root/main/trunk/greenstone3/build.xml @ 28952

Revision 28952, 134.4 KB (checked in by davidb, 5 years ago)

uname cmd exists only on unix/mac, so restricting get-isisgdl target to these OS, since mac and linux machines are the ones that need a 32 bit isis binary on a 64 bit machine.

Line 
1<?xml version="1.0"?>
2<!-- ======================================================================
3     March 2005                                                   
4
5     Greenstone3 build and install script
6                 
7     kjdon                                                               
8     ====================================================================== -->
9<project name="greenstone3" default="usage" basedir=".">
10  <echo>os.name: ${os.name}</echo>
11
12  <!-- ============ classpath =================== -->
13  <path id="project.classpath">
14    <fileset dir="lib/java">
15      <include name="**/*.jar"/>
16    </fileset>
17  </path>
18 
19  <!-- ============ self defined tasks =================== -->
20  <taskdef name="mysetproxy" classname="org.greenstone.anttasks.MySetProxy" classpathref="project.classpath"/>
21  <taskdef name="getuserandpassword" classname="org.greenstone.anttasks.MyGetUserAndPassword" classpathref="project.classpath"/>
22  <taskdef name="rsr" classname="org.greenstone.anttasks.RegexSearchReplace" classpathref="project.classpath"/>
23  <!--<taskdef name="svn" classname="org.tigris.subversion.svnant.SvnTask" classpathref="project.classpath"/>-->
24  <taskdef name="if" classname="ise.antelope.tasks.IfTask" classpathref="project.classpath"/>
25  <taskdef name="for" classname="net.sf.antcontrib.logic.ForTask" classpathref="project.classpath"/>
26  <taskdef name="stringutil" classname="ise.antelope.tasks.StringUtilTask" classpathref="project.classpath"/>
27
28 
29  <!-- ===================== Property Definitions =========================== -->
30 
31  <!--
32
33  Each of the following properties are used in the build script.
34  Values for these properties are set by the first place they are
35  defined, from the following list:
36
37  * Definitions on the "ant" command line (ant -Dfoo=bar compile).
38
39  * Definitions from a "build.properties" file in the top level
40  source directory of this application.
41
42  * Definitions from a "build.properties" file in the user's
43  home directory.
44
45  * Default definitions in this build.xml file.
46
47  You will note below that property values can be composed based on the
48  contents of previously defined properties.  This is a powerful technique
49  that helps you minimize the number of changes required when your development
50  environment is modified.  Note that property composition is allowed within
51  "build.properties" files as well as in the "build.xml" script.
52
53  -->
54
55  <property name="os.linux" value="Linux"/>
56  <property name="os.mac" value="Mac OS X"/>
57  <property name="os.solaris" value="SunOS"/>
58  <property name="os.unix" value="${os.linux},${os.mac},${os.solaris}"/>
59  <property name="os.windows" value="Windows 95,Windows 98,Windows 2000,Windows 2003,Windows XP,Windows NT,Windows ME,Windows Vista,Windows 7,Windows Server 2008,Windows Server 2008 R2"/> <!-- check this!!!-->
60
61  <!-- this is true for linux and macs -->
62  <condition property="current.os.isunix">
63    <os family="unix"/>
64  </condition>
65 
66  <condition property="current.os.isunixnotmac">
67    <and>
68      <os family="unix"/>
69      <not>
70    <os family="mac"/>
71      </not>
72    </and>
73  </condition>
74 
75  <condition property="current.os.ismac">
76    <os family="mac"/>
77  </condition>
78 
79  <condition property="current.os.iswindows">
80    <os family="windows"/>
81  </condition>
82
83  <!-- create build.properties if it has not been created yet -->
84  <if>
85    <bool><not><available file="build.properties"/></not></bool>
86    <copy file="build.properties.in" tofile="build.properties"/>
87  </if>
88
89  <!-- create the packages dir if it has not been created yet -->
90  <mkdir dir="packages"/>
91 
92  <!--the first three properties have to be put on the top to be used by build.properties-->
93  <property name="gs2build.home" value="${basedir}${file.separator}gs2build"/>
94  <property name="src.packages.home" value="${basedir}/src/packages"/>
95  <property name="flax.svn.root" value="http://svn.greenstone.org/flax"/>
96
97  <property name="solr-ext.home" value="${basedir}/ext/solr"/>
98
99  <property file="build.properties"/>
100  <if><bool><available file="${user.home}/build.properties"/></bool>
101    <property file="${user.home}/build.properties"/>
102  </if>
103
104  <!-- now we've read in properties, apply defaults -->
105  <property name="disable.collection.building" value="false"/>
106
107  <!-- get properties from the environment -->
108  <property environment="env"/>
109
110  <!-- get the filesets defining components and executables -->
111  <import file="resources/xml/components.xml"/>
112  <import file="resources/xml/executables.xml"/>
113   
114  <!-- version properties for external packages -->
115  <!-- for Java versions < 1.4, we print out the message that Java is too old.
116    For Java 1.4, we use Tomcat 5.5, for Java5 and higher, we use Tomcat 7.0-->
117  <condition property="tomcat.version" value="apache-tomcat-5.5.25" else="apache-tomcat-7.0.26">
118    <equals arg1="1.4" arg2="${ant.java.version}"/>
119  </condition>
120  <condition property="tomcat.version.major" value="5" else="7">
121    <equals arg1="1.4" arg2="${ant.java.version}"/>
122  </condition>
123  <condition property="privileged.attribute" value="privileged='true'" else="">
124    <equals arg1="7" arg2="${tomcat.version.major}"/>
125  </condition>
126
127  <property name="axis.zip.version" value="axis-bin-1_4.zip"/>
128  <property name="axis.dir.version" value="axis-1_4"/>
129  <property name="sqlite.targz.version" value="sqlite-autoconf-3070602.tar.gz"/>
130
131  <property name="build.home" value="${basedir}/build"/>
132  <property name="src.home" value="${basedir}/src/java"/>
133
134  <if><bool><istrue value="${gsdl3home.isreadonly}"/></bool>
135    <property name="readonly-packages.home" value="${basedir}/packages"/>
136    <property name="packages.home" value="${gsdl3.writablehome}/packages"/>
137  <else>
138    <property name="packages.home" value="${basedir}/packages"/>
139  </else>
140  </if>
141
142  <!-- this may be set in build.properties, e.g. if you move the web dir to
143       tomcats webapps directory -->
144  <property name="web.home" value="${basedir}/web"/>
145  <property name="web.writablehome" value="${gsdl3.writablehome}"/>
146
147  <!-- jar files needed by applets go here -->
148  <property name="web.applet" value="${web.home}/applet"/>
149
150  <!-- jar files needed by the servlet (and extra ones) go here -->
151  <property name="web.lib" value="${web.home}/WEB-INF/lib"/>
152  <property name="web.writablelib" value="${web.writablehome}/WEB-INF/lib"/>
153  <!-- other files needed by the servlet go here -->
154  <property name="web.classes" value="${web.home}/WEB-INF/classes"/>
155  <property name="web.writableclasses" value="${web.writablehome}/WEB-INF/classes"/>
156
157  <if>
158    <bool><istrue value="${gsdl3home.isreadonly}"/></bool>
159    <echo>Greenstone3 home directory is read-only</echo>
160    <echo>  => Writable area is: ${gsdl3.writablehome}</echo>
161
162    <condition property="gsdl3.writablehome.already-exists">
163      <available file="${gsdl3.writablehome}" type="dir"/>
164    </condition>
165
166    <if>
167      <bool><not><istrue value="${gsdl3.writablehome.already-exists}"/></not></bool>
168
169      <!-- set up writable area -->
170      <echo>No previous Greenstone home writable area detected</echo>
171      <echo>  => Setting up area</echo>
172      <mkdir dir="${gsdl3.writablehome}"/>
173      <mkdir dir="${gsdl3.writablehome}/packages"/>
174      <mkdir dir="${gsdl3.writablehome}/logs"/>
175      <mkdir dir="${gsdl3.writablehome}/ext/solr"/>
176
177      <chmod perm="a+rwx" dir="${gsdl3.writablehome}"/>
178      <chmod perm="a+rwx" dir="${gsdl3.writablehome}/packages"/>
179      <chmod perm="a+rwx" dir="${gsdl3.writablehome}/logs"/>
180      <chmod perm="a+rwx" dir="${gsdl3.writablehome}/ext/solr"/>
181
182      <!-- copy over packages tomcat folder -->
183
184      <if>
185    <bool><istrue value="${current.os.iswindows}"/></bool>
186    <copy todir="${gsdl3.writablehome}/packages/tomcat"
187          preservelastmodified="true"
188          failonerror="true" > 
189      <fileset dir="${readonly-packages.home}/tomcat" includes="**"/> 
190    </copy>
191     
192    <else>
193      <!-- else assume Unix -->
194      <!-- Can't go through the OS-independant <copy> task as it fails to preserve exec permissions -->
195      <echo>Copying to ${gsdl3.writablehome}/packages/tomcat</echo>
196      <exec executable="cp" output="/dev/null" spawn="false">
197            <arg value="-r"/>
198            <arg value="${readonly-packages.home}/tomcat"/>
199            <arg value="${gsdl3.writablehome}/packages/."/>
200      </exec>
201     
202    </else>
203      </if>
204     
205      <echo>  => Copying Greenstone's web/WEB-INF to writable area</echo>
206      <copy todir="${gsdl3.writablehome}/WEB-INF"
207        preservelastmodified="true"
208        failonerror="true" > 
209    <fileset dir="${web.home}/WEB-INF" includes="**"/> 
210      </copy>
211
212      <copy todir="${gsdl3.writablehome}"
213        preservelastmodified="true"
214        failonerror="true" > 
215    <fileset dir="${web.home}" includes="index.html"/> 
216      </copy>
217
218    </if>
219  </if>
220
221
222  <!--- flax: the WordNet home -->
223  <property name="wn.home" value="${web.home}/WEB-INF/classes/flax/WordNet"/>
224
225  <!-- jni libraries and java wrappers go here -->
226  <property name="lib.jni" value="${basedir}/lib/jni"/>
227
228  <!-- other jar files needed for installation (but not runtime) go here -->
229  <property name="lib.java" value="${basedir}/lib/java"/>
230 
231  <property name="javadocs" value="${basedir}/docs/javadoc"/>
232
233  <property name="app.name"      value="greenstone3"/>
234  <property name="app.path"      value="/${app.name}"/>
235
236   <property name="admin.dir"      value="${basedir}/admin"/>
237
238  <!-- defaults - set these on the command line or in build.properties or
239       they will take these default values-->
240  <property name="app.version" value="trunk"/>
241  <property name="branch.path" value="trunk"/>
242  <property name="branch.revision" value="HEAD"/>
243
244  <!--constants -->
245  <property name="svn.root" value="http://svn.greenstone.org"/>
246
247  <!-- catalina home is set to tomcat basedir if already installed, otherwise
248       use greenstone's tomcat -->
249  <condition property="catalina.home" value="${tomcat.installed.path}" else="${packages.home}/tomcat">
250    <and>
251      <isset property="tomcat.installed.path"/>
252      <not>
253    <equals arg1="" arg2="${tomcat.installed.path}"/>
254      </not>
255    </and>
256  </condition>
257 
258
259  <!-- is there a better way to do this?? what about solaris?? -->
260  <condition property="os.bin.dir" value="${cross.os}">
261      <istrue value="${compile.cross}"/>
262  </condition>
263  <condition property="os.bin.dir" value="windows">
264    <os family="windows"/>
265  </condition>
266  <condition property="os.bin.dir" value="darwin">
267    <os family="mac"/>
268  </condition>
269  <condition property="os.bin.dir" value="linux">
270    <and>
271      <os family="unix"/>
272      <not>
273    <os family="mac"/>
274      </not>
275    </and>
276  </condition>
277
278 
279  <condition property="collection.building.disabled">
280    <and>
281      <isset property="disable.collection.building"/>
282      <istrue value="${disable.collection.building}"/>
283    </and>
284  </condition>
285
286  <condition property="collection.building.enabled">
287    <not>
288      <istrue value="${disable.collection.building}"/>
289    </not>
290  </condition>
291 
292  <condition property="collection.building.enabled.windows">
293    <and>
294      <istrue value="${collection.building.enabled}"/>
295      <isset property="current.os.iswindows"/>
296    </and>
297  </condition>
298 
299  <condition property="collection.building.enabled.unix">
300    <and>
301      <istrue value="${collection.building.enabled}"/>
302      <isset property="current.os.isunix"/>
303    </and>
304  </condition>
305
306  <condition property="static.arg" value="LDFLAGS=-static" else=" ">
307    <isset property="compile.static"/>
308  </condition>
309
310  <!-- If building a release then we want to adjust environment variables so that the support library can be seen during compilation -->
311  <if><bool><isset property="use.gnomelib.ext"/></bool>
312    <property name="gnome-lib-dir" value="${basedir}/ext/gnome-lib-minimal/${os.bin.dir}"/>
313
314    <if><bool><isset property="env.CFLAGS"/></bool>
315        <property name="cflags.arg" value="CFLAGS=&quot;-I${gnome-lib-dir}/include ${env.CFLAGS}&quot;"/>
316    <else>
317        <property name="cflags.arg" value="CFLAGS=&quot;-I${gnome-lib-dir}/include&quot;"/>
318    </else>
319    </if>
320
321    <if><bool><isset property="env.CPPFLAGS"/></bool>
322        <property name="cppflags.arg" value="CPPFLAGS=&quot;-I${gnome-lib-dir}/include ${env.CPPFLAGS}&quot;"/>
323    <else>
324        <property name="cppflags.arg" value="CPPFLAGS=&quot;-I${gnome-lib-dir}/include&quot;"/>
325    </else>
326    </if>
327
328    <if><bool><isset property="env.CXXFLAGS"/></bool>
329        <property name="cxxflags.arg" value="CXXFLAGS=&quot;-I${gnome-lib-dir}/include ${env.CXXFLAGS}&quot;"/>
330    <else>
331            <property name="cxxflags.arg" value="CXXFLAGS=&quot;-I${gnome-lib-dir}/include&quot;"/>
332    </else>
333    </if>
334
335    <if><bool><isset property="env.LDFLAGS"/></bool>
336        <property name="ldflags.arg" value="LDFLAGS=&quot;-L${gnome-lib-dir}/lib ${env.LDFLAGS}&quot;"/>
337    <else>
338            <property name="ldflags.arg" value="LDFLAGS=&quot;-L${gnome-lib-dir}/lib&quot;"/>
339    </else>
340    </if>
341
342    <if><bool><isset property="env.PATH"/></bool>
343        <property name="path.arg" value="PATH=&quot;${gnome-lib-dir}/bin:${env.PATH}&quot;"/>
344    <else>
345            <property name="path.arg" value="PATH=&quot;${gnome-lib-dir}/bin&quot;"/>
346    </else>
347    </if>
348
349    <if><bool><isset property="env.PKG_CONFIG_PATH"/></bool>
350        <property name="pcpath.arg" value="PKG_CONFIG_PATH=&quot;${gnome-lib-dir}/lib/pkgconfig:${env.PKG_CONFIG_PATH}&quot;"/>
351    <else>
352            <property name="pcpath.arg" value="PKG_CONFIG_PATH=&quot;${gnome-lib-dir}/lib/pkgconfig&quot;"/>
353    </else>
354    </if>
355
356    <if><bool><equals arg1="${os.bin.dir}" arg2="darwin"/></bool>
357        <if><bool><isset property="env.DYLD_LIBRARY_PATH"/></bool>
358            <property name="ldlpath.arg" value="DYLD_LIBRARY_PATH=&quot;${gnome-lib-dir}/lib:${env.DYLD_LIBRARY_PATH}&quot;"/>
359        <else>
360            <property name="ldlpath.arg" value="DYLD_LIBRARY_PATH=&quot;${gnome-lib-dir}/lib&quot;"/>
361        </else>
362        </if>
363    <else>
364        <if><bool><isset property="env.LD_LIBRARY_PATH"/></bool>
365            <property name="ldlpath.arg" value="LD_LIBRARY_PATH=&quot;${gnome-lib-dir}/lib:${env.LD_LIBRARY_PATH}&quot;"/>
366        <else>
367            <property name="ldlpath.arg" value="LD_LIBRARY_PATH=&quot;${gnome-lib-dir}/lib&quot;"/>
368        </else>
369        </if>
370    </else>
371    </if>
372
373    <else>
374        <if><bool><isset property="env.CFLAGS"/></bool>
375            <property name="cflags.arg" value="CFLAGS=&quot;${env.CFLAGS}&quot;"/>
376            <else>
377            <property name="cflags.arg" value=" "/>
378        </else>
379        </if>
380
381        <if><bool><isset property="env.CPPFLAGS"/></bool>
382                <property name="cppflags.arg" value="CPPFLAGS=&quot;${env.CPPFLAGS}&quot;"/>
383            <else>
384            <property name="cppflags.arg" value=" "/>
385        </else>
386        </if>
387
388        <if><bool><isset property="env.CXXFLAGS"/></bool>
389            <property name="cxxflags.arg" value="CXXFLAGS=&quot;${env.CXXFLAGS}&quot;"/>
390        <else>
391            <property name="cxxflags.arg" value=" "/>
392        </else>
393        </if>
394
395        <if><bool><isset property="env.LDFLAGS"/></bool>
396            <property name="ldflags.arg" value="LDFLAGS=&quot;${env.LDFLAGS}&quot;"/>
397        <else>
398            <property name="ldflags.arg" value=" "/>
399        </else>
400        </if>
401
402        <if><bool><isset property="env.PATH"/></bool>
403            <property name="path.arg" value="PATH=&quot;${env.PATH}&quot;"/>
404        <else>
405            <property name="path.arg" value=" "/>
406        </else>
407        </if>
408
409        <if><bool><isset property="env.PKG_CONFIG_PATH"/></bool>
410            <property name="pcpath.arg" value="PKG_CONFIG_PATH=&quot;${env.PKG_CONFIG_PATH}&quot;"/>
411        <else>
412            <property name="pcpath.arg" value=" "/>
413        </else>
414        </if>
415
416        <if><bool><equals arg1="${os.bin.dir}" arg2="darwin"/></bool>
417            <if><bool><isset property="env.DYLD_LIBRARY_PATH"/></bool>
418                <property name="ldlpath.arg" value="DYLD_LIBRARY_PATH=&quot;${env.DYLD_LIBRARY_PATH}&quot;"/>
419            <else>
420                <property name="ldlpath.arg" value=" "/>
421            </else>
422            </if>
423        <else>
424            <if><bool><isset property="env.LD_LIBRARY_PATH"/></bool>
425                <property name="ldlpath.arg" value="LD_LIBRARY_PATH=&quot;${env.LD_LIBRARY_PATH}&quot;"/>
426            <else>
427                <property name="ldlpath.arg" value=" "/>
428            </else>
429            </if>
430        </else> 
431        </if>
432    </else>
433  </if>
434  <property name="allargs" value="${cflags.arg} ${cxxflags.arg} ${cppflags.arg} ${ldflags.arg} ${path.arg} ${ldlpath.arg} ${pcpath.arg}"/>
435
436  <condition property="opt.cross.build"
437         value="--build=${cross.build}" else=" ">
438    <isset property="cross.build"/>
439  </condition>
440
441
442  <condition property="cross.configure.args"
443         value="--host=${cross.host} ${opt.cross.build} CPP=${cross.host}-cpp CC=${cross.host}-gcc CXX=${cross.host}-g++ LD=${cross.host}-ld AR=${cross.host}-ar RANLIB=${cross.host}-ranlib STRIP=${cross.host}-strip ${cross.configure.extraargs} crossOS=${cross.os}" else=" ">
444    <istrue value="${compile.cross}"/>
445  </condition>
446
447  <!-- if we're told to work with gnome-lib, or if there's a gnome-lib-minimal that the user
448       has placed in gs2build/ext, then compile gs2build after sourcing gnome-lib environment -->
449  <condition property="opt.gnomelibext.arg"
450         value="--enable-gnome-lib-ext" else=" ">
451    <or>
452      <available file="${gs2build.home}/ext/gnome-lib-minimal" type="dir"/>
453      <istrue value="${use.gnomelib.ext}"/>
454      <istrue value="${checkout.gnomelib.ext}"/>
455    </or>
456   </condition>
457
458<!-- if you want to disable wvware, do so here: set the value (not else) field to contain minus-minus-disable-wvware -->
459  <condition property="gs2.opt.args" value="${opt.gnomelibext.arg} " else="--disable-mg --disable-mgpp --disable-accentfold --disable-gdbm --disable-sqlite">
460    <istrue value="${with.jni}"/>
461  </condition>
462  <condition property="gs2.compile.target" value="with-jni" else="without-jni">
463    <istrue value="${with.jni}"/>
464  </condition>
465  <condition property="gs2.install.target" value="install-with-jni" else="install-without-jni">
466    <istrue value="${with.jni}"/>
467  </condition>
468  <condition property="gs2.windows.enablejni" value="1" else="0">
469    <istrue value="${with.jni}"/>
470  </condition>
471  <condition property="gs2.windows.enablemg" value="1" else="0">
472    <istrue value="${with.jni}"/>
473  </condition>
474  <condition property="gs2.windows.enablemgpp" value="1" else="0">
475    <istrue value="${with.jni}"/>
476  </condition>
477  <!-- Should accent folding not also be set here ?? -->
478  <condition property="gs2.windows.usegdbm" value="1" else="0">
479    <istrue value="${with.jni}"/>
480  </condition>
481  <condition property="gs2.windows.usesqlite" value="1" else="0">
482    <istrue value="${with.jni}"/>
483  </condition>
484 
485  <!-- where is search4j tool -->
486  <condition property="search4j.exec" value="bin/search4j.exe" else="bin/search4j">
487    <isset property="current.os.iswindows"/>
488  </condition>
489
490 
491  <!-- ============= Base dirs for each package and component ============ -->
492  <property name="src.gsdl3.home" value="${src.home}/org/greenstone/gsdl3"/>
493  <property name="anttasks.home" value="${src.home}/org/greenstone/anttasks"/>
494  <property name="gli.home" value="${basedir}/gli"/>
495  <property name="javagdbm.home" value="${src.packages.home}/javagdbm"/>
496
497  <condition property="common.src.home" value="${basedir}/common-src" else="${gs2build.home}${file.separator}common-src">
498    <istrue value="${disable.collection.building}"/>
499  </condition>
500 
501  <property name="build.src.home" value="${gs2build.home}/build-src"/>
502  <property name="gdbm.home" value="${common.src.home}/packages/gdbm"/>
503  <property name="mg.home" value="${common.src.home}/indexers/mg"/>
504  <property name="mgpp.home" value="${common.src.home}/indexers/mgpp"/>
505  <property name="lucene.home" value="${common.src.home}/indexers/lucene-gs"/>
506
507  <!--  ==================== Compilation Control Options ==================== -->
508
509  <!--
510
511  These properties control option settings on the Javac compiler when it
512  is invoked using the <javac> task.
513
514  compile.debug        Should compilation include the debug option?
515
516  compile.deprecation  Should compilation include the deprecation option?
517
518  compile.optimize     Should compilation include the optimize option?
519
520  -->
521
522  <property name="compile.debug"       value="true"/>
523  <property name="compile.deprecation" value="true"/>
524  <property name="compile.optimize"    value="true"/>
525  <property name="compile.includeantruntime" value="false"/> <!-- to get rid of annoying 'ant' warning -->
526
527  <!--
528
529  Rather than relying on the CLASSPATH environment variable, Ant includes
530  features that makes it easy to dynamically construct the classpath you
531  need for each compilation.  The example below constructs the compile
532  classpath to include the servlet.jar file, as well as the other components
533  that Tomcat makes available to web applications automatically, plus anything
534  that you explicitly added.
535
536  -->
537 
538  <!-- All elements that Tomcat 5 exposes to applications -->
539  <path id="tomcat5">
540    <pathelement location="${catalina.home}/common/classes"/>
541    <fileset dir="${catalina.home}/common/endorsed">
542      <include name="*.jar"/>
543    </fileset>
544    <fileset dir="${catalina.home}/common/lib">
545      <include name="*.jar"/>
546    </fileset>
547    <!-- seems to be empty, but will leave in just in case some people make use of this to customise their install: -->
548    <pathelement location="${catalina.home}/shared/classes"/>
549    <fileset dir="${catalina.home}/shared/lib">
550      <include name="*.jar"/>
551    </fileset>
552  </path>
553 
554  <!-- All elements that Tomcat 7 exposes to applications -->
555  <path id="tomcat7">
556    <fileset dir="${catalina.home}/lib">
557      <include name="*.jar"/>
558    </fileset>
559  </path>
560 
561  <path id="compile.classpath">
562    <!-- Include all jar files and libraries in our jni lib directory -->
563    <pathelement location="${lib.jni}"/>
564    <fileset dir="${lib.jni}">
565      <include name="*.jar"/>
566    </fileset>
567    <!-- Include all jar files in our web lib directory -->
568    <pathelement location="${web.lib}"/>
569    <fileset dir="${web.lib}">
570      <include name="*.jar"/>
571    </fileset>
572   
573    <pathelement location="${lib.java}"/>
574    <fileset dir="${lib.java}">
575      <include name="*.jar"/>
576    </fileset>
577   
578    <!-- include the jar files from the source packages -->
579    <!-- mg and mgpp get installed into lib/jni but they may not be there yet
580    so we add them in by name -->
581    <!-- *** is there any way to make this optional, based on ${with.jni}? -->
582    <pathelement location="${lib.jni}/mg.jar"/>
583    <pathelement location="${lib.jni}/mgpp.jar"/>
584   
585    <!-- Include all elements that Tomcat exposes to applications -->
586    <path refid="tomcat${tomcat.version.major}"/>
587   
588  </path>
589
590  <path id="local.tomcat.classpath">
591    <!-- explicitly include the jni java wrappers in the classpath -->
592    <pathelement location="${lib.jni}"/>
593    <fileset dir="${lib.jni}">
594      <include name="*.jar"/>
595    </fileset>
596   
597    <pathelement location="${web.writablelib}"/>
598    <fileset dir="${web.writablelib}">
599      <include name="derby.jar"/>
600    </fileset>
601  </path>
602 
603  <path id="local.tomcat.path">
604    <pathelement location="${basedir}/bin/script"/>
605    <pathelement location="${basedir}/bin"/>
606    <pathelement location="${lib.jni}"/>
607    <pathelement path="${env.PATH}"/>
608    <pathelement path="${env.Path}"/>
609    <pathelement path="${wn.home}/bin"/>
610  </path>
611
612  <target name="test-setup">
613    <echo>ant java version=${ant.java.version}</echo>
614    <echo>is unix : ${current.os.isunix}</echo>
615    <echo>is mac : ${current.os.ismac}</echo>
616    <echo>is unixnotmac : ${current.os.isunixnotmac}</echo>
617    <echo>is windows : ${current.os.iswindows}</echo>
618    <echo>os.unix: ${os.unix}</echo>
619  </target>
620
621  <!-- Appends the current env to the file environment.txt. For debugging env vars used by the release-kit. -->
622  <target name="write-env">
623    <echo message="*****************ENVIRONMENT OUTPUT:****************${line.separator}" file="environment.txt" append="true" />
624
625    <if><bool><istrue value="${current.os.iswindows}"/></bool>
626      <exec executable="set" dir="${basedir}" failonerror="false" output="environment.txt" append="true" />     
627      <else>
628    <exec executable="env" dir="${basedir}" failonerror="false" output="environment.txt" append="true" />
629      </else>
630    </if>
631
632    <echo message="${line.separator}" file="environment.txt" append="true" />
633  </target>
634
635 
636  <!-- ==================== Primary and Global Targets ============================= -->
637
638  <target name="prepare" depends="accept-properties,init,copy-dot-in-files,prepare-core,prepare-packages,prepare-common-src,prepare-collection-building,prepare-tomcat,prepare-axis,prepare-web,prepare-collections, prepare-flax"
639    description="Use this when you first checkout the code: 'ant prepare install'. This will do some additional subversion checkouts and downloads, so you need to be online to run this.">
640
641    <!-- make sure .sh files are executable -->
642    <chmod dir="${basedir}" perm="ugo+rx"
643      includes="*.sh"/>
644    <chmod dir="${basedir}/bin/script" perm="ugo+rx"
645      includes="*.sh,*.pl"/>
646  </target>
647
648  <!-- install-common-src and install-collection-building are mutually exclusive and either one or the other will be done depending on whether collection building is enabled or not -->
649  <!--before configuring build-src, make sure that gnome-lib is compiled up-->
650  <target name="install" depends="init,compile-imagemagick,compile-gnome-lib,install-common-src,install-collection-building,install-runtime,install-solr-ext,setup-for-eclipse,get-isisgdl"
651    description="Install Greenstone 3. Use this when you first checkout the code: 'ant prepare new-install'."/>
652
653  <target name="install-common-src" depends="init"
654    description="Install (configure, compile, install) only the common-src package (shared code from Greenstone 2). " >
655    <antcall target="configure-common-src"/>
656    <antcall target="compile-common-src"/>
657    <antcall target="install-auxiliary-jar-files"/>
658    <antcall target="install-jni-files"/>
659  </target>
660
661  <target name="install-collection-building" depends="init" if="collection.building.enabled"
662    description="Install (configure, compile, install) the Greenstone 2 collection building package." >
663    <antcall target="configure-collection-building"/>
664    <antcall target="tweak-makefiles" />
665    <antcall target="compile-collection-building"/>
666  </target>
667   
668
669  <target name="install-runtime" depends="init,configure,configure-packages,configure-core,compile-web,compile-packages,compile-core,compile-classpath-jars"
670    description="Install (configure, compile, install) the runtime system. Needs either common-src or collection-building to have been installed first." />
671   
672  <target name="svnupdate" depends="init,svnupdate-packages,svnupdate-core,svnupdate-common-src,svnupdate-collection-building,svnupdate-web"
673    description="Do a `svn update` for all sources. Doesn't recompile the code. You need to be online to run this."/>
674 
675  <target name="configure" depends="init,configure-tomcat,configure-web"
676    description="Configure the installation (not the C++ code). Includes setting up config files. Should be re-run if you change the build.properties file, including if you change the port number."/>
677
678  <target name="clean" depends="init,clean-packages,clean-core,clean-common-src,clean-collection-building,clean-classpath-jars"
679    description="Remove all old compiled code. Includes runtime and collection-building if necessary"/>
680 
681  <target name="distclean" depends="init,distclean-packages,clean-core,distclean-common-src,distclean-collection-building,clean-classpath-jars"
682    description="Remove all compiled code and also any Makefiles etc generated during configure-c++. Includes runtime and collection-building as necessary"/>
683 
684  <target name="update" depends="init,svnupdate,clean,install"
685    description="Update (thru Subversion) all the source (including common-src or collection-building, and runtime), then clean, and re-install. To do this without any SVN updates, run it like 'ant -Dnosvn.mode=yes update'"/>
686
687
688  <target name="perl-for-building" depends="init">
689    <!-- uses perl.path if set in build.properties, otherwise try for
690         environment variable PERLPATH, and failing that assumes 'perl'
691         is on environment PATH -->
692    <!-- if, outside build.properties, we only set perl.path if we have gs2build/build-src (collection building), then we won't set perl.path in a (flax) binary, since it doesn't have build-src -->
693    <if><bool><available file="${gs2build.home}"/></bool>
694
695      <if><bool><not><isset property="perl.path"/></not></bool>
696
697        <if>
698          <bool>
699            <and>
700              <isset property="env.PERLPATH"/>
701              <not><equals arg1="${env.PERLPATH}" arg2=""/></not>
702            </and>
703          </bool>
704          <!-- set perlpath to env.PERLPATH.
705            This is the path to perl\bin that's found by findperl.bat when the server is launched
706            through GLI instead of the console.
707            For windows, this env.PERLPATH is the bin folder and needs a backslash at end, since it
708            will appear suffixed with "perl.exe" in the perl setting in packages\tomcat\config\web.xml.
709            This web.xml's path to perl is then used to find perl when running the perl scripts in the
710            cgi folder, so without a slash appended at this point it becomes "binperl" in web.xml, and
711            things will break when GLI launches the server on Windows and the online GS3 metadata editor
712            is used to save user-edited metadata. -->
713          <if><bool><istrue value="${current.os.iswindows}"/></bool>
714            <property name="perl.path" value="${env.PERLPATH}\"/>
715          <else>
716            <property name="perl.path" value="${env.PERLPATH}"/>
717          </else>   
718          </if>
719         
720          <else>
721            <echo>
722  Using PATH environment variable to locate Perl.
723            </echo>
724            <exec executable="which" os="${os.unix}" spawn="false" outputproperty="full.perl.path">
725              <arg value="perl" />
726            </exec>
727
728        <exec executable="${gs2build.home}/bin/windows/which" osfamily="windows" spawn="false" outputproperty="full.perl.path">
729              <arg value="perl" />
730            </exec>
731
732            <stringutil string="${full.perl.path}" property="partial.perl.path">
733                <replace regex="\/[^\/]*$" replacement="/" />
734            </stringutil>
735        <stringutil string="${partial.perl.path}" property="perl.path">
736                <replace regex="\\[^\\]*$" replacement="\\" />
737            </stringutil>
738            <if><bool><istrue value="${current.os.isunix}"/></bool>
739              <if><bool><not><equals arg1="${full.perl.path}" arg2="/usr/bin/perl"/></not></bool>
740                <echo>
741    Non-standard location of Perl found: ${full.perl.path}
742    Set the environment variable PERLPATH or the perl.path property in
743    build.properties to explicitly control the version of Perl used.
744                </echo>
745              </if>
746            </if>
747          </else>
748        </if>
749      </if>
750
751      <!-- full.perl.path is for pretty-printing only, e.g. used in target "start" -->
752      <if><bool><isset property="perl.path"/></bool>
753        <property name="full.perl.path" value="${perl.path}${file.separator}perl"/>
754        <else>
755          <property name="full.perl.path" value="perl (will use the enviroment variable PATH to find this executable)"/>
756        </else>
757      </if>
758
759      <!-- gs2build not available, perl.path -->
760      <else>
761    <property name="perl.path" value=""/>
762      </else>
763    </if>
764    <stringutil string="${perl.path}" property="escaped.perl.path">
765      <replace regex="\\" replacement="\\\\" />
766    </stringutil>
767  </target>
768
769  <target name="get-default-servlet-url">
770    <echo>http://${tomcat.server}:${tomcat.port}${app.path}${server.default.servlet}</echo>
771  </target>
772 
773  <target name="start" depends="init,configure-tomcat,configure-web,configure-solr-ext,start-tomcat"
774    description="Startup the Tomcat server." >
775    <echo>${app.name} (${app.version}) server running using Apache Tomcat and Java</echo>
776    <echo>Tomcat: ${catalina.home}</echo>
777    <echo>Java  : ${java.home}</echo>
778    <if><bool><available file="${build.src.home}"/></bool>
779      <echo>Perl  : ${full.perl.path}</echo>
780    </if>
781    <if><bool><isset property="install.flax"/></bool>
782        <property name="url" value="http://${tomcat.server}:${tomcat.port}${app.path}/flax"/>
783    <else>
784        <property name="url" value="http://${tomcat.server}:${tomcat.port}${app.path}/"/>
785    </else>
786    </if>
787    <echo>URL   : ${url}</echo>
788    <!-- assuming that index.html is not needed here -->   
789
790    <!--Now write out the url with oaiserver suffix as the baseURL property in OAIConfig.xml-->
791    <available file="${basedir}/resources/oai/OAIConfig.xml" property="oaiconfig.present"/>
792    <antcall target="init-oaiconfig">
793      <param name="url" value="${url}"/>
794    </antcall>
795  </target>
796
797  <target name="init-oaiconfig" if="oaiconfig.present">
798    <echo>Writing out baseURL ${url}oaiserver to ${web.writableclasses}/OAIConfig.xml</echo>
799    <copy file="${basedir}/resources/oai/OAIConfig.xml" tofile="${web.writableclasses}/OAIConfig.xml"/>
800    <rsr verbosity="1" file="${web.writableclasses}/OAIConfig.xml" pattern="&lt;baseURL&gt;.*&lt;/baseURL&gt;" replacement="&lt;baseURL&gt;${url}oaiserver&lt;/baseURL&gt;" />   
801  </target>
802
803  <target name="stop" depends="init,stop-tomcat"
804    description="Shutdown the Tomcat server."/>
805 
806  <target name="restart" description="Shutdown and restart Tomcat"  depends="init,stop,start"/>
807
808  <!-- =========== Help targets ===================================  -->
809 
810  <property name="install-command" value="ant [options] prepare install"/>
811 
812  <target name="usage" description="Print a help message">
813    <echo message="  Execute 'ant -projecthelp' for a list of targets."/>
814    <echo message="  Execute 'ant -help' for Ant help."/>
815    <echo>
816  To install Greenstone3, run '${install-command}'.
817    There are properties defined in build.properties. The install
818      process will ask you if these properties are set correctly.
819      To avoid this prompt, use the '-Dproperties.accepted=yes'
820      option.
821    To log the output, use the '-logfile build.log' option.
822  The README.txt file has more information about the ant targets
823    and install process.
824    </echo>
825  </target>
826 
827  <target name="help" depends="usage" description="Print a help message"/>
828 
829  <target name="debug" depends="init" description="Display all the currently used properties">
830    <echoproperties/>
831  </target>
832
833  <!-- ====== initialization and setup targets ================== -->
834
835  <target name="accept-properties" unless="properties.accepted">
836    <input addproperty="properties.ok" validargs="y,n">The following properties (among others) are being used from a build.properties file found in this directory:
837      tomcat.server=${tomcat.server}
838      tomcat.port=${tomcat.port}
839      tomcat.installed.path=${tomcat.installed.path} (this is the location of Tomcat's base dir if it is already installed)
840      proxy.host=${proxy.host}
841      proxy.port=${proxy.port}
842      disable.collection.building=${disable.collection.building}
843      If these are not acceptable, please change them and rerun this target. Continue [y/n]?
844    </input>
845    <condition property="do.abort">
846      <equals arg1="n" arg2="${properties.ok}"/>
847    </condition>
848    <fail if="do.abort">Build aborted by user. Please change your properties settings and re-run the target</fail>
849  </target>
850 
851  <!-- this sets up some initial properties -->
852  <target name="init">
853
854    <!-- has the gs3-setup script been run?? -->
855    <condition property="gs3-setup-not-done">
856      <not>
857    <isset property="env.GSDL3HOME"/>
858      </not>
859    </condition>
860
861    <!--<fail if="gs3-setup-not-done" message="please run 'gs3-setup' (Windows) or 'source gs3-setup.sh' (Linux/Mac) before running this target."/>-->
862   
863    <condition property="java.too.old">
864      <or>
865        <equals arg1="1.1" arg2="${ant.java.version}"/>
866        <equals arg1="1.2" arg2="${ant.java.version}"/>
867        <equals arg1="1.3" arg2="${ant.java.version}"/>
868      </or>
869    </condition>
870    <fail if="java.too.old" message="You need Java 1.4 or greater to run Greenstone 3"/>
871   
872    <available file="${basedir}/gli" property="gli.present"/>
873    <available file="${basedir}/common-src" property="common.src.present"/>
874    <available file="${basedir}/gs2build" property="gs2build.present"/>
875    <available file="${gnome-lib-dir}" property="gnome-lib.present"/>
876
877    <condition property="tomcat.islocal">
878      <or>
879        <not><isset property="tomcat.installed.path"/></not>
880        <equals arg1="" arg2="${tomcat.installed.path}"/>
881      </or>
882    </condition>
883   
884    <echo>tomcat.port = ${tomcat.port}</echo>
885
886    <condition property="proxy.present">
887      <and>
888        <isset property="proxy.host"/>
889        <not><equals arg1="" arg2="${proxy.host}"/></not>
890      </and>
891    </condition>
892
893    <!--
894    the next block checks if the bundled tomcat is present in the 'packages' directory,
895    and checks for the lethal combination of tomcat 7 and java 1.4. Test for
896    tomcat6 is based on the presence of a file inserted by greenstone into the tomcat6
897    download, as there is no other surefire way to check tomcat version under java 1.4
898    -->
899    <condition property="packages.tomcat.ispresent" value="true" else="false">
900      <available file="packages/tomcat"/>
901    </condition>
902    <condition property="packages.tomcat.istomcat7" value="true" else="false">
903      <available file="packages/tomcat/tomcat7.txt"/>
904    </condition>
905    <if>
906      <bool>
907        <and>
908          <istrue value="${packages.tomcat.ispresent}"/>
909          <istrue value="${packages.tomcat.istomcat7}"/>
910          <equals arg1="1.4" arg2="${ant.java.version}"/>
911        </and>
912      </bool>
913      <fail>Your Java (version 1.4) is too old to work with the bundled Apache Tomcat (version 6). Please upgrade to Java version 1.5 or greater. Alternatively, you may remove the bundled Apache Tomcat from the 'packages' folder and then run 'ant prepare-tomcat'.</fail>
914    </if>
915
916  </target>
917
918  <target name="setup-proxy" depends="init" if="proxy.present">
919    <condition property="ask.user">
920      <or>
921        <equals arg1="" arg2="${proxy.user}"/>
922        <equals arg1="" arg2="${proxy.password}"/>
923      </or>
924    </condition>
925   
926    <getuserandpassword message="Using proxy: ${proxy.host}:${proxy.port}" if="ask.user" username="${proxy.user}" userproperty="proxy.username" pwordproperty="proxy.password"/>
927    <mysetproxy proxyhost="${proxy.host}" proxyport="${proxy.port}" proxyuser="${proxy.username}" proxypassword="${proxy.password}"/>
928  </target>
929 
930  <target name="copy-dot-in-files" depends="init"
931      description="Copies all resources .in files to version without the .in suffix" >
932    <if><bool><available file="${basedir}/resources/tomcat/greenstone3.xml"/></bool>
933      <copy file="${basedir}/resources/tomcat/greenstone3.xml" tofile="${basedir}/resources/tomcat/greenstone3.xml.backup"  overwrite="true"/>
934    </if>
935   
936    <copy file="${basedir}/resources/tomcat/greenstone3.xml.in" tofile="${basedir}/resources/tomcat/greenstone3.xml"  overwrite="true"/>
937    <if><bool><available file="${basedir}/resources/tomcat/server_tomcat5.xml"/></bool>
938      <copy file="${basedir}/resources/tomcat/server_tomcat5.xml" tofile="${basedir}/resources/tomcat/server_tomcat5.xml.backup"  overwrite="true"/>
939    </if>
940    <copy file="${basedir}/resources/tomcat/server_tomcat5.xml.in" tofile="${basedir}/resources/tomcat/server_tomcat5.xml"  overwrite="true"/>
941    <if><bool><available file="${basedir}/resources/tomcat/server_tomcat7.xml"/></bool>
942      <copy file="${basedir}/resources/tomcat/server_tomcat7.xml" tofile="${basedir}/resources/tomcat/server_tomcat7.xml.backup"  overwrite="true"/>
943    </if>
944    <copy file="${basedir}/resources/tomcat/server_tomcat7.xml.in" tofile="${basedir}/resources/tomcat/server_tomcat7.xml" overwrite="true"/>
945    <if><bool><available file="${basedir}/resources/tomcat/web.xml"/></bool>
946      <copy file="${basedir}/resources/tomcat/web.xml" tofile="${basedir}/resources/tomcat/web.xml.backup"  overwrite="true"/>
947    </if>
948    <copy file="${basedir}/resources/tomcat/web.xml.in" tofile="${basedir}/resources/tomcat/web.xml"  overwrite="true"/>
949    <if><bool><available file="${basedir}/resources/oai/OAIConfig.xml"/></bool>
950    <copy file="${basedir}/resources/oai/OAIConfig.xml" tofile="${basedir}/resources/oai/OAIConfig.xml.backup"  overwrite="true"/>
951    </if>
952    <copy file="${basedir}/resources/oai/OAIConfig.xml.in" tofile="${basedir}/resources/oai/OAIConfig.xml"  overwrite="true"/>
953    <if><bool><available file="${basedir}/resources/cgi/gsdl3site.cfg"/></bool>
954      <copy file="${basedir}/resources/cgi/gsdl3site.cfg" tofile="${basedir}/resources/cgi/gsdl3site.cfg.backup" overwrite="true"/>
955    </if>
956    <copy file="${basedir}/resources/cgi/gsdl3site.cfg.in" tofile="${basedir}/resources/cgi/gsdl3site.cfg" overwrite="true"/>
957    <if><bool><available file="${basedir}/resources/web/global.properties"/></bool>
958    <copy file="${basedir}/resources/web/global.properties" tofile="${basedir}/resources/web/global.properties.backup" overwrite="true"/>
959    </if>
960    <copy file="${basedir}/resources/web/global.properties.in" tofile="${basedir}/resources/web/global.properties" overwrite="true"/>
961    <if><bool><available file="${basedir}/resources/web/log4j.properties"/></bool>
962    <copy file="${basedir}/resources/web/log4j.properties" tofile="${basedir}/resources/web/log4j.properties.backup" overwrite="true"/>
963    </if>
964    <copy file="${basedir}/resources/web/log4j.properties.in" tofile="${basedir}/resources/web/log4j.properties" overwrite="true"/>
965  </target>
966  <!-- ========== Web app Targets ================================ -->
967 
968  <target name="prepare-web" depends="init">
969    <mkdir dir="${web.writablehome}/applet"/>
970    <mkdir dir="${web.writablehome}/logs"/>
971    <mkdir dir="${web.writablehome}/logs/tmp"/>
972  </target>
973 
974  <!-- if we are using java 1.5+, we need the xalan.jar file in web/WEB-INF/lib,  but if we are using java 1.4, we can't have it there.
975       The test for whether we need it assumes we won't be trying to compile GS3 against Java versions less than 1.4. -->
976  <target name="configure-java-version" depends="init"
977    description="Activates or deactivates some jar libraries as needed depending on your java version">
978
979    <available property="have.xalan.jar" file="${web.lib}/xalan.jar"/>
980    <condition property="need.xalan.jar">
981      <or>
982        <not><equals arg1="1.4" arg2="${ant.java.version}"/></not>
983      </or>
984    </condition>
985
986    <!-- if they have xalan.jar but dont need it -->
987    <if>
988      <bool>
989        <and>
990          <isset property="have.xalan.jar"/>
991          <not><isset property="need.xalan.jar"/></not>
992        </and>
993      </bool>
994      <antcall target="deactivate-xalan-jar"/>
995    </if>
996
997    <!-- if they need xalan.jar but dont have it -->
998    <if>
999      <bool>
1000        <and>
1001          <not><isset property="have.xalan.jar"/></not>
1002          <isset property="need.xalan.jar"/>
1003        </and>
1004      </bool>
1005      <antcall target="activate-xalan-jar"/>
1006    </if>
1007
1008  </target>
1009 
1010  <target name="activate-xalan-jar">
1011    <echo>activating xalan.jar</echo>
1012    <copy file="${web.lib}/xalan.jar.tmp" tofile="${web.lib}/xalan.jar"/>
1013    <if>
1014      <bool>
1015    <and>
1016      <isset property="current.os.ismac"/>
1017      <available file="${catalina.home}/common/endorsed" type="dir"/>
1018    </and>
1019      </bool>
1020      <copy file="${web.lib}/xalan.jar.tmp" tofile="${catalina.home}/common/endorsed/xalan.jar"/>
1021    </if>
1022  </target>
1023
1024  <target name="deactivate-xalan-jar">
1025    <echo>deactivating xalan.jar</echo>
1026    <delete file="${web.lib}/xalan.jar"/>
1027    <!-- should we be deleting common/endorsed/xalan.jar on mac?? -->
1028  </target>
1029
1030
1031  <target name="prepare-collections" depends="init"
1032    description="Unpack all the collections from their svn zipped versions">
1033    <property name="collect.dir" value="${web.home}/sites/localsite/collect"/>
1034    <property name="index.zip" value="index.zip"/>
1035
1036    <echo message="installing collections..."/>
1037    <antcall target="gs2mgdemo-install"/>
1038    <antcall target="gs2mgppdemo-install"/>
1039    <antcall target="gberg-install"/>
1040    <antcall target="lucene-jdbm-demo-install"/>
1041  </target>
1042
1043  <target name="gs2mgdemo-prepare" if="collect.dir">
1044    <property name="gs2mgdemo.dir" value="${collect.dir}/gs2mgdemo"/>
1045
1046    <condition property="gs2mgdemo.present">
1047      <and>
1048        <available file="${gs2mgdemo.dir}/${index.zip}"/>
1049      </and>
1050    </condition>
1051  </target>
1052
1053  <target name="gs2mgdemo-install" if="gs2mgdemo.present" depends="gs2mgdemo-prepare">
1054    <unzip dest="${gs2mgdemo.dir}" src="${gs2mgdemo.dir}/${index.zip}" />
1055    <echo>collection gs2mgdemo installed</echo>
1056  </target>
1057
1058  <target name="gs2mgppdemo-prepare" if="collect.dir">
1059    <property name="gs2mgppdemo.dir" value="${collect.dir}/gs2mgppdemo"/>
1060 
1061    <condition property="gs2mgppdemo.present">
1062      <and>
1063        <available file="${gs2mgppdemo.dir}/${index.zip}"/>
1064      </and>
1065    </condition>
1066  </target>
1067
1068  <target name="gs2mgppdemo-install" if="gs2mgppdemo.present" depends="gs2mgppdemo-prepare">
1069    <unzip dest="${gs2mgppdemo.dir}" src="${gs2mgppdemo.dir}/${index.zip}" />
1070    <echo>collection gs2mgppdemo installed</echo>
1071  </target>   
1072
1073  <target name="gberg-prepare" if="collect.dir">
1074    <property name="gberg.dir" value="${collect.dir}/gberg"/>
1075    <available file="${gberg.dir}/index/${index.zip}" property="gberg.present"/>
1076  </target>
1077
1078  <target name="gberg-install" if="gberg.present" depends="gberg-prepare">
1079    <unzip dest="${gberg.dir}/index" src="${gberg.dir}/index/${index.zip}"/>
1080    <echo>collection gberg installed</echo>
1081  </target>
1082
1083  <target name="lucene-jdbm-demo-prepare" if="collect.dir">
1084    <property name="lucene-jdbm-demo.dir" value="${collect.dir}/lucene-jdbm-demo"/>
1085    <available file="${lucene-jdbm-demo.dir}/${index.zip}" property="lucene-jdbm-demo.present"/>
1086  </target>
1087
1088  <target name="lucene-jdbm-demo-install" if="lucene-jdbm-demo.present" depends="lucene-jdbm-demo-prepare">
1089    <unzip dest="${lucene-jdbm-demo.dir}" src="${lucene-jdbm-demo.dir}/${index.zip}"/>
1090    <echo>collection lucene-jdbm-demo installed</echo>
1091  </target>
1092
1093 
1094  <target name="install-solr-ext" depends="init" >
1095    <exec executable="ant.bat" osfamily="windows" dir="${solr-ext.home}" spawn="false">
1096      <arg value="add-service"/>
1097    </exec>
1098    <exec executable="ant" os="${os.unix}" dir="${solr-ext.home}" spawn="false">
1099      <arg value="add-service"/>
1100    </exec>
1101    <antcall target="solr-jdbm-demo-install"/>
1102  </target>
1103
1104  <target name="solr-jdbm-demo-prepare" if="collect.dir">
1105    <property name="solr-jdbm-demo.dir" value="${collect.dir}/solr-jdbm-demo"/>
1106    <available file="${solr-jdbm-demo.dir}/${index.zip}" property="solr-jdbm-demo.present"/>
1107  </target>
1108
1109  <target name="solr-jdbm-demo-install" if="solr-jdbm-demo.present" depends="solr-jdbm-demo-prepare">
1110    <unzip dest="${solr-jdbm-demo.dir}" src="${solr-jdbm-demo.dir}/${index.zip}"/>
1111    <echo>collection solr-jdbm-demo installed</echo>
1112  </target>
1113
1114  <!-- Until 64 bit Linux and Mac (Lion) machines can generate a working IsisGdl,
1115       use the ones generated on a 32 bit Linux and Mac (Leopard), respectively -->
1116  <target name="get-isisgdl" if="${current.os.isunix}">
1117    <exec executable="uname" dir="${basedir}" failonerror="false"
1118      outputproperty="uname.val">
1119      <arg value="-m"/>
1120    </exec>
1121   
1122    <if><bool><equals arg1="${uname.val}" arg2="x86_64"/></bool>
1123      <echo>Bitness: ${uname.val}</echo>
1124      <if><bool><contains string="${os.bin.dir}" substring="darwin" casesensitive="false"/></bool>
1125    <get src="http://www.greenstone.org/caveat-emptor/IsisGdl.macleopard"
1126             dest="${basedir}/gs2build/bin/${os.bin.dir}/IsisGdl"/>   
1127      </if>
1128      <if><bool><contains string="${os.bin.dir}" substring="linux" casesensitive="false"/></bool>
1129    <get src="http://www.greenstone.org/caveat-emptor/IsisGdl.bin32"
1130             dest="${basedir}/gs2build/bin/${os.bin.dir}/IsisGdl"/>
1131      </if>
1132      <chmod file="${basedir}/gs2build/bin/${os.bin.dir}/IsisGdl" perm="755"/>
1133    </if>
1134  </target>
1135
1136  <target name="set-perl-shebangs" depends="perl-for-building">
1137    <if>
1138      <bool>
1139        <and><isset property="perl.path"/>
1140          <not><equals arg1="${perl.path}" arg2=""/></not>
1141        </and>
1142      </bool>
1143
1144      <if><bool><istrue value="${current.os.iswindows}"/></bool>
1145    <property name="perl.exec" value="${perl.path}perl.exe"/>
1146    <else>
1147      <property name="perl.exec" value="${perl.path}perl"/>   
1148    </else>
1149      </if>
1150
1151      <!--<echo>**** PERLPATH: ${perl.path}</echo>-->
1152      <echo>Setting perl shebangs to Perl Exec: ${perl.exec}</echo>
1153
1154      <!-- set the shebangs in the cgi files to point to the correct perlpath -->
1155      <if>
1156    <bool><not><equals arg1="${web.home}" arg2="${web.writablehome}"></equals></not></bool>
1157    <mkdir dir="${web.writablehome}"/>
1158    <copy file="${web.home}/WEB-INF/cgi/gliserver.pl"       tofile="${web.writablehome}/WEB-INF/cgi/gliserver.pl"       overwrite="true"/>
1159    <copy file="${web.home}/WEB-INF/cgi/metadata-server.pl" tofile="${web.writablehome}/WEB-INF/cgi/metadata-server.pl" overwrite="true"/>
1160    <copy file="${web.home}/WEB-INF/cgi/checksum.pl"        tofile="${web.writablehome}/WEB-INF/cgi/checksum.pl"        overwrite="true"/>
1161      </if>
1162
1163      <rsr verbosity="1" file="${web.writablehome}/WEB-INF/cgi/gliserver.pl" pattern="^#!.*" replacement="#!${perl.exec} -w" lines="1"/>
1164      <rsr verbosity="1" file="${web.writablehome}/WEB-INF/cgi/metadata-server.pl" pattern="^#!.*" replacement="#!${perl.exec} -w" lines="1"/>
1165      <rsr verbosity="1" file="${web.writablehome}/WEB-INF/cgi/checksum.pl" pattern="^#!.*" replacement="#!${perl.exec} -w" lines="1"/>     
1166      <else>
1167    <echo>WARNING: perl.path is empty. Unable to set the shebangs in the perl files in ${web.writablehome}/WEB-INF/cgi</echo>
1168      </else>
1169    </if>
1170  </target>
1171
1172  <target name="configure-web" depends="init,perl-for-building"
1173    description="Configure only the web app config files">
1174    <!-- we want a unix path in the global.properties file -->
1175    <pathconvert targetos="unix" property="src.gsdl3.home.unix">
1176      <path path="${web.home}"/>
1177    </pathconvert>
1178    <pathconvert targetos="unix" property="src.gsdl3.writablehome.unix">
1179      <path path="${web.writablehome}"/>
1180    </pathconvert>
1181
1182    <antcall target="set-perl-shebangs" inheritAll="true" />
1183   
1184    <filter token="gsdlhome" value="${gs2build.home}"/>
1185    <filter token="gsdl3srchome" value="${basedir}"/>
1186    <filter token="gsdl3home" value="${src.gsdl3.home.unix}"/>
1187    <filter token="gsdl3writablehome" value="${src.gsdl3.writablehome.unix}"/>
1188    <filter token="gsdl3version" value="${app.version}"/>
1189    <filter token="tomcat.server" value="${tomcat.server}"/>
1190    <filter token="tomcat.port" value="${tomcat.port}"/>
1191    <filter token="perlpath" value="${escaped.perl.path}"/>
1192    <filter token="disable.collection.building" value="${disable.collection.building}"/>
1193    <copy file="${basedir}/resources/cgi/gsdl3site.cfg" tofile="${web.writablehome}/WEB-INF/cgi/gsdl3site.cfg" filtering="true" overwrite="true"/>
1194    <copy file="${basedir}/resources/web/global.properties" tofile="${web.writableclasses}/global.properties" filtering="true" overwrite="true"/>
1195    <copy file="${basedir}/resources/web/log4j.properties" tofile="${web.writableclasses}/log4j.properties" filtering="true" overwrite="true"/>
1196    <if><bool><istrue value="${gsdl3home.isreadonly}"/></bool>
1197      <!-- uncomment the writablehome properties -->
1198      <rsr verbosity="1" file="${web.writableclasses}/global.properties" pattern="^#gsdl3\.(writable{1})?home" replacement="gsdl3.$1home" />
1199    </if>
1200    <chmod file="${web.writableclasses}/global.properties" perm="644"/>
1201    <chmod file="${web.writableclasses}/log4j.properties" perm="644"/>
1202  </target>
1203
1204  <target name="compile-web" depends="init">
1205    <javac srcdir="${web.classes}"
1206      destdir="${web.classes}"
1207      includeantruntime="${compile.includeantruntime}"
1208      debug="${compile.debug}"
1209      deprecation="${compile.deprecation}"
1210      optimize="${compile.optimize}">
1211      <classpath><path refid="compile.classpath"/></classpath>
1212    </javac>
1213  </target>
1214
1215  <target name="compile-classpath-jars" depends="init">
1216    <if><bool><available file="admin/cp.mf"/></bool>
1217      <jar destfile="admin/cp.jar" manifest="admin/cp.mf"/>
1218    </if>
1219    <if><bool><available file="${lib.java}/cp.mf"/></bool>
1220      <jar destfile="${lib.java}/cp.jar" manifest="${lib.java}/cp.mf"/>
1221    </if>
1222    <if><bool><available file="${lib.jni}/cp.mf"/></bool>
1223      <jar destfile="${lib.jni}/cp.jar" manifest="${lib.jni}/cp.mf"/>
1224    </if>
1225    <if><bool><available file="${web.lib}/cp.mf"/></bool>
1226      <jar destfile="${web.lib}/cp.jar" manifest="${web.lib}/cp.mf"/>
1227    </if>
1228    <jar destfile="cp.jar">
1229      <manifest>
1230        <attribute name="Class-Path" value="server.jar admin/cp.jar lib/java/cp.jar lib/jni/cp.jar web/WEB-INF/lib/cp.jar"/>
1231      </manifest>
1232    </jar>
1233  </target>
1234
1235  <target name="clean-classpath-jars" depends="init">
1236    <delete file="admin/cp.jar"/>
1237    <delete file="${lib.java}/cp.jar"/>
1238    <delete file="${lib.jni}/cp.jar"/>
1239    <delete file="${web.lib}/cp.jar"/>
1240    <delete file="cp.jar"/>
1241  </target>
1242
1243
1244  <target name="svnupdate-web" unless="nosvn.mode">
1245    <exec executable="svn">
1246      <arg value="update"/>
1247      <arg value="${web.writablehome}"/>
1248      <arg value="-r"/><arg value="${branch.revision}"/>
1249    </exec>
1250  </target>
1251
1252  <target name="update-web" depends="init,svnupdate-web,configure-web"
1253    description="update only the web stuff (config files)"/>
1254
1255  <!-- ======================= Tomcat Targets ========================== -->
1256 
1257  <!-- this target downloads and installs Tomcat -->
1258  <!-- we download tomcat (version 7 for Java 1.5 and later, version 5 for Java 1.4 plus the 1.4 compatibility package). -->
1259  <target name="prepare-tomcat" depends="init,setup-proxy" if="tomcat.islocal"
1260    description="downloads the appropriate version of Tomcat (Tomcat 5 if using Java 1.4, Tomcat 7 if using Java 1.5 or higher). If you want to change which version of Java you are using between 1.4 and 1.5/7 then you need to run prepare-tomcat">
1261  <if>
1262      <bool>
1263        <not><available file="${packages.home}/tomcat/.flagfile"/></not>
1264      </bool>
1265
1266      <!-- check that packages dir is there -->
1267      <mkdir dir="${packages.home}"/>
1268      <get src="http://www.greenstone.org/gs3files/${tomcat.version}.zip"
1269        dest="${packages.home}/${tomcat.version}.zip"
1270        usetimestamp="true"/>
1271      <unzip src="${packages.home}/${tomcat.version}.zip"
1272        dest="${packages.home}"/>
1273     
1274      <!-- If we are using Java 1.4, we'd be using tomcat 5.5 in which case
1275      we would need to have the tomcat compat package to work with Java 1.4-->
1276      <if>
1277    <bool><equals arg1="1.4" arg2="${ant.java.version}"/></bool>
1278    <get src="http://www.greenstone.org/gs3files/${tomcat.version}-compat.zip"
1279      dest="${packages.home}/${tomcat.version}-compat.zip"
1280      usetimestamp="true"/>
1281    <unzip src="${packages.home}/${tomcat.version}-compat.zip"
1282      dest="${packages.home}"/>
1283      </if>
1284     
1285      <!-- delete any existing tomcat -->
1286      <delete dir="${packages.home}/tomcat"/>
1287      <move todir="${packages.home}/tomcat">
1288        <fileset dir="${packages.home}/${tomcat.version}"/>
1289      </move>
1290      <!--
1291      <copy file="${basedir}/resources/tomcat/setclasspath.bat"
1292        tofile="${packages.home}/tomcat/bin/setclasspath.bat"
1293        overwrite="true"/>
1294      <copy file="${basedir}/resources/tomcat/setclasspath.sh"
1295        tofile="${packages.home}/tomcat/bin/setclasspath.sh"
1296        overwrite="true"/>
1297      -->
1298      <!-- make sure we have execute permission for the .sh files -->
1299      <chmod dir="${packages.home}/tomcat/bin" perm="ugo+rx"
1300        includes="*.sh"/>   
1301
1302      <echo file="${packages.home}/tomcat/.flagfile">
1303        the timestamp of this file is the time that tomcat was extracted from the zip files.
1304        it is used to figure out whether the files need to be refreshed or not in `ant prepare-tomcat`
1305      </echo>
1306
1307      <!-- this is not strictly a prepare tomcat thing, but if one changes
1308      Java, then they need to change tomcat as well, so might as well call
1309      it here -->
1310      <antcall target="configure-java-version"/>
1311      <else>
1312        <echo>Tomcat has been prepared, will not prepare</echo>
1313        <echo>Delete ${packages.home}/tomcat/.flagfile to force refresh</echo>
1314      </else>
1315
1316    </if>
1317
1318  </target>
1319 
1320  <target name="configure-tomcat" depends="init,configure-tomcat-local,configure-tomcat-external"/>
1321 
1322  <target name="configure-tomcat-local" depends="init,perl-for-building" if="tomcat.islocal">
1323    <!-- re-setup the server.xml file -->
1324    <copy file="${basedir}/resources/tomcat/server_tomcat${tomcat.version.major}.xml"
1325        tofile="${packages.home}/tomcat/conf/server.xml" overwrite="true">
1326      <filterset>
1327        <filter token="port" value="${tomcat.port}"/>
1328        <filter token="shutdown-port" value="${tomcat.shutdown.port}"/>
1329      </filterset>
1330    </copy>
1331    <!-- set up the greenstone3 context, it may have a custom name specified in build.properties -->
1332    <if><bool><not><equals arg1="greenstone3" arg2="${custom.context}"></equals></not></bool>
1333        <copy file="${basedir}/resources/tomcat/greenstone3.xml" tofile="${basedir}/resources/tomcat/${custom.context}.xml" overwrite="true"/>
1334    </if>
1335    <copy file="${basedir}/resources/tomcat/${custom.context}.xml" tofile="${packages.home}/tomcat/conf/Catalina/localhost/${custom.context}.xml" overwrite="true">
1336      <filterset>
1337        <filter token="gsdl3webhome" value="${web.home}"/>
1338        <filter token="gsdl3webwritablehome" value="${web.writablehome}"/>
1339    <filter token="privilegedattribute" value ="${privileged.attribute}"/>
1340      </filterset>
1341    </copy>
1342    <if>
1343        <bool>
1344            <and>
1345                <available file="${packages.home}/tomcat/conf/Catalina/localhost/greenstone3.xml"/>
1346                <not><equals arg1="greenstone3" arg2="${custom.context}"></equals></not>
1347            </and>
1348        </bool>
1349        <delete file="${packages.home}/tomcat/conf/Catalina/localhost/greenstone3.xml"/>
1350    </if>
1351   
1352    <!-- set up the greenstone3 web.xml file -->
1353    <copy file="${basedir}/resources/tomcat/web.xml" tofile="${packages.home}/tomcat/conf/web.xml" overwrite="true">
1354      <filterset>
1355    <filter token="perlpath" value="${perl.path}"/>
1356      </filterset>
1357    </copy>
1358  </target>
1359 
1360  <target name="configure-tomcat-external" depends="init" unless="tomcat.islocal">
1361    <!-- re-setup the server.xml file -->
1362    <!-- need to edit the config file, or do we get the user to do this???-->
1363  </target>
1364
1365  <target name="configure-solr-ext" depends="init" >
1366    <!-- re-setup the web/ext/solr/solr.xml file -->
1367    <copy file="${web.home}/ext/solr/solr.xml.in"
1368      tofile="${gsdl3.writablehome}/ext/solr/solr.xml" filtering="true" overwrite="true">
1369      <filterset>
1370        <filter token="gsdl3.home" value="${src.gsdl3.home.unix}"/>
1371        <filter token="gsdl3.writablehome" value="${src.gsdl3.writablehome.unix}"/>
1372      </filterset>
1373    </copy>
1374  </target>
1375 
1376  <!-- This target runs tomcat's "bin/catalina.bat(.sh) jpda start"
1377       to allow debugging the running GS3 server in Eclipse. See the instructions at
1378       http://www.wikijava.org/wiki/Debugging_a_servlet_with_tomcat_and_Eclipse_tutorial
1379       on how to use this with eclipse
1380    -->
1381  <target name="debug-start-tomcat" description="Startup Tomcat for debugger" depends="init" if="tomcat.islocal">
1382    <property name="tomcat.classpath" refid="local.tomcat.classpath"/>
1383    <property name="tomcat.path" refid="local.tomcat.path"/>
1384
1385    <if><bool>
1386    <isset property="fedora.maxpermsize"/></bool>
1387      <property name="catalina.opts" value="-Djava.util.prefs.syncInterval=2000000 -DGSDL3HOME=$GSDL3HOME -DGSDLOS=$GSDLOS -DPATH=$PATH -Xmx400M ${fedora.maxpermsize}"/>
1388      <else>
1389    <property name="catalina.opts" value="-Djava.util.prefs.syncInterval=2000000 -DGSDL3HOME=$GSDL3HOME -DGSDLOS=$GSDLOS -DPATH=$PATH -Xmx400M"/>
1390      </else>
1391    </if>
1392
1393    <echo file="${catalina.home}/bin/setenv.bat">set CLASSPATH=${tomcat.classpath}</echo>
1394    <echo file="${catalina.home}/bin/setenv.sh">export CLASSPATH=${tomcat.classpath}</echo>
1395   
1396    <exec executable="${catalina.home}/bin/catalina.sh" os="${os.unix}" dir="${catalina.home}/bin" spawn="false">
1397      <arg value="jpda" />
1398      <arg value="start" />
1399      <env key="JPDA_ADDRESS" value="8000"/> <!-- for debugging Tomcat in Eclipse -->
1400      <env key="JPDA_TRANSPORT" value="dt_socket"/> <!-- for debugging Tomcat in Eclipse -->
1401      <!--<env key="GSDLOS" value="linux"/> do we need this?? -->
1402      <env key="PATH" path="${tomcat.path}"/>
1403      <env key="CATALINA_OPTS" value="${catalina.opts}"/>
1404      <env key="CATALINA_HOME" value="${catalina.home}"/>
1405      <env key="CLASSPATH" path="${tomcat.classpath}"/>
1406      <env key="LD_LIBRARY_PATH" path="${env.LD_LIBRARY_PATH}:${lib.jni}"/>
1407      <env key="DYLD_LIBRARY_PATH" path="${env.DYLD_LIBRARY_PATH}:${lib.jni}:${gdbm.home}/lib"/> <!-- for mac os --> <!-- need gdbm here these days ??-->
1408      <env key="WNHOME" path="${wn.home}"/>
1409      <env key="FEDORA_HOME" path="${fedora.home}"/>
1410    </exec>
1411    <exec executable="${catalina.home}/bin/catalina.bat" osfamily="windows" dir="${catalina.home}/bin" spawn="true">
1412      <arg value="jpda" />
1413      <arg value="start" />
1414      <env key="JPDA_ADDRESS" value="8000"/> <!-- for debugging Tomcat in Eclipse -->
1415      <env key="JPDA_TRANSPORT" value="dt_socket"/> <!-- for debugging Tomcat in Eclipse -->
1416      <env key="GSDLOS" value="windows"/>
1417      <env key="GSDL3HOME" value="${basedir}"/>
1418      <env key="Path" path="${tomcat.path}"/>
1419      <env key="PATH" path="${tomcat.path}"/>
1420      <env key="CATALINA_OPTS" value="${catalina.opts}"/>
1421      <env key="CATALINA_HOME" value="${catalina.home}"/>
1422      <env key="CLASSPATH" path="${tomcat.classpath}"/>
1423      <env key="FEDORA_HOME" path="${fedora.home}"/>
1424    </exec>
1425    <!-- wait for the server to startup in case other targets need it running -->
1426    <waitfor maxwait="5" maxwaitunit="second">
1427      <and>
1428        <socket server="${tomcat.server}" port="${tomcat.port}"/>
1429        <http url="http://${tomcat.server}:${tomcat.port}${app.path}/index.html"/>
1430      </and>
1431    </waitfor>
1432  </target> 
1433 
1434
1435  <!-- Another way: http://ptrthomas.wordpress.com/2006/03/25/how-to-start-and-stop-tomcat-from-ant/ -->
1436  <target name="start-tomcat" description="Startup only Tomcat" depends="init" if="tomcat.islocal">
1437    <property name="tomcat.classpath" refid="local.tomcat.classpath"/>
1438    <property name="tomcat.path" refid="local.tomcat.path"/>
1439
1440    <if><bool>
1441    <isset property="fedora.maxpermsize"/></bool>
1442      <property name="catalina.opts" value="-Djava.util.prefs.syncInterval=2000000 -DGSDL3HOME=$GSDL3HOME -DGSDLOS=$GSDLOS -DPATH=$PATH -Xmx400M ${fedora.maxpermsize}"/>
1443      <else>
1444    <property name="catalina.opts" value="-Djava.util.prefs.syncInterval=2000000 -DGSDL3HOME=$GSDL3HOME -DGSDLOS=$GSDLOS -DPATH=$PATH -Xmx400M"/>
1445      </else>
1446    </if>
1447
1448    <echo file="${catalina.home}/bin/setenv.bat">set CLASSPATH=${tomcat.classpath}</echo>
1449    <echo file="${catalina.home}/bin/setenv.sh">export CLASSPATH=${tomcat.classpath}</echo>
1450
1451    <!-- using osfamily instead of testing os against os.windows list of recognised windows versions
1452     so that future windows versions are included. See http://simonharrer.wordpress.com/tag/osfamily/
1453    Can't use the osfamily test for linux-type machines as a group since osfamily=unix is separate from osfamily=mac,
1454    see http://ant-contrib.sourceforge.net/tasks/tasks/osfamily.html -->
1455
1456    <exec executable="${catalina.home}/bin/startup.sh" os="${os.unix}" dir="${catalina.home}/bin" spawn="false">
1457      <!--<env key="GSDLOS" value="linux"/> do we need this?? -->
1458      <env key="GSDL3HOME" value="${basedir}"/>
1459      <env key="PATH" path="${tomcat.path}"/>
1460      <env key="CATALINA_OPTS" value="${catalina.opts}"/>
1461      <env key="CATALINA_HOME" value="${catalina.home}"/>
1462      <env key="CLASSPATH" path="${tomcat.classpath}"/>
1463      <env key="LD_LIBRARY_PATH" path="${env.LD_LIBRARY_PATH}:${lib.jni}"/>
1464      <env key="DYLD_LIBRARY_PATH" path="${env.DYLD_LIBRARY_PATH}:${lib.jni}:${gdbm.home}/lib"/> <!-- for mac os --> <!-- need gdbm here these days ??-->
1465      <env key="WNHOME" path="${wn.home}"/>
1466      <env key="FEDORA_HOME" path="${fedora.home}"/>
1467    </exec>
1468    <exec executable="${catalina.home}/bin/startup.bat" osfamily="windows" dir="${catalina.home}/bin" spawn="true">
1469      <env key="GSDLOS" value="windows"/>
1470      <env key="GSDL3HOME" value="${basedir}"/>
1471      <env key="Path" path="${tomcat.path}"/>
1472      <env key="PATH" path="${tomcat.path}"/>
1473      <env key="CATALINA_OPTS" value="${catalina.opts}"/>
1474      <env key="CATALINA_HOME" value="${catalina.home}"/>
1475      <env key="CLASSPATH" path="${tomcat.classpath}"/>
1476      <env key="FEDORA_HOME" path="${fedora.home}"/>
1477    </exec>
1478    <!-- wait for the server to startup in case other targets need it running -->
1479    <waitfor maxwait="5" maxwaitunit="second">
1480      <and>
1481        <socket server="${tomcat.server}" port="${tomcat.port}"/>
1482        <http url="http://${tomcat.server}:${tomcat.port}${app.path}/index.html"/>
1483      </and>
1484    </waitfor>
1485  </target>
1486
1487  <!--ant task http: http://www.jajakarta.org/ant/ant-1.6.1/docs/ja/manual/api/org/apache/tools/ant/taskdefs/condition/Http.html-->
1488  <target name="reconfigure" description="Reconfigure the message router">
1489    <waitfor maxwait="5" maxwaitunit="second">
1490      <http url="http://${tomcat.server}:${tomcat.port}${app.path}${server.default.servlet}?a=s&amp;sa=c"/>
1491    </waitfor>
1492  </target>
1493
1494  <!--Command-line args to Ant: http://www.jguru.com/faq/view.jsp?EID=471794-->
1495  <target name="reconfigure-collection" description="Reconfigure the collection">
1496    <waitfor maxwait="5" maxwaitunit="second">
1497      <http url="http://${tomcat.server}:${tomcat.port}${app.path}${server.default.servlet}?a=s&amp;sa=c&amp;sc=${collection}"/>
1498    </waitfor>
1499  </target>
1500
1501  <!-- windows: do we want to launch a webrowser?? -->
1502  <!-- shouldn't this test whether anything is running first?
1503       It's safer to always attempt to stop tomcat: that way we won't be dependent on the right time
1504       to check whether the server is stopped or still running before attempting to start again.
1505       This target, which was recently called force-stop-tomcat for a while but is back to being
1506       called stop-tomcat, now hides the Java exception output that appears whenever tomcat is already
1507       stopped as happens when stop-tomcat is called consecutively. -->
1508  <target name="force-stop-tomcat" description="Shutdown only Tomcat" depends="init" if="tomcat.islocal">
1509    <exec executable="${catalina.home}/bin/shutdown.sh" os="${os.unix}" dir="${catalina.home}/bin" spawn="false">
1510      <env key="FEDORA_HOME" path="${fedora.home}"/>
1511      <env key="CATALINA_HOME" value="${catalina.home}"/>
1512      <arg line=">/dev/null 2>&amp;1"/>
1513    </exec>
1514    <exec executable="${catalina.home}/bin/shutdown.bat" osfamily="windows" dir="${catalina.home}/bin" spawn="false">
1515      <env key="FEDORA_HOME" path="${fedora.home}"/>
1516      <env key="CATALINA_HOME" value="${catalina.home}"/>
1517      <arg line=">nul 2>&amp;1"/>
1518    </exec>   
1519  </target>
1520
1521  <!-- Can also try the "socket" condition in place of the "http" condition
1522       And also use a <waitfor> in place of <condition>, such as:
1523       <waitfor maxwait="5" maxwaitunit="second" timeoutproperty="tomcat.isstopped"><http url="..."/></waitfor>
1524       The http URL resolves to host:port/greenstone3
1525       Condition uses <http/> rather than <socket/> for testing, since if the server was stopped, the socket
1526       might still be in use for some moments. We test the URL with the http condition since it's likelier to
1527       fail sooner if the server has indeed been stopped. -->
1528  <target name="check-tomcat-running">
1529    <condition property="tomcat.isrunning">
1530      <!--<http url="http://${tomcat.server}:${tomcat.port}${app.path}"/>-->
1531      <http url="http://${tomcat.server}:${tomcat.port}"/>
1532    </condition>
1533  </target>
1534
1535  <!-- stop-tomcat checks if the tomcat server is already running. If it appears to be running
1536       (regardless of whether tomcat was just starting to shut down), this target calls force-stop-tomcat
1537       to issue the shutdown command to tomcat. Then it waits for at most 15 seconds for the server to
1538       actually stop by checking the socket at which tomcat listens every second, printing a warning
1539       at the end of the max wait time of 15 seconds if tomcat was still running. -->
1540  <target name="stop-tomcat" description="Shutdown only Tomcat if running" depends="check-tomcat-running" if="tomcat.isrunning">
1541     <antcall target="force-stop-tomcat"/>
1542
1543     <property name="wait.numchecks" value="15"/>
1544     <echo>Waiting for the server to shutdown... (${wait.numchecks} seconds max)</echo>
1545     <waitfor maxwait="${wait.numchecks}" maxwaitunit="second" checkevery="1" checkeveryunit="second" timeoutproperty="tomcat.timedout">
1546       <not><socket server="${tomcat.server}" port="${tomcat.port}"/></not>
1547     </waitfor>
1548     
1549     <if>
1550       <bool>
1551     <isset property="${tomcat.timedout}"/>
1552       </bool>
1553       <property name="tomcat.isrunning" value="true"/>
1554       <echo>WARNING: Checked the socket ${wait.numchecks} times, but port ${tomcat.port} is still busy.</echo>
1555       <else>
1556     <echo>Tomcat is stopped.</echo>
1557     <property name="tomcat.isrunning" value="false"/>
1558       </else>
1559     </if>
1560  </target>
1561
1562  <target name="restart-tomcat" description="Shutdown and restart only Tomcat" depends="init,stop-tomcat,start-tomcat"/>
1563
1564  <target name="setup-catalina-ant-tasks">
1565    <!-- Configure the custom Ant tasks for the Tomcat Manager application -->
1566    <taskdef name="deploy"    classname="org.apache.catalina.ant.DeployTask"
1567      classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
1568    <taskdef name="list"      classname="org.apache.catalina.ant.ListTask"
1569      classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
1570    <taskdef name="reload"    classname="org.apache.catalina.ant.ReloadTask"
1571      classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
1572    <taskdef name="resources" classname="org.apache.catalina.ant.ResourcesTask"
1573      classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
1574    <taskdef name="roles"     classname="org.apache.catalina.ant.RolesTask"
1575      classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
1576    <taskdef name="start"     classname="org.apache.catalina.ant.StartTask"
1577      classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
1578    <taskdef name="stop"      classname="org.apache.catalina.ant.StopTask"
1579      classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
1580    <taskdef name="undeploy"  classname="org.apache.catalina.ant.UndeployTask"
1581      classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
1582  </target>
1583
1584  <!-- http://blog.andrewbeacock.com/2007/11/how-to-truncate-log-file-using-ubuntu.html
1585    Doing "cat </dev/null > packages/tomcat/logs/catalina.out" doesn't work as an ant target.
1586    It seems to have a problem with cat or </dev/null, with or without the < sign. -->
1587  <target name="reset-logs" description="Empties catalina.out, greenstone.log and contents of web/logs/tmp">
1588    <echo>Truncating catalina.out, greenstone.log and server.log, and emptying ${web.writablehome}/logs/tmp</echo>   
1589    <exec executable="rm" os="${os.unix}" dir="${catalina.home}/logs" spawn="false">
1590      <arg value="-f"/>
1591      <arg value="catalina.out"/>
1592    </exec>
1593    <exec executable="rm" os="${os.unix}" dir="${web.writablehome}/logs" spawn="false">
1594      <arg value="-f"/>
1595      <arg value="greenstone.log"/>
1596    </exec>
1597    <exec executable="rm" os="${os.unix}" dir="${web.writablehome}/logs" spawn="false">
1598      <arg value="-f"/>
1599      <arg value="server.log"/>
1600    </exec>
1601
1602    <exec executable="touch" os="${os.unix}" dir="${catalina.home}/logs"
1603    spawn="false">
1604      <arg value="catalina.out"/>
1605    </exec>
1606    <exec executable="touch" os="${os.unix}" dir="${web.writablehome}/logs"
1607      spawn="false">
1608      <arg value="greenstone.log"/>
1609    </exec>
1610    <exec executable="touch" os="${os.unix}" dir="${web.writablehome}/logs"
1611      spawn="false">
1612      <arg value="server.log"/>
1613    </exec>
1614
1615    <exec executable="cmd" osfamily="windows" dir="${catalina.home}/logs" spawn="false">
1616      <arg line="/c echo. > catalina.out"/>
1617    </exec>
1618    <exec executable="cmd" osfamily="windows" dir="${web.writablehome}/logs" spawn="false">
1619      <arg line="/c echo. > greenstone.log"/>
1620    </exec>
1621    <exec executable="cmd" osfamily="windows" dir="${web.writablehome}/logs" spawn="false">
1622      <arg line="/c echo. > server.log"/>
1623    </exec>
1624
1625    <if>
1626      <bool><available file="${web.writablehome}/logs/tmp" type="dir"/></bool>
1627      <delete>
1628    <fileset dir="${web.writablehome}/logs/tmp" includes="**/*"/>
1629      </delete>
1630    </if>
1631  </target>
1632
1633  <!-- ======================= ant Targets ============================ -->
1634  <target name="prepare-ant" depends="init">
1635    <if>
1636      <bool>
1637        <not><available file="${packages.home}/ant/.flagfile"/></not>
1638      </bool>
1639
1640      <get src="http://www.greenstone.org/gs3files/apache-ant-1.7.0-bin.zip"
1641        dest="${packages.home}/apache-ant-1.7.0-bin.zip"
1642        usetimestamp="true"/>
1643      <unzip src="${packages.home}/apache-ant-1.7.0-bin.zip"
1644        dest="${packages.home}"/>
1645      <move todir="${packages.home}/ant">
1646        <fileset dir="${packages.home}/apache-ant-1.7.0"/>
1647      </move>
1648      <echo file="${packages.home}/ant/.flagfile">
1649        the timestamp of this file is the time that ant was extracted from the zip files.
1650        it is used to figure out whether the files need to be refreshed or not in `ant prepare-ant`
1651      </echo>
1652
1653      <else>
1654        <echo>Ant has been prepared, will not prepare</echo>
1655        <echo>Delete ${packages.home}/ant/.flagfile to force refresh</echo>
1656      </else>
1657
1658    </if>
1659  </target>
1660
1661  <!-- ======================= Admin Targets ============================ --> 
1662
1663  <!-- This target won't work with Eclipse because the SecureInputHandler used below conflicts with it.
1664    See http://www.dcepler.net/post.cfm/hiding-password-input-in-ant
1665    But you can do: echo mypassword | ant config-admin -->
1666  <target name="config-admin" description="Reset admin password">
1667    <input addproperty="admin.password" defaultvalue="admin" message="New admin password (3-8 characters):&gt;">
1668      <handler classname="org.apache.tools.ant.input.SecureInputHandler" /> <!-- password won't be visible on screen -->
1669    </input>
1670    <!--<echo>PWD: ${admin.password}</echo>-->
1671    <antcall target="update-userdb">
1672      <param name="user.username" value="admin"/>
1673      <param name="user.password" value="${admin.password}"/>
1674      <param name="user.groups" value=""/>
1675      <param name="user.status" value=""/>
1676      <param name="user.comment" value="Password updated."/>
1677      <param name="user.email" value=""/>
1678    </antcall>
1679  </target>
1680
1681  <target name="config-user" description="Add or modify users" depends="get-user-data,update-userdb"/>
1682
1683  <target name="get-user-data" description="Get user details">
1684    <input addproperty="user.username" message="Username:&gt;"/>
1685    <input addproperty="user.password" defaultvalue="" message="Password (3-8 characters):&gt;">
1686      <handler classname="org.apache.tools.ant.input.SecureInputHandler" /> <!-- password won't be visible on screen -->
1687    </input>
1688    <input addproperty="user.groups" defaultvalue="" message="Groups (comma-separated list):&gt;"/>
1689    <input addproperty="user.status" defaultvalue="true" message="Enabled (true/false):&gt;"/>
1690    <input addproperty="user.comment" defaultvalue="" message="Comment:&gt;"/>
1691    <input addproperty="user.email" defaultvalue="" message="Email:&gt;"/>
1692  </target>
1693
1694<!-- This target won't work with Eclipse because the SecureInputHandler used below conflicts with it.
1695    See http://www.dcepler.net/post.cfm/hiding-password-input-in-ant
1696    But you can do: echo mypassword | ant config-admin -->
1697  <target name="update-userdb" description="Add or modify users" depends="check-tomcat-running">
1698
1699    <!-- stop tomcat if running, since derby db is embedded and only allows connections from one jvm instance at a time
1700     See http://db.apache.org/derby/papers/DerbyTut/embedded_intro.html
1701     The ${tomcat.isrunning} property is set by the depends-target "check-tomcat-running" -->
1702    <if>
1703      <bool>
1704    <istrue value="${tomcat.isrunning}"/>
1705      </bool>
1706      <antcall target="stop-tomcat"/>
1707    </if>
1708
1709    <!--<echo>${admin.password}</echo>--> <!-- for testing -->
1710    <java classname="org.greenstone.gsdl3.util.ModifyUsersDB">
1711      <classpath refid="compile.classpath"/> <!--for ${web.lib}/gsdl3.jar and supporting files-->
1712      <arg file="${web.home}/etc/usersDB"/>
1713      <arg value="${user.username}"/>
1714      <arg value="password=${user.password}"/>
1715      <arg value="groups=${user.groups}"/>
1716      <arg value="status=${user.status}"/>
1717      <arg value="comment=${user.comment}"/>
1718      <arg value="email=${user.email}"/>
1719    </java>
1720   
1721    <!-- run tomcat again if it used to be running -->
1722    <if>
1723      <bool>
1724    <istrue value="${tomcat.isrunning}"/>
1725    </bool>
1726      <antcall target="start-tomcat"/>
1727    </if>
1728  </target>
1729
1730
1731  <!-- ======================= Axis Targets ============================ --> 
1732 
1733  <target name="prepare-axis" depends="init">
1734
1735    <if>
1736      <bool>
1737        <not><available file="${packages.home}/axis/.flagfile"/></not>
1738      </bool>
1739
1740      <get src="http://www.greenstone.org/gs3files/${axis.zip.version}"
1741        dest="${packages.home}/${axis.zip.version}"
1742        usetimestamp="true"/>
1743      <unzip src="${packages.home}/${axis.zip.version}"
1744        dest="${packages.home}"/>
1745      <move todir="${packages.home}/axis">
1746        <fileset dir="${packages.home}/${axis.dir.version}"/>
1747      </move>
1748      <!-- install axis into greenstone web app -->
1749      <copy todir="${web.lib}">
1750        <fileset dir="${packages.home}/axis/webapps/axis/WEB-INF/lib">
1751          <include name="*.jar"/>
1752        </fileset>
1753      </copy>
1754      <copy todir="${web.home}">
1755        <fileset dir="${packages.home}/axis/webapps/axis/">
1756          <include name="*.jsp"/>
1757          <include name="*.jws"/>
1758        </fileset>
1759      </copy>
1760      <copy tofile="${web.home}/axis.html" file="${packages.home}/axis/webapps/axis/index.html"/>
1761      <copy todir="${web.classes}">
1762        <fileset dir="${packages.home}/axis/webapps/axis/WEB-INF/classes">
1763          <include name="*.properties"/>
1764        </fileset>
1765      </copy>
1766      <echo file="${packages.home}/axis/.flagfile">
1767        the timestamp of this file is the time that axis was extracted from the zip files.
1768        it is used to figure out whether the files need to be refreshed or not in `ant prepare-axis`
1769      </echo>
1770
1771      <else>
1772        <echo>Axis has been prepared, will not prepare</echo>
1773        <echo>Delete ${packages.home}/axis/.flagfile to force refresh</echo>
1774      </else>
1775
1776    </if>
1777  </target>
1778
1779  <target name="soap-deploy-site" depends="init,get-sitename,get-siteuri,get-webservices,create-deployment-files,deploy-site"
1780    description="Deploy a SOAP web service for a local Greenstone site. Tomcat must be running for this to work."/>
1781   
1782    <target name="deploy-site">
1783    <java classname="org.apache.axis.client.AdminClient">
1784      <classpath refid="compile.classpath"/>
1785      <arg value="-l"/>
1786      <arg value="http://${tomcat.server}:${tomcat.port}${app.path}/servlet/AxisServlet"/>
1787      <arg file="${basedir}/resources/soap/deploy.wsdd"/>
1788    </java>
1789    <delete file="${basedir}/resources/soap/deploy.wsdd"/> <!--clean up, no longer used-->
1790  </target>
1791 
1792  <target name="soap-undeploy-site" depends="get-undeploy-service-name"
1793    description="Undeploy a SOAP web service for a local Greenstone site. Tomcat must be running for this to work.">
1794    <filter token="servicesname" value="${axis.undeploy.servicename}"/>
1795    <copy file="${basedir}/resources/soap/undeploy-site.wsdd.template"
1796      tofile="${basedir}/resources/soap/undeploy.wsdd"
1797      filtering="true"
1798      overwrite="true"/>
1799    <java classname="org.apache.axis.client.AdminClient">
1800      <classpath refid="compile.classpath"/>
1801      <arg value="-l"/>
1802      <arg value="http://${tomcat.server}:${tomcat.port}${app.path}/servlet/AxisServlet"/>
1803      <arg file="${basedir}/resources/soap/undeploy.wsdd"/>
1804    </java>
1805    <delete file="${basedir}/resources/soap/undeploy.wsdd"/> <!--clean up, no longer used-->
1806  </target> 
1807
1808  <!-- this target used to deploy the default web service SOAPServer (base.webservice.name) on the localsite server
1809  with the default servicename of localsite-->
1810  <target name="deploy-localsite" depends="init"
1811    description="Deploy the SOAP server for localsite. Will start and stop Tomcat.">
1812    <antcall target="start-tomcat"/>
1813    <echo>Deploying ${base.webservice.name} web services for localsite under service name: localsite</echo>
1814    <antcall target="create-deployment-files">
1815      <param name="axis.sitename" value="localsite"/>
1816      <param name="axis.servicesname" value="${base.webservice.name}"/>
1817      <param name="axis.siteuri" value="localsite"/>
1818    </antcall>
1819    <antcall target="deploy-site">
1820      <param name="axis.sitename" value="localsite"/>
1821      <param name="axis.servicesname" value="${base.webservice.name}"/>
1822      <param name="axis.siteuri" value="localsite"/>
1823    </antcall>
1824    <echo>The Greenstone server has been started up. If you do not want it running, please type: ant stop.</echo>
1825  </target>
1826   
1827  <target name="get-sitename" unless="axis.sitename">
1828    <input addproperty="axis.sitename" defaultvalue="localsite">What site do you want to deploy services for?
1829Press Enter for default:localsite</input>
1830  </target>
1831
1832  <target name="get-undeploy-service-name" unless="axis.undeploy.servicename">
1833    <input addproperty="axis.undeploy.servicename" defaultvalue="localsite">Please enter the full name of the service you wish to undeploy.
1834To find out which web services you've got deployed, point your browser to http://HOST:PORT/greenstone3/services
1835Or press Enter for undeploying the default:localsite /&gt;</input>
1836     <echo>Name of service to undeploy: ${axis.undeploy.servicename}</echo>
1837  </target>
1838
1839  <target name="get-webservices" unless="axis.servicesname">
1840    <input addproperty="axis.servicesname" defaultvalue="${base.webservice.name}">Which set of web services do you want to deploy?
1841Choose from: ${web.services.list}
1842Or press Enter for default:${base.webservice.name} /&gt;</input>
1843    <echo>${axis.servicesname}</echo>
1844  </target>
1845
1846  <target name="get-siteuri" depends="get-sitename,get-webservices" unless="axis.siteuri">
1847    <input addproperty="axis.siteuri" defaultvalue="${axis.servicesname}${axis.sitename}">What name do you want the service to have? (Press Enter for default:${axis.servicesname}${axis.sitename})</input>
1848    <echo>Site: ${axis.sitename}, services: ${axis.servicesname}, servicesname: ${axis.siteuri}</echo>
1849  </target>
1850
1851  <target name="set-soapmethod" description="Determines whether the service in the wsdd should have the style attribute set to message or the provider attribute set to java:RPC"  if="axis.servicesname">
1852   <condition property="soap.method" value="provider='java:MSG' style='message' use='literal'">
1853      <equals arg1="${axis.servicesname}" arg2="${base.webservice.name}"/>
1854    </condition>
1855   
1856   <!--everything else defaults to java:RPC at present-->
1857   <condition property="soap.method" value="provider='java:RPC'">
1858     <not>
1859      <equals arg1="${axis.servicesname}" arg2="${base.webservice.name}"/>
1860    </not>
1861    </condition>
1862  </target>
1863   
1864  <target name="create-deployment-files" depends="set-soapmethod" if="axis.sitename">
1865    <filter token="sitename" value="${axis.sitename}"/>
1866    <filter token="siteuri" value="${axis.siteuri}"/>
1867    <filter token="servicesname" value="${axis.servicesname}"/>
1868    <filter token="soapmethod" value="${soap.method}"/>
1869    <copy file="${basedir}/resources/soap/site.wsdd.template"
1870      tofile="${basedir}/resources/soap/deploy.wsdd"
1871      filtering="true"
1872      overwrite="true"/>
1873    <!-- create the java files and compile them -->
1874    <copy file="${basedir}/resources/java/${axis.servicesname}.java.in"
1875      tofile="${src.gsdl3.home}/${axis.servicesname}${axis.sitename}.java"
1876      filtering="true"
1877      overwrite="true"/>
1878    <mkdir dir="${build.home}"/>
1879    <javac srcdir="${src.home}"
1880      destdir="${build.home}"
1881      includeantruntime="${compile.includeantruntime}"
1882      debug="${compile.debug}"
1883      deprecation="${compile.deprecation}"
1884      optimize="${compile.optimize}">
1885      <classpath refid="compile.classpath"/>
1886      <include name="org/greenstone/gsdl3/${axis.servicesname}${axis.sitename}.java" />
1887    </javac>
1888    <mkdir dir="${web.classes}/org/greenstone/gsdl3"/>
1889    <copy file="${build.home}/org/greenstone/gsdl3/${axis.servicesname}${axis.sitename}.class"
1890      tofile="${web.classes}/org/greenstone/gsdl3/${axis.servicesname}${axis.sitename}.class"
1891      overwrite="true" />
1892  </target>
1893 
1894
1895  <!-- ====================== Core targets ============================== -->
1896  <!-- core targets refer to the core gsdl3 java src -->
1897 
1898  <target name="prepare-core"/>
1899 
1900  <target name="configure-core"/>
1901
1902  <target name="update-core" depends="init,svnupdate-core,clean-core,compile-core"
1903    description="Update only the Greenstone core" />
1904 
1905  <target name="svnupdate-core" unless="nosvn.mode">
1906    <exec executable="svn">
1907      <arg value="update"/>
1908      <arg value="${basedir}"/>
1909      <arg value="-r"/><arg value="${branch.revision}"/>
1910    </exec>
1911  </target>
1912
1913  <target name="clean-core"
1914    description="Clean only the Greenstone core">
1915    <!-- should this delete the gsdl3.jar from web/WEB-INF?? -->
1916    <delete dir="${build.home}"/>
1917  </target>
1918
1919  <target name="compile-core" depends="init"
1920    description="Compile only the Greenstone core">
1921    <mkdir dir="${build.home}"/>
1922   
1923    <if><bool><isset property="with.jni"/></bool>
1924    <javac srcdir="${src.home}"
1925           destdir="${build.home}"
1926           includeantruntime="${compile.includeantruntime}"
1927           debug="${compile.debug}"
1928           deprecation="${compile.deprecation}"
1929           optimize="${compile.optimize}">
1930      <classpath>
1931            <path refid="compile.classpath"/>
1932      </classpath>
1933    </javac>
1934    <else>
1935      <property name="gsprefix" value=""/>   
1936      <javac srcdir="${src.home}"
1937         destdir="${build.home}"
1938         includeantruntime="${compile.includeantruntime}"
1939         debug="${compile.debug}"
1940         deprecation="${compile.deprecation}"
1941         optimize="${compile.optimize}">
1942        <classpath>
1943              <path refid="compile.classpath"/>
1944        </classpath>
1945        <exclude name="org/greenstone/gsdl3/service/GS2MGPPRetrieve.java"/>
1946        <exclude name="org/greenstone/gsdl3/service/GS2MGPPSearch.java"/>
1947        <exclude name="org/greenstone/gsdl3/service/GS2MGSearch.java"/>
1948        <exclude name="org/greenstone/gsdl3/service/GS2MGRetrieve.java"/>
1949        <exclude name="org/greenstone/gsdl3/service/GoogleNgramMGPPSearch.java"/>
1950        <exclude name="org/greenstone/gsdl3/service/PhindPhraseBrowse.java"/>
1951        <exclude name="org/greenstone/gsdl3/util/GDBMWrapper.java"/>
1952      </javac>
1953    </else>
1954    </if>
1955    <jar destfile="${build.home}/gsdl3.jar">
1956      <fileset dir="${build.home}">
1957        <include name="org/greenstone/gsdl3/**"/>
1958        <include name="org/flax/**"/>
1959        <exclude name="**/Test.class"/>
1960      </fileset>
1961      <manifest>
1962        <attribute name="Built-By" value="${user.name}" />
1963      </manifest>
1964    </jar>
1965    <copy file="${build.home}/gsdl3.jar" todir="${web.lib}"/>
1966
1967    <jar destfile="${build.home}/gutil.jar">
1968      <fileset dir="${build.home}">
1969        <include name="org/greenstone/util/**"/>
1970      </fileset>
1971      <manifest>
1972        <attribute name="Built-By" value="${user.name}" />
1973      </manifest>
1974    </jar>
1975    <copy file="${build.home}/gutil.jar" todir="${web.lib}"/>
1976
1977    <!-- copy the localsite server in case we need it -->
1978    <copy file="${build.home}/org/greenstone/gsdl3/${base.webservice.name}localsite.class" tofile="${web.classes}/org/greenstone/gsdl3/${base.webservice.name}localsite.class" />
1979
1980    <!-- Greenstone Administrator Interface -->
1981    <jar destfile="${build.home}/GAI.jar">
1982      <fileset dir="${build.home}">
1983        <include name="org/greenstone/admin/**"/>
1984      </fileset>
1985      <manifest>
1986        <attribute name="Built-By" value="${user.name}" />
1987      </manifest>
1988    </jar>
1989    <copy file="${build.home}/GAI.jar" todir="${web.lib}"/>
1990    <copy file="${build.home}/GAI.jar" todir="${admin.dir}"/>
1991    <jar destfile="${build.home}/phind.jar">
1992      <fileset dir="${build.home}">
1993        <include name="org/greenstone/applet/phind/**"/>
1994      </fileset>
1995      <manifest>
1996        <attribute name="Built-By" value="${user.name}" />
1997      </manifest>
1998    </jar>
1999    <mkdir dir="${web.applet}"/>
2000    <copy file="${build.home}/phind.jar" todir="${web.applet}"/>
2001    <!-- phind also needs xercesImpl.jar and xml-apis.jar to be in web/applet -->
2002    <if>
2003      <bool><istrue value="${tomcat.islocal}"/></bool>
2004      <copy file="${web.lib}/xercesImpl.jar" todir="${web.applet}"/>
2005      <copy file="${web.lib}/xml-apis.jar" todir="${web.applet}"/>
2006    </if>
2007
2008
2009    <!-- skip anttasks for now
2010    <jar destfile="${build.home}/anttasks.jar">
2011      <fileset dir="${build.home}">
2012        <include name="org/greenstone/anttasks/**"/>
2013      </fileset>
2014      <manifest>
2015        <attribute name="Built-By" value="${user.name}" />
2016      </manifest>
2017    </jar>
2018    <copy file="${build.home}/anttasks.jar" todir="${basedir}/lib/java"/>-->
2019    <jar destfile="${build.home}/gsdl3test.jar">
2020      <fileset dir="${build.home}">
2021        <include name="org/greenstone/gsdl3/**/*Test.class"/>
2022        <include name="org/greenstone/testing/**"/>
2023      </fileset>
2024      <manifest>
2025        <attribute name="Built-By" value="${user.name}" />
2026      </manifest>
2027    </jar>
2028    <jar destfile="${build.home}/server.jar">
2029      <fileset dir="${build.home}">
2030        <include name="org/greenstone/server/**"/>
2031        <include name="org/greenstone/util/**"/>
2032      </fileset>
2033      <fileset file="${basedir}/resources/java/server.properties"/>
2034      <manifest>
2035        <attribute name="Built-By" value="${user.name}"/>
2036      </manifest>
2037    </jar>
2038    <copy file="${build.home}/server.jar" todir="${basedir}"/>
2039  </target>
2040
2041  <!-- === Eclipse targets == -->
2042  <target name="setup-for-eclipse">
2043
2044    <filter token="gsdlhome" value="${gs2build.home}"/>
2045    <filter token="gsdl3srchome" value="${basedir}"/>
2046    <filter token="gsdl3home" value="${basedir}/web"/>
2047
2048    <if>
2049      <bool><not><available file="${basedir}/TransformingLibrary.launch"/></not></bool>         
2050      <copy file="${basedir}/TransformingLibrary.launch.in" tofile="${basedir}/TransformingLibrary.launch" filtering="true" overwrite="true"/>
2051    </if>
2052<!--
2053    <if>
2054      <bool><not><available file="${basedir}/LibraryCommandline.launch"/></not></bool>         
2055      <copy file="${basedir}/LibraryCommandline.launch.in" tofile="${basedir}/LibraryCommandline.launch" filtering="true" overwrite="true"/>
2056    </if>
2057-->
2058  </target>
2059 
2060  <!-- ================== Packages targets ================================ -->
2061  <!-- these targets refer to the greenstone source packages - these need
2062  updating less often, so are in  separate targets to the core -->
2063  <target name="prepare-packages" depends="init"/>
2064 
2065  <target name="update-packages" depends="init,svnupdate-packages,configure-packages,clean-packages,compile-packages"
2066    description="Update only the source packages"/>
2067
2068  <target name="svnupdate-packages" unless="nosvn.mode">
2069    <exec executable="svn">
2070      <arg value="update"/>
2071      <arg value="${src.packages.home}"/>
2072      <arg value="-r"/><arg value="${branch.revision}"/>
2073    </exec>
2074  </target>
2075
2076 
2077  <target name="configure-packages" depends="init,configure-javagdbm"
2078    description="Configure only the packages."/>
2079 
2080  <target name="configure-javagdbm" if="with.jni">
2081    <echo>
2082      Configuring JavaGDBM
2083    </echo>
2084   
2085    <exec executable="${javagdbm.home}/configure" os="${os.unix}" dir="${javagdbm.home}" failonerror="true">
2086      <arg value="--prefix=${basedir}"/>
2087      <arg value="--libdir=${lib.jni}"/>
2088      <arg value="--with-gdbm=${gdbm.home}"/>
2089      <arg line="${cross.configure.args}"/>
2090    </exec>   
2091  </target>
2092
2093  <target name="clean-packages" depends="init,clean-javagdbm" description="Clean only the packages"/>
2094
2095  <target name="clean-javagdbm" depends="init">
2096    <if><bool><available file="${javagdbm.home}/Makefile"/></bool>
2097    <exec executable="make" os="${os.unix}"
2098      dir="${javagdbm.home}" failonerror="true">
2099      <arg value="clean"/>
2100    </exec>
2101    </if>
2102  </target>
2103 
2104  <target name="distclean-packages" depends="init,distclean-javagdbm" description="Distclean only the packages"/>
2105
2106  <target name="distclean-javagdbm" depends="init">
2107    <if><bool><available file="${javagdbm.home}/Makefile"/></bool>
2108    <exec executable="make" os="${os.unix}"
2109      dir="${javagdbm.home}" failonerror="true">
2110      <arg value="distclean"/>
2111    </exec>
2112    </if>
2113  </target>
2114 
2115  <target name="compile-packages" description="Compile only the source packages">
2116    <!-- javagdbm -->
2117    <antcall target="compile-javagdbm"/>
2118    <!-- Search4j -->
2119    <antcall target="compile-search4j"/>
2120  </target>
2121
2122  <target name="compile-javagdbm" description="Compile JavaGDBM" if="with.jni">
2123   
2124    <!-- unix: -->
2125    <echo>compile javagdbm</echo>
2126    <exec executable="make" os="${os.unix}" dir="${javagdbm.home}" failonerror="true"/>
2127    <exec executable="make" os="${os.unix}" dir="${javagdbm.home}" failonerror="true">
2128      <arg value="install"/>
2129    </exec>
2130
2131    <!-- windows: Calling without the "compile" argument first will run winMake.bat with
2132         "all" which will then perform both the compile AND link targets in jni/win32.mak
2133         (thereby also generating gdbmjava.dll). Then we run the same command with
2134         the "install" argument to copy the gdbmjava.dll into the correct location. -->
2135    <echo>Windows: compile javagdbm</echo>
2136    <exec executable="${javagdbm.home}/winMake.bat" osfamily="windows" dir="${javagdbm.home}" failonerror="true">     
2137      <env key="GSDL3SRCHOME" path="${basedir}"/>
2138    </exec>
2139    <exec executable="${javagdbm.home}/winMake.bat" osfamily="windows" dir="${javagdbm.home}" failonerror="true">
2140      <env key="GSDL3SRCHOME" path="${basedir}"/>
2141      <arg value="install"/>
2142    </exec>
2143
2144    <!-- install the jar file -->
2145    <echo>Install the javagdbm jar file ${javagdbm.home}/javagdbm.jar ${lib.jni}</echo>
2146    <copy file="${javagdbm.home}/javagdbm.jar" todir="${lib.jni}"/>
2147  </target>
2148
2149  <target name="compile-search4j">
2150
2151    <!-- windows -->
2152    <if><bool><istrue value="${current.os.iswindows}"/></bool>
2153      <exec executable="nmake" dir="${src.packages.home}/search4j" failonerror="true">
2154        <arg value="/f"/>
2155        <arg value="win32.mak"/>
2156        <arg value='BINDIR="${basedir}\bin"'/>
2157      </exec>
2158      <exec executable="nmake" dir="${src.packages.home}/search4j" failonerror="true">
2159        <arg value="/f"/>
2160        <arg value="win32.mak"/>
2161        <arg value="install"/>
2162        <arg value='BINDIR="${basedir}\bin"'/>
2163      </exec>
2164
2165    <!-- unix -->
2166    <else><if><bool><istrue value="${current.os.isunix}"/></bool>
2167      <exec executable="${src.packages.home}/search4j/configure" dir="${src.packages.home}/search4j" failonerror="true">
2168        <arg value="--bindir=${basedir}/bin"/>
2169        <arg value="${static.arg}"/>
2170        <arg line="${cross.configure.args}"/>
2171      </exec>
2172      <exec executable="make" dir="${src.packages.home}/search4j" failonerror="true"/>
2173      <exec executable="make" dir="${src.packages.home}/search4j" failonerror="true">
2174        <arg value="install"/>
2175      </exec>
2176
2177    <!-- else warn -->
2178    <else>
2179      <fail>this target does not support the current os</fail>
2180
2181    </else></if></else></if>
2182
2183  </target>
2184
2185  <target name="install-auxiliary-jar-files" depends="init">
2186
2187    <if>
2188      <bool><available file="${mg.home}/mg.jar"/></bool>
2189      <copy file="${mg.home}/mg.jar" todir="${lib.jni}"/>
2190    </if>
2191
2192    <if>
2193      <bool><available file="${mgpp.home}/mgpp.jar"/></bool>
2194      <copy file="${mgpp.home}/mgpp.jar" todir="${lib.jni}"/>
2195    </if>
2196
2197    <copy file="${lucene.home}/LuceneWrapper3.jar" todir="${web.lib}"/>   
2198  </target>
2199 
2200  <target name="install-jni-files" depends="init" if="with.jni">
2201    <antcall target="install-jni-files-linux"/>
2202    <antcall target="install-jni-files-windows"/>
2203    <antcall target="install-jni-files-macos"/>
2204  </target>
2205
2206  <target name="install-jni-files-linux" depends="init" if="current.os.isunixnotmac">
2207
2208    <if>
2209
2210      <bool><equals arg1="${os.bin.dir}" arg2="windows"/></bool>
2211      <!-- cross compiling to windows -->
2212      <copy file="${mg.home}/jni/mgretrievejni.dll" todir="${lib.jni}"/>
2213      <copy file="${mg.home}/jni/mgsearchjni.dll" todir="${lib.jni}"/>
2214      <copy file="${mg.home}/jni/mgpassjni.dll" todir="${lib.jni}"/>
2215      <copy file="${mgpp.home}/jni/mgppretrievejni.dll" todir="${lib.jni}"/>
2216      <copy file="${mgpp.home}/jni/mgppsearchjni.dll" todir="${lib.jni}"/>
2217      <copy file="${mgpp.home}/jni/mgpppassjni.dll" todir="${lib.jni}"/>
2218     
2219      <else>
2220    <!-- otherwise do the usual Unix copies -->
2221    <copy file="${mg.home}/jni/libmgretrievejni.so" todir="${lib.jni}"/>
2222    <copy file="${mg.home}/jni/libmgsearchjni.so" todir="${lib.jni}"/>
2223    <copy file="${mg.home}/jni/libmgpassjni.so" todir="${lib.jni}"/>
2224    <copy file="${mgpp.home}/jni/libmgppretrievejni.so" todir="${lib.jni}"/>
2225    <copy file="${mgpp.home}/jni/libmgppsearchjni.so" todir="${lib.jni}"/>
2226    <copy file="${mgpp.home}/jni/libmgpppassjni.so" todir="${lib.jni}"/>
2227      </else>
2228    </if>
2229
2230
2231  </target>
2232  <target name="install-jni-files-windows" depends="init" if="current.os.iswindows">
2233    <copy file="${mg.home}/jni/mgretrievejni.dll" todir="${lib.jni}"/>
2234    <copy file="${mg.home}/jni/mgsearchjni.dll" todir="${lib.jni}"/>
2235    <copy file="${mg.home}/jni/mgpassjni.dll" todir="${lib.jni}"/>
2236    <copy file="${mgpp.home}/jni/mgppretrievejni.dll" todir="${lib.jni}"/>
2237    <copy file="${mgpp.home}/jni/mgppsearchjni.dll" todir="${lib.jni}"/>
2238    <copy file="${mgpp.home}/jni/mgpppassjni.dll" todir="${lib.jni}"/>
2239  </target>
2240  <target name="install-jni-files-macos" depends="init" if="current.os.ismac">
2241    <copy file="${mg.home}/jni/libmgretrievejni.jnilib" todir="${lib.jni}"/>
2242    <copy file="${mg.home}/jni/libmgsearchjni.jnilib" todir="${lib.jni}"/>
2243    <copy file="${mg.home}/jni/libmgpassjni.jnilib" todir="${lib.jni}"/>
2244    <copy file="${mgpp.home}/jni/libmgppretrievejni.jnilib" todir="${lib.jni}"/>
2245    <copy file="${mgpp.home}/jni/libmgppsearchjni.jnilib" todir="${lib.jni}"/>
2246    <copy file="${mgpp.home}/jni/libmgpppassjni.jnilib" todir="${lib.jni}"/>
2247  </target>
2248 
2249  <!-- ========common-src targets =================================-->
2250  <!-- these are used to get common-src (for indexers, gdbm, sqlite etc) when
2251  collection building is not enabled -->
2252
2253  <target name="update-common-src" depends="init" if="collection.building.disabled">
2254  </target>
2255
2256  <target name="svnupdate-common-src" depends="init" if="collection.building.disabled" unless="nosvn.mode">
2257    <exec executable="svn">
2258      <arg value="update"/>
2259      <arg value="${common.src.home}"/>
2260      <arg value="-r"/><arg value="${branch.revision}"/>
2261    </exec>
2262  </target>
2263
2264  <target name="prepare-common-src" depends="init" if="collection.building.disabled" unless="common.src.present">
2265    <antcall target="checkout-common-src"/>
2266    <antcall target="unzip-windows-packages"/>
2267  </target>
2268
2269  <target name="checkout-common-src" depends="init" if="collection.building.disabled" unless="nosvn.mode">
2270    <echo>checking out common-src</echo>
2271    <exec executable="svn">
2272      <arg value="checkout"/>
2273      <arg value="${svn.root}/main/${branch.path}/greenstone2/common-src"/>
2274            <arg value="common-src"/>
2275      <arg value="-r"/><arg value="${branch.revision}"/>
2276    </exec>
2277  </target>
2278   
2279  <target name="configure-common-src" depends="init">
2280<!--
2281    <echo>cross configure args: ${cross.configure.args}</echo>
2282-->
2283    <exec executable="${common.src.home}/configure" os="${os.unix}"
2284      dir="${common.src.home}" failonerror="true">
2285      <arg value="--prefix=${gs2build.home}"/> <!-- what value to use?? -->
2286      <arg value="--bindir=${gs2build.home}/bin/${os.bin.dir}"/> <!-- what value to use?? -->
2287      <arg line="${gs2.opt.args}"/>
2288      <arg line="${static.arg}"/>
2289      <arg line="${cross.configure.args}"/>
2290      <arg line="${allargs}"/>
2291    </exec>
2292  </target>
2293
2294  <target name="clean-common-src" depends="init">
2295    <!-- unix:  -->
2296    <if><bool><available file="${common.src.home}/Makefile"/></bool>
2297    <exec executable="make" os="${os.unix}" dir="${common.src.home}" failonerror="true">
2298      <arg value="clean"/>
2299    </exec>
2300    </if>
2301    <!-- windows: -->   
2302    <exec executable="nmake" dir="${common.src.home}" osfamily="windows" failonerror="true">
2303      <arg value="/f"/>
2304      <arg value="win32.mak"/>
2305      <arg value="clean"/>
2306      <arg value="GSDLHOME=${gs2build.home}"/>
2307    </exec>
2308  </target>
2309  <target name="distclean-common-src" depends="init">
2310    <!-- unix:  -->
2311    <if><bool><available file="${common.src.home}/Makefile"/></bool>
2312    <exec executable="make" os="${os.unix}" dir="${common.src.home}" failonerror="true">
2313      <arg value="distclean"/>
2314    </exec>
2315    </if>
2316    <!-- windows: distclean = clean + remove configure products (remove makefiles). But on Windows there is no removing makefiles, so we just call clean -->   
2317    <exec executable="nmake" dir="${common.src.home}" osfamily="windows" failonerror="true">
2318      <arg value="/f"/>
2319      <arg value="win32.mak"/>
2320      <arg value="clean"/>
2321      <arg value="GSDLHOME=${gs2build.home}"/>
2322    </exec>
2323  </target>
2324  <target name="compile-common-src" depends="init">
2325    <!-- unix: -->
2326    <exec executable="make" os="${os.unix}" dir="${common.src.home}" failonerror="true">
2327      <arg value="${gs2.compile.target}"/>
2328    </exec>
2329    <!-- windows: -->
2330    <exec executable="nmake" dir="${common.src.home}" osfamily="windows" failonerror="true">
2331      <arg value="/f"/>
2332      <arg value="win32.mak"/>
2333      <arg value="GSDLHOME=${gs2build.home}"/>
2334      <arg value="ENABLE_JNI=${gs2.windows.enablejni}"/>
2335      <arg value="ENABLE_MG=${gs2.windows.enablemg}"/>
2336      <arg value="ENABLE_MGPP=${gs2.windows.enablemgpp}"/>
2337      <arg value="USE_GDBM=${gs2.windows.usegdbm}"/>
2338      <arg value="USE_SQLITE=${gs2.windows.usesqlite}"/>
2339    </exec>
2340  </target>
2341 
2342  <!-- ======= collection-building targets ===========================-->
2343
2344  <target name="update-collection-building" if="collection.building.enabled"
2345    depends="init,svnupdate-collection-building,gs2build-edit-setup-bat,configure-common-src,clean-common-src,compile-common-src,configure-collection-building,clean-collection-building,compile-collection-building"
2346    description="Update (SVN update, configure, compile etc) only the collection building components"/>
2347
2348  <target name="svnupdate-collection-building" if="collection.building.enabled" depends="init,svnupdate-gs2build,svnupdate-cgi,svnupdate-gli" unless="nosvn.mode"
2349    description="SVN update the collection building components">
2350  </target>
2351
2352  <target name="prepare-collection-building" depends="init,prepare-gs2build,svnupdate-cgi,prepare-gli" if="collection.building.enabled">
2353  </target>
2354
2355  <target name="configure-collection-building" depends="init,configure-build-src" if="collection.building.enabled"
2356    description="Configure the collection building components">
2357  </target>
2358
2359  <target name="clean-collection-building" depends="init,clean-gli,clean-build-src"
2360    description="Clean only the collection building components"
2361    if="collection.building.enabled"/>
2362
2363  <target name="distclean-collection-building" depends="init,clean-build-src,distclean-build-src"
2364    description="Distclean only the collection building components"
2365    if="collection.building.enabled"/>
2366
2367  <target name="compile-collection-building" depends="init,compile-build-src,compile-gli" if="collection.building.enabled"
2368    description="Compile only the collection building components">
2369    <!-- make install for common-src -->
2370    <!-- unix: -->
2371    <exec executable="make" os="${os.unix}" dir="${common.src.home}" failonerror="true">
2372      <arg value="${gs2.install.target}"/>
2373    </exec>
2374     
2375    <!-- windows: -->
2376    <exec executable="nmake" dir="${common.src.home}" osfamily="windows" failonerror="true">
2377      <arg value="/f"/>
2378      <arg value="win32.mak"/>
2379      <arg value="install"/>
2380      <arg value="GSDLHOME=${gs2build.home}"/>
2381      <arg value="ENABLE_JNI=${gs2.windows.enablejni}"/>
2382      <arg value="ENABLE_MG=${gs2.windows.enablemg}"/>
2383      <arg value="ENABLE_MGPP=${gs2.windows.enablemgpp}"/>
2384      <arg value="USE_GDBM=${gs2.windows.usegdbm}"/>
2385      <arg value="USE_SQLITE=${gs2.windows.usesqlite}"/>
2386      <!--
2387      <arg value="ENABLE_JNI=${gs2.windows.enablejni}"/>
2388      <arg value="USE_SQLITE=0"/>--> <!-- why is this not on by default? -->
2389    </exec>
2390
2391    <!-- install gs2build indexers for windows -->
2392      <if>
2393    <bool><istrue value="${current.os.iswindows}"/></bool>
2394    <copy todir="${gs2build.home}/bin/windows">
2395      <fileset dir="${gs2build.home}/common-src/indexers/bin">
2396        <include name="*.*"/>
2397      </fileset>
2398    </copy>
2399      </if>
2400
2401    <!-- LuceneWrapper jar file not installed by default -->
2402    <mkdir dir="${gs2build.home}/bin/java"/>
2403    <copy file="${lucene.home}/LuceneWrapper3.jar" todir="${gs2build.home}/bin/java"/>
2404
2405  </target>
2406
2407  <!-- ============== gli targets ================================= -->
2408 
2409  <!-- gliserver.pl, gsdlCGI.pm, metadata-server.pl and checksum.pl are updated alongside
2410       this in target svnupdate-collection-building -->
2411  <target name="svnupdate-gli" if="collection.building.enabled" depends="init" unless="nosvn.mode">
2412
2413    <exec executable="svn">
2414      <arg value="update"/>
2415      <arg value="${gli.home}"/>
2416      <arg value="-r"/><arg value="${branch.revision}"/>
2417    </exec>
2418
2419  </target>
2420
2421  <!-- gliserver.pl, gsdlCGI.pm, metadata-server.pl and checksum.pl are updated
2422       alongside this prepare-gli target in target prepare-collection-building -->
2423  <target name="prepare-gli" depends="init" if="collection.building.enabled" unless="gli.present">
2424    <!-- checkout -->
2425    <if><bool><and><not><istrue value="${nosvn.mode}"/></not><isset property="with.gli.and.gems"/></and></bool>
2426
2427    <exec executable="svn">
2428      <arg value="checkout"/>
2429      <arg value="${svn.root}/main/${branch.path}/gli"/>
2430      <arg value="-r"/><arg value="${branch.revision}"/>
2431    </exec>
2432
2433    </if>
2434  </target>
2435
2436  <!-- svn checkout gliserver.pl, gsdlCGI.pm for gli applet, as well as gsdlCGI.pm-dependent metadata-server.pl
2437       (checksum.pl is used by GS2 for depositdspace.dm and may eventually be used by GS3 too) -->
2438  <target name="svnupdate-cgi">
2439
2440    <exec executable="svn" dir="web/WEB-INF/cgi">
2441      <arg value="export"/>
2442      <arg value="-r"/><arg value="${branch.revision}"/>
2443      <arg value="${svn.root}/main/${branch.path}/greenstone2/common-src/cgi-bin/gliserver.pl"/>
2444    </exec>
2445    <exec executable="svn" dir="web/WEB-INF/cgi">
2446      <arg value="export"/>
2447      <arg value="-r"/><arg value="${branch.revision}"/>
2448      <arg value="${svn.root}/main/${branch.path}/greenstone2/common-src/cgi-bin/gsdlCGI.pm"/>
2449    </exec>
2450    <exec executable="svn" dir="web/WEB-INF/cgi">
2451      <arg value="export"/>
2452      <arg value="-r"/><arg value="${branch.revision}"/>
2453      <arg value="${svn.root}/main/${branch.path}/greenstone2/common-src/cgi-bin/metadata-server.pl"/>
2454    </exec>
2455    <exec executable="svn" dir="web/WEB-INF/cgi">
2456      <arg value="export"/>
2457      <arg value="-r"/><arg value="${branch.revision}"/>
2458      <arg value="${svn.root}/main/${branch.path}/greenstone2/common-src/cgi-bin/checksum.pl"/>
2459    </exec>
2460  </target>
2461
2462 
2463  <target name="clean-gli" depends="init" if="collection.building.enabled">
2464    <!-- gli -->
2465    <property name="gli.home" value="${basedir}/gli"/>
2466    <!-- linux -->
2467    <exec executable="clean.sh" os="${os.unix}" dir="${gli.home}"
2468      resolveExecutable="true" failonerror="true"/>
2469    <!-- windows -->
2470    <exec executable="clean.bat" osfamily="windows" dir="${gli.home}"
2471      resolveExecutable="true" failonerror="true"/>
2472  </target>
2473 
2474  <target name="compile-gli" depends="init" if="collection.building.enabled">
2475    <if><bool><isset property="with.gli.and.gems"/></bool>
2476      <!-- gli -->
2477      <property name="gli.home" value="${basedir}/gli"/>
2478
2479      <!-- linux -->
2480      <exec executable="makegli.sh" os="${os.unix}" dir="${gli.home}" resolveExecutable="true" failonerror="true"/>
2481      <!--remote gli-->
2482      <exec executable="makejar.sh" os="${os.unix}" dir="${gli.home}"
2483        resolveExecutable="true" failonerror="true"/>
2484      <!-- windows -->
2485      <exec executable="makegli.bat" osfamily="windows" dir="${gli.home}" resolveExecutable="true" failonerror="true"/>
2486      <!--remote gli-->
2487      <exec executable="makejar.bat" osfamily="windows" dir="${gli.home}"
2488        resolveExecutable="true" failonerror="true"/>
2489      <copy file="${gli.home}/GLIServer.jar" todir="${gs2build.home}/bin/java" />
2490    </if>
2491  </target>
2492
2493  <target name="gli" description="Run the Greenstone Librarian Interface" depends="init" if="collection.building.enabled">
2494    <exec executable="${basedir}/gli/gli.sh" os="${os.linux},${os.solaris}" dir="${basedir}/gli" spawn="true">
2495      <env key="gsdl3path" path="${basedir}"/>
2496      <env key="gsdlpath" path="${gs2build.home}"/>
2497    </exec>
2498    <exec executable="${basedir}/gli/gli.sh" os="${os.mac}" dir="${basedir}/gli" spawn="true">
2499      <env key="gsdl3path" path="${basedir}"/>
2500      <env key="gsdlpath" path="${gs2build.home}"/>
2501      <env key="DYLD_LIBRARY_PATH" path="${env.DYLD_LIBRARY_PATH}:${gdbm.home}/lib"/>
2502    </exec>
2503    <exec executable="${basedir}/gli/gli.bat" osfamily="windows" dir="${basedir}/gli" spawn="true">
2504      <env key="GSDL3PATH" path="${basedir}"/>
2505      <env key="GSDLPATH" path="${gs2build.home}"/>
2506    </exec>
2507    <echo>Running GLI from Ant means that you don't get to see any of the terminal output. If you have problems with GLI and want to see the output, please run the script gli.sh/bat from the greenstone3/gli directory.
2508    </echo>
2509  </target>
2510
2511  <!-- ================ gs2build targets =========================== -->
2512
2513  <target name="svnupdate-gs2build" if="collection.building.enabled" depends="init" unless="nosvn.mode">
2514    <echo>svn updating gs2build</echo>
2515    <exec executable="svn">
2516      <arg value="update"/>
2517      <arg value="${gs2build.home}"/>
2518      <arg value="-r"/><arg value="${branch.revision}"/>
2519    </exec>
2520  </target>
2521   
2522  <target name="prepare-gs2build" depends="init" if="collection.building.enabled" unless="gs2build.present">
2523    <antcall target="checkout-gs2build"/>
2524    <antcall target="prepare-pdfbox"/>
2525    <antcall target="prepare-imagemagick"/> <!-- has to be done before calling prepare-gnome-lib -->
2526    <antcall target="prepare-gnome-lib"/>
2527    <antcall target="unzip-windows-packages"/>
2528    <antcall target="checkout-winbin"/>
2529    <antcall target="get-windows-binaries"/>
2530    <antcall target="delete-winbin"/>
2531  </target>
2532
2533  <target name="checkout-gs2build" depends="init" if="collection.building.enabled" unless="nosvn.mode">
2534    <echo>checking out gs2build</echo>
2535    <exec executable="svn">
2536      <arg value="checkout"/>
2537      <arg value="${svn.root}/main/${branch.path}/gs2build"/>
2538      <arg value="-r"/><arg value="${branch.revision}"/>
2539    </exec>
2540  </target>
2541
2542  <!-- Gets the PDFBox extension into gs2build/ext if checkout.pdfbox.ext is set to true in build.properties
2543       (which it is by default) -->
2544  <target name="prepare-pdfbox" depends="init" if="collection.building.enabled">
2545    <if>
2546      <bool>
2547    <istrue value="${checkout.pdfbox.ext}"/>
2548      </bool>
2549     
2550      <property name="pdfbox.ext.dir" value="${gs2build.home}/ext/pdf-box"/>
2551      <condition property="pdfbox.ext.present">
2552    <available file="${pdfbox.ext.dir}" type="dir" />
2553      </condition>
2554     
2555      <!-- get the pdfbox tar.gz file if we don't already have it and extract it if there's no pdf-box directory in gs2build/ext-->
2556      <if>
2557    <bool>
2558      <not><istrue value="${pdfbox.ext.present}"/></not>
2559    </bool>
2560
2561    <if>
2562      <bool>
2563        <not><istrue value="${gs2build.home}/ext/pdf-box-java.tar.gz"/></not>
2564      </bool>
2565
2566      <echo>Checking out the PDFBox extension into the GSDLHOME extension area</echo>
2567      <exec executable="svn">
2568        <arg value="export"/>
2569        <arg value="${svn.root}/gs2-extensions/pdf-box/trunk/pdf-box-java.tar.gz"/>
2570        <arg value="${gs2build.home}/ext/pdf-box-java.tar.gz"/>
2571      </exec>
2572    </if>   
2573
2574    <echo>Extacting the PDFBox extension into the GSDLHOME extension area</echo>
2575    <untar compression="gzip"
2576           src="${gs2build.home}/ext/pdf-box-java.tar.gz"
2577           dest="${gs2build.home}/ext"/>
2578
2579    <delete file="${gs2build.home}/ext/pdf-box-java.tar.gz"/>
2580
2581    <else>
2582      <echo>The PDFBox extension already exists at ${pdfbox.ext.dir}</echo>
2583    </else>
2584      </if>
2585
2586      <else>
2587    <echo>**** Not preparing the PDFBox extension:</echo>
2588    <echo>The property checkout.pdfbox.ext in build.properties was not set or was set to false</echo>
2589      </else>
2590    </if>
2591  </target>
2592
2593  <target name="prepare-imagemagick" depends="init" if="collection.building.enabled">
2594    <if>
2595      <bool>
2596    <istrue value="${checkout.imagemagick.ext}"/>
2597      </bool>
2598
2599      <antcall target="checkout-imagemagick"/>
2600      <!--Compilation of imagemagick now happens during ant install, still before configuring the src code, as before -->
2601
2602      <else>
2603    <echo>**** Not preparing imagemagick:</echo>
2604    <echo>property checkout.imagemagick.ext in build.properties was not set or was set to false</echo>
2605      </else>
2606    </if>
2607  </target>
2608
2609  <target name="checkout-imagemagick" depends="init" if="collection.building.enabled" unless="nosvn.mode">
2610   
2611    <property name="imagemagick.src.dir" value="${gs2build.home}/ext/imagemagick"/>
2612    <condition property="imagemagick.src.present">
2613      <available file="${imagemagick.src.dir}" type="dir" />
2614    </condition>
2615
2616    <if>
2617      <bool>
2618    <not><istrue value="${imagemagick.src.present}"/></not>
2619      </bool>
2620     
2621      <echo>checking out imagemagick source into the extension area</echo>
2622
2623      <exec executable="svn">
2624    <arg value="checkout"/>
2625    <arg value="${svn.root}/gs2-extensions/imagemagick/trunk/src"/>
2626    <arg value="${imagemagick.src.dir}"/>
2627      </exec>
2628
2629      <else>
2630    <echo>imagemagick source code already exists at ${imagemagick.src.dir}</echo>
2631      </else>
2632    </if>
2633  </target>
2634
2635 <!-- Compile up imagemagick src folder if: the checkout.imagemagick.ext flag is turned on, if the imagick source code exists and if hasn't already been compiled up, then compile it up. Later can check if a gs-specific binary version has been installed already, in which case compilation won't be necessary. -->
2636  <target name="compile-imagemagick" if="checkout.imagemagick.ext">
2637   
2638    <property name="imagemagick.src.dir" value="${gs2build.home}/ext/imagemagick"/>
2639    <property name="imagemagick.compiled.dir" value="${gs2build.home}/ext/imagemagick/${os.bin.dir}"/>
2640
2641    <condition property="imagemagick.src.present.firstcheck">
2642      <available file="${imagemagick.src.dir}" type="dir" />
2643    </condition>
2644    <condition property="imagemagick.compiled.present">
2645      <available file="${imagemagick.compiled.dir}" type="dir"/>
2646    </condition>
2647    <!--<condition property="imagemagick.bin.present">
2648      <available file="${basedir}/wherever/the/imgmagick/binary/is/to/be/found" type="dir" />
2649    </condition>-->
2650
2651    <!-- imagemagick will only be checked out if the user set the checkout.imagemagick.ext in build.properties -->
2652    <if>
2653      <bool>
2654    <isfalse value="${imagemagick.src.present.firstcheck}"/>
2655      </bool>
2656      <antcall target="checkout-imagemagick"/>
2657    </if>
2658
2659    <!-- keep track of whether the imagemagick src is now indeed present. Need to know this for a subsequent test -->
2660    <condition property="imagemagick.src.present">
2661      <available file="${imagemagick.src.dir}" type="dir" />
2662    </condition>
2663
2664    <if>
2665      <bool>
2666    <and>
2667      <istrue value="${imagemagick.src.present}"/> <!-- imagemagick src code is present -->
2668      <isfalse value="${imagemagick.compiled.present}"/> <!-- imagemagick src not compiled yet, so no imagemagick/os subfolder yet -->
2669    </and>
2670      </bool>
2671      <!-- then compile it. Only necessary for mac/linux, since windows has a stable working binary of imagemagick -->
2672      <exec executable="/bin/bash" dir="${imagemagick.src.dir}" failonerror="true">
2673        <arg value="CASCADE-MAKE.sh"/>
2674      </exec> 
2675    </if>
2676  </target>
2677
2678
2679  <!-- Compile up gnome-lib src folder if: checkout.gnomelib.ext is turned on, and if not using the binary
2680       version (gnome-lib-minimal), and if the gnome-lib src folder is not already compiled up. -->
2681  <target name="compile-gnome-lib" if="checkout.gnomelib.ext">
2682
2683    <!-- http://stackoverflow.com/questions/3290307/sourcing-a-shell-profile-in-an-ant-build-file
2684     TODO: CASCADE-MAKE already sources devel.bash, but we still want to source it more globally,
2685     so that the rest of the GS3 compilation process also has access to those env variables -->
2686   
2687    <property name="gnome.lib.src.dir" value="${basedir}/gs2build/ext/gnome-lib"/>
2688    <property name="gnome.lib.compiled.dir" value="${basedir}/gs2build/ext/gnome-lib/${os.bin.dir}"/>
2689
2690    <condition property="gnome.src.lib.present.firstcheck" value="true" else="false">
2691      <available file="${gnome.lib.src.dir}" type="dir" />
2692    </condition>
2693    <condition property="gnome.compiled.lib.present" value="true" else="false">
2694      <available file="${gnome.lib.compiled.dir}" type="dir"/>
2695    </condition>
2696    <condition property="gnome.lib.min.present" value="true" else="false">
2697      <available file="${basedir}/gs2build/ext/gnome-lib-minimal" type="dir" />
2698    </condition>
2699
2700    <!-- Make sure to checkout gnome-lib if it was not checked out at this stage
2701     since we're instructed to do so in th pre-condition to this target -->
2702    <if>
2703      <bool>
2704    <and>
2705      <isfalse value="${gnome.lib.min.present}"/>
2706      <isfalse value="${gnome.src.lib.present.firstcheck}"/>
2707    </and>
2708      </bool>
2709      <antcall target="checkout-gnome-lib"/>
2710    </if>
2711
2712    <!-- Keep track of whether we have the gnome-lib src folder now. Need to know this for a subsequent test -->
2713    <condition property="gnome.src.lib.present" value="true" else="false">
2714      <available file="${gnome.lib.src.dir}" type="dir" />
2715    </condition>
2716
2717    <!--<echo>MIN: ${gnome.lib.min.present}
2718      SRC LIB: ${gnome.src.lib.present}
2719      COMPILED: ${gnome.compiled.lib.present}</echo>-->
2720
2721    <if>
2722      <bool>
2723    <and>
2724      <isfalse value="${gnome.lib.min.present}"/> <!-- no gnome-lib-minimal binary present -->
2725      <istrue value="${gnome.src.lib.present}"/> <!-- gnome-lib folder for compilation is present-->
2726      <isfalse value="${gnome.compiled.lib.present}"/> <!-- gnome-lib not yet compiled, so no gnome-lib/os subfolder yet -->
2727    </and>
2728      </bool>
2729
2730      <!-- then compile it. Only necessary for mac/linux, since windows doesn't need gnome lib -->
2731      <exec executable="/bin/bash" dir="${gnome.lib.src.dir}" failonerror="true">
2732        <arg value="CASCADE-MAKE.sh"/>
2733      </exec> 
2734    </if>
2735  </target>
2736
2737
2738  <target name="prepare-gnome-lib" depends="init" if="collection.building.enabled" unless="gnome-lib.present">
2739    <if>
2740      <bool>
2741    <istrue value="${checkout.gnomelib.ext}"/>
2742      </bool>
2743
2744      <antcall target="checkout-gnome-lib"/>
2745      <!--Compilation of gnome-lib happens during ant install, just before configuring (common-src and) build-src-->
2746
2747      <else>
2748    <echo>**** Not preparing gnome-lib:</echo>
2749    <echo>property checkout.gnomelib.ext in build.properties was not set or was set to false</echo>
2750      </else>
2751    </if>
2752  </target>
2753
2754
2755  <target name="checkout-gnome-lib" depends="init" if="collection.building.enabled" unless="nosvn.mode">
2756
2757    <property name="gnomelib.src.dir" value="${basedir}/gs2build/ext/gnome-lib"/>
2758    <condition property="gnome.src.present">
2759      <available file="${gnomelib.src.dir}" type="dir" />
2760    </condition>
2761
2762    <if>
2763      <bool>
2764    <not><istrue value="${gnome.src.present}"/></not>
2765      </bool>
2766
2767      <echo>checking out gnome-lib extension</echo>
2768      <exec executable="svn">
2769    <arg value="checkout"/>
2770    <arg value="${svn.root}/gs2-extensions/gnome-lib/trunk/src"/>
2771    <arg value="${gs2build.home}/ext/gnome-lib"/>
2772      </exec>
2773
2774      <else>
2775    <echo>gnomelib source code already exists at ${gnomelib.src.dir}</echo>
2776      </else>
2777    </if>
2778
2779  </target>
2780
2781  <target name="checkout-winbin" depends="init" if="current.os.iswindows"
2782    unless="nosvn.mode">
2783
2784    <exec executable="svn">
2785      <arg value="checkout"/>
2786      <arg value="${svn.root}/main/${branch.path}/binaries/windows"/>
2787      <arg value="-r"/><arg value="${branch.revision}"/>
2788      <arg value="winbin"/>
2789    </exec>
2790
2791  </target>
2792
2793  <target name="update-winbin" depends="init" if="current.os.iswindows" unless="nosvn.mode">
2794    <exec executable="svn">
2795      <arg value="update"/>
2796      <arg value="winbin"/>
2797      <arg value="-r"/><arg value="${branch.revision}"/>
2798    </exec>
2799
2800  </target>
2801 
2802  <target name="get-windows-binaries" depends="init" if="collection.building.enabled.windows">
2803    <move todir="${gs2build.home}/bin/windows" failonerror="false">
2804      <fileset dir="${basedir}/winbin/bin"/>
2805    </move>
2806  </target>
2807
2808  <target name="delete-winbin" depends="init" if="collection.building.enabled.windows">
2809    <delete dir="${basedir}/winbin"/>
2810  </target>
2811 
2812  <target name="unzip-windows-packages" depends="init" if="current.os.iswindows"> 
2813    <unzip src="${common.src.home}/packages/windows/crypt/crypt.zip"
2814      dest="${common.src.home}/packages/windows/crypt"/>
2815    <untar compression="gzip"
2816      src="${common.src.home}/packages/sqlite/${sqlite.targz.version}"
2817      dest="${common.src.home}/packages/sqlite"/>
2818    <unzip src="${common.src.home}/indexers/packages/windows/iconv/iconv.zip"
2819      dest="${common.src.home}/indexers/packages/windows/iconv"/>
2820  </target>
2821   
2822  <target name="gs2build-edit-setup-bat" if="collection.building.enabled.windows">
2823    <!-- we want a windows path in the setup.bat file -->
2824    <pathconvert targetos="windows" property="gs2build.home.windows">
2825      <path path="${gs2build.home}"/>
2826    </pathconvert>
2827    <move file="${gs2build.home}/setup.bat" tofile="${gs2build.home}/setup-tmp.bat">
2828      <filterset>
2829        <filter token="gsdlhome" value="${gs2build.home.windows}"/>
2830      </filterset>
2831    </move> 
2832    <move file="${gs2build.home}/setup-tmp.bat" tofile="${gs2build.home}/setup.bat" />
2833  </target>
2834 
2835 
2836  <target name="clean-build-src" depends="init" if="collection.building.enabled">
2837    <!-- unix:  -->
2838    <if><bool><available file="${build.src.home}/Makefile"/></bool>
2839    <exec executable="make" os="${os.unix}" dir="${build.src.home}" failonerror="true">
2840      <arg value="clean"/>
2841    </exec>
2842    </if>
2843    <!-- windows: -->   
2844    <exec executable="nmake" dir="${build.src.home}" osfamily="windows" failonerror="true">
2845      <arg value="/f"/>
2846      <arg value="win32.mak"/>
2847      <arg value="clean"/>
2848      <arg value="GSDLHOME=${gs2build.home}"/>
2849    </exec>
2850  </target>
2851 
2852 
2853  <target name="distclean-build-src" depends="init,clean-build-src" if="collection.building.enabled">
2854    <!-- unix:  -->
2855    <if><bool><available file="${build.src.home}/Makefile"/></bool>
2856    <exec executable="make" os="${os.unix}" dir="${build.src.home}" failonerror="true">
2857      <arg value="distclean"/>
2858    </exec>
2859    </if>
2860    <!-- windows: distclean = clean + remove configure products (remove makefiles). But on Windows there is no removing makefiles, so we just call clean -->   
2861    <exec executable="nmake" dir="${build.src.home}" osfamily="windows" failonerror="true">
2862      <arg value="/f"/>
2863      <arg value="win32.mak"/>
2864      <arg value="clean"/>
2865      <arg value="GSDLHOME=${gs2build.home}"/>
2866    </exec>
2867  </target>
2868 
2869  <target name="configure-build-src" depends="init" if="collection.building.enabled"
2870    description="Configure the build-src component">
2871    <exec executable="${build.src.home}/configure" os="${os.unix}"
2872      dir="${build.src.home}" failonerror="true">
2873      <arg value="--prefix=${gs2build.home}"/>
2874      <arg line="${gs2.opt.args} ${static.arg} ${cross.configure.args} ${allargs}"/>
2875    </exec>
2876  </target>
2877
2878  <!-- common-src is done separately and needs to be compiled first -->
2879  <target name="compile-build-src" depends="init" if="collection.building.enabled">
2880   
2881    <exec executable="make" dir="${build.src.home}" os="${os.unix}" failonerror="true">
2882        <arg line="${ldlpath.arg}"/>
2883    </exec>
2884   
2885    <exec executable="make" dir="${build.src.home}" os="${os.unix}" failonerror="true">
2886      <arg value="install"/>
2887    </exec>
2888
2889    <!-- run the setup script -->
2890    <!-- <exec executable="${compile.windows.c++.setup}" osfamily="windows" failonerror="true"/>-->
2891      <!--Above does not work: even though vcvars.bat executes, the env changes it makes don't get saved. Need user to run vcvars.bat first before calling ant-->
2892      <exec executable="nmake" dir="${build.src.home}" osfamily="windows" failonerror="true">
2893        <arg value="/f"/>
2894        <arg value="win32.mak"/>
2895    <arg value="GSDLHOME=${gs2build.home}"/>
2896      </exec>
2897      <exec executable="nmake" dir="${build.src.home}" osfamily="windows" failonerror="true">
2898        <arg value="/f"/>
2899        <arg value="win32.mak"/>
2900        <arg value="install"/>
2901    <arg value="GSDLHOME=${gs2build.home}"/>
2902      </exec>
2903  </target>
2904 
2905
2906  <!-- ======================== TESTING Targets ========================= -->
2907 
2908  <target name="test" description="Run the (incomplete) JUnit test suite "
2909    depends="init">
2910    <mkdir dir="${basedir}/test"/>
2911    <junit printsummary="withOutAndErr"
2912      errorproperty="test.failed"
2913      failureproperty="test.failed"
2914      fork="${junit.fork}">
2915      <formatter type="plain"/>
2916      <classpath>
2917        <pathelement location="${build.home}/gsdl3test.jar"/>
2918        <path refid="compile.classpath"/>
2919      </classpath>
2920      <test name="${testcase}" if="testcase"/>
2921      <batchtest todir="${basedir}/test" unless="testcase">
2922        <fileset dir="${build.home}" includes="**/*Test.class" />
2923      </batchtest>
2924    </junit>
2925    <echo>
2926      *********************************************
2927      Test output can be found in directory 'test'
2928      *********************************************
2929    </echo>
2930  </target>
2931
2932  <!-- ======================== FLAX Targets ========================= -->
2933  <target name="prepare-flax" description="check out flax source code from another repository" if="install.flax">
2934    <echo>checking out flax ...</echo>
2935    <mkdir dir="${basedir}/src/java/org/flax"/>
2936    <mkdir dir="${basedir}/src/java/org/greenstone/gsdl3/flax"/>
2937    <mkdir dir="${basedir}/src/java/org/greenstone/gsdl3/action/flax"/>
2938    <mkdir dir="${web.home}/WEB-INF/classes/flax"/>
2939    <mkdir dir="${web.home}/interfaces/flax"/>
2940    <mkdir dir="${web.home}/sites/flax"/>
2941    <mkdir dir="${basedir}/flax-resources"/>
2942    <mkdir dir="${basedir}/flax-lib"/>
2943    <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/src/java/org/flax"/>
2944      <arg value="src/java/org/flax"/></exec>
2945    <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/src/java/org/greenstone/gsdl3/flax"/>
2946      <arg value="src/java/org/greenstone/gsdl3/flax"/></exec>
2947    <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/src/java/org/greenstone/gsdl3/action/flax"/>
2948      <arg value="src/java/org/greenstone/gsdl3/action/flax"/></exec>
2949     <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/web/WEB-INF/classes/flax"/>
2950      <arg value="${web.home}/WEB-INF/classes/flax"/></exec>
2951    <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/web/interfaces/flax"/>
2952      <arg value="${web.home}/interfaces/flax"/></exec>
2953    <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/web/sites/flax"/>
2954      <arg value="${web.home}/sites/flax"/></exec>
2955    <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/flax-resources"/>
2956      <arg value="flax-resources"/></exec>
2957    <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/lib"/>
2958      <arg value="flax-lib"/></exec>
2959    <antcall target="flax-copy-del-files" />
2960  </target>
2961 
2962  <target name="flax-copy-del-files" description="copy some flax files into the appropriate greenstone3 directories and delete some unwanted greenstone stuff">
2963    <copy file="${web.home}/WEB-INF/classes/flax/web.xml" todir="${web.home}/WEB-INF" overwrite="true" />
2964    <copy todir="${web.home}/WEB-INF/lib">
2965            <fileset dir="${basedir}/flax-lib">
2966               <include name="*.jar"/>
2967            </fileset> 
2968    </copy>
2969    <!--<delete dir="${web.home}/sites/gateway"/>
2970    <delete dir="${web.home}/sites/localsite"/>-->
2971  </target>
2972
2973  <target name="update-flax" description="update flax from repository">
2974    <echo>updating flax ...</echo>
2975    <exec executable="svn"><arg value="update"/>
2976      <arg value="src/java/org/flax"/></exec>
2977    <exec executable="svn"><arg value="update"/>
2978      <arg value="src/java/org/greenstone/gsdl3/action/flax"/></exec>
2979    <exec executable="svn"><arg value="update"/>
2980      <arg value="src/java/org/greenstone/gsdl3/flax"/></exec>
2981    <exec executable="svn"><arg value="update"/>
2982      <arg value="${web.home}/WEB-INF/classes/flax"/></exec>
2983    <exec executable="svn"><arg value="update"/>
2984      <arg value="${web.home}/interfaces/flax"/></exec>
2985    <exec executable="svn"><arg value="update"/>
2986      <arg value="${web.home}/web/sites/flax"/></exec>
2987    <exec executable="svn"><arg value="update"/>
2988      <arg value="flax-resources"/></exec>
2989    <exec executable="svn"><arg value="update"/>
2990      <arg value="flax-lib"/></exec>
2991    <antcall target="compile-core" />
2992  </target>
2993
2994  <!-- ========================End of FLAX Targets ========================= -->
2995
2996  <target name="compile-javadocs">
2997    <javadoc packagenames="org.greenstone.*"
2998           sourcepath="src/java"
2999           defaultexcludes="yes"
3000           destdir="docs/javadoc"
3001           author="true"
3002           version="true"
3003           use="true"
3004           windowtitle="Greenstone3 API">
3005    <doctitle><![CDATA[<h1>Greenstone3 API</h1>]]></doctitle>
3006    </javadoc>
3007  </target>
3008
3009<!-- ========== Some distribution targets ======================== -->
3010  <target name="remove-source">
3011    <if><bool><isset property="with.gli.and.gems"/></bool>
3012    <delete includeEmptyDirs="true">
3013      <fileset dir="." defaultexcludes="false">
3014        <patternset refid="greenstone3.source.component"/>
3015     </fileset>
3016    </delete>
3017   
3018    <else>
3019    <delete includeEmptyDirs="true">
3020      <fileset dir="." defaultexcludes="false">
3021        <patternset refid="greenstone3.source.no.gli.component"/>
3022     </fileset>
3023    </delete>
3024    </else>
3025    </if>
3026  </target>
3027
3028  <target name="dist-tidy"
3029    description="'tidies-up' a greenstone3 installation for distribution.">
3030
3031    <!-- delete unneeded things -->
3032    <delete dir="${packages.home}/axis"/>
3033    <delete><fileset dir="${packages.home}" includes="*.zip"/></delete>
3034    <delete file="README-SVN.txt"/>
3035    <delete file="build.properties.in"/>
3036
3037    <!-- delete source files -->
3038    <antcall target="remove-source"/>
3039
3040    <!-- create empty directories -->
3041    <mkdir dir="${web.writablehome}/applet"/>
3042    <mkdir dir="${web.writablehome}/logs"/>
3043    <mkdir dir="${web.writablehome}/logs/tmp"/>
3044
3045    <!-- Lines with ***** are commented out because these files are useful if we want hybrid installations -->
3046   
3047    <!-- os specific tidy-ups -->
3048    <!-- linux, mac -->
3049    <if><bool><istrue value="${current.os.isunix}"/></bool>
3050      <!--*****<delete><fileset dir="." includes="*.bat"/></delete>-->
3051      <if><bool><isset property="with.gli.and.gems"/></bool>
3052        <!--*****<delete><fileset dir="gli" includes="*.bat"/></delete>-->
3053      </if>
3054      <!--*****<delete><fileset dir="gs2build" includes="*.bat"/></delete>-->
3055      <!--*****<delete><fileset dir="bin/script" includes="*.bat"/></delete>-->
3056      <delete file="${basedir}/gs2build/win32cfg.h"/>
3057      <delete file="${basedir}/gs2build/win32.mak"/>
3058      <delete dir="${basedir}/winutil"/>
3059      <delete failonerror="false"><fileset dir="${lib.jni}" includes="*.dll"/></delete>
3060
3061    <!-- windows -->
3062    <else><if><bool><istrue value="${current.os.iswindows}"/></bool>
3063      <!--*****<delete><fileset dir="." includes="*.sh,*.bash,*.csh"/></delete>-->
3064      <if><bool><isset property="with.gli.and.gems"/></bool>
3065    <!--*****<delete><fileset dir="gli" includes="*.sh,*.bash,*.csh"/></delete>-->
3066      </if>
3067      <!--*****<delete><fileset dir="gs2build" includes="*.sh,*.bash,*.csh"/></delete>-->
3068      <!--*****<delete><fileset dir="bin/script" includes="*.sh,*.bash,*.csh"/></delete>-->
3069    </if></else></if>
3070
3071  </target>
3072
3073  <!-- fix up executable permissions for binary release -->
3074  <target name="fix-execute-permissions">
3075    <echo>Setting binaries to executable</echo>
3076    <chmod perm="775">
3077      <fileset dir="."><patternset refid="greenstone3.executables"/></fileset>
3078    </chmod>
3079  </target>
3080 
3081  <!-- fix up executable permissions for source code release -->
3082  <target name="fix-execute-permissions-source">
3083    <chmod perm="775">
3084      <fileset dir="."><patternset refid="greenstone3.source.executables"/></fileset>
3085    </chmod>
3086  </target>
3087
3088  <!-- for macs, set up the .app shortcuts to gsi, gli, client-gli and gems -->
3089  <target name="gen-mac-shortcuts">   
3090    <if><bool><istrue value="${current.os.ismac}"/></bool>
3091      <filter token="gsdl3srchome" value="${basedir}"/>
3092      <copy file="${basedir}/gs3-server.app/Contents/document.wflow.in" tofile="${basedir}/gs3-server.app/Contents/document.wflow" filtering="true" overwrite="true"/>
3093      <copy file="${basedir}/gli.app/Contents/document.wflow.in" tofile="${basedir}/gli.app/Contents/document.wflow" filtering="true" overwrite="true"/>
3094      <copy file="${basedir}/client-gli.app/Contents/document.wflow.in" tofile="${basedir}/client-gli.app/Contents/document.wflow" filtering="true" overwrite="true"/>
3095      <copy file="${basedir}/gems.app/Contents/document.wflow.in" tofile="${basedir}/gems.app/Contents/document.wflow" filtering="true" overwrite="true"/>
3096    </if>
3097  </target>
3098
3099  <!-- ============= tweaks for making compilation static ========== --> 
3100  <target name="tweak-makefiles" depends="init" if="compile.static">
3101    <antcall target="rtftohtml-add-static" />
3102  </target>
3103   
3104  <target name="rtftohtml-add-static" depends="init" if="collection.building.enabled">
3105    <rsr verbosity="1" file="${gs2build.home}/build-src/packages/rtftohtml/rtftohtml_src/Makefile" pattern="-o rtftohtml(.{2})EXEEXT(.{1})" replacement="-o rtftohtml$1EXEEXT$2 -static" />
3106  </target>
3107   
3108    <target name="run-collection-tests">
3109        <if><bool><not><available file="${basedir}/ext/testing" type="dir"/></not></bool>
3110            <fail>The testing extension is not available. This is required to perform the tests. It can be acquired from SVN by running the command "svn co http://svn.greenstone.org/gs3-extensions/testing/trunk/src testing" in the ext directory of your Greenstone 3 installation. </fail>
3111        </if>
3112        <for param="testjar">
3113            <path>
3114                <fileset dir="${basedir}" includes="web/sites/*/collect/*/tests/tests.jar"/>
3115            </path>
3116            <sequential>
3117                <echo>Testing @{testjar}</echo>
3118                <java classname="org.junit.runner.JUnitCore" fork="true">
3119                    <arg value="gstests.TestClass"/>
3120                    <jvmarg value="-DSERVERURL=http://${tomcat.server}:${tomcat.port}${app.path}${server.default.servlet} "/>
3121                    <classpath>
3122                        <fileset dir="${basedir}/ext/testing/lib/java">
3123                            <include name="*.jar"/>
3124                        </fileset>
3125                        <files includes="@{testjar}"/>
3126                    </classpath>
3127                </java>
3128            </sequential>
3129        </for>
3130    </target>
3131   
3132    <target name="build-collection-tests">
3133        <if><bool><not><available file="${basedir}/ext/testing" type="dir"/></not></bool>
3134            <fail>The testing extension is not available. This is required to perform the tests. It can be acquired from SVN by running the command "svn co http://svn.greenstone.org/gs3-extensions/testing/trunk/src testing" in the ext directory of your Greenstone 3 installation. </fail>
3135        </if>
3136        <for param="compiledir">
3137            <path>
3138                <dirset dir="${basedir}" includes="web/sites/*/collect/*/tests/src"/>
3139            </path>
3140            <sequential>
3141                <echo>Compiling @{compiledir}</echo>
3142                <if><bool><not><available file="@{compiledir}/../build" type="dir"/></not></bool>
3143                    <mkdir dir="@{compiledir}/../build"/>
3144                </if>
3145                <javac
3146                    srcdir="@{compiledir}"
3147                    destdir="@{compiledir}/../build"
3148                        includeantruntime="${compile.includeantruntime}"
3149                    debug="${compile.debug}"
3150                    deprecation="${compile.deprecation}"
3151                    optimize="${compile.optimize}">
3152                    <classpath>
3153                        <fileset dir="${basedir}/ext/testing/lib/java">
3154                            <include name="*.jar"/>
3155                        </fileset>
3156                    </classpath>
3157                    <include name="gstests/*.java"/>
3158                </javac>
3159                <jar destfile="@{compiledir}/../tests.jar">
3160                    <fileset dir="@{compiledir}/../build">
3161                        <include name="gstests/**"/>
3162                    </fileset>
3163                    <manifest>
3164                        <attribute name="Built-By" value="${user.name}" />
3165                    </manifest>
3166                </jar>
3167            </sequential>
3168        </for>
3169    </target>
3170</project>
Note: See TracBrowser for help on using the browser.