source: gsdl/trunk/perllib/util.pm@ 17512

Last change on this file since 17512 was 17512, checked in by kjdon, 16 years ago

added a method to turn windows filename paths (with single back slash) into a form suitable for use in a regular expression (with double backslash)
  • Property svn:keywords set to Author Date Id Revision
File size: 24.4 KB
Line 
1###########################################################################
2#
3# util.pm -- various useful utilities
4# A component of the Greenstone digital library software
5# from the New Zealand Digital Library Project at the
6# University of Waikato, New Zealand.
7#
8# Copyright (C) 1999 New Zealand Digital Library Project
9#
10# This program is free software; you can redistribute it and/or modify
11# it under the terms of the GNU General Public License as published by
12# the Free Software Foundation; either version 2 of the License, or
13# (at your option) any later version.
14#
15# This program is distributed in the hope that it will be useful,
16# but WITHOUT ANY WARRANTY; without even the implied warranty of
17# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18# GNU General Public License for more details.
19#
20# You should have received a copy of the GNU General Public License
21# along with this program; if not, write to the Free Software
22# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23#
24###########################################################################
25
26package util;
27
28use File::Copy;
29use File::Basename;
30
31use strict;
32
33
34# removes files (but not directories)
35sub rm {
36 my (@files) = @_;
37 my @filefiles = ();
38
39 # make sure the files we want to delete exist
40 # and are regular files
41 foreach my $file (@files) {
42 if (!-e $file) {
43 print STDERR "util::rm $file does not exist\n";
44 } elsif ((!-f $file) && (!-l $file)) {
45 print STDERR "util::rm $file is not a regular (or symbolic) file\n";
46 } else {
47 push (@filefiles, $file);
48 }
49 }
50
51 # remove the files
52 my $numremoved = unlink @filefiles;
53
54 # check to make sure all of them were removed
55 if ($numremoved != scalar(@filefiles)) {
56 print STDERR "util::rm Not all files were removed\n";
57 }
58}
59
60
61
62# recursive removal
63sub filtered_rm_r {
64 my ($files,$file_accept_re,$file_reject_re) = @_;
65
66 my @files_array = (ref $files eq "ARRAY") ? @$files : ($files);
67
68 # recursively remove the files
69 foreach my $file (@files_array) {
70 $file =~ s/[\/\\]+$//; # remove trailing slashes
71
72 if (!-e $file) {
73 print STDERR "util::filtered_rm_r $file does not exist\n";
74
75 } elsif ((-d $file) && (!-l $file)) { # don't recurse down symbolic link
76 # get the contents of this directory
77 if (!opendir (INDIR, $file)) {
78 print STDERR "util::filtered_rm_r could not open directory $file\n";
79 } else {
80 my @filedir = grep (!/^\.\.?$/, readdir (INDIR));
81 closedir (INDIR);
82
83 # remove all the files in this directory
84 map {$_="$file/$_";} @filedir;
85 &filtered_rm_r (\@filedir,$file_accept_re,$file_reject_re);
86
87 if (!defined $file_accept_re && !defined $file_reject_re) {
88 # remove this directory
89 if (!rmdir $file) {
90 print STDERR "util::filtered_rm_r couldn't remove directory $file\n";
91 }
92 }
93 }
94 } else {
95 next if (defined $file_reject_re && ($file =~ m/$file_reject_re/));
96
97 if ((!defined $file_accept_re) || ($file =~ m/$file_accept_re/)) {
98 # remove this file
99 &rm ($file);
100 }
101 }
102 }
103}
104
105
106# recursive removal
107sub rm_r {
108 my (@files) = @_;
109
110 # use the more general (but reterospectively written function
111 # filtered_rm_r function()
112
113 filtered_rm_r(\@files,undef,undef); # no accept or reject expressions
114}
115
116
117
118
119# moves a file or a group of files
120sub mv {
121 my $dest = pop (@_);
122 my (@srcfiles) = @_;
123
124 # remove trailing slashes from source and destination files
125 $dest =~ s/[\\\/]+$//;
126 map {$_ =~ s/[\\\/]+$//;} @srcfiles;
127
128 # a few sanity checks
129 if (scalar (@srcfiles) == 0) {
130 print STDERR "util::mv no destination directory given\n";
131 return;
132 } elsif ((scalar (@srcfiles) > 1) && (!-d $dest)) {
133 print STDERR "util::mv if multiple source files are given the ".
134 "destination must be a directory\n";
135 return;
136 }
137
138 # move the files
139 foreach my $file (@srcfiles) {
140 my $tempdest = $dest;
141 if (-d $tempdest) {
142 my ($filename) = $file =~ /([^\\\/]+)$/;
143 $tempdest .= "/$filename";
144 }
145 if (!-e $file) {
146 print STDERR "util::mv $file does not exist\n";
147 } else {
148 rename ($file, $tempdest);
149 }
150 }
151}
152
153
154# copies a file or a group of files
155sub cp {
156 my $dest = pop (@_);
157 my (@srcfiles) = @_;
158
159 # remove trailing slashes from source and destination files
160 $dest =~ s/[\\\/]+$//;
161 map {$_ =~ s/[\\\/]+$//;} @srcfiles;
162
163 # a few sanity checks
164 if (scalar (@srcfiles) == 0) {
165 print STDERR "util::cp no destination directory given\n";
166 return;
167 } elsif ((scalar (@srcfiles) > 1) && (!-d $dest)) {
168 print STDERR "util::cp if multiple source files are given the ".
169 "destination must be a directory\n";
170 return;
171 }
172
173 # copy the files
174 foreach my $file (@srcfiles) {
175 my $tempdest = $dest;
176 if (-d $tempdest) {
177 my ($filename) = $file =~ /([^\\\/]+)$/;
178 $tempdest .= "/$filename";
179 }
180 if (!-e $file) {
181 print STDERR "util::cp $file does not exist\n";
182 } elsif (!-f $file) {
183 print STDERR "util::cp $file is not a plain file\n";
184 } else {
185 &File::Copy::copy ($file, $tempdest);
186 }
187 }
188}
189
190
191
192# recursively copies a file or group of files
193# syntax: cp_r (sourcefiles, destination directory)
194# destination must be a directory - to copy one file to
195# another use cp instead
196sub cp_r {
197 my $dest = pop (@_);
198 my (@srcfiles) = @_;
199
200 # a few sanity checks
201 if (scalar (@srcfiles) == 0) {
202 print STDERR "util::cp_r no destination directory given\n";
203 return;
204 } elsif (-f $dest) {
205 print STDERR "util::cp_r destination must be a directory\n";
206 return;
207 }
208
209 # create destination directory if it doesn't exist already
210 if (! -d $dest) {
211 my $store_umask = umask(0002);
212 mkdir ($dest, 0777);
213 umask($store_umask);
214 }
215
216 # copy the files
217 foreach my $file (@srcfiles) {
218
219 if (!-e $file) {
220 print STDERR "util::cp_r $file does not exist\n";
221
222 } elsif (-d $file) {
223 # make the new directory
224 my ($filename) = $file =~ /([^\\\/]*)$/;
225 $dest = &util::filename_cat ($dest, $filename);
226 my $store_umask = umask(0002);
227 mkdir ($dest, 0777);
228 umask($store_umask);
229
230 # get the contents of this directory
231 if (!opendir (INDIR, $file)) {
232 print STDERR "util::cp_r could not open directory $file\n";
233 } else {
234 my @filedir = readdir (INDIR);
235 closedir (INDIR);
236 foreach my $f (@filedir) {
237 next if $f =~ /^\.\.?$/;
238 # copy all the files in this directory
239 my $ff = &util::filename_cat ($file, $f);
240 &cp_r ($ff, $dest);
241 }
242 }
243
244 } else {
245 &cp($file, $dest);
246 }
247 }
248}
249
250# copies a directory and its contents, excluding subdirectories, into a new directory
251sub cp_r_toplevel {
252 my $dest = pop (@_);
253 my (@srcfiles) = @_;
254
255 # a few sanity checks
256 if (scalar (@srcfiles) == 0) {
257 print STDERR "util::cp_r no destination directory given\n";
258 return;
259 } elsif (-f $dest) {
260 print STDERR "util::cp_r destination must be a directory\n";
261 return;
262 }
263
264 # create destination directory if it doesn't exist already
265 if (! -d $dest) {
266 my $store_umask = umask(0002);
267 mkdir ($dest, 0777);
268 umask($store_umask);
269 }
270
271 # copy the files
272 foreach my $file (@srcfiles) {
273
274 if (!-e $file) {
275 print STDERR "util::cp_r $file does not exist\n";
276
277 } elsif (-d $file) {
278 # make the new directory
279 my ($filename) = $file =~ /([^\\\/]*)$/;
280 $dest = &util::filename_cat ($dest, $filename);
281 my $store_umask = umask(0002);
282 mkdir ($dest, 0777);
283 umask($store_umask);
284
285 # get the contents of this directory
286 if (!opendir (INDIR, $file)) {
287 print STDERR "util::cp_r could not open directory $file\n";
288 } else {
289 my @filedir = readdir (INDIR);
290 closedir (INDIR);
291 foreach my $f (@filedir) {
292 next if $f =~ /^\.\.?$/;
293
294 # copy all the files in this directory, but not directories
295 my $ff = &util::filename_cat ($file, $f);
296 if (-f $ff) {
297 &cp($ff, $dest);
298 #&cp_r ($ff, $dest);
299 }
300 }
301 }
302
303 } else {
304 &cp($file, $dest);
305 }
306 }
307}
308
309sub mk_dir {
310 my ($dir) = @_;
311
312 my $store_umask = umask(0002);
313 my $mkdir_ok = mkdir ($dir, 0777);
314 umask($store_umask);
315
316 if (!$mkdir_ok)
317 {
318 print STDERR "util::mk_dir could not create directory $dir\n";
319 return;
320 }
321}
322
323# in case anyone cares - I did some testing (using perls Benchmark module)
324# on this subroutine against File::Path::mkpath (). mk_all_dir() is apparently
325# slightly faster (surprisingly) - Stefan.
326sub mk_all_dir {
327 my ($dir) = @_;
328
329 # use / for the directory separator, remove duplicate and
330 # trailing slashes
331 $dir=~s/[\\\/]+/\//g;
332 $dir=~s/[\\\/]+$//;
333
334 # make sure the cache directory exists
335 my $dirsofar = "";
336 my $first = 1;
337 foreach my $dirname (split ("/", $dir)) {
338 $dirsofar .= "/" unless $first;
339 $first = 0;
340
341 $dirsofar .= $dirname;
342
343 next if $dirname =~ /^(|[a-z]:)$/i;
344 if (!-e $dirsofar)
345 {
346 my $store_umask = umask(0002);
347 my $mkdir_ok = mkdir ($dirsofar, 0777);
348 umask($store_umask);
349 if (!$mkdir_ok)
350 {
351 print STDERR "util::mk_all_dir could not create directory $dirsofar\n";
352 return;
353 }
354 }
355 }
356}
357
358# make hard link to file if supported by OS, otherwise copy the file
359sub hard_link {
360 my ($src, $dest) = @_;
361
362 # remove trailing slashes from source and destination files
363 $src =~ s/[\\\/]+$//;
364 $dest =~ s/[\\\/]+$//;
365
366 # a few sanity checks
367 if (-e $dest) {
368 # destination file already exists
369 return;
370 }
371 elsif (!-e $src) {
372 print STDERR "util::hard_link source file $src does not exist\n";
373 return 1;
374 }
375 elsif (-d $src) {
376 print STDERR "util::hard_link source $src is a directory\n";
377 return 1;
378 }
379
380 my $dest_dir = &File::Basename::dirname($dest);
381 mk_all_dir($dest_dir) if (!-e $dest_dir);
382
383 # link not supported on windows 9x
384 if (($ENV{'GSDLOS'} =~ /^windows$/i) && (Win32::FsType() !~ /^ntfs$/i)) {
385 &File::Copy::copy ($src, $dest);
386
387 } elsif (!link($src, $dest)) {
388 print STDERR "util::hard_link: unable to create hard link. ";
389 print STDERR " Attempting to copy file: $src -> $dest\n";
390 &File::Copy::copy ($src, $dest);
391 }
392 return 0;
393}
394
395# make soft link to file if supported by OS, otherwise copy file
396sub soft_link {
397 my ($src, $dest, $ensure_paths_absolute) = @_;
398
399 # remove trailing slashes from source and destination files
400 $src =~ s/[\\\/]+$//;
401 $dest =~ s/[\\\/]+$//;
402
403 # Ensure file paths are absolute IF requested to do so
404 # Soft_linking didn't work for relative paths
405 if(defined $ensure_paths_absolute && $ensure_paths_absolute) {
406 # We need to ensure that the src file is the absolute path
407 # See http://perldoc.perl.org/File/Spec.html
408 if(!File::Spec->file_name_is_absolute( $src )) { # it's relative
409 $src = File::Spec->rel2abs($src); # make absolute
410 }
411 # Might as well ensure that the destination file's absolute path is used
412 if(!File::Spec->file_name_is_absolute( $dest )) {
413 $dest = File::Spec->rel2abs($dest); # make absolute
414 }
415 }
416
417 # a few sanity checks
418 if (!-e $src) {
419 print STDERR "util::soft_link source file $src does not exist\n";
420 return 0;
421 }
422
423 my $dest_dir = &File::Basename::dirname($dest);
424 mk_all_dir($dest_dir) if (!-e $dest_dir);
425
426 if ($ENV{'GSDLOS'} =~ /^windows$/i) {
427 # symlink not supported on windows
428 &File::Copy::copy ($src, $dest);
429
430 } elsif (!eval {symlink($src, $dest)}) {
431 print STDERR "util::soft_link: unable to create soft link.\n";
432 return 0;
433 }
434
435 return 1;
436}
437
438
439
440
441# updates a copy of a directory in some other part of the filesystem
442# verbosity settings are: 0=low, 1=normal, 2=high
443# both $fromdir and $todir should be absolute paths
444sub cachedir {
445 my ($fromdir, $todir, $verbosity) = @_;
446 $verbosity = 1 unless defined $verbosity;
447
448 # use / for the directory separator, remove duplicate and
449 # trailing slashes
450 $fromdir=~s/[\\\/]+/\//g;
451 $fromdir=~s/[\\\/]+$//;
452 $todir=~s/[\\\/]+/\//g;
453 $todir=~s/[\\\/]+$//;
454
455 &mk_all_dir ($todir);
456
457 # get the directories in ascending order
458 if (!opendir (FROMDIR, $fromdir)) {
459 print STDERR "util::cachedir could not read directory $fromdir\n";
460 return;
461 }
462 my @fromdir = grep (!/^\.\.?$/, sort(readdir (FROMDIR)));
463 closedir (FROMDIR);
464
465 if (!opendir (TODIR, $todir)) {
466 print STDERR "util::cacedir could not read directory $todir\n";
467 return;
468 }
469 my @todir = grep (!/^\.\.?$/, sort(readdir (TODIR)));
470 closedir (TODIR);
471
472 my $fromi = 0;
473 my $toi = 0;
474
475 while ($fromi < scalar(@fromdir) || $toi < scalar(@todir)) {
476# print "fromi: $fromi toi: $toi\n";
477
478 # see if we should delete a file/directory
479 # this should happen if the file/directory
480 # is not in the from list or if its a different
481 # size, or has an older timestamp
482 if ($toi < scalar(@todir)) {
483 if (($fromi >= scalar(@fromdir)) ||
484 ($todir[$toi] lt $fromdir[$fromi] ||
485 ($todir[$toi] eq $fromdir[$fromi] &&
486 &differentfiles("$fromdir/$fromdir[$fromi]","$todir/$todir[$toi]",
487 $verbosity)))) {
488
489 # the files are different
490 &rm_r("$todir/$todir[$toi]");
491 splice(@todir, $toi, 1); # $toi stays the same
492
493 } elsif ($todir[$toi] eq $fromdir[$fromi]) {
494 # the files are the same
495 # if it is a directory, check its contents
496 if (-d "$todir/$todir[$toi]") {
497 &cachedir ("$fromdir/$fromdir[$fromi]",
498 "$todir/$todir[$toi]", $verbosity);
499 }
500
501 $toi++;
502 $fromi++;
503 next;
504 }
505 }
506
507 # see if we should insert a file/directory
508 # we should insert a file/directory if there
509 # is no tofiles left or if the tofile does not exist
510 if ($fromi < scalar(@fromdir) && ($toi >= scalar(@todir) ||
511 $todir[$toi] gt $fromdir[$fromi])) {
512 &cp_r ("$fromdir/$fromdir[$fromi]", "$todir/$fromdir[$fromi]");
513 splice (@todir, $toi, 0, $fromdir[$fromi]);
514
515 $toi++;
516 $fromi++;
517 }
518 }
519}
520
521# this function returns -1 if either file is not found
522# assumes that $file1 and $file2 are absolute file names or
523# in the current directory
524# $file2 is allowed to be newer than $file1
525sub differentfiles {
526 my ($file1, $file2, $verbosity) = @_;
527 $verbosity = 1 unless defined $verbosity;
528
529 $file1 =~ s/\/+$//;
530 $file2 =~ s/\/+$//;
531
532 my ($file1name) = $file1 =~ /\/([^\/]*)$/;
533 my ($file2name) = $file2 =~ /\/([^\/]*)$/;
534
535 return -1 unless (-e $file1 && -e $file2);
536 if ($file1name ne $file2name) {
537 print STDERR "filenames are not the same\n" if ($verbosity >= 2);
538 return 1;
539 }
540
541 my @file1stat = stat ($file1);
542 my @file2stat = stat ($file2);
543
544 if (-d $file1) {
545 if (! -d $file2) {
546 print STDERR "one file is a directory\n" if ($verbosity >= 2);
547 return 1;
548 }
549 return 0;
550 }
551
552 # both must be regular files
553 unless (-f $file1 && -f $file2) {
554 print STDERR "one file is not a regular file\n" if ($verbosity >= 2);
555 return 1;
556 }
557
558 # the size of the files must be the same
559 if ($file1stat[7] != $file2stat[7]) {
560 print STDERR "different sized files\n" if ($verbosity >= 2);
561 return 1;
562 }
563
564 # the second file cannot be older than the first
565 if ($file1stat[9] > $file2stat[9]) {
566 print STDERR "file is older\n" if ($verbosity >= 2);
567 return 1;
568 }
569
570 return 0;
571}
572
573
574sub get_tmp_filename
575{
576 my $file_ext = shift(@_) || undef;
577
578 my $opt_dot_file_ext = (defined $file_ext) ? ".$file_ext" : "";
579
580 my $tmpdir = filename_cat($ENV{'GSDLHOME'}, "tmp");
581 &mk_all_dir ($tmpdir) unless -e $tmpdir;
582
583 my $count = 1000;
584 my $rand = int(rand $count);
585 my $full_tmp_filename = &filename_cat($tmpdir, "F$rand$opt_dot_file_ext");
586
587 while (-e $full_tmp_filename) {
588 $rand = int(rand $count);
589 $full_tmp_filename = &filename_cat($tmpdir, "F$rand$opt_dot_file_ext");
590 $count++;
591 }
592
593 return $full_tmp_filename;
594}
595
596sub filename_to_regex {
597 my $filename = shift (@_);
598
599 # need to put single backslash back to double so that regex works
600 if ($ENV{'GSDLOS'} =~ /^windows$/i) {
601 $filename =~ s/\\/\\\\/g;
602 }
603 return $filename;
604}
605
606sub filename_cat {
607 my $first_file = shift(@_);
608 my (@filenames) = @_;
609
610# Useful for debugging
611# -- might make sense to call caller(0) rather than (1)??
612# my ($cpackage,$cfilename,$cline,$csubr,$chas_args,$cwantarray) = caller(1);
613# print STDERR "Calling method; $cfilename:$cline $cpackage->$csubr\n";
614
615 # Check for empty first filename
616 if ($first_file =~ /\S/) {
617 unshift(@filenames, $first_file);
618 }
619
620 my $filename = join("/", @filenames);
621
622 # remove duplicate slashes and remove the last slash
623 if ($ENV{'GSDLOS'} =~ /^windows$/i) {
624 $filename =~ s/[\\\/]+/\\/g;
625 } else {
626 $filename =~ s/[\/]+/\//g;
627 # DB: want a filename abc\de.html to remain like this
628 }
629 $filename =~ s/[\\\/]$//;
630
631 return $filename;
632}
633
634
635sub envvar_prepend {
636 my ($var,$val) = @_;
637
638 # do not prepend any value/path that's already in the environment variable
639 if ($ENV{'GSDLOS'} =~ /^windows$/i)
640 {
641 my $escaped_val = $val;
642 $escaped_val =~ s/\\/\\\\/g; # escape any Windows backslashes for upcoming regex
643 if($ENV{$var} !~ m/$escaped_val/) {
644 $ENV{$var} = "$val;".$ENV{$var};
645 }
646 }
647 else {
648 if($ENV{$var} !~ m/$val/) {
649 $ENV{$var} = "$val:".$ENV{$var};
650 }
651 }
652}
653
654sub envvar_append {
655 my ($var,$val) = @_;
656
657 # do not append any value/path that's already in the environment variable
658 if ($ENV{'GSDLOS'} =~ /^windows$/i)
659 {
660 my $escaped_val = $val;
661 $escaped_val =~ s/\\/\\\\/g; # escape any Windows backslashes for upcoming regex
662 if($ENV{$var} !~ m/$escaped_val/) {
663 $ENV{$var} .= ";$val";
664 }
665 }
666 else {
667 if($ENV{$var} !~ m/$val/) {
668 $ENV{$var} .= ":$val";
669 }
670 }
671}
672
673
674# splits a filename into a prefix and a tail extension using the tail_re, or
675# if that fails, splits on the file_extension . (dot)
676sub get_prefix_and_tail_by_regex {
677
678 my ($filename,$tail_re) = @_;
679
680 my ($file_prefix,$file_ext) = ($filename =~ m/^(.*?)($tail_re)$/);
681 if ((!defined $file_prefix) || (!defined $file_ext)) {
682 ($file_prefix,$file_ext) = ($filename =~ m/^(.*)(\..*?)$/);
683 }
684
685 return ($file_prefix,$file_ext);
686}
687
688# get full path and file only path from a base_dir (which may be empty) and
689# file (which may contain directories)
690sub get_full_filenames {
691 my ($base_dir, $file) = @_;
692
693 my $filename_full_path = $file;
694 # add on directory if present
695 $filename_full_path = &util::filename_cat ($base_dir, $file) if $base_dir =~ /\S/;
696
697 my $filename_no_path = $file;
698
699 # remove directory if present
700 $filename_no_path =~ s/^.*[\/\\]//;
701 return ($filename_full_path, $filename_no_path);
702}
703
704# returns the path of a file without the filename -- ie. the directory the file is in
705sub filename_head {
706 my $filename = shift(@_);
707
708 if ($ENV{'GSDLOS'} =~ /^windows$/i) {
709 $filename =~ s/[^\\\\]*$//;
710 }
711 else {
712 $filename =~ s/[^\\\/]*$//;
713 }
714
715 return $filename;
716}
717
718
719# returns 1 if filename1 and filename2 point to the same
720# file or directory
721sub filenames_equal {
722 my ($filename1, $filename2) = @_;
723
724 # use filename_cat to clean up trailing slashes and
725 # multiple slashes
726 $filename1 = filename_cat ($filename1);
727 $filename2 = filename_cat ($filename2);
728
729 # filenames not case sensitive on windows
730 if ($ENV{'GSDLOS'} =~ /^windows$/i) {
731 $filename1 =~ tr/[A-Z]/[a-z]/;
732 $filename2 =~ tr/[A-Z]/[a-z]/;
733 }
734 return 1 if $filename1 eq $filename2;
735 return 0;
736}
737
738sub filename_within_collection
739{
740 my ($filename) = @_;
741
742 my $collect_dir = $ENV{'GSDLCOLLECTDIR'};
743
744 if (defined $collect_dir) {
745 my $dirsep = &util::get_dirsep();
746 if ($collect_dir !~ m/$dirsep$/) {
747 $collect_dir .= $dirsep;
748 }
749
750 $collect_dir =~ s/\\/\\\\/g; # escape DOS style file separator
751
752 # if from within GSDLCOLLECTDIR, then remove directory prefix
753 # so source_filename is realative to it. This is done to aid
754 # portability, i.e. the collection can be moved to somewhere
755 # else on the file system and the archives directory will still
756 # work. This is needed, for example in the applet version of
757 # GLI where GSDLHOME/collect on the server will be different to
758 # the collect directory of the remove user. Of course,
759 # GSDLCOLLECTDIR subsequently needs to be put back on to turn
760 # it back into a full pathname.
761
762 if ($filename =~ /^$collect_dir(.*)$/) {
763 $filename = $1;
764 }
765 }
766
767 return $filename;
768}
769
770
771sub get_dirsep {
772
773 if ($ENV{'GSDLOS'} =~ /^windows$/i) {
774 return "\\";
775 } else {
776 return "\/";
777 }
778}
779
780sub get_os_dirsep {
781
782 if ($ENV{'GSDLOS'} =~ /^windows$/i) {
783 return "\\\\";
784 } else {
785 return "\\\/";
786 }
787}
788
789sub get_re_dirsep {
790
791 return "\\\\|\\\/";
792}
793
794
795sub get_dirsep_tail {
796 my ($filename) = @_;
797
798 # returns last part of directory or filename
799 # On unix e.g. a/b.d => b.d
800 # a/b/c => c
801
802 my $dirsep = get_re_dirsep();
803 my @dirs = split (/$dirsep/, $filename);
804 my $tail = pop @dirs;
805
806 # - caused problems under windows
807 #my ($tail) = ($filename =~ m/^(?:.*?$dirsep)?(.*?)$/);
808
809 return $tail;
810}
811
812
813# if this is running on windows we want binaries to end in
814# .exe, otherwise they don't have to end in any extension
815sub get_os_exe {
816 return ".exe" if $ENV{'GSDLOS'} =~ /^windows$/i;
817 return "";
818}
819
820
821# test to see whether this is a big or little endian machine
822sub is_little_endian
823{
824 # To determine the name of the operating system, the variable $^O is a cheap alternative to pulling it out of the Config module;
825 # If it is a Macintosh machine (i.e. the Darwin operating system), regardless if it's running on the IBM power-pc cpu or the x86 Intel-based chip with a power-pc emulator running on top of it, it's big-endian
826 # Otherwise, it's little endian
827
828 #return 0 if $^O =~ /^darwin$/i;
829 return 0 if $ENV{'GSDLOS'} =~ /^darwin$/i;
830 return (ord(substr(pack("s",1), 0, 1)) == 1);
831}
832
833
834# will return the collection name if successful, "" otherwise
835sub use_collection {
836 my ($collection, $collectdir) = @_;
837
838 if (!defined $collectdir || $collectdir eq "") {
839 $collectdir = &filename_cat ($ENV{'GSDLHOME'}, "collect");
840 }
841
842 # get and check the collection
843 if (!defined($collection) || $collection eq "") {
844 if (defined $ENV{'GSDLCOLLECTION'}) {
845 $collection = $ENV{'GSDLCOLLECTION'};
846 } else {
847 print STDOUT "No collection specified\n";
848 return "";
849 }
850 }
851
852 if ($collection eq "modelcol") {
853 print STDOUT "You can't use modelcol.\n";
854 return "";
855 }
856
857 # make sure the environment variables GSDLCOLLECTION and GSDLCOLLECTDIR
858 # are defined
859 $ENV{'GSDLCOLLECTION'} = $collection;
860 $ENV{'GSDLCOLLECTDIR'} = &filename_cat ($collectdir, $collection);
861
862 # make sure this collection exists
863 if (!-e $ENV{'GSDLCOLLECTDIR'}) {
864 print STDOUT "Invalid collection ($collection).\n";
865 return "";
866 }
867
868 # everything is ready to go
869 return $collection;
870}
871
872
873
874
875# will return the collection name if successful, "" otherwise.
876# Like use_collection (above) but for greenstone 3 (taking account of site level)
877
878sub use_site_collection {
879 my ($site, $collection, $collectdir) = @_;
880
881 if (!defined $collectdir || $collectdir eq "") {
882 die "GSDL3HOME not set.\n" unless defined $ENV{'GSDL3HOME'};
883 $collectdir = &filename_cat ($ENV{'GSDL3HOME'}, "sites", $site, "collect");
884 }
885
886 # collectdir explicitly set by this point (using $site variable if required).
887 # Can call "old" gsdl2 use_collection now.
888
889 return use_collection($collection,$collectdir);
890}
891
892
893
894sub locate_config_file
895{
896 my ($file) = @_;
897
898 my $locations = locate_config_files($file);
899
900 return shift @$locations; # returns undef if 'locations' is empty
901}
902
903
904sub locate_config_files
905{
906 my ($file) = @_;
907
908 my @locations = ();
909
910 if (-e $file) {
911 # Clearly specified (most likely full filename)
912 # No need to hunt in 'etc' directories, return value unchanged
913 push(@locations,$file);
914 }
915 else {
916 # Check for collection specific one before looking in global GSDL 'etc'
917 if (defined $ENV{'GSDLCOLLECTDIR'} && $ENV{'GSDLCOLLECTDIR'} ne "") {
918 my $test_collect_etc_filename
919 = &util::filename_cat($ENV{'GSDLCOLLECTDIR'},"etc", $file);
920
921 if (-e $test_collect_etc_filename) {
922 push(@locations,$test_collect_etc_filename);
923 }
924 }
925 my $test_main_etc_filename
926 = &util::filename_cat($ENV{'GSDLHOME'},"etc", $file);
927 if (-e $test_main_etc_filename) {
928 push(@locations,$test_main_etc_filename);
929 }
930 }
931
932 return \@locations;
933}
934
935
936sub hyperlink_text
937{
938 my ($text) = @_;
939
940 $text =~ s/(http:\/\/[^\s]+)/<a href=\"$1\">$1<\/a>/mg;
941 $text =~ s/(^|\s+)(www\.(\w|\.)+)/<a href=\"http:\/\/$2\">$2<\/a>/mg;
942
943 return $text;
944}
945
946
947# A method to check if a directory is empty (note that an empty directory still has non-zero size!!!)
948# Code is from http://episteme.arstechnica.com/eve/forums/a/tpc/f/6330927813/m/436007700831
949sub is_dir_empty
950{
951 my ($path) = @_;
952 opendir DIR, $path;
953 while(my $entry = readdir DIR) {
954 next if($entry =~ /^\.\.?$/);
955 closedir DIR;
956 return 0;
957 }
958 closedir DIR;
959 return 1;
960}
961
9621;
Note: See TracBrowser for help on using the repository browser.