAliveTimeUnit">MILLISECONDS</parameter> -->
193 </transportReceiver>
194
195 <!--Uncomment this and configure as appropriate for JMS transport support, after setting up your JMS environment (e.g. ActiveMQ)
196 <transportReceiver name="jms" class="org.apache.axis2.transport.jms.JMSListener">
197 <parameter name="myTopicConnectionFactory">
198 <parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
199 <parameter name="java.naming.provider.url">tcp://localhost:61616</parameter>
200 <parameter name="transport.jms.ConnectionFactoryJNDIName">TopicConnectionFactory</parameter>
201 </parameter>
202
203 <parameter name="myQueueConnectionFactory">
204 <parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
205 <parameter name="java.naming.provider.url">tcp://localhost:61616</parameter>
206 <parameter name="transport.jms.ConnectionFactoryJNDIName">QueueConnectionFactory</parameter>
207 </parameter>
208
209 <parameter name="default">
210 <parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
211 <parameter name="java.naming.provider.url">tcp://localhost:61616</parameter>
212 <parameter name="transport.jms.ConnectionFactoryJNDIName">QueueConnectionFactory</parameter>
213 </parameter>
214 </transportReceiver>-->
215
216 <!-- ================================================= -->
217 <!-- Non-blocking http/s Transport Listener -->
218
219 <!-- the non blocking http transport based on HttpCore + NIO extensions
220 <transportReceiver name="http" class="org.apache.axis2.transport.nhttp.HttpCoreNIOListener">
221 <parameter name="port" locked="false">9000</parameter>
222 <parameter name="non-blocking" locked="false">true</parameter>
223 </transportReceiver>-->
224
225 <!-- the non blocking https transport based on HttpCore + SSL-NIO extensions
226 <transportReceiver name="https" class="org.apache.axis2.transport.nhttp.HttpCoreNIOSSLListener">
227 <parameter name="port" locked="false">9002</parameter>
228 <parameter name="non-blocking" locked="false">true</parameter>
229 <parameter name="keystore" locked="false">
230 <KeyStore>
231 <Location>identity.jks</Location>
232 <Type>JKS</Type>
233 <Password>password</Password>
234 <KeyPassword>password</KeyPassword>
235 </KeyStore>
236 </parameter>
237 <parameter name="truststore" locked="false">
238 <TrustStore>
239 <Location>trust.jks</Location>
240 <Type>JKS</Type>
241 <Password>password</Password>
242 </TrustStore>
243 </parameter>-->
244 <!--<parameter name="SSLVerifyClient">require</parameter>
245 supports optional|require or defaults to none -->
246 <!--</transportReceiver>-->
247
248 <!-- ================================================= -->
249 <!-- Mail Transport Listener -->
250 <!-- This is a sample configuration. It assumes a mail server running in localhost.
251 Listener pops messages that comes to the email address red@localhost. Users
252 password is red. Listener connect to the server every 3000 milliseconds.
253 Parameters with "transport." prefix is Axis2 specific. Others are all from Java Mail API.
254 http://people.apache.org/~pzf/SMTPBase64Binding-0.2.html
255 -->
256 <!-- ================================================= -->
257 <!--<transportReceiver name="mailto" class="org.apache.axis2.transport.mail.SimpleMailListener">
258 <parameter name="mail.pop3.host">localhost</parameter>
259 <parameter name="mail.pop3.user">red</parameter>
260 <parameter name="mail.store.protocol">pop3</parameter>
261 <parameter name="transport.mail.pop3.password">red</parameter>
262 <parameter name="transport.mail.replyToAddress">red@localhost</parameter>
263 <parameter name="transport.listener.interval">3000</parameter>
264 </transportReceiver>-->
265
266 <!--Uncomment if you want to have TCP transport support-->
267 <!--transportReceiver name="tcp"
268 class="org.apache.axis2.transport.tcp.TCPServer">
269 <parameter name="port">6060</parameter-->>
270 <!--If you want to give your own host address for EPR generation-->
271 <!--uncomment the following paramter , and set it as you required.-->
272 <!--<parameter name="hostname">tcp://myApp.com/ws</parameter>-->
273 <!-- /transportReceiver -->
274
275 <!-- ================================================= -->
276 <!-- Transport Outs -->
277 <!-- ================================================= -->
278
279 <transportSender name="tcp"
280 class="org.apache.axis2.transport.tcp.TCPTransportSender"/>
281 <transportSender name="local"
282 class="org.apache.axis2.transport.local.LocalTransportSender"/>
283 <transportSender name="http"
284 class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
285 <parameter name="PROTOCOL">HTTP/1.1</parameter>
286 <parameter name="Transfer-Encoding">chunked</parameter>
287
288 <!-- If following is set to 'true', optional action part of the Content-Type will not be added to the SOAP 1.2 messages -->
289 <!-- <parameter name="OmitSOAP12Action">true</parameter> -->
290 </transportSender>
291
292 <transportSender name="https"
293 class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
294 <parameter name="PROTOCOL">HTTP/1.1</parameter>
295 <parameter name="Transfer-Encoding">chunked</parameter>
296 </transportSender>
297
298 <!-- Please enable this if you need the java transport -->
299 <!-- <transportSender name="java"
300 class="org.apache.axis2.transport.java.JavaTransportSender"/> -->
301
302 <!--<transportSender name="jms"-->
303 <!--class="org.apache.axis2.transport.jms.JMSSender"/>-->
304
305 <!-- ================================================= -->
306 <!-- Non-blocking http/s Transport Sender -->
307
308 <!-- the non-blocking http transport sender based on HttpCore + NIO extensions
309 <transportSender name="http" class="org.apache.axis2.transport.nhttp.HttpCoreNIOSender">
310 <parameter name="non-blocking" locked="false">true</parameter>
311 </transportSender>-->
312
313 <!-- the non-blocking https transport sender based on HttpCore + NIO SSL extensions
314 <transportSender name="https" class="org.apache.axis2.transport.nhttp.HttpCoreNIOSSLSender">
315 <parameter name="non-blocking" locked="false">true</parameter>
316 <parameter name="keystore" locked="false">
317 <KeyStore>
318 <Location>identity.jks</Location>
319 <Type>JKS</Type>
320 <Password>password</Password>
321 <KeyPassword>password</KeyPassword>
322 </KeyStore>
323 </parameter>
324 <parameter name="truststore" locked="false">
325 <TrustStore>
326 <Location>trust.jks</Location>
327 <Type>JKS</Type>
328 <Password>password</Password>
329 </TrustStore>
330 </parameter>-->
331 <!--<parameter name="HostnameVerifier">DefaultAndLocalhost</parameter>
332 supports Strict|AllowAll|DefaultAndLocalhost or the default if none specified -->
333 <!--</transportSender>-->
334
335 <!-- ================================================= -->
336 <!-- Mail Transport Sender -->
337 <!--Only need to uncomment the sender. Configuration is achieved with every client.
338 At any instant mail host should be given. Sample configuration has been given.
339 http://people.apache.org/~pzf/SMTPBase64Binding-0.2.html
340 -->
341 <!-- ================================================= -->
342 <!--<transportSender name="mailto" class="org.apache.axis2.transport.mail.MailTransportSender">
343 <parameter name="mail.smtp.host">localhost</parameter>
344 </transportSender>-->
345
346 <!-- ================================================= -->
347 <!-- Global Modules -->
348 <!-- ================================================= -->
349 <!-- Comment this to disable Addressing -->
350 <module ref="addressing"/>
351
352 <!--Configuring module , providing parameters for modules whether they refer or not-->
353 <!--<moduleConfig name="addressing">-->
354 <!--<parameter name="addressingPara">N/A</parameter>-->
355 <!--</moduleConfig>-->
356
357 <!-- ================================================= -->
358 <!-- Clustering -->
359 <!-- ================================================= -->
360 <!-- Configure and uncomment following for preparing Axis2 to a clustered environment -->
361 <!--
362 <cluster class="org.apache.axis2.cluster.tribes.TribesClusterManager">
363 <parameter name="param1">value1</parameter>
364 <parameter name="domain">apache.axis2.domain</parameter>
365 <parameter name="synchronizeAll">true</parameter>
366 <parameter name="maxRetries">10</parameter>
367 <configurationManager class="org.apache.axis2.cluster.configuration.TribesConfigurationManager">
368 <listener class="org.apache.axis2.cluster.configuration.DefaultConfigurationManagerListener"/>
369 </configurationManager>
370 <contextManager class="org.apache.axis2.cluster.context.TribesContextManager">
371 <listener class="org.apache.axis2.cluster.context.DefaultContextManagerListener"/>
372 </contextManager>
373 </cluster>
374 -->
375
376 <!-- ================================================= -->
377 <!-- Phases -->
378 <!-- ================================================= -->
379 <phaseOrder type="InFlow">
380 <!-- System predefined phases -->
381 <phase name="Transport">
382 <handler name="RequestURIBasedDispatcher"
383 class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher">
384 <order phase="Transport"/>
385 </handler>
386 <handler name="SOAPActionBasedDispatcher"
387 class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher">
388 <order phase="Transport"/>
389 </handler>
390 </phase>
391 <phase name="Addressing">
392 <handler name="AddressingBasedDispatcher"
393 class="org.apache.axis2.dispatchers.AddressingBasedDispatcher">
394 <order phase="Addressing"/>
395 </handler>
396 </phase>
397 <phase name="Security"/>
398 <phase name="PreDispatch"/>
399 <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
400 <handler name="RequestURIBasedDispatcher"
401 class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/>
402 <handler name="SOAPActionBasedDispatcher"
403 class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/>
404 <handler name="RequestURIOperationDispatcher"
405 class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/>
406 <handler name="SOAPMessageBodyBasedDispatcher"
407 class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/>
408 <handler name="HTTPLocationBasedDispatcher"
409 class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/>
410 <handler name="GenericProviderDispatcher"
411 class="org.apache.axis2.jaxws.dispatchers.GenericProviderDispatcher"/>
412 <handler name="MustUnderstandValidationDispatcher"
413 class="org.apache.axis2.jaxws.dispatchers.MustUnderstandValidationDispatcher"/>
414 </phase>
415 <phase name="RMPhase"/>
416 <!-- System predefined phases -->
417 <!-- After Postdispatch phase module author or service author can add any phase he want -->
418 <phase name="OperationInPhase">
419 <handler name="MustUnderstandChecker"
420 class="org.apache.axis2.jaxws.dispatchers.MustUnderstandChecker">
421 <order phase="OperationInPhase"/>
422 </handler>
423 </phase>
424 <phase name="soapmonitorPhase"/>
425 </phaseOrder>
426 <phaseOrder type="OutFlow">
427 <!-- user can add his own phases to this area -->
428 <phase name="soapmonitorPhase"/>
429 <phase name="OperationOutPhase"/>
430 <!--system predefined phase-->
431 <!--these phase will run irrespective of the service-->
432 <phase name="RMPhase"/>
433 <phase name="PolicyDetermination"/>
434 <phase name="MessageOut"/>
435 <phase name="Security"/>
436 </phaseOrder>
437 <phaseOrder type="InFaultFlow">
438 <phase name="Addressing">
439 <handler name="AddressingBasedDispatcher"
440 class="org.apache.axis2.dispatchers.AddressingBasedDispatcher">
441 <order phase="Addressing"/>
442 </handler>
443 </phase>
444 <phase name="Security"/>
445 <phase name="PreDispatch"/>
446 <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
447 <handler name="RequestURIBasedDispatcher"
448 class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/>
449 <handler name="SOAPActionBasedDispatcher"
450 class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/>
451 <handler name="RequestURIOperationDispatcher"
452 class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/>
453 <handler name="SOAPMessageBodyBasedDispatcher"
454 class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/>
455 <handler name="HTTPLocationBasedDispatcher"
456 class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/>
457 <handler name="GenericProviderDispatcher"
458 class="org.apache.axis2.jaxws.dispatchers.GenericProviderDispatcher"/>
459 <handler name="MustUnderstandValidationDispatcher"
460 class="org.apache.axis2.jaxws.dispatchers.MustUnderstandValidationDispatcher"/>
461 </phase>
462 <phase name="RMPhase"/>
463 <!-- user can add his own phases to this area -->
464 <phase name="OperationInFaultPhase"/>
465 <phase name="soapmonitorPhase"/>
466 </phaseOrder>
467 <phaseOrder type="OutFaultFlow">
468 <!-- user can add his own phases to this area -->
469 <phase name="soapmonitorPhase"/>
470 <phase name="OperationOutFaultPhase"/>
471 <phase name="RMPhase"/>
472 <phase name="PolicyDetermination"/>
473 <phase name="MessageOut"/>
474 <phase name="Security"/>
475 </phaseOrder>
476</axisconfig>
477
Note: See TracBrowser for help on using the repository browser.