source: main/trunk/greenstone3/build.xml@ 32471

Last change on this file since 32471 was 32465, checked in by ak19, 6 years ago

Correcting requirements for setting up https certification as still applied to windows and linux.
File size: 176.8 KB
Line 
1<?xml version="1.0"?>
2<!-- ======================================================================
3 March 2005
4
5 Greenstone3 build and install script
6
7 kjdon
8 ====================================================================== -->
9<project name="greenstone3" default="usage" basedir=".">
10 <echo>os.name: ${os.name}</echo>
11
12 <!-- ============ classpath =================== -->
13 <path id="project.classpath">
14 <fileset dir="lib/java">
15 <include name="**/*.jar"/>
16 </fileset>
17 </path>
18
19 <!-- ============ self defined tasks =================== -->
20 <taskdef name="mysetproxy" classname="org.greenstone.anttasks.MySetProxy" classpathref="project.classpath"/>
21 <taskdef name="getuserandpassword" classname="org.greenstone.anttasks.MyGetUserAndPassword" classpathref="project.classpath"/>
22 <taskdef name="rsr" classname="org.greenstone.anttasks.RegexSearchReplace" classpathref="project.classpath"/>
23 <!--<taskdef name="svn" classname="org.tigris.subversion.svnant.SvnTask" classpathref="project.classpath"/>-->
24 <taskdef name="if" classname="ise.antelope.tasks.IfTask" classpathref="project.classpath"/>
25 <taskdef name="for" classname="net.sf.antcontrib.logic.ForTask" classpathref="project.classpath"/>
26 <taskdef name="stringutil" classname="ise.antelope.tasks.StringUtilTask" classpathref="project.classpath"/>
27
28
29 <!-- ===================== Property Definitions =========================== -->
30
31 <!--
32
33 Each of the following properties are used in the build script.
34 Values for these properties are set by the first place they are
35 defined, from the following list:
36
37 * Definitions on the "ant" command line (ant -Dfoo=bar compile).
38
39 * Definitions from a "build.properties" file in the top level
40 source directory of this application.
41
42 * Definitions from a "build.properties" file in the user's
43 home directory.
44
45 * Default definitions in this build.xml file.
46
47 You will note below that property values can be composed based on the
48 contents of previously defined properties. This is a powerful technique
49 that helps you minimize the number of changes required when your development
50 environment is modified. Note that property composition is allowed within
51 "build.properties" files as well as in the "build.xml" script.
52
53 -->
54
55 <!-- Developer property. Set value=true if you want test https certificates issued
56 (as there's a limit on how many real certificates you can be issued per week).
57 If not testing can either uncomment this property or set value=false.
58 BEWARE: iff test.mode is true (so https.testing gets set to minus-minus-staging)
59 AND the default protocol is https (server.protocols contains https first), the
60 check-tomcat-running target and any other targets running an ant http condition
61 to test the default GS DL URL (which will be over https) won't work.
62 This is because the testing certificate is not trusted by clients, in this case
63 the ant http condition. (Clients that are browsers can be set to temporarily
64 trust the testing certificate, but don't know how to make ant do that, maybe it
65 needs to be done at Java level.)
66 Ant socket conditions to the URL will work because socket tests don't use
67 the protocol, just the host and port.
68 -->
69 <property name="https.test.mode" value="false"/>
70
71 <property name="os.linux" value="Linux"/>
72 <property name="os.mac" value="Mac OS X"/>
73 <property name="os.solaris" value="SunOS"/>
74 <property name="os.unix" value="${os.linux},${os.mac},${os.solaris}"/>
75 <property name="os.windows" value="Windows 95,Windows 98,Windows 2000,Windows 2003,Windows XP,Windows NT,Windows ME,Windows Vista,Windows 7,Windows Server 2008,Windows Server 2008 R2"/> <!-- check this!!!-->
76
77 <!-- this is true for linux and macs -->
78 <condition property="current.os.isunix">
79 <os family="unix"/>
80 </condition>
81
82 <condition property="current.os.isunixnotmac">
83 <and>
84 <os family="unix"/>
85 <not>
86 <os family="mac"/>
87 </not>
88 </and>
89 </condition>
90
91 <condition property="current.os.ismac">
92 <os family="mac"/>
93 </condition>
94
95 <condition property="current.os.iswindows">
96 <os family="windows"/>
97 </condition>
98
99 <!-- create build.properties if it has not been created yet -->
100 <if>
101 <bool><not><available file="build.properties"/></not></bool>
102 <copy file="build.properties.svn" tofile="build.properties"/>
103 <property name="first.run" value="true"/>
104 </if>
105
106 <!-- create the packages dir if it has not been created yet -->
107 <mkdir dir="packages"/>
108
109 <!--the first three properties have to be put on the top to be used by build.properties-->
110 <property name="gs2build.home" value="${basedir}${file.separator}gs2build"/>
111 <property name="src.packages.home" value="${basedir}/src/packages"/>
112 <property name="flax.svn.root" value="http://svn.greenstone.org/flax"/>
113
114 <property name="solr-ext.home" value="${basedir}/ext/solr"/>
115
116 <property file="build.properties"/>
117 <if><bool><available file="${user.home}/build.properties"/></bool>
118 <property file="${user.home}/build.properties"/>
119 </if>
120
121 <if>
122 <bool><not><matches string="${server.protocols}" pattern="^\s*(https?|http\s*,\s*https|https\s*,\s*http)\s*$"/></not></bool>
123 <fail>@@@@
124 In file build.properties: invalid value for server.protocols.
125 It must contain http or https, or both (in order of preference) separated by commas.
126 </fail>
127 </if>
128
129 <!--
130 * "valid ports range from 1024–49151" is probably about user assignable ports.
131 But 80 is a valid port for running web servers including GS
132 and in future the range may become greater, so don't restrict the port range to 1024-49151.
133 https://stackoverflow.com/questions/113224/what-is-the-largest-tcp-ip-network-port-number-allowable-for-ipv4
134 -->
135 <if>
136 <bool>
137 <not><matches string="${localhost.port.http}" pattern="^\d{2,}\s*$"/></not>
138 </bool>
139 <fail>...
140 ********* ERROR: localhost.port.http in file build.properties is set to an invalid port number.
141 If port 80 is not possible, user assignable ports range from 1024–49151.
142 But don't choose any port already in use by another application.
143 Try setting to localhost.port.http=8383
144 </fail>
145 </if>
146
147 <!-- if server.protocols contains https, ensure its port number is valid -->
148 <if>
149 <bool>
150 <and>
151 <matches string="${server.protocols}" pattern="https"/>
152 <not><matches string="${tomcat.port.https}" pattern="^\d{2,}\s*$"/></not>
153 </and>
154 </bool>
155 <fail>...
156 ********* ERROR: in file build.properties, server.protocols includes https but
157 tomcat.port.https is set to an invalid port number.
158 If port 443 is not possible, user assignable ports range from 1024–49151.
159 But don't choose any port already in use by another application.
160 Try setting tomcat.port.https=8443
161 </fail>
162 </if>
163
164 <!--
165 Bail if https is enabled but the keystore password (keystore.pass property) is not set.
166 However, keystore.pass has no default value and is therefore not set as a rule.
167 So don't bail when 'ant' is run for the first time to create build.props from build.props.svn.
168 But do bail if running ant.prepare and https enabled and password not set.
169 (Maybe put this entire section before the first target: so we only bail after all non-targets
170 are executed so that any other first ever initialisation is completed?)
171 -->
172 <if>
173 <bool>
174 <and>
175 <matches string="${server.protocols}" pattern="https"/>
176 <or>
177 <not><isset property="keystore.pass"/></not>
178 <matches string="${keystore.pass}" pattern="^\s*$"/>
179 </or>
180 </and>
181 </bool>
182 <if>
183 <bool><isset property="first.run"/></bool>
184 <echo>IMPORTANT: In file build.properties, when property server.protocols includes https,
185 as now, the keystore.pass property must be set to a non-empty value.
186 Either set server.protocols to http by itself, if you don't want support for https,
187 or set keystore.pass if you do want https support.</echo>
188 <else>
189 <fail>...
190 ********* ERROR: server.protocols contains https in file build.properties, but the keystore.pass
191 property required for obtaining/renewing the https certificate is not set or is set to the empty
192 string. Choose a password for keystore.pass and set it in build.properties before proceeding.
193 </fail>
194 </else>
195 </if>
196 </if>
197
198 <!-- Set the keystore file name for linux versus windows. Ultimately unused/inactive if HTTPS
199 isn't enabled and no certificate obtained. We don't yet have https certification on mac -->
200 <condition property="keystore.file" value="fullchain_and_prvtkey.pfx" else="fullchain_and_prvtkey.p12">
201 <istrue value="${current.os.iswindows}"/>
202 </condition>
203
204 <!-- Originally, https redirectPort when using regular http port 8383
205 was always fixed at 8443. Now we use redirectPort=tomcat.port.https.
206 -->
207 <property name="https.redirect.port" value="${tomcat.port.https}"/>
208
209 <!-- The default protocol to be used is the FIRST in the comma separated list for server.protocols
210 The default public tomcat port depends on the default server protocol
211 -->
212 <if>
213 <bool><matches string="${server.protocols}" pattern="^https"/></bool>
214 <property name="default.server.protocol" value="https"/>
215 <property name="default.tomcat.port" value="${tomcat.port.https}"/>
216 <else>
217 <property name="default.server.protocol" value="http"/>
218 <property name="default.tomcat.port" value="${localhost.port.http}"/>
219 </else>
220 </if>
221
222
223 <!-- For setting filter tokens.
224 Used to set up server.xml when configuring tomcat -->
225 <property name="comment.start" value="&lt;!--" />
226 <property name="comment.end" value="--&gt;" />
227
228 <!--
229 If https is enabled, regardless of whether it is the default protocol,
230 there's some more work to do:
231 -
232 - if https is not enabled, comment out its Connecter element in server.xml
233 -->
234 <if>
235 <bool><matches string="${server.protocols}" pattern="https"/></bool>
236 <property name="https.comment.out.start" value=""/>
237 <property name="https.comment.out.end" value=""/>
238
239 <else>
240 <property name="https.comment.out.start" value="${comment.start}"/>
241 <property name="https.comment.out.end" value="${comment.end}"/>
242 </else>
243 </if>
244
245 <!-- if server.protocols doesn't contain http, then http is only to be locally available,
246 e.g. for solr servlet on 127.0.0.1
247 In that case, see https://serverfault.com/questions/218666/how-to-configure-tomcat-to-only-listen-to-127-0-0-1
248 -->
249 <condition property="restrict.http.to.local" value="false" else="true">
250 <matches string="${server.protocols}" pattern="http($|\s+|,)"/>
251 </condition>
252
253 <condition property="http.address.restriction" value="address=&quot;127.0.0.1&quot;" else="">
254 <istrue value="${restrict.http.to.local}"/>
255 </condition>
256
257 <!-- No certificates for localhost: https://letsencrypt.org/docs/certificates-for-localhost/
258 But 'localhost' (or actually, 127.0.0.1) needed for solr: solr servlet not accessible to outside world
259 -->
260 <condition property="local.http.url" value="http://${localhost.server.http}" else="http://${localhost.server.http}:${localhost.port.http}">
261 <equals arg1="${localhost.port.http}" arg2="80" trim="true"/>
262 </condition>
263
264 <!-- On linux, if testing https certification, pass in minus-minus-staging. If not testing on linux, nothing extra to pass in.
265 On windows, if testing https certification, nothing extra to pass in. If not testing on windows, pass in minus-minus-live.
266 No https certification automation (yet) for macs.
267 -->
268 <if><bool><istrue value="${current.os.isunixnotmac}"/></bool>
269 <condition property="https.testing" value="" else="--staging">
270 <isfalse value="${https.test.mode}"/>
271 </condition>
272 </if>
273 <if><bool><istrue value="${current.os.iswindows}"/></bool>
274 <condition property="https.testing" value="--live" else="">
275 <isfalse value="${https.test.mode}"/>
276 </condition>
277 <!-- Set bitness of windows OS, so we can use it for the zeroSSL executable.
278 The Java system property os.arch will return x86 for 32 bit and AMD64 (or x64) for 64 bit OS.
279 See https://stackoverflow.com/questions/20856694/how-to-find-the-os-bit-type -->
280 <condition property="os.bitness" value="64" else="32">
281 <matches string="${os.arch}" pattern="64"/>
282 </condition>
283 </if>
284
285 <!-- now we've read in properties, apply defaults -->
286 <property name="disable.collection.building" value="false"/>
287
288 <!-- get properties from the environment -->
289 <property environment="env"/>
290
291 <!-- get the filesets defining components and executables -->
292 <import file="resources/xml/components.xml"/>
293 <import file="resources/xml/executables.xml"/>
294
295 <!-- version properties for external packages -->
296 <!-- for Java versions < 1.4, we print out the message that Java is too old.
297 For Java 1.4, we use Tomcat 5.5, for Java5 and higher, we use Tomcat 7.0-->
298 <condition property="tomcat.version" value="apache-tomcat-5.5.25" else="apache-tomcat-7.0.57">
299 <equals arg1="1.4" arg2="${ant.java.version}"/>
300 </condition>
301 <condition property="tomcat.version.major" value="5" else="7">
302 <equals arg1="1.4" arg2="${ant.java.version}"/>
303 </condition>
304 <condition property="privileged.attribute" value="privileged='true'" else="">
305 <equals arg1="7" arg2="${tomcat.version.major}"/>
306 </condition>
307
308 <!-- external access to the GS3 pages or not
309 https://tomcat.apache.org/tomcat-7.0-doc/config/valve.html -->
310 <condition property="allowed.IPs"
311 value=".*"
312 else="(127\.0\.0\.1|::1|0:0:0:0:0:0:0:1)">
313 <matches pattern="^(1|true|yes)$" string="${server.external.access}"/>
314 </condition>
315
316 <property name="axis.zip.version" value="axis-bin-1_4.zip"/>
317 <property name="axis.dir.version" value="axis-1_4"/>
318 <property name="sqlite.targz.version" value="sqlite-autoconf-3070602.tar.gz"/>
319
320 <property name="build.home" value="${basedir}/build"/>
321 <property name="src.home" value="${basedir}/src/java"/>
322
323 <if><bool><istrue value="${gsdl3home.isreadonly}"/></bool>
324 <property name="readonly-packages.home" value="${basedir}/packages"/>
325 <property name="packages.home" value="${gsdl3.writablehome}/packages"/>
326 <!--
327 To run solr from a read-only location (like a DVD-ROM), its locktype needs to be "single",
328 else solr tries to write out a lock file to the collection's index folder which is read-only.
329
330 https://cwiki.apache.org/confluence/display/solr/IndexConfig+in+SolrConfig
331 says that the "single" locktype is "for special situations of a read-only index directory, or ...."
332
333 See also http://wiki.apache.org/lucene-java/AvailableLockFactories
334 And look for the documentation on "locktype" in solr collection's etc/conf/solrconfig.xml
335 for further information on the different locktypes.
336
337 To set the locktype property from the commandline (it's a property to the server web), pass in
338 "-Dsolr.lock.type=..." to the web server, as explained in
339 http://lucene.472066.n3.nabble.com/Where-can-we-set-the-parameters-in-Solr-Config-td4183706.html
340 -->
341 <property name="readonly.catalina.opts" value="-Dsolr.lock.type=single"/>
342 <else>
343 <property name="packages.home" value="${basedir}/packages"/>
344 <property name="readonly.catalina.opts" value=""/>
345 </else>
346 </if>
347
348 <!-- this may be set in build.properties, e.g. if you move the web dir to
349 tomcats webapps directory -->
350 <property name="web.home" value="${basedir}/web"/>
351 <property name="web.writablehome" value="${gsdl3.writablehome}"/>
352 <!-- If using a dispersed GS3 web folder, then the user web would not contain everything in the
353 default GS3 web (it won't contain a CGI or lib folder inside WEB-INF, for instance) -->
354 <if>
355 <bool><available file="${web.home}/WEB-INF/cgi" type="dir"/></bool>
356 <property name="full.web.dir" value="${web.home}"/>
357 <else>
358 <property name="full.web.dir" value="${basedir}/web"/>
359 </else>
360 </if>
361
362 <!-- jar files needed by applets go here -->
363 <property name="web.applet" value="${web.home}/applet"/>
364
365 <!-- jar files needed by the servlet (and extra ones) go here -->
366 <property name="web.lib" value="${web.home}/WEB-INF/lib"/>
367 <property name="web.writablelib" value="${web.writablehome}/WEB-INF/lib"/>
368 <!-- other files needed by the servlet go here -->
369 <property name="web.classes" value="${web.home}/WEB-INF/classes"/>
370 <property name="web.writableclasses" value="${web.writablehome}/WEB-INF/classes"/>
371
372 <if>
373 <bool><istrue value="${gsdl3home.isreadonly}"/></bool>
374 <echo>Greenstone3 home directory is read-only</echo>
375 <echo> => Writable area is: ${gsdl3.writablehome}</echo>
376
377 <condition property="gsdl3.writablehome.already-exists">
378 <available file="${gsdl3.writablehome}" type="dir"/>
379 </condition>
380
381 <if>
382 <bool><not><istrue value="${gsdl3.writablehome.already-exists}"/></not></bool>
383
384 <!-- set up writable area -->
385 <echo>No previous Greenstone home writable area detected</echo>
386 <echo> => Setting up area</echo>
387 <mkdir dir="${gsdl3.writablehome}"/>
388 <mkdir dir="${gsdl3.writablehome}/packages"/>
389 <mkdir dir="${gsdl3.writablehome}/logs"/>
390 <mkdir dir="${gsdl3.writablehome}/ext/solr"/>
391
392 <chmod perm="a+rwx" dir="${gsdl3.writablehome}"/>
393 <chmod perm="a+rwx" dir="${gsdl3.writablehome}/packages"/>
394 <chmod perm="a+rwx" dir="${gsdl3.writablehome}/logs"/>
395 <chmod perm="a+rwx" dir="${gsdl3.writablehome}/ext/solr"/>
396
397 <!-- copy over packages tomcat folder -->
398
399 <if>
400 <bool><istrue value="${current.os.iswindows}"/></bool>
401 <copy todir="${gsdl3.writablehome}/packages/tomcat"
402 preservelastmodified="true"
403 failonerror="true" >
404 <fileset dir="${readonly-packages.home}/tomcat" includes="**"/>
405 </copy>
406
407 <else>
408 <!-- else assume Unix -->
409 <!-- Can't go through the OS-independent <copy> task as it fails to preserve exec permissions -->
410 <echo>Copying to ${gsdl3.writablehome}/packages/tomcat</echo>
411 <exec executable="cp" output="/dev/null" spawn="false">
412 <arg value="-r"/>
413 <arg value="${readonly-packages.home}/tomcat"/>
414 <arg value="${gsdl3.writablehome}/packages/."/>
415 </exec>
416
417 <!-- the packages folder in tmp only has read permissions at this stage, it needs more permissions to work when running GS3 off a disc -->
418 <chmod perm="a+rwx" file="${gsdl3.writablehome}/packages/**" />
419
420 </else>
421 </if>
422
423 <echo> => Copying Greenstone's web/WEB-INF to writable area</echo>
424 <copy todir="${gsdl3.writablehome}/WEB-INF"
425 preservelastmodified="true"
426 failonerror="true" >
427 <fileset dir="${full.web.dir}/WEB-INF" includes="**"/>
428 </copy>
429
430 <copy todir="${gsdl3.writablehome}"
431 preservelastmodified="true"
432 failonerror="true" >
433 <fileset dir="${web.home}" includes="index.html"/>
434 </copy>
435
436 </if>
437 </if>
438
439
440 <!--- flax: the WordNet home -->
441 <property name="wn.home" value="${web.home}/WEB-INF/classes/flax/WordNet"/>
442
443 <!-- jni libraries and java wrappers go here -->
444 <property name="lib.jni" value="${basedir}/lib/jni"/>
445
446 <!-- other jar files needed for installation (but not runtime) go here -->
447 <property name="lib.java" value="${basedir}/lib/java"/>
448
449 <property name="javadocs" value="${basedir}/docs/javadoc"/>
450
451 <property name="app.name" value="greenstone3"/>
452 <property name="app.path" value="/${greenstone.context}"/>
453
454 <property name="admin.dir" value="${basedir}/admin"/>
455
456 <!-- defaults - set these on the command line or in build.properties or
457 they will take these default values-->
458 <property name="app.version" value="trunk"/>
459 <property name="branch.path" value="trunk"/>
460 <property name="branch.revision" value="HEAD"/>
461
462 <!--constants -->
463 <property name="svn.root" value="http://svn.greenstone.org"/>
464
465 <!-- catalina home is set to tomcat basedir if already installed, otherwise
466 use greenstone's tomcat -->
467 <condition property="catalina.home" value="${tomcat.installed.path}" else="${packages.home}/tomcat">
468 <and>
469 <isset property="tomcat.installed.path"/>
470 <not>
471 <equals arg1="" arg2="${tomcat.installed.path}"/>
472 </not>
473 </and>
474 </condition>
475
476
477 <!-- is there a better way to do this?? what about solaris?? -->
478 <condition property="os.bin.dir" value="${cross.os}">
479 <istrue value="${compile.cross}"/>
480 </condition>
481 <condition property="os.bin.dir" value="windows">
482 <os family="windows"/>
483 </condition>
484 <condition property="os.bin.dir" value="darwin">
485 <os family="mac"/>
486 </condition>
487 <condition property="os.bin.dir" value="linux">
488 <and>
489 <os family="unix"/>
490 <not>
491 <os family="mac"/>
492 </not>
493 </and>
494 </condition>
495
496
497 <condition property="collection.building.disabled">
498 <and>
499 <isset property="disable.collection.building"/>
500 <istrue value="${disable.collection.building}"/>
501 </and>
502 </condition>
503
504 <condition property="collection.building.enabled">
505 <not>
506 <istrue value="${disable.collection.building}"/>
507 </not>
508 </condition>
509
510 <condition property="collection.building.enabled.windows">
511 <and>
512 <istrue value="${collection.building.enabled}"/>
513 <isset property="current.os.iswindows"/>
514 </and>
515 </condition>
516
517 <condition property="collection.building.enabled.unix">
518 <and>
519 <istrue value="${collection.building.enabled}"/>
520 <isset property="current.os.isunix"/>
521 </and>
522 </condition>
523
524 <condition property="static.arg" value="LDFLAGS=-static" else=" ">
525 <isset property="compile.static"/>
526 </condition>
527
528 <!-- If building a release then we want to adjust environment variables so that the support library can be seen during compilation -->
529 <if><bool><isset property="use.gnomelib.ext"/></bool>
530 <property name="gnome-lib-dir" value="${basedir}/ext/gnome-lib-minimal/${os.bin.dir}"/>
531
532 <if><bool><isset property="env.CFLAGS"/></bool>
533 <property name="cflags.arg" value="CFLAGS=&quot;-I${gnome-lib-dir}/include ${env.CFLAGS}&quot;"/>
534 <else>
535 <property name="cflags.arg" value="CFLAGS=&quot;-I${gnome-lib-dir}/include&quot;"/>
536 </else>
537 </if>
538
539 <if><bool><isset property="env.CPPFLAGS"/></bool>
540 <property name="cppflags.arg" value="CPPFLAGS=&quot;-I${gnome-lib-dir}/include ${env.CPPFLAGS}&quot;"/>
541 <else>
542 <property name="cppflags.arg" value="CPPFLAGS=&quot;-I${gnome-lib-dir}/include&quot;"/>
543 </else>
544 </if>
545
546 <if><bool><isset property="env.CXXFLAGS"/></bool>
547 <property name="cxxflags.arg" value="CXXFLAGS=&quot;-I${gnome-lib-dir}/include ${env.CXXFLAGS}&quot;"/>
548 <else>
549 <property name="cxxflags.arg" value="CXXFLAGS=&quot;-I${gnome-lib-dir}/include&quot;"/>
550 </else>
551 </if>
552
553 <!--https://groups.google.com/forum/#!topic/openkinect/m-hfXeYwKtU
554 compiling up libwv on ElCapitan needs -framework CoreFoundation -->
555 <if><bool><isset property="env.LDFLAGS"/></bool>
556 <property name="ldflags.arg" value="LDFLAGS=&quot;-L${gnome-lib-dir}/lib ${env.LDFLAGS}&quot;"/>
557 <else>
558 <property name="ldflags.arg" value="LDFLAGS=&quot;-L${gnome-lib-dir}/lib&quot;"/>
559 </else>
560 </if>
561
562 <if><bool><isset property="env.PATH"/></bool>
563 <property name="path.arg" value="PATH=&quot;${gnome-lib-dir}/bin:${env.PATH}&quot;"/>
564 <else>
565 <property name="path.arg" value="PATH=&quot;${gnome-lib-dir}/bin&quot;"/>
566 </else>
567 </if>
568
569 <if><bool><isset property="env.PKG_CONFIG_PATH"/></bool>
570 <property name="pcpath.arg" value="PKG_CONFIG_PATH=&quot;${gnome-lib-dir}/lib/pkgconfig:${env.PKG_CONFIG_PATH}&quot;"/>
571 <else>
572 <property name="pcpath.arg" value="PKG_CONFIG_PATH=&quot;${gnome-lib-dir}/lib/pkgconfig&quot;"/>
573 </else>
574 </if>
575
576 <if><bool><equals arg1="${os.bin.dir}" arg2="darwin"/></bool>
577 <!--<if><bool><isset property="env.DYLD_LIBRARY_PATH"/></bool>
578 <property name="ldlpath.arg" value="DYLD_LIBRARY_PATH=&quot;${gnome-lib-dir}/lib:${env.DYLD_LIBRARY_PATH}&quot;"/>
579 <else>
580 <property name="ldlpath.arg" value="DYLD_LIBRARY_PATH=&quot;${gnome-lib-dir}/lib&quot;"/>
581 </else>
582 </if>
583 -->
584 <property name="ldlpath.arg" value="DYLD_LIBRARY_PATH=&quot;${env.DYLD_LIBRARY_PATH}&quot;"/>
585 <else>
586 <if><bool><isset property="env.LD_LIBRARY_PATH"/></bool>
587 <property name="ldlpath.arg" value="LD_LIBRARY_PATH=&quot;${gnome-lib-dir}/lib:${env.LD_LIBRARY_PATH}&quot;"/>
588 <else>
589 <property name="ldlpath.arg" value="LD_LIBRARY_PATH=&quot;${gnome-lib-dir}/lib&quot;"/>
590 </else>
591 </if>
592 </else>
593 </if>
594
595
596 <else>
597 <if><bool><isset property="env.CFLAGS"/></bool>
598 <property name="cflags.arg" value="CFLAGS=&quot;${env.CFLAGS}&quot;"/>
599 <else>
600 <property name="cflags.arg" value=" "/>
601 </else>
602 </if>
603
604 <if><bool><isset property="env.CPPFLAGS"/></bool>
605 <property name="cppflags.arg" value="CPPFLAGS=&quot;${env.CPPFLAGS}&quot;"/>
606 <else>
607 <property name="cppflags.arg" value=" "/>
608 </else>
609 </if>
610
611 <if><bool><isset property="env.CXXFLAGS"/></bool>
612 <property name="cxxflags.arg" value="CXXFLAGS=&quot;${env.CXXFLAGS}&quot;"/>
613 <else>
614 <property name="cxxflags.arg" value=" "/>
615 </else>
616 </if>
617
618 <if><bool><isset property="env.LDFLAGS"/></bool>
619 <property name="ldflags.arg" value="LDFLAGS=&quot;${env.LDFLAGS}&quot;"/>
620 <else>
621 <property name="ldflags.arg" value=" "/>
622 </else>
623 </if>
624
625 <if><bool><isset property="env.PATH"/></bool>
626 <property name="path.arg" value="PATH=&quot;${env.PATH}&quot;"/>
627 <else>
628 <property name="path.arg" value=" "/>
629 </else>
630 </if>
631
632 <if><bool><isset property="env.PKG_CONFIG_PATH"/></bool>
633 <property name="pcpath.arg" value="PKG_CONFIG_PATH=&quot;${env.PKG_CONFIG_PATH}&quot;"/>
634 <else>
635 <property name="pcpath.arg" value=" "/>
636 </else>
637 </if>
638
639 <if><bool><equals arg1="${os.bin.dir}" arg2="darwin"/></bool>
640 <if><bool><isset property="env.DYLD_LIBRARY_PATH"/></bool>
641 <property name="ldlpath.arg" value="DYLD_LIBRARY_PATH=&quot;${env.DYLD_LIBRARY_PATH}&quot;"/>
642 <else>
643 <property name="ldlpath.arg" value=" "/>
644 </else>
645 </if>
646 <else>
647 <if><bool><isset property="env.LD_LIBRARY_PATH"/></bool>
648 <property name="ldlpath.arg" value="LD_LIBRARY_PATH=&quot;${env.LD_LIBRARY_PATH}&quot;"/>
649 <else>
650 <property name="ldlpath.arg" value=" "/>
651 </else>
652 </if>
653 </else>
654 </if>
655 </else>
656 </if>
657 <property name="allargs" value="${cflags.arg} ${cxxflags.arg} ${cppflags.arg} ${ldflags.arg} ${path.arg} ${ldlpath.arg} ${pcpath.arg}"/>
658
659 <condition property="opt.cross.build"
660 value="--build=${cross.build}" else=" ">
661 <isset property="cross.build"/>
662 </condition>
663
664
665 <condition property="cross.configure.args"
666 value="--host=${cross.host} ${opt.cross.build} CPP=${cross.host}-cpp CC=${cross.host}-gcc CXX=${cross.host}-g++ LD=${cross.host}-ld AR=${cross.host}-ar RANLIB=${cross.host}-ranlib STRIP=${cross.host}-strip ${cross.configure.extraargs} crossOS=${cross.os}" else=" ">
667 <istrue value="${compile.cross}"/>
668 </condition>
669
670 <!-- if we're told to work with gnome-lib, or if there's a gnome-lib-minimal that the user
671 has placed in gs2build/ext, then compile gs2build after sourcing gnome-lib environment -->
672 <condition property="opt.gnomelibext.arg"
673 value="--enable-gnome-lib-ext" else=" ">
674 <or>
675 <available file="${gs2build.home}/ext/gnome-lib-minimal" type="dir"/>
676 <istrue value="${use.gnomelib.ext}"/>
677 <istrue value="${checkout.gnomelib.ext}"/>
678 </or>
679 </condition>
680
681<!-- if you want to disable wvware, do so here: set the value (not else) field to contain minus-minus-disable-wvware -->
682 <condition property="gs2.opt.args" value="${opt.gnomelibext.arg} " else="--disable-mg --disable-mgpp --disable-accentfold --disable-gdbm --disable-sqlite">
683 <istrue value="${with.jni}"/>
684 </condition>
685 <condition property="gs2.compile.target" value="with-jni" else="without-jni">
686 <istrue value="${with.jni}"/>
687 </condition>
688 <condition property="gs2.install.target" value="install-with-jni" else="install-without-jni">
689 <istrue value="${with.jni}"/>
690 </condition>
691 <condition property="gs2.windows.enablejni" value="1" else="0">
692 <istrue value="${with.jni}"/>
693 </condition>
694 <condition property="gs2.windows.enablemg" value="1" else="0">
695 <istrue value="${with.jni}"/>
696 </condition>
697 <condition property="gs2.windows.enablemgpp" value="1" else="0">
698 <istrue value="${with.jni}"/>
699 </condition>
700 <!-- Should accent folding not also be set here ?? -->
701 <condition property="gs2.windows.usegdbm" value="1" else="0">
702 <istrue value="${with.jni}"/>
703 </condition>
704 <condition property="gs2.windows.usesqlite" value="1" else="0">
705 <istrue value="${with.jni}"/>
706 </condition>
707
708 <!-- where is search4j tool -->
709 <condition property="search4j.exec" value="bin/search4j.exe" else="bin/search4j">
710 <isset property="current.os.iswindows"/>
711 </condition>
712
713
714 <!-- ============= Base dirs for each package and component ============ -->
715 <property name="src.gsdl3.home" value="${src.home}/org/greenstone/gsdl3"/>
716 <property name="anttasks.home" value="${src.home}/org/greenstone/anttasks"/>
717 <property name="gli.home" value="${basedir}/gli"/>
718 <property name="javagdbm.home" value="${src.packages.home}/javagdbm"/>
719
720 <condition property="common.src.home" value="${basedir}/common-src" else="${gs2build.home}${file.separator}common-src">
721 <istrue value="${disable.collection.building}"/>
722 </condition>
723
724 <property name="build.src.home" value="${gs2build.home}/build-src"/>
725 <property name="gdbm.home" value="${common.src.home}/packages/gdbm"/>
726 <property name="mg.home" value="${common.src.home}/indexers/mg"/>
727 <property name="mgpp.home" value="${common.src.home}/indexers/mgpp"/>
728 <property name="lucene.home" value="${common.src.home}/indexers/lucene-gs"/>
729
730 <!-- ==================== Compilation Control Options ==================== -->
731
732 <!--
733
734 These properties control option settings on the Javac compiler when it
735 is invoked using the <javac> task.
736
737 compile.debug Should compilation include the debug option?
738
739 compile.deprecation Should compilation include the deprecation option?
740
741 compile.optimize Should compilation include the optimize option?
742
743 -->
744
745 <property name="compile.debug" value="true"/>
746 <property name="compile.deprecation" value="true"/>
747 <property name="compile.optimize" value="true"/>
748 <property name="compile.encoding" value="UTF8"/>
749 <property name="compile.includeantruntime" value="false"/> <!-- to get rid of annoying 'ant' warning -->
750
751 <!--
752
753 Rather than relying on the CLASSPATH environment variable, Ant includes
754 features that makes it easy to dynamically construct the classpath you
755 need for each compilation. The example below constructs the compile
756 classpath to include the servlet.jar file, as well as the other components
757 that Tomcat makes available to web applications automatically, plus anything
758 that you explicitly added.
759
760 -->
761
762 <!-- All elements that Tomcat 5 exposes to applications -->
763 <path id="tomcat5">
764 <pathelement location="${catalina.home}/common/classes"/>
765 <fileset dir="${catalina.home}/common/endorsed">
766 <include name="*.jar"/>
767 </fileset>
768 <fileset dir="${catalina.home}/common/lib">
769 <include name="*.jar"/>
770 </fileset>
771 <!-- seems to be empty, but will leave in just in case some people make use of this to customise their install: -->
772 <pathelement location="${catalina.home}/shared/classes"/>
773 <fileset dir="${catalina.home}/shared/lib">
774 <include name="*.jar"/>
775 </fileset>
776 </path>
777
778 <!-- All elements that Tomcat 7 exposes to applications -->
779 <path id="tomcat7">
780 <fileset dir="${catalina.home}/lib">
781 <include name="*.jar"/>
782 </fileset>
783 </path>
784
785 <path id="compile.classpath">
786 <!-- Include all jar files and libraries in our jni lib directory -->
787 <pathelement location="${lib.jni}"/>
788 <fileset dir="${lib.jni}">
789 <include name="*.jar"/>
790 </fileset>
791 <!-- Include all jar files in our web lib directory -->
792 <pathelement location="${web.lib}"/>
793 <fileset dir="${web.lib}">
794 <include name="*.jar"/>
795 </fileset>
796
797 <pathelement location="${lib.java}"/>
798 <fileset dir="${lib.java}">
799 <include name="*.jar"/>
800 </fileset>
801
802 <!-- include the jar files from the source packages -->
803 <!-- mg and mgpp get installed into lib/jni but they may not be there yet
804 so we add them in by name -->
805 <!-- *** is there any way to make this optional, based on ${with.jni}? -->
806 <pathelement location="${lib.jni}/mg.jar"/>
807 <pathelement location="${lib.jni}/mgpp.jar"/>
808
809 <!-- Include all elements that Tomcat exposes to applications -->
810 <path refid="tomcat${tomcat.version.major}"/>
811
812 </path>
813
814 <path id="local.tomcat.classpath">
815 <!-- explicitly include the jni java wrappers in the classpath -->
816 <pathelement location="${lib.jni}"/>
817 <fileset dir="${lib.jni}">
818 <include name="*.jar"/>
819 </fileset>
820
821 <pathelement location="${web.writablelib}"/>
822 <fileset dir="${web.writablelib}">
823 <include name="derbyclient.jar"/> <!--<include name="derby.jar"/>-->
824 </fileset>
825 </path>
826
827 <path id="derby.server.classpath">
828 <pathelement location="${web.writablelib}/derbynet.jar"/>
829 <pathelement location="${web.writablelib}/derby.jar"/>
830 </path>
831
832
833 <if><bool><isset property="env.PATH"/></bool>
834 <path id="local.tomcat.path">
835 <pathelement location="${basedir}/bin/script"/>
836 <pathelement location="${basedir}/bin"/>
837 <pathelement location="${lib.jni}"/>
838 <pathelement path="${env.PATH}"/>
839 <pathelement path="${wn.home}/bin"/>
840 </path>
841 <!-- Windows can be case sensitive about env.PATH, preferring env.Path. See https://ant.apache.org/manual/Tasks/property.html -->
842 <else><if><bool><isset property="env.Path"/></bool>
843 <path id="local.tomcat.path">
844 <pathelement location="${basedir}/bin/script"/>
845 <pathelement location="${basedir}/bin"/>
846 <pathelement location="${lib.jni}"/>
847 <pathelement path="${env.Path}"/>
848 <pathelement path="${wn.home}/bin"/>
849 </path>
850 <!-- else print error about no path set -->
851 <else>
852 <echo>No env.PATH (or env.Path) set. Unable to set local.tomcat.path property</echo>
853 </else></if></else>
854 </if>
855
856 <target name="test-setup">
857 <echo>ant java version=${ant.java.version}</echo>
858 <echo>is unix : ${current.os.isunix}</echo>
859 <echo>is mac : ${current.os.ismac}</echo>
860 <echo>is unixnotmac : ${current.os.isunixnotmac}</echo>
861 <echo>is windows : ${current.os.iswindows}</echo>
862 <echo>os.unix: ${os.unix}</echo>
863 <echo>env.PATH: ${env.PATH}</echo>
864 <echo>env.Path: ${env.Path}</echo>
865 </target>
866
867 <target name="needs-gs3-setup">
868 <!-- has the gs3-setup script been run?? -->
869 <condition property="gs3-setup-not-done">
870 <not>
871 <isset property="env.GSDL3HOME"/>
872 </not>
873 </condition>
874
875 <fail if="gs3-setup-not-done" message="Please run 'gs3-setup' (Windows) or 'source gs3-setup.sh' (Linux/Mac) before starting the Greenstone server."/>
876 </target>
877
878 <!-- Appends the current env to the file environment.txt. For debugging env vars used by the release-kit. -->
879 <target name="write-env" description="Writes out the environment that this build.xml is executed in to file environment.txt. For debugging.">
880 <echo message="*****************ENVIRONMENT OUTPUT:****************${line.separator}" file="environment.txt" append="true" />
881
882 <if><bool><istrue value="${current.os.iswindows}"/></bool>
883 <exec executable="cmd" dir="${basedir}" failonerror="false" output="environment.txt" append="true">
884 <arg value="/c" />
885 <arg value="set" />
886 </exec>
887 <else>
888 <exec executable="env" dir="${basedir}" failonerror="false" output="environment.txt" append="true" />
889 </else>
890 </if>
891
892 <echo message="${line.separator}" file="environment.txt" append="true" />
893 </target>
894
895
896 <!-- ==================== Primary and Global Targets ============================= -->
897
898 <target name="prepare" depends="accept-properties,init,copy-dot-svn-files,prepare-core,prepare-packages,prepare-common-src,prepare-collection-building,prepare-tomcat,prepare-axis,prepare-web,prepare-collections, prepare-flax"
899 description="Use this when you first checkout the code: 'ant prepare install'. This will do some additional subversion checkouts and downloads, so you need to be online to run this.">
900
901 <!-- make sure .sh files are executable -->
902 <chmod dir="${basedir}" perm="ugo+rx"
903 includes="*.sh"/>
904 <chmod dir="${basedir}/bin/script" perm="ugo+rx"
905 includes="*.sh,*.pl"/>
906 </target>
907
908 <!-- install-common-src and install-collection-building are mutually exclusive and either one or the other will be done depending on whether collection building is enabled or not -->
909 <!--before configuring build-src, make sure that gnome-lib is compiled up-->
910 <target name="install" depends="init,compile-imagemagick,compile-gnome-lib,install-common-src,install-collection-building,install-runtime,install-solr-ext,setup-for-eclipse,get-isisgdl"
911 description="Install Greenstone 3. Use this when you first checkout the code: 'ant prepare new-install'.">
912 <echo>
913 After successful compilation, you can turn on https support on Windows and Linux (requires sudo/admin permissions)
914 by editing build.properties and running 'ant setup-https-cert'.
915 </echo>
916 </target>
917
918 <target name="install-common-src" depends="init"
919 description="Install (configure, compile, install) only the common-src package (shared code from Greenstone 2). " >
920 <antcall target="configure-common-src">
921 <param name="set.ld.path" value="true"/>
922 </antcall>
923 <antcall target="compile-common-src">
924 <param name="set.ld.path" value="true"/>
925 </antcall>
926 <antcall target="install-auxiliary-jar-files"/>
927 <antcall target="install-jni-files"/>
928 </target>
929
930 <target name="install-collection-building" depends="init" if="collection.building.enabled"
931 description="Install (configure, compile, install) the Greenstone 2 collection building package." >
932 <antcall target="configure-collection-building"/>
933 <antcall target="tweak-makefiles" />
934 <antcall target="compile-collection-building"/>
935 </target>
936
937
938 <target name="install-runtime" depends="init,configure,configure-packages,configure-core,compile-web,compile-packages,compile-core,compile-classpath-jars"
939 description="Install (configure, compile, install) the runtime system. Needs either common-src or collection-building to have been installed first." />
940
941 <target name="svnupdate" depends="init,svnupdate-packages,svnupdate-core,svnupdate-common-src,svnupdate-collection-building,svnupdate-web"
942 description="Do a `svn update` for all sources. Doesn't recompile the code. You need to be online to run this."/>
943
944 <target name="configure" depends="init,configure-tomcat,configure-web"
945 description="Configure the installation (not the C++ code). Includes setting up config files. Should be re-run if you change the build.properties file, including if you change the port number."/>
946
947 <target name="clean" depends="init,clean-packages,clean-core,clean-common-src,clean-collection-building,clean-classpath-jars"
948 description="Remove all old compiled code. Includes runtime and collection-building if necessary"/>
949
950 <target name="distclean" depends="init,distclean-packages,clean-core,distclean-common-src,distclean-collection-building,clean-classpath-jars"
951 description="Remove all compiled code and also any Makefiles etc generated during configure-c++. Includes runtime and collection-building as necessary"/>
952
953 <target name="update" depends="init,svnupdate,clean,install"
954 description="Update (thru Subversion) all the source (including common-src or collection-building, and runtime), then clean, and re-install. To do this without any SVN updates, run it like 'ant -Dnosvn.mode=yes update'"/>
955
956
957 <target name="perl-for-building" depends="init">
958 <!-- uses perl.path if set in build.properties, otherwise try for
959 environment variable PERLPATH, and failing that assumes 'perl'
960 is on environment PATH -->
961 <!-- if, outside build.properties, we only set perl.path if we have gs2build/build-src (collection building), then we won't set perl.path in a (flax) binary, since it doesn't have build-src -->
962 <if><bool><available file="${gs2build.home}"/></bool>
963
964 <if><bool><not><isset property="perl.path"/></not></bool>
965
966 <if>
967 <bool>
968 <and>
969 <isset property="env.PERLPATH"/>
970 <not><equals arg1="${env.PERLPATH}" arg2=""/></not>
971 </and>
972 </bool>
973 <!-- set perlpath to env.PERLPATH.
974 This is the path to perl\bin that's found by findperl.bat when the server is launched
975 through GLI instead of the console.
976 For windows, this env.PERLPATH is the bin folder and needs a backslash at end, since it
977 will appear suffixed with "perl.exe" in the perl setting in packages\tomcat\config\web.xml.
978 This web.xml's path to perl is then used to find perl when running the perl scripts in the
979 cgi folder, so without a slash appended at this point it becomes "binperl" in web.xml, and
980 things will break when GLI launches the server on Windows and the online GS3 metadata editor
981 is used to save user-edited metadata. -->
982 <if><bool><istrue value="${current.os.iswindows}"/></bool>
983 <property name="perl.path" value="${env.PERLPATH}\"/>
984 <else>
985 <property name="perl.path" value="${env.PERLPATH}"/>
986 </else>
987 </if>
988
989 <else>
990 <echo>
991 Using PATH environment variable to locate Perl.
992 </echo>
993 <exec executable="which" os="${os.unix}" spawn="false" outputproperty="full.perl.path">
994 <arg value="perl" />
995 </exec>
996
997 <exec executable="${gs2build.home}/bin/windows/which" osfamily="windows" spawn="false" outputproperty="full.perl.path">
998 <arg value="perl" />
999 </exec>
1000
1001 <stringutil string="${full.perl.path}" property="partial.perl.path">
1002 <replace regex="\/[^\/]*$" replacement="/" />
1003 </stringutil>
1004 <stringutil string="${partial.perl.path}" property="perl.path">
1005 <replace regex="\\[^\\]*$" replacement="\\" />
1006 </stringutil>
1007 <if><bool><istrue value="${current.os.isunix}"/></bool>
1008 <if><bool><not><equals arg1="${full.perl.path}" arg2="/usr/bin/perl"/></not></bool>
1009 <echo>
1010 Non-standard location of Perl found: ${full.perl.path}
1011 Set the environment variable PERLPATH or the perl.path property in
1012 build.properties to explicitly control the version of Perl used.
1013 </echo>
1014 </if>
1015 </if>
1016 </else>
1017 </if>
1018 </if>
1019
1020 <!-- full.perl.path is for pretty-printing only, e.g. used in target "start" -->
1021 <if><bool><isset property="perl.path"/></bool>
1022 <property name="full.perl.path" value="${perl.path}${file.separator}perl"/>
1023 <else>
1024 <property name="full.perl.path" value="perl (will use the enviroment variable PATH to find this executable)"/>
1025 </else>
1026 </if>
1027
1028 <!-- gs2build not available, perl.path -->
1029 <else>
1030 <property name="perl.path" value=""/>
1031 </else>
1032 </if>
1033 <stringutil string="${perl.path}" property="escaped.perl.path">
1034 <replace regex="\\" replacement="\\\\" />
1035 </stringutil>
1036 </target>
1037
1038 <target name="get-default-servlet-url">
1039 <echo>${default.server.protocol}://${tomcat.server}:${default.tomcat.port}${app.path}${server.default.servlet}</echo>
1040 </target>
1041
1042 <!-- returns the base local URL, something like HTTP://127.0.0.1:<HTTPport>
1043 or some sane equivalent for 127.0.0.1 -->
1044 <target name="get-local-base-http-url">
1045 <echo>${local.http.url}</echo>
1046 </target>
1047 <!-- Returns something like HTTP://127.0.0.1:<HTTPport>/greenstone3/library -->
1048 <target name="get-local-http-servlet-url">
1049 <echo>${local.http.url}${app.path}${server.default.servlet}</echo>
1050 </target>
1051
1052 <!-- solr should only be accessible locally, which therefore also means only over http.
1053 Note that for http, 127.0.0.1 is safer than localhost (as localhost can be mapped to something
1054 other than 127.0.0.1). See also https://letsencrypt.org/docs/certificates-for-localhost/ -->
1055 <target name="get-solr-servlet-url">
1056 <!--<echo>${default.server.protocol}://${tomcat.server}:${default.tomcat.port}/${solr.context}</echo>-->
1057 <echo>${local.http.url}/${solr.context}</echo>
1058 </target>
1059
1060 <target name="check-derbyserver-running">
1061 <condition property="derby.isrunning" value="true" else="false">
1062 <!--<socket server="jdbc:derby://${derby.server}" port="${derby.server.port}"/>-->
1063 <socket server="${derby.server}" port="${derby.server.port}"/><!-- like telnet machine port -->
1064 </condition>
1065 <echo>Derby is running: ${derby.isrunning}</echo>
1066 </target>
1067
1068 <!-- Need a copy of the check-derby-running target with a distinct property, because ant restart runs
1069 both stop and start, which stop and start derby respectively. Both need check the derby socket.
1070 Because each property can be set only once during an invocation with ant, ant restart will need
1071 two check-derbyserver properties, one for each derby check. -->
1072 <target name="check-derbyserver-started">
1073 <condition property="derby.isstarted" value="true" else="false">
1074 <socket server="${derby.server}" port="${derby.server.port}"/>
1075 </condition>
1076 <echo>Derby is running: ${derby.isstarted}</echo>
1077 </target>
1078
1079
1080 <!-- Unused -->
1081 <target name="start-derby-java" depends="check-derbyserver-running">
1082 <if><bool><not><istrue value="${derby.isrunning}"/></not></bool>
1083 <echo>Launching derby on ${derby.server}:${derby.server.port}...</echo>
1084 <java classname="org.apache.derby.drda.NetworkServerControl" fork="true" spawn="true" clonevm="true">
1085 <arg value="start"/>
1086 <classpath refid="derby.server.classpath"/>
1087 </java>
1088 <else>
1089 <echo>Derby server ALREADY RUNNING on ${derby.server}:${derby.server.port}</echo>
1090 </else>
1091 </if>
1092 </target>
1093
1094 <target name="start-derby" depends="check-derbyserver-started">
1095 <if><bool><not><istrue value="${derby.isstarted}"/></not></bool>
1096 <echo>About to launch derby on ${derby.server}:${derby.server.port}</echo>
1097 <antcall target="force-start-derby"/>
1098 <else>
1099 <echo>Derby networked server ALREADY RUNNING on ${derby.server}:${derby.server.port}</echo>
1100 </else>
1101 </if>
1102 </target>
1103
1104 <!-- Using derby 10.1.2.1
1105 See db-derby-10.1.2.1-bin/docs/html/adminguide/index.html -->
1106 <target name="force-start-derby">
1107 <property name="derby.server.classpath.prop" refid="derby.server.classpath" />
1108
1109 <exec executable="java" spawn="true"><!-- failonerror="true"-->
1110 <env key="CLASSPATH" path="${derby.server.classpath.prop}"/>
1111 <arg value="org.apache.derby.drda.NetworkServerControl"/>
1112 <arg value="start"/>
1113 <arg value="-p"/>
1114 <arg value="${derby.server.port}"/>
1115 </exec>
1116
1117 </target>
1118
1119 <target name="force-stop-derby">
1120 <java classname="org.apache.derby.drda.NetworkServerControl">
1121 <arg value="shutdown"/>
1122 <arg value="-p"/>
1123 <arg value="${derby.server.port}"/>
1124 <classpath refid="derby.server.classpath"/>
1125 </java>
1126 </target>
1127
1128 <target name="stop-derby" description="Shutdown derby server only if running" depends="check-derbyserver-running"><!-- if="${derby.isrunning}" checks if true or false only from ant 1.8 on -->
1129 <if><bool><istrue value="${derby.isrunning}"/></bool>
1130 <!--<echo>Derby is |${derby.isrunning}| running</echo>-->
1131 <antcall target="force-stop-derby"/>
1132 <else>
1133 <echo>Derby is not running</echo>
1134 </else>
1135 </if>
1136 </target>
1137
1138 <target name="start" depends="needs-gs3-setup,init,configure-tomcat,configure-web,configure-solr-ext,start-derby,start-tomcat"
1139 description="Startup the Tomcat server." >
1140 <echo>${app.name} (${app.version}) server running using Apache Tomcat and Java</echo>
1141 <echo>Tomcat: ${catalina.home}</echo>
1142 <echo>Java : ${java.home}</echo>
1143 <if><bool><available file="${build.src.home}"/></bool>
1144 <echo>Perl : ${full.perl.path}</echo>
1145 </if>
1146 <if><bool><isset property="install.flax"/></bool>
1147 <property name="url" value="${default.server.protocol}://${tomcat.server}:${default.tomcat.port}${app.path}/flax"/>
1148 <else>
1149 <property name="url" value="${default.server.protocol}://${tomcat.server}:${default.tomcat.port}${app.path}/"/>
1150 </else>
1151 </if>
1152 <echo>URL : ${url}</echo>
1153 <!-- assuming that index.html is not needed here -->
1154
1155 <!--Now write out the url with oaiserver suffix as the baseURL property in OAIConfig.xml-->
1156 <available file="${basedir}/resources/oai/OAIConfig.xml.in" property="oaiconfig.present"/>
1157 <antcall target="init-oaiconfig">
1158 <param name="url" value="${url}"/>
1159 </antcall>
1160 </target>
1161
1162 <target name="init-oaiconfig" if="oaiconfig.present">
1163 <echo>Writing out baseURL ${url}oaiserver to ${web.writableclasses}/OAIConfig.xml</echo>
1164 <copy file="${basedir}/resources/oai/OAIConfig.xml.in" tofile="${web.writableclasses}/OAIConfig.xml"/>
1165 <rsr verbosity="1" file="${web.writableclasses}/OAIConfig.xml" pattern="&lt;baseURL&gt;.*&lt;/baseURL&gt;" replacement="&lt;baseURL&gt;${url}oaiserver&lt;/baseURL&gt;" />
1166 </target>
1167
1168 <target name="stop" depends="init,stop-tomcat,stop-derby"
1169 description="Shutdown the Tomcat server."/>
1170
1171 <target name="restart" description="Shutdown and restart Tomcat" depends="init,stop,start"/>
1172
1173 <!-- =========== Help targets =================================== -->
1174
1175 <property name="install-command" value="ant [options] prepare install"/>
1176
1177 <target name="usage" description="Print a help message">
1178 <echo message=" Execute 'ant -projecthelp' for a list of targets."/>
1179 <echo message=" Execute 'ant -help' for Ant help."/>
1180 <echo>
1181 To install Greenstone3, run '${install-command}'.
1182 There are properties defined in build.properties. The install
1183 process will ask you if these properties are set correctly.
1184 To avoid this prompt, use the '-Dproperties.accepted=yes'
1185 option.
1186 To log the output, use the '-logfile build.log' option.
1187 The README.txt file has more information about the ant targets
1188 and install process.
1189 </echo>
1190 </target>
1191
1192 <target name="help" depends="usage" description="Print a help message"/>
1193
1194 <target name="debug" depends="init" description="Display all the currently used properties">
1195 <echoproperties/>
1196 </target>
1197
1198 <!-- ====== initialization and setup targets ================== -->
1199
1200 <target name="accept-properties" unless="properties.accepted">
1201 <input addproperty="properties.ok" validargs="y,n">The following properties (among others) are being used from a build.properties file found in this directory:
1202 server.protocols=${server.protocols}
1203 tomcat.server=${tomcat.server}
1204 tomcat.port.https=${tomcat.port.https}
1205 localhost.port.http=${localhost.port.http}
1206
1207 default.server.protocol=${default.server.protocol}
1208 default.tomcat.port=${default.tomcat.port}
1209 Local base HTTP URL used by Greenstone: ${local.http.url}
1210
1211 tomcat.installed.path=${tomcat.installed.path} (this is the location of Tomcat's base dir if it is already installed)
1212 proxy.host=${proxy.host}
1213 proxy.port=${proxy.port}
1214 disable.collection.building=${disable.collection.building}
1215 If these are not acceptable, please change them and rerun this target. Continue [y/n]?
1216 </input>
1217 <condition property="do.abort">
1218 <equals arg1="n" arg2="${properties.ok}"/>
1219 </condition>
1220 <fail if="do.abort">Build aborted by user. Please change your properties settings and re-run the target</fail>
1221 </target>
1222
1223 <!-- this sets up some initial properties -->
1224 <target name="init">
1225
1226 <condition property="java.too.old">
1227 <or>
1228 <equals arg1="1.1" arg2="${ant.java.version}"/>
1229 <equals arg1="1.2" arg2="${ant.java.version}"/>
1230 <equals arg1="1.3" arg2="${ant.java.version}"/>
1231 </or>
1232 </condition>
1233 <fail if="java.too.old" message="You need Java 1.4 or greater to run Greenstone 3"/>
1234
1235 <available file="${basedir}/gli" property="gli.present"/>
1236 <available file="${basedir}/common-src" property="common.src.present"/>
1237 <available file="${basedir}/gs2build" property="gs2build.present"/>
1238 <available file="${gnome-lib-dir}" property="gnome-lib.present"/>
1239
1240 <condition property="tomcat.islocal">
1241 <or>
1242 <not><isset property="tomcat.installed.path"/></not>
1243 <equals arg1="" arg2="${tomcat.installed.path}"/>
1244 </or>
1245 </condition>
1246
1247 <condition property="proxy.present">
1248 <and>
1249 <isset property="proxy.host"/>
1250 <not><equals arg1="" arg2="${proxy.host}"/></not>
1251 </and>
1252 </condition>
1253
1254 <!--
1255 the next block checks if the bundled tomcat is present in the 'packages' directory,
1256 and checks for the lethal combination of tomcat 7 and java 1.4. Test for
1257 tomcat6 is based on the presence of a file inserted by greenstone into the tomcat6
1258 download, as there is no other surefire way to check tomcat version under java 1.4
1259 -->
1260 <condition property="packages.tomcat.ispresent" value="true" else="false">
1261 <available file="packages/tomcat"/>
1262 </condition>
1263 <condition property="packages.tomcat.istomcat7" value="true" else="false">
1264 <available file="packages/tomcat/tomcat7.txt"/>
1265 </condition>
1266 <if>
1267 <bool>
1268 <and>
1269 <istrue value="${packages.tomcat.ispresent}"/>
1270 <istrue value="${packages.tomcat.istomcat7}"/>
1271 <equals arg1="1.4" arg2="${ant.java.version}"/>
1272 </and>
1273 </bool>
1274 <fail>Your Java (version 1.4) is too old to work with the bundled Apache Tomcat (version 6). Please upgrade to Java version 1.5 or greater. Alternatively, you may remove the bundled Apache Tomcat from the 'packages' folder and then run 'ant prepare-tomcat'.</fail>
1275 </if>
1276
1277 </target>
1278
1279 <target name="setup-proxy" depends="init" if="proxy.present">
1280 <condition property="ask.user">
1281 <or>
1282 <equals arg1="" arg2="${proxy.user}"/>
1283 <equals arg1="" arg2="${proxy.password}"/>
1284 </or>
1285 </condition>
1286
1287 <getuserandpassword message="Using proxy: ${proxy.host}:${proxy.port}" if="ask.user" username="${proxy.user}" userproperty="proxy.username" pwordproperty="proxy.password"/>
1288 <mysetproxy proxyhost="${proxy.host}" proxyport="${proxy.port}" proxyuser="${proxy.username}" proxypassword="${proxy.password}"/>
1289 </target>
1290
1291 <target name="copy-dot-svn-files" depends="init"
1292 description="Copies all resources .svn files to .in versions - which are used during configure to generate the runtime versions." >
1293 <if><bool><available file="${basedir}/resources/tomcat/greenstone3.xml.in"/></bool>
1294 <copy file="${basedir}/resources/tomcat/greenstone3.xml.in" tofile="${basedir}/resources/tomcat/greenstone3.xml.in.backup" overwrite="true"/>
1295 </if>
1296
1297 <copy file="${basedir}/resources/tomcat/greenstone3.xml.svn" tofile="${basedir}/resources/tomcat/greenstone3.xml.in" overwrite="true"/>
1298 <if><bool><available file="${basedir}/resources/tomcat/server_tomcat5.xml.in"/></bool>
1299 <copy file="${basedir}/resources/tomcat/server_tomcat5.xml.in" tofile="${basedir}/resources/tomcat/server_tomcat5.xml.in.backup" overwrite="true"/>
1300 </if>
1301 <copy file="${basedir}/resources/tomcat/server_tomcat5.xml.svn" tofile="${basedir}/resources/tomcat/server_tomcat5.xml.in" overwrite="true"/>
1302 <if><bool><available file="${basedir}/resources/tomcat/server_tomcat7.xml.in"/></bool>
1303 <copy file="${basedir}/resources/tomcat/server_tomcat7.xml.in" tofile="${basedir}/resources/tomcat/server_tomcat7.xml.in.backup" overwrite="true"/>
1304 </if>
1305 <copy file="${basedir}/resources/tomcat/server_tomcat7.xml.svn" tofile="${basedir}/resources/tomcat/server_tomcat7.xml.in" overwrite="true"/>
1306 <if><bool><available file="${basedir}/resources/tomcat/web.xml.in"/></bool>
1307 <copy file="${basedir}/resources/tomcat/web.xml.in" tofile="${basedir}/resources/tomcat/web.xml.in.backup" overwrite="true"/>
1308 </if>
1309 <copy file="${basedir}/resources/tomcat/web.xml.svn" tofile="${basedir}/resources/tomcat/web.xml.in" overwrite="true"/>
1310 <if><bool><available file="${basedir}/resources/oai/OAIConfig.xml.in"/></bool>
1311 <copy file="${basedir}/resources/oai/OAIConfig.xml.in" tofile="${basedir}/resources/oai/OAIConfig.xml.in.backup" overwrite="true"/>
1312 </if>
1313 <copy file="${basedir}/resources/oai/OAIConfig.xml.svn" tofile="${basedir}/resources/oai/OAIConfig.xml.in" overwrite="true"/>
1314 <if><bool><available file="${basedir}/resources/cgi/gsdl3site.cfg.in"/></bool>
1315 <copy file="${basedir}/resources/cgi/gsdl3site.cfg.in" tofile="${basedir}/resources/cgi/gsdl3site.cfg.in.backup" overwrite="true"/>
1316 </if>
1317 <copy file="${basedir}/resources/cgi/gsdl3site.cfg.svn" tofile="${basedir}/resources/cgi/gsdl3site.cfg.in" overwrite="true"/>
1318 <if><bool><available file="${basedir}/resources/web/global.properties.in"/></bool>
1319 <copy file="${basedir}/resources/web/global.properties.in" tofile="${basedir}/resources/web/global.properties.in.backup" overwrite="true"/>
1320 </if>
1321 <copy file="${basedir}/resources/web/global.properties.svn" tofile="${basedir}/resources/web/global.properties.in" overwrite="true"/>
1322 <if><bool><available file="${basedir}/resources/web/log4j.properties.in"/></bool>
1323 <copy file="${basedir}/resources/web/log4j.properties.in" tofile="${basedir}/resources/web/log4j.properties.in.backup" overwrite="true"/>
1324 </if>
1325 <copy file="${basedir}/resources/web/log4j.properties.svn" tofile="${basedir}/resources/web/log4j.properties.in" overwrite="true"/>
1326 </target>
1327
1328 <!-- ========== Web app Targets ================================ -->
1329
1330 <target name="prepare-web" depends="init">
1331 <mkdir dir="${web.writablehome}/applet"/>
1332 <mkdir dir="${web.writablehome}/logs"/>
1333 <mkdir dir="${web.writablehome}/logs/tmp"/>
1334 </target>
1335
1336 <!-- if we are using java 1.5+, we need the xalan.jar file in web/WEB-INF/lib, but if we are using java 1.4, we can't have it there.
1337 The test for whether we need it assumes we won't be trying to compile GS3 against Java versions less than 1.4. -->
1338 <target name="configure-java-version" depends="init"
1339 description="Activates or deactivates some jar libraries as needed depending on your java version">
1340
1341 <available property="have.xalan.jar" file="${web.lib}/xalan.jar"/>
1342 <condition property="need.xalan.jar">
1343 <or>
1344 <not><equals arg1="1.4" arg2="${ant.java.version}"/></not>
1345 </or>
1346 </condition>
1347
1348 <!-- if they have xalan.jar but dont need it -->
1349 <if>
1350 <bool>
1351 <and>
1352 <isset property="have.xalan.jar"/>
1353 <not><isset property="need.xalan.jar"/></not>
1354 </and>
1355 </bool>
1356 <antcall target="deactivate-xalan-jar"/>
1357 </if>
1358
1359 <!-- if they need xalan.jar but dont have it -->
1360 <if>
1361 <bool>
1362 <and>
1363 <not><isset property="have.xalan.jar"/></not>
1364 <isset property="need.xalan.jar"/>
1365 </and>
1366 </bool>
1367 <antcall target="activate-xalan-jar"/>
1368 </if>
1369
1370 </target>
1371
1372 <target name="activate-xalan-jar">
1373 <echo>activating xalan.jar</echo>
1374 <copy file="${web.lib}/xalan.jar.tmp" tofile="${web.lib}/xalan.jar"/>
1375 <if>
1376 <bool>
1377 <and>
1378 <isset property="current.os.ismac"/>
1379 <available file="${catalina.home}/common/endorsed" type="dir"/>
1380 </and>
1381 </bool>
1382 <copy file="${web.lib}/xalan.jar.tmp" tofile="${catalina.home}/common/endorsed/xalan.jar"/>
1383 </if>
1384 </target>
1385
1386 <target name="deactivate-xalan-jar">
1387 <echo>deactivating xalan.jar</echo>
1388 <delete file="${web.lib}/xalan.jar"/>
1389 <!-- should we be deleting common/endorsed/xalan.jar on mac?? -->
1390 </target>
1391
1392
1393 <target name="prepare-collections" depends="init"
1394 description="Unpack all the collections from their svn zipped versions">
1395 <property name="collect.dir" value="${web.home}/sites/localsite/collect"/>
1396 <property name="index-and-archives.zip" value="index-and-archives.zip"/>
1397
1398 <echo message="installing collections..."/>
1399 <antcall target="gs2mgdemo-install"/>
1400 <antcall target="gs2mgppdemo-install"/>
1401 <antcall target="gberg-install"/>
1402 <antcall target="lucene-jdbm-demo-install"/>
1403 </target>
1404
1405 <target name="gs2mgdemo-prepare" if="collect.dir">
1406 <property name="gs2mgdemo.dir" value="${collect.dir}/gs2mgdemo"/>
1407
1408 <condition property="gs2mgdemo.present">
1409 <and>
1410 <available file="${gs2mgdemo.dir}/${index-and-archives.zip}"/>
1411 </and>
1412 </condition>
1413 </target>
1414
1415 <target name="gs2mgdemo-install" if="gs2mgdemo.present" depends="gs2mgdemo-prepare">
1416 <unzip dest="${gs2mgdemo.dir}" src="${gs2mgdemo.dir}/${index-and-archives.zip}" />
1417 <echo>collection gs2mgdemo installed</echo>
1418 </target>
1419
1420 <target name="gs2mgppdemo-prepare" if="collect.dir">
1421 <property name="gs2mgppdemo.dir" value="${collect.dir}/gs2mgppdemo"/>
1422
1423 <condition property="gs2mgppdemo.present">
1424 <and>
1425 <available file="${gs2mgppdemo.dir}/${index-and-archives.zip}"/>
1426 </and>
1427 </condition>
1428 </target>
1429
1430 <target name="gs2mgppdemo-install" if="gs2mgppdemo.present" depends="gs2mgppdemo-prepare">
1431 <unzip dest="${gs2mgppdemo.dir}" src="${gs2mgppdemo.dir}/${index-and-archives.zip}" />
1432 <echo>collection gs2mgppdemo installed</echo>
1433 </target>
1434
1435 <target name="gberg-prepare" if="collect.dir">
1436 <property name="gberg.dir" value="${collect.dir}/gberg"/>
1437 <available file="${gberg.dir}/index/index.zip" property="gberg.present"/>
1438 </target>
1439
1440 <target name="gberg-install" if="gberg.present" depends="gberg-prepare">
1441 <unzip dest="${gberg.dir}/index" src="${gberg.dir}/index/index.zip"/>
1442 <echo>collection gberg installed</echo>
1443 </target>
1444
1445 <target name="lucene-jdbm-demo-prepare" if="collect.dir">
1446 <property name="lucene-jdbm-demo.dir" value="${collect.dir}/lucene-jdbm-demo"/>
1447 <available file="${lucene-jdbm-demo.dir}/${index-and-archives.zip}" property="lucene-jdbm-demo.present"/>
1448 </target>
1449
1450 <target name="lucene-jdbm-demo-install" if="lucene-jdbm-demo.present" depends="lucene-jdbm-demo-prepare">
1451 <unzip dest="${lucene-jdbm-demo.dir}" src="${lucene-jdbm-demo.dir}/${index-and-archives.zip}"/>
1452 <echo>collection lucene-jdbm-demo installed</echo>
1453 </target>
1454
1455
1456 <target name="install-solr-ext" depends="init" >
1457 <exec executable="ant.bat" osfamily="windows" dir="${solr-ext.home}" spawn="false">
1458 <arg value="add-service"/>
1459 </exec>
1460 <exec executable="ant" os="${os.unix}" dir="${solr-ext.home}" spawn="false">
1461 <arg value="add-service"/>
1462 </exec>
1463 <antcall target="solr-jdbm-demo-install"/>
1464 </target>
1465
1466 <target name="solr-jdbm-demo-prepare" if="collect.dir">
1467 <property name="solr-jdbm-demo.dir" value="${collect.dir}/solr-jdbm-demo"/>
1468 <available file="${solr-jdbm-demo.dir}/${index.zip}" property="solr-jdbm-demo.present"/>
1469 </target>
1470
1471 <target name="solr-jdbm-demo-install" if="solr-jdbm-demo.present" depends="solr-jdbm-demo-prepare">
1472 <unzip dest="${solr-jdbm-demo.dir}" src="${solr-jdbm-demo.dir}/${index.zip}"/>
1473 <echo>collection solr-jdbm-demo installed</echo>
1474 </target>
1475
1476 <!-- Until 64 bit Linux and Mac (Lion) machines can generate a working IsisGdl,
1477 use the ones generated on a 32 bit Linux and Mac (Leopard), respectively -->
1478 <target name="get-isisgdl" if="${current.os.isunix}">
1479 <exec executable="uname" dir="${basedir}" failonerror="false"
1480 outputproperty="uname.val">
1481 <arg value="-m"/>
1482 </exec>
1483
1484 <if><bool><equals arg1="${uname.val}" arg2="x86_64"/></bool>
1485 <echo>Bitness: ${uname.val}</echo>
1486 <if><bool><contains string="${os.bin.dir}" substring="darwin" casesensitive="false"/></bool>
1487 <get src="http://www.greenstone.org/caveat-emptor/IsisGdl.macleopard"
1488 dest="${basedir}/gs2build/bin/${os.bin.dir}/IsisGdl"/>
1489 </if>
1490 <if><bool><contains string="${os.bin.dir}" substring="linux" casesensitive="false"/></bool>
1491 <get src="http://www.greenstone.org/caveat-emptor/IsisGdl.bin32"
1492 dest="${basedir}/gs2build/bin/${os.bin.dir}/IsisGdl"/>
1493 </if>
1494 <chmod file="${basedir}/gs2build/bin/${os.bin.dir}/IsisGdl" perm="755"/>
1495 </if>
1496 </target>
1497
1498 <target name="set-perl-shebangs" depends="perl-for-building">
1499 <if>
1500 <bool>
1501 <and><isset property="perl.path"/>
1502 <not><equals arg1="${perl.path}" arg2=""/></not>
1503 </and>
1504 </bool>
1505
1506 <if><bool><istrue value="${current.os.iswindows}"/></bool>
1507 <property name="perl.exec" value="${perl.path}perl.exe"/>
1508 <else>
1509 <property name="perl.exec" value="${perl.path}perl"/>
1510 </else>
1511 </if>
1512
1513 <!--<echo>**** PERLPATH: ${perl.path}</echo>-->
1514 <echo>Setting perl shebangs to Perl Exec: ${perl.exec}</echo>
1515
1516 <!-- set the shebangs in the cgi files to point to the correct perlpath -->
1517 <if>
1518 <bool><not><equals arg1="${web.home}" arg2="${web.writablehome}"></equals></not></bool>
1519 <mkdir dir="${web.writablehome}"/>
1520 <copy file="${full.web.dir}/WEB-INF/cgi/gliserver.pl" tofile="${web.writablehome}/WEB-INF/cgi/gliserver.pl" overwrite="true"/>
1521 <copy file="${full.web.dir}/WEB-INF/cgi/metadata-server.pl" tofile="${web.writablehome}/WEB-INF/cgi/metadata-server.pl" overwrite="true"/>
1522 <copy file="${full.web.dir}/WEB-INF/cgi/checksum.pl" tofile="${web.writablehome}/WEB-INF/cgi/checksum.pl" overwrite="true"/>
1523 </if>
1524
1525 <rsr verbosity="1" file="${web.writablehome}/WEB-INF/cgi/gliserver.pl" pattern="^#!.*" replacement="#!${perl.exec} -w" lines="1"/>
1526 <rsr verbosity="1" file="${web.writablehome}/WEB-INF/cgi/metadata-server.pl" pattern="^#!.*" replacement="#!${perl.exec} -w" lines="1"/>
1527 <rsr verbosity="1" file="${web.writablehome}/WEB-INF/cgi/checksum.pl" pattern="^#!.*" replacement="#!${perl.exec} -w" lines="1"/>
1528 <else>
1529 <echo>WARNING: perl.path is empty. Unable to set the shebangs in the perl files in ${web.writablehome}/WEB-INF/cgi</echo>
1530 </else>
1531 </if>
1532 </target>
1533
1534 <target name="configure-web" depends="init,perl-for-building"
1535 description="Configure only the web app config files">
1536 <!-- we want a unix path in the global.properties file -->
1537 <pathconvert targetos="unix" property="src.gsdl3.home.unix">
1538 <path path="${web.home}"/>
1539 </pathconvert>
1540 <pathconvert targetos="unix" property="src.gsdl3.writablehome.unix">
1541 <path path="${web.writablehome}"/>
1542 </pathconvert>
1543
1544 <antcall target="set-perl-shebangs" inheritAll="true" />
1545
1546 <filter token="gsdlhome" value="${gs2build.home}"/>
1547 <filter token="gsdlhomequoted" value="&quot;${gs2build.home}&quot;"/>
1548 <filter token="gsdl3srchome" value="${basedir}"/>
1549 <filter token="gsdl3srchomequoted" value="&quot;${basedir}&quot;"/>
1550 <filter token="gsdl3home" value="${src.gsdl3.home.unix}"/>
1551 <filter token="gsdl3homequoted" value="&quot;${src.gsdl3.home.unix}&quot;"/>
1552 <filter token="gsdl3writablehome" value="${src.gsdl3.writablehome.unix}"/>
1553 <filter token="gsdl3version" value="${app.version}"/>
1554 <filter token="server.protocols" value="${server.protocols}"/>
1555 <filter token="default.server.protocol" value="${default.server.protocol}"/>
1556 <filter token="tomcat.server" value="${tomcat.server}"/>
1557 <filter token="default.tomcat.port" value="${default.tomcat.port}"/>
1558 <filter token="localhost.server.http" value="${localhost.server.http}"/>
1559 <filter token="localhost.port.http" value="${localhost.port.http}"/>
1560 <filter token="tomcat.port.https" value="${tomcat.port.https}"/>
1561 <filter token="restrict.http.to.local" value="${restrict.http.to.local}"/>
1562 <filter token="greenstone.context" value="${greenstone.context}"/>
1563 <filter token="solr.context" value="${solr.context}"/>
1564 <filter token="derbyserver" value="${derby.server}"/>
1565 <filter token="derbyserver.port" value="${derby.server.port}"/>
1566 <filter token="perlpath" value="${escaped.perl.path}"/>
1567 <filter token="disable.collection.building" value="${disable.collection.building}"/>
1568 <copy file="${basedir}/resources/cgi/gsdl3site.cfg.in" tofile="${web.writablehome}/WEB-INF/cgi/gsdl3site.cfg" filtering="true" overwrite="true"/>
1569 <copy file="${basedir}/resources/web/global.properties.in" tofile="${web.writableclasses}/global.properties" filtering="true" overwrite="true"/>
1570 <copy file="${basedir}/resources/web/log4j.properties.in" tofile="${web.writableclasses}/log4j.properties" filtering="true" overwrite="true"/>
1571 <if><bool><istrue value="${gsdl3home.isreadonly}"/></bool>
1572 <!-- uncomment the writablehome properties -->
1573 <rsr verbosity="1" file="${web.writableclasses}/global.properties" pattern="^#gsdl3\.(writable{1})?home" replacement="gsdl3.$1home" />
1574 </if>
1575 <chmod file="${web.writableclasses}/global.properties" perm="644"/>
1576 <chmod file="${web.writableclasses}/log4j.properties" perm="644"/>
1577 </target>
1578
1579 <target name="compile-web" depends="init">
1580 <javac srcdir="${web.classes}"
1581 destdir="${web.classes}"
1582 includeantruntime="${compile.includeantruntime}"
1583 debug="${compile.debug}"
1584 deprecation="${compile.deprecation}"
1585 optimize="${compile.optimize}"
1586 encoding="${compile.encoding}">
1587 <classpath><path refid="compile.classpath"/></classpath>
1588 </javac>
1589 </target>
1590
1591 <target name="compile-classpath-jars" depends="init">
1592 <if><bool><available file="admin/cp.mf"/></bool>
1593 <jar destfile="admin/cp.jar" manifest="admin/cp.mf"/>
1594 </if>
1595 <if><bool><available file="${lib.java}/cp.mf"/></bool>
1596 <jar destfile="${lib.java}/cp.jar" manifest="${lib.java}/cp.mf"/>
1597 </if>
1598 <if><bool><available file="${lib.jni}/cp.mf"/></bool>
1599 <jar destfile="${lib.jni}/cp.jar" manifest="${lib.jni}/cp.mf"/>
1600 </if>
1601 <if><bool><available file="${web.lib}/cp.mf"/></bool>
1602 <jar destfile="${web.lib}/cp.jar" manifest="${web.lib}/cp.mf"/>
1603 </if>
1604 <jar destfile="cp.jar">
1605 <manifest>
1606 <attribute name="Class-Path" value="server.jar admin/cp.jar lib/java/cp.jar lib/jni/cp.jar web/WEB-INF/lib/cp.jar"/>
1607 </manifest>
1608 </jar>
1609 </target>
1610
1611 <target name="clean-classpath-jars" depends="init">
1612 <delete file="admin/cp.jar"/>
1613 <delete file="${lib.java}/cp.jar"/>
1614 <delete file="${lib.jni}/cp.jar"/>
1615 <delete file="${web.lib}/cp.jar"/>
1616 <delete file="cp.jar"/>
1617 </target>
1618
1619
1620 <target name="svnupdate-web" unless="nosvn.mode">
1621 <exec executable="svn">
1622 <arg value="update"/>
1623 <arg value="${web.writablehome}"/>
1624 <arg value="-r"/><arg value="${branch.revision}"/>
1625 </exec>
1626 </target>
1627
1628 <target name="update-web" depends="init,svnupdate-web,configure-web"
1629 description="update only the web stuff (config files)"/>
1630
1631 <!-- ============ Targets concerned with https certification ================ -->
1632
1633 <target name="check-os-for-https-cert-support">
1634 <if><bool><isset property="current.os.ismac"/></bool>
1635 <fail>
1636 Features that automate generating, removing and renewing HTTPS certificates
1637 are currently not supported on Macs, only on other Unix systems and on Windows.
1638 </fail>
1639 </if>
1640 </target>
1641
1642
1643 <target name="setup-https-cert-info">
1644 <echo>
1645 *********************************************************************
1646 NOTE TO OBTAINING A TLS (SSL) CERTIFICATE FOR HTTPS
1647 *********************************************************************
1648 A certificate is needed for your GS server to serve pages over https.
1649 This target will attempt to obtain a certificate for you from the official and free Certificate Authority Let's Encrypt.
1650 However, a certificate can only be obtained if you have sudo permissions on this machine that you're installing Greenstone on.
1651
1652 Note that:
1653 * if you already have a certificate, then you probably don't want to be running this target but the 'ant renew-existing-https-cert' target instead, to renew your existing certificate.
1654 * if you run this target when you already have a generated certificate, the existing certificate will remain unchanged and the script will terminate with a message alerting you to this fact.
1655 </echo>
1656 </target>
1657
1658
1659 <target name="https-conditions-set">
1660 <input addproperty="https.conditions.ok" validargs="y,n">
1661 To run this target, ensure you have:
1662 * (if on unix) sudo permissions. Enter the sudo password if prompted.
1663 * (if on windows) sufficient privileges to run the included tomcat on port 80.
1664 * nothing running on port 80 when you run this target
1665 * edited the build.properties file with
1666 - tomcat.server set to the/a domain name of your server
1667 - server.protocols list set to contain at least 'https' if not also http (the first in this comma-separated list will be the default protocol)
1668 - tomcat.port.https set to a valid port number not yet in use
1669 - keystore.pass set to a password for the certification process
1670 * read the Let's Encrypt Subscriber Agreement at https://letsencrypt.org/repository/
1671 If any of the above is not possible, quit this target. Continue [y/n]?
1672 </input>
1673
1674 <condition property="quit.https.setup">
1675 <equals arg1="n" arg2="${https.conditions.ok}"/>
1676 </condition>
1677
1678 <fail if="quit.https.setup">https certification step aborted by user. Please edit build.properties to set server.protocol=http and comment out tomcat.port.https.</fail>
1679 </target>
1680
1681
1682 <target name="setup-https-cert" depends="check-os-for-https-cert-support,setup-https-cert-info,https-conditions-set">
1683 <input addproperty="https.cert.email">Enter an email that Let's Encrypt, the certification authority, can send any important notifications to</input>
1684 <input addproperty="https.other.domains">Besides tomcat.server=${tomcat.server}, enter a comma separated list of additional domains to support, if any</input>
1685 <input addproperty="https.cert.agree" validargs="y,n">You've read the Let's Encrypt Subscriber Agreement at https://letsencrypt.org/repository/ and agree</input>
1686 <if>
1687 <bool><equals arg1="y" arg2="${https.cert.agree}"/></bool>
1688
1689 <condition property="https.cert.domains" value="${tomcat.server},${https.other.domains}" else="${tomcat.server}">
1690 <and>
1691 <isset property="https.other.domains" />
1692 <not><matches string="${https.other.domains}" pattern="^\s*$"/></not>
1693 </and>
1694 </condition>
1695
1696 <input addproperty="https.do.cert" validargs="y,n">
1697 You've agreed to the Let's Encrypt TOS with
1698 - email: ${https.cert.email}
1699 - domains: ${https.cert.domains}
1700 Looks okay? [y/n]
1701 </input>
1702 </if>
1703
1704 <if><bool><equals arg1="n" arg2="${https.do.cert}"/></bool>
1705 <echo>Not proceeding with https certification for the Greenstone 3 web server</echo>
1706 <else>
1707 <echo>Proceeding...</echo>
1708 <if><bool><istrue value="${current.os.iswindows}"/></bool>
1709 <antcall target="setup-https-cert-windows">
1710 <param name="https.cert.renewal" value=""/><!-- for cert issuance, there are none of the additional parameters specific to cert renewal -->
1711 </antcall>
1712 </if>
1713 <if><bool><istrue value="${current.os.isunixnotmac}"/></bool>
1714 <antcall target="setup-https-cert-linux"/>
1715 </if>
1716 </else>
1717 </if>
1718
1719 </target>
1720
1721
1722 <target name="setup-https-cert-windows">
1723
1724 <echo>********** The included tomcat will be stopped, then restarted on port 80 and stopped again</echo>
1725
1726 <!-- create folder packages\tomcat\webapps\ROOT\.well-known\acme-challenge -->
1727 <mkdir dir="${packages.home}/tomcat/webapps/ROOT/.well-known/acme-challenge"/>
1728 <mkdir dir="${packages.home}/tomcat/conf/https_cert"/>
1729
1730 <!-- stop the included tomcat (also stopping derby and solr) -->
1731 <antcall target="stop" />
1732
1733 <!-- rerun tomcat on port 80
1734 See https://ant.apache.org/manual/Tasks/antcall.html -->
1735 <antcall target="start">
1736 <param name="localhost.port.http" value="80"/>
1737 <param name="default.tomcat.port" value="80"/>
1738 <param name="local.http.url" value="http://${localhost.server.http}"/><!-- For port 80 over http, leave out port number in URL -->
1739 <param name="http.address.restriction" value=""/><!-- don't prevent public access over http of port 80 -->
1740 <param name="https.comment.out.start" value="${comment.start}"/>
1741 <param name="https.comment.out.end" value="${comment.end}"/>
1742 </antcall>
1743
1744 <!-- get the certificate: use zerossl for windows
1745 Download from https://github.com/do-know/Crypt-LE/releases,
1746 For licence see https://github.com/do-know/Crypt-LE/
1747 Usage instructions at https://zerossl.com/usage.html
1748
1749 le64 ==key "${packages.home}\tomcat\conf\https_cert\privkey.key" ==csr "${packages.home}\tomcat\conf\https_cert\${tomcat.server}.csr" ==csr-key "${packages.home}s\tomcat\conf\https_cert\${tomcat.server}.key" ==crt "${packages.home}\tomcat\conf\https_cert\${tomcat.server}.crt" ==domains "${https.cert.domains}" ==path "${packages.home}\tomcat\webapps\ROOT\.well-known\acme-challenge" ==generate-missing ==unlink ==live -export-pfx "${keystore.pass}"
1750
1751 which generates a .pfx file with the same name as the PEM certificate (.crt param below)
1752 .pfx vs .p12: https://stackoverflow.com/questions/6819079/convert-pfx-format-to-p12
1753
1754 In this case "fullchain_and_prvtkey.pfx" is generated, which is the windows value of ${keystore.file} property
1755
1756 Helpful for debugging: https://stackoverflow.com/questions/10302489/ant-script-have-exec-tag-dump-out-entire-command-line
1757 -->
1758 <exec executable="cmd" osfamily="windows" dir="${basedir}/bin/${os.bin.dir}" spawn="false">
1759 <arg value="/c" />
1760 <arg value="le${os.bitness}" />
1761 <arg value="--key" /><arg value="${packages.home}\tomcat\conf\https_cert\privkey.key" />
1762 <arg value="--csr" /><arg value="${packages.home}\tomcat\conf\https_cert\${tomcat.server}.csr" />
1763 <arg value="--csr-key" /><arg value="${packages.home}\tomcat\conf\https_cert\${tomcat.server}.key" />
1764 <!--<arg value="==crt" /><arg value="${packages.home}\tomcat\conf\https_cert\${tomcat.server}.crt" />-->
1765 <arg value="--crt" /><arg value="${packages.home}\tomcat\conf\https_cert\fullchain_and_prvtkey.crt" />
1766 <arg value="--domains" /><arg value="${https.cert.domains}" />
1767 <arg value="--path" /><arg value="${packages.home}\tomcat\webapps\ROOT\.well-known\acme-challenge" />
1768 <arg value="--generate-missing" />
1769 <arg value="--unlink" />
1770 <arg line="${https.testing}" /><!-- minus-minus-live if not testing, empty if testing. https://stackoverflow.com/questions/11840284/pass-arguments-to-apache-ant-exec-task-based-on-the-variables-value -->
1771 <arg value="--export-pfx" /><arg value="${keystore.pass}" />
1772 <arg line="${https.cert.renewal}" /><!-- rewew command on windows appends min-min-renew XX, where if the day the renewal is run is XX days within expiry, the certificate will get renewed. -->
1773 </exec>
1774
1775 <!-- stop the tomcat running on port 80 -->
1776 <antcall target="stop">
1777 <param name="localhost.port.http" value="80"/>
1778 <param name="default.tomcat.port" value="80"/>
1779 <param name="local.http.url" value="http://${localhost.server.http}"/><!-- For port 80 over http, leave out port number in URL -->
1780 <param name="http.address.restriction" value=""/>
1781 <param name="https.comment.out.start" value="${comment.start}"/>
1782 <param name="https.comment.out.end" value="${comment.end}"/>
1783 </antcall>
1784
1785 </target>
1786
1787
1788 <target name="setup-https-cert-linux">
1789 <!-- Running as
1790 ./certbot-auto certonly ==standalone ==preferred-challenges http ==email EMAIL -d DOMAINS
1791 expects input from stdin to accept (A) ToS and say Yes (Y) to sharing email.
1792 We can run in non-interactive mode as the user has at this stage already agreed
1793 to LetsEncrypt's Terms of Service and provided an email address.
1794 -->
1795 <exec executable="/bin/bash" dir="${basedir}/bin/${os.bin.dir}" failonerror="true">
1796 <arg value="./certbot-auto"/>
1797 <arg value="certonly"/>
1798 <arg line="${https.testing}"/><!-- https://stackoverflow.com/questions/11840284/pass-arguments-to-apache-ant-exec-task-based-on-the-variables-value -->
1799 <arg value="--standalone"/>
1800 <arg value="--non-interactive"/>
1801 <arg value="--agree-tos"/>
1802 <arg value="--preferred-challenges"/><arg value="http"/>
1803 <arg value="--email"/><arg value="${https.cert.email}"/>
1804 <arg value="--domains"/><arg value="${https.cert.domains}"/>
1805 </exec>
1806
1807 <!-- sudo openssl pkcs12 -export -out /tmp/DOMAIN_fullchain_and_key.p12 \
1808 -in /etc/letsencrypt/live/DOMAIN/fullchain.pem \
1809 -inkey /etc/letsencrypt/live/DOMAIN/privkey.pem \
1810 -name tomcat
1811 Must run as sudo because only admin has access to the pem files that admin
1812 generated in /etc/letsencrypt
1813 See https://computingforgeeks.com/tomcat-7-with-letsencrypt-ssl-certificate/
1814 but also https://community.letsencrypt.org/t/using-lets-encrypt-with-tomcat/41082
1815 which bypasses the step to generate the java keystore jks file
1816 and uses openssl to generate a pfx file instead of a p12 file
1817 -->
1818
1819 <exec executable="sudo" dir="/tmp" failonerror="true">
1820 <arg value="${basedir}/bin/${os.bin.dir}/openssl/bin/openssl"/>
1821 <arg value="pkcs12"/>
1822 <arg value="-export"/>
1823 <arg value="-out"/><arg value="/tmp/${tomcat.server}_fullchain_and_key.p12"/>
1824 <arg value="-in"/><arg value="/etc/letsencrypt/live/${tomcat.server}/fullchain.pem"/>
1825 <arg value="-inkey"/><arg value="/etc/letsencrypt/live/${tomcat.server}/privkey.pem"/>
1826 <arg value="-name"/><arg value="tomcat"/>
1827 <arg value="-password"/><arg value="pass:${keystore.pass}"/>
1828 </exec>
1829
1830 <!-- Finally, mkdir ${packages.home}/tomcat/conf/https_cert
1831 and copy the file /tmp/${tomcat.server}_fullchain_and_key.p12 into it
1832 and rename to a slightly shorter and simpler name,
1833 see https://stackoverflow.com/questions/8971187/ant-renaming-while-copying-file
1834 The file in tmp has root permissions. But copying it from tmp into
1835 the local account will give the copy local account permissions.
1836 Then sudo to remove the original copy in /tmp
1837 -->
1838 <mkdir dir="${packages.home}/tomcat/conf/https_cert"/>
1839 <!--<copy file="/tmp/${tomcat.server}_fullchain_and_key.p12" todir="${packages.home}/tomcat/conf/https_cert"/>-->
1840 <copy todir="${packages.home}/tomcat/conf/https_cert">
1841 <fileset file="/tmp/${tomcat.server}_fullchain_and_key.p12"/>
1842 <globmapper from="${tomcat.server}_fullchain_and_key.p12" to="${keystore.file}"/>
1843 </copy>
1844
1845 <exec executable="sudo" dir="/tmp" failonerror="true">
1846 <arg line="rm -f /tmp/${tomcat.server}_fullchain_and_key.p12" />
1847 </exec>
1848
1849 </target>
1850
1851
1852 <!-- Revoke the certificate and remove it, including folders.
1853 See https://certbot.eff.org/docs/using.html#revoking-certificates
1854 which also states "if a certificate is a test certificate obtained via the
1855 ==staging or ==test-cert flag, that flag must be passed to the revoke subcommand."
1856 -->
1857 <target name="remove-https-cert" depends="check-os-for-https-cert-support">
1858 <echo>
1859 NOTE: If you're on Linux, you need to have sudo permissions to execute this target.
1860 Enter the sudo password if prompted.
1861 </echo>
1862 <!--
1863 On linux, we use certbot-auto.
1864 It says at https://github.com/certbot/certbot/issues/1741
1865 "you shouldn't run letsencrypt-auto [now called certbot-auto] as superuser,
1866 because the program will invoke sudo when it needs to automatically."
1867 We need to send Y(es) as inputstring to confirm that the
1868 /etc/letsencrypt/live/${tomcat.server} folder can be deleted.
1869 Note osfamily="unix" is separate from osfamily="mac", which comes out handy here as we haven't set up certbot-auto for mac (yet).
1870 -->
1871 <exec executable="./certbot-auto" osfamily="unix" dir="${basedir}/bin/${os.bin.dir}" failonerror="true" inputstring="Y">
1872 <arg value="revoke"/>
1873 <arg line="${https.testing}"/>
1874 <arg value="--cert-path"/><arg value="/etc/letsencrypt/live/${tomcat.server}/cert.pem"/>
1875 </exec>
1876 <!-- The above command already deletes the folder when Y(es) was passed in. Explicitly deleting:
1877 <exec executable="./certbot-auto" dir="${basedir}/bin/${os.bin.dir}" failonerror="true">
1878 <arg value="delete"/>
1879 <arg value="==cert-name"/><arg value="${tomcat.server}"/>
1880 </exec>
1881 -->
1882
1883 <!-- On Windows, we use zeroSSl. For the revoke command, see https://zerossl.com/usage.html#Certificate_revocation -->
1884 <exec executable="cmd" osfamily="windows" dir="${basedir}/bin/${os.bin.dir}" spawn="false">
1885 <arg value="/c" />
1886 <arg value="le${os.bitness}" />
1887 <arg value="--key" /><arg value="${packages.home}\tomcat\conf\https_cert\privkey.key" />
1888 <arg value="--crt" /><arg value="${packages.home}\tomcat\conf\https_cert\fullchain_and_prvtkey.crt"/>
1889 <arg value="--revoke"/>
1890 <arg line="${https.testing}"/>
1891 </exec>
1892
1893 <!-- And remove the https_cert folder -->
1894 <delete dir="${packages.home}/tomcat/conf/https_cert"/>
1895 </target>
1896
1897
1898 <!-- Renewing existing https certificate
1899 Linux:
1900 https://certbot.eff.org/docs/using.html#renewing-certificates
1901 ./path/to/GS3/bin/linux/certbot-auto renew ==quiet ==no-self-upgrade
1902 Windows: reuse Windows issuance target
1903 see https://zerossl.com/usage.html#Certificate_renewal
1904 -->
1905 <target name="renew-existing-https-cert">
1906 <echo>
1907 NOTE: To run this target,
1908 * ensure nothing is running on port 80.
1909 * if you're on Linux, you need to have sudo permissions. Enter the sudo password if prompted.
1910
1911 If you want your cronjob to renew a certificate, you can add pre and post hooks
1912 refer to https://certbot.eff.org/docs/using.html#renewing-certificates
1913 For more information run:
1914 ./path/to/GS3/bin/linux/certbot-auto --help renew
1915 </echo>
1916 <exec executable="./certbot-auto" osfamily="unix" dir="${basedir}/bin/${os.bin.dir}" failonerror="true">
1917 <arg value="renew"/>
1918 <arg value="--quiet"/>
1919 <arg value="--no-self-upgrade"/>
1920 </exec>
1921
1922 <!-- For rewewal on Windows, need to re-run the original (issuance) command and append "min-min-renew XX" to it,
1923 where if it's within XX days of expiry, the certificate will get renewed.
1924 See https://zerossl.com/usage.html#Certificate_renewal -->
1925 <if><bool><istrue value="${current.os.iswindows}"/></bool>
1926
1927 <input addproperty="https.other.domains">Enter a comma separated list of additional domains besides tomcat.server=${tomcat.server} that you registered on issuance, if any</input>
1928 <condition property="https.cert.domains" value="${tomcat.server},${https.other.domains}" else="${tomcat.server}">
1929 <and>
1930 <isset property="https.other.domains" />
1931 <not><matches string="${https.other.domains}" pattern="^\s*$"/></not>
1932 </and>
1933 </condition>
1934 <antcall target="setup-https-cert-windows">
1935 <param name="https.cert.renewal" value="--renew 10"/>
1936 </antcall>
1937 </if>
1938 </target>
1939
1940 <!-- ======================= Tomcat Targets ========================== -->
1941
1942 <!-- this target downloads and installs Tomcat -->
1943 <!-- we download tomcat (version 7 for Java 1.5 and later, version 5 for Java 1.4 plus the 1.4 compatibility package). -->
1944 <target name="prepare-tomcat" depends="init,setup-proxy" if="tomcat.islocal"
1945 description="downloads the appropriate version of Tomcat (Tomcat 5 if using Java 1.4, Tomcat 7 if using Java 1.5 or higher). If you want to change which version of Java you are using between 1.4 and 1.5/7 then you need to run prepare-tomcat">
1946 <if>
1947 <bool>
1948 <not><available file="${packages.home}/tomcat/.flagfile"/></not>
1949 </bool>
1950
1951 <!-- check that packages dir is there -->
1952 <mkdir dir="${packages.home}"/>
1953 <get src="http://www.greenstone.org/gs3files/${tomcat.version}.zip"
1954 dest="${packages.home}/${tomcat.version}.zip"
1955 usetimestamp="true"/>
1956 <unzip src="${packages.home}/${tomcat.version}.zip"
1957 dest="${packages.home}"/>
1958
1959 <!-- If we are using Java 1.4, we'd be using tomcat 5.5 in which case
1960 we would need to have the tomcat compat package to work with Java 1.4-->
1961 <if>
1962 <bool><equals arg1="1.4" arg2="${ant.java.version}"/></bool>
1963 <get src="http://www.greenstone.org/gs3files/${tomcat.version}-compat.zip"
1964 dest="${packages.home}/${tomcat.version}-compat.zip"
1965 usetimestamp="true"/>
1966 <unzip src="${packages.home}/${tomcat.version}-compat.zip"
1967 dest="${packages.home}"/>
1968 </if>
1969
1970 <!-- delete any existing tomcat -->
1971 <delete dir="${packages.home}/tomcat"/>
1972 <move todir="${packages.home}/tomcat">
1973 <fileset dir="${packages.home}/${tomcat.version}"/>
1974 </move>
1975
1976 <!-- To avoid the CGI permissions error appearing continuously in the (localhost) log,
1977 need privileged=true set in the root context.xml file too, not just greenstone context file.
1978 See http://stackoverflow.com/questions/9845936/tomcat-v7-0-load-exception-marking-servlet-ssi-as-unavailable/10305471#10305471
1979 For usage of IfTask IsLessThan: http://antelope.stage.tigris.org/nonav/docs/manual/bk03ch05s02.html -->
1980 <if><bool><not><islessthan arg1="${tomcat.version.major}" arg2="7"/></not></bool>
1981 <copy file="${basedir}/resources/tomcat/root_context.xml.in" tofile="${packages.home}/tomcat/conf/context.xml" overwrite="true" />
1982 </if>
1983
1984
1985 <!--
1986 <copy file="${basedir}/resources/tomcat/setclasspath.bat"
1987 tofile="${packages.home}/tomcat/bin/setclasspath.bat"
1988 overwrite="true"/>
1989 <copy file="${basedir}/resources/tomcat/setclasspath.sh"
1990 tofile="${packages.home}/tomcat/bin/setclasspath.sh"
1991 overwrite="true"/>
1992 -->
1993 <!-- make sure we have execute permission for the .sh files -->
1994 <chmod dir="${packages.home}/tomcat/bin" perm="ugo+rx"
1995 includes="*.sh"/>
1996
1997 <echo file="${packages.home}/tomcat/.flagfile">
1998 the timestamp of this file is the time that tomcat was extracted from the zip files.
1999 it is used to figure out whether the files need to be refreshed or not in `ant prepare-tomcat`
2000 </echo>
2001
2002 <!-- this is not strictly a prepare tomcat thing, but if one changes
2003 Java, then they need to change tomcat as well, so might as well call
2004 it here -->
2005 <antcall target="configure-java-version"/>
2006 <else>
2007 <echo>Tomcat has been prepared, will not prepare</echo>
2008 <echo>Delete ${packages.home}/tomcat/.flagfile to force refresh</echo>
2009 </else>
2010
2011 </if>
2012
2013 </target>
2014
2015 <target name="configure-tomcat" depends="init,configure-tomcat-local,configure-tomcat-external"/>
2016
2017 <target name="configure-tomcat-local" depends="init,perl-for-building" if="tomcat.islocal">
2018 <!-- re-setup the server.xml file -->
2019 <copy file="${basedir}/resources/tomcat/server_tomcat${tomcat.version.major}.xml.in"
2020 tofile="${packages.home}/tomcat/conf/server.xml" overwrite="true">
2021 <filterset>
2022 <filter token="shutdown-port" value="${tomcat.shutdown.port}"/>
2023 <filter token="https.redirect.port" value="${https.redirect.port}"/>
2024 <filter token="localhost.port.http" value="${localhost.port.http}"/>
2025 <filter token="tomcat.port.https" value="${tomcat.port.https}"/>
2026 <!-- Relative path preferred for keystore.file, in case tomcat is moved elsewhere -->
2027 <!--<filter token="keystore.file" value="conf/https_cert/${tomcat.server}.jks" />-->
2028 <!--ON UNIX: <filter token="keystore.file" value="conf/https_cert/fullchain_and_prvtkey.p12" />-->
2029 <!--ON WINDOWS: <filter token="keystore.file" value="conf/https_cert/fullchain_and_prvtkey.pfx" />-->
2030 <filter token="keystore.file" value="conf/https_cert/${keystore.file}" />
2031 <!-- tomcat Connector's keystoreType param defaults to JKS (Java keystore), see https://tomcat.apache.org/tomcat-7.0-doc/config/http.html
2032 We'll follow the instructions at https://community.letsencrypt.org/t/using-lets-encrypt-with-tomcat/41082,
2033 https://www.ssl.com/how-to/create-a-pfx-p12-certificate-file-using-openssl/
2034 and https://computingforgeeks.com/tomcat-7-with-letsencrypt-ssl-certificate/
2035 (minus the keytool step) and use the PKCS12 file generated by openssl directly,
2036 instead of an additional step to generate the java keystore file from that -->
2037 <filter token="keystore.type" value="PKCS12"/>
2038 <filter token="keystore.pass" value="${keystore.pass}"/>
2039 <!--
2040 if server.protocols doesn't contain http, then http is only to be locally available (e.g. for solr servlet on 127.0.0.1)
2041 In that case, see https://serverfault.com/questions/218666/how-to-configure-tomcat-to-only-listen-to-127-0-0-1
2042 -->
2043 <filter token="http.address.restriction" value="${http.address.restriction}"/>
2044 <filter token="https.comment.out.start" value="${https.comment.out.start}"/>
2045 <filter token="https.comment.out.end" value="${https.comment.out.end}"/>
2046 </filterset>
2047 </copy>
2048
2049 <!-- set up the solr context -->
2050
2051 <!-- First work out the IPv4 address for this machine -->
2052 <exec executable="${basedir}/bin/script/IPv4.sh" os="${os.unix}" failonerror="false" outputproperty="ipv4.val">
2053 <arg value="-format-for-tomcat-context"/>
2054 </exec>
2055 <exec executable="${basedir}/bin/script/IPv4.bat" osfamily="windows" failonerror="false" outputproperty="ipv4.val">
2056 <arg value="-format-for-tomcat-context"/>
2057 </exec>
2058
2059 <copy file="${basedir}/ext/solr/solr-tomcat-context.xml.in" tofile="${packages.home}/tomcat/conf/Catalina/localhost/solr.xml" overwrite="true">
2060 <filterset>
2061 <filter token="solr.context" value="${solr.context}"/>
2062 <filter token="gsdl3webhome" value="${web.writablehome}"/>
2063 <filter token="tomcathome" value="${basedir}/packages/tomcat"/>
2064 <filter token="IPv4" value="${ipv4.val}"/>
2065 </filterset>
2066 </copy>
2067
2068 <!-- set up the greenstone3 context, it may have a custom name specified in build.properties -->
2069 <if><bool><not><equals arg1="greenstone3" arg2="${greenstone.context}"></equals></not></bool>
2070 <copy file="${basedir}/resources/tomcat/greenstone3.xml.in" tofile="${basedir}/resources/tomcat/${greenstone.context}.xml.in" overwrite="true"/>
2071 </if>
2072 <copy file="${basedir}/resources/tomcat/${greenstone.context}.xml.in" tofile="${packages.home}/tomcat/conf/Catalina/localhost/${greenstone.context}.xml" overwrite="true">
2073 <filterset>
2074 <filter token="gsdl3webhome" value="${web.home}"/>
2075 <filter token="gsdl3webwritablehome" value="${web.writablehome}"/>
2076 <filter token="privilegedattribute" value="${privileged.attribute}"/>
2077 <filter token="allowedIPs" value="${allowed.IPs}"/>
2078 <filter token="derbyserver" value="${derby.server}"/>
2079 <filter token="derbyserverport" value="${derby.server.port}"/>
2080 </filterset>
2081 </copy>
2082 <if>
2083 <bool>
2084 <and>
2085 <available file="${packages.home}/tomcat/conf/Catalina/localhost/greenstone3.xml"/>
2086 <not><equals arg1="greenstone3" arg2="${greenstone.context}"></equals></not>
2087 </and>
2088 </bool>
2089 <delete file="${packages.home}/tomcat/conf/Catalina/localhost/greenstone3.xml"/>
2090 </if>
2091
2092 <!-- set up the greenstone3 web.xml file -->
2093 <copy file="${basedir}/resources/tomcat/web.xml.in" tofile="${packages.home}/tomcat/conf/web.xml" overwrite="true">
2094 <filterset>
2095 <filter token="perlpath" value="${perl.path}"/>
2096 </filterset>
2097 </copy>
2098 </target>
2099
2100 <target name="configure-tomcat-external" depends="init" unless="tomcat.islocal">
2101 <!-- re-setup the server.xml file -->
2102 <!-- need to edit the config file, or do we get the user to do this???-->
2103 </target>
2104
2105 <target name="configure-solr-ext" depends="init" >
2106 <!-- re-setup the web/ext/solr/solr.xml file -->
2107 <copy file="${web.home}/ext/solr/solr.xml.in"
2108 tofile="${gsdl3.writablehome}/ext/solr/solr.xml" filtering="true" overwrite="true">
2109 <filterset>
2110 <filter token="gsdl3.home" value="${src.gsdl3.home.unix}"/>
2111 <filter token="gsdl3.writablehome" value="${src.gsdl3.writablehome.unix}"/>
2112 </filterset>
2113 </copy>
2114 </target>
2115
2116 <!-- This target runs tomcat's "bin/catalina.bat(.sh) jpda start"
2117 to allow debugging the running GS3 server in Eclipse. See the instructions at
2118 http://www.wikijava.org/wiki/Debugging_a_servlet_with_tomcat_and_Eclipse_tutorial
2119 on how to use this with eclipse
2120 -->
2121 <target name="debug-start-tomcat" description="Startup Tomcat for debugger" depends="init" if="tomcat.islocal">
2122 <property name="tomcat.classpath" refid="local.tomcat.classpath"/>
2123 <property name="tomcat.path" refid="local.tomcat.path"/>
2124
2125 <if><bool>
2126 <isset property="fedora.maxpermsize"/></bool>
2127 <property name="catalina.opts" value="-Djava.util.prefs.syncInterval=2000000 -DGSDL3HOME=$GSDL3HOME -DGSDLOS=$GSDLOS -DPATH=$PATH -Xmx800M ${readonly.catalina.opts} ${fedora.maxpermsize}"/>
2128 <else>
2129 <property name="catalina.opts" value="-Djava.util.prefs.syncInterval=2000000 -DGSDL3HOME=$GSDL3HOME -DGSDLOS=$GSDLOS -DPATH=$PATH -Xmx800M ${readonly.catalina.opts}"/>
2130 </else>
2131 </if>
2132
2133 <echo file="${catalina.home}/bin/setenv.bat">set CLASSPATH=${tomcat.classpath}</echo>
2134 <echo file="${catalina.home}/bin/setenv.sh">export CLASSPATH=${tomcat.classpath}</echo>
2135
2136 <exec executable="${catalina.home}/bin/catalina.sh" os="${os.unix}" dir="${catalina.home}/bin" spawn="false">
2137 <arg value="jpda" />
2138 <arg value="start" />
2139 <env key="JPDA_ADDRESS" value="8000"/> <!-- for debugging Tomcat in Eclipse -->
2140 <env key="JPDA_TRANSPORT" value="dt_socket"/> <!-- for debugging Tomcat in Eclipse -->
2141 <!--<env key="GSDLOS" value="linux"/> do we need this?? -->
2142 <env key="PATH" path="${tomcat.path}"/>
2143 <env key="CATALINA_OPTS" value="${catalina.opts}"/>
2144 <env key="CATALINA_HOME" value="${catalina.home}"/>
2145 <env key="CLASSPATH" path="${tomcat.classpath}"/>
2146 <env key="LD_LIBRARY_PATH" path="${env.LD_LIBRARY_PATH}:${lib.jni}"/>
2147 <env key="DYLD_LIBRARY_PATH" path="${env.DYLD_LIBRARY_PATH}:${lib.jni}:${gdbm.home}/lib"/> <!-- for mac os --> <!-- need gdbm here these days ??-->
2148 <env key="WNHOME" path="${wn.home}"/>
2149 <env key="FEDORA_HOME" path="${fedora.home}"/>
2150 </exec>
2151 <exec executable="${catalina.home}/bin/catalina.bat" osfamily="windows" dir="${catalina.home}/bin" spawn="true">
2152 <arg value="jpda" />
2153 <arg value="start" />
2154 <env key="JPDA_ADDRESS" value="8000"/> <!-- for debugging Tomcat in Eclipse -->
2155 <env key="JPDA_TRANSPORT" value="dt_socket"/> <!-- for debugging Tomcat in Eclipse -->
2156 <env key="GSDLOS" value="windows"/>
2157 <env key="GSDL3HOME" value="${basedir}"/>
2158 <env key="Path" path="${tomcat.path}"/>
2159 <env key="PATH" path="${tomcat.path}"/>
2160 <env key="CATALINA_OPTS" value="${catalina.opts}"/>
2161 <env key="CATALINA_HOME" value="${catalina.home}"/>
2162 <env key="CLASSPATH" path="${tomcat.classpath}"/>
2163 <env key="FEDORA_HOME" path="${fedora.home}"/>
2164 </exec>
2165 <!-- wait for the server to startup in case other targets need it running -->
2166 <waitfor maxwait="5" maxwaitunit="second">
2167 <and>
2168 <socket server="${tomcat.server}" port="${default.tomcat.port}"/>
2169 <!--<http url="${default.server.protocol}://${tomcat.server}:${default.tomcat.port}${app.path}/index.html"/>-->
2170 <http url="${local.http.url}${app.path}/index.html"/>
2171 </and>
2172 </waitfor>
2173 </target>
2174
2175 <target name="start-tomcat" description="Startup only Tomcat" depends="check-tomcat-started">
2176
2177 <if><bool><istrue value="${tomcat.isstarted}"/></bool>
2178 <echo>**************************************</echo>
2179 <echo>A WEB SERVER IS ALREADY RUNNING ON ${default.server.protocol}://${tomcat.server}:${default.tomcat.port} (${local.http.url}). NOT STARTING.</echo>
2180 <echo>**************************************</echo>
2181 <else>
2182 <antcall target="force-start-tomcat"/>
2183 </else>
2184 </if>
2185 </target>
2186
2187 <!-- Another way: http://ptrthomas.wordpress.com/2006/03/25/how-to-start-and-stop-tomcat-from-ant/ -->
2188 <target name="force-start-tomcat" description="Startup only Tomcat" depends="init" if="tomcat.islocal">
2189
2190 <property name="tomcat.classpath" refid="local.tomcat.classpath"/>
2191 <property name="tomcat.path" refid="local.tomcat.path"/>
2192
2193 <if><bool>
2194 <isset property="fedora.maxpermsize"/></bool>
2195 <property name="catalina.opts" value="-Djava.util.prefs.syncInterval=2000000 -DGSDL3HOME=$GSDL3HOME -DGSDLOS=$GSDLOS -DPATH=$PATH -Xmx800M ${readonly.catalina.opts} ${fedora.maxpermsize}"/>
2196 <else>
2197 <property name="catalina.opts" value="-Djava.util.prefs.syncInterval=2000000 -DGSDL3HOME=$GSDL3HOME -DGSDLOS=$GSDLOS -DPATH=$PATH -Xmx800M ${readonly.catalina.opts}"/>
2198 </else>
2199 </if>
2200
2201 <echo file="${catalina.home}/bin/setenv.bat">set CLASSPATH=${tomcat.classpath}</echo>
2202 <echo file="${catalina.home}/bin/setenv.sh">export CLASSPATH=${tomcat.classpath}</echo>
2203
2204 <!-- using osfamily instead of testing os against os.windows list of recognised windows versions
2205 so that future windows versions are included. See http://simonharrer.wordpress.com/tag/osfamily/
2206 Can't use the osfamily test for linux-type machines as a group since osfamily=unix is separate from osfamily=mac,
2207 see http://ant-contrib.sourceforge.net/tasks/tasks/osfamily.html -->
2208
2209 <exec executable="${catalina.home}/bin/startup.sh" os="${os.unix}" dir="${catalina.home}/bin" spawn="false">
2210 <!--<env key="GSDLOS" value="linux"/> do we need this?? -->
2211 <env key="GSDL3HOME" value="${basedir}"/>
2212 <env key="PATH" path="${tomcat.path}"/>
2213 <env key="CATALINA_OPTS" value="${catalina.opts}"/>
2214 <env key="CATALINA_HOME" value="${catalina.home}"/>
2215 <env key="CLASSPATH" path="${tomcat.classpath}"/>
2216 <env key="LD_LIBRARY_PATH" path="${env.LD_LIBRARY_PATH}:${lib.jni}"/>
2217 <env key="DYLD_LIBRARY_PATH" path="${env.DYLD_LIBRARY_PATH}:${lib.jni}:${gdbm.home}/lib"/> <!-- for mac os --> <!-- need gdbm here these days ??-->
2218 <env key="WNHOME" path="${wn.home}"/>
2219 <env key="FEDORA_HOME" path="${fedora.home}"/>
2220 </exec>
2221 <exec executable="${catalina.home}/bin/startup.bat" osfamily="windows" dir="${catalina.home}/bin" spawn="true">
2222 <env key="GSDLOS" value="windows"/>
2223 <env key="GSDL3HOME" value="${basedir}"/>
2224 <env key="Path" path="${tomcat.path}"/>
2225 <env key="PATH" path="${tomcat.path}"/>
2226 <env key="CATALINA_OPTS" value="${catalina.opts}"/>
2227 <env key="CATALINA_HOME" value="${catalina.home}"/>
2228 <env key="CLASSPATH" path="${tomcat.classpath}"/>
2229 <env key="FEDORA_HOME" path="${fedora.home}"/>
2230 </exec>
2231 <!-- wait for the server to startup in case other targets need it running -->
2232 <waitfor maxwait="5" maxwaitunit="second">
2233 <and>
2234 <socket server="${tomcat.server}" port="${default.tomcat.port}"/>
2235 <!--<http url="${default.server.protocol}://${tomcat.server}:${default.tomcat.port}${app.path}/index.html"/>-->
2236 <http url="${local.http.url}${app.path}/index.html"/>
2237 </and>
2238 </waitfor>
2239
2240 </target>
2241
2242 <!--ant task http: http://www.jajakarta.org/ant/ant-1.6.1/docs/ja/manual/api/org/apache/tools/ant/taskdefs/condition/Http.html-->
2243 <target name="reconfigure" description="Reconfigure the message router">
2244 <waitfor maxwait="5" maxwaitunit="second">
2245 <!--<http url="${default.server.protocol}://${tomcat.server}:${default.tomcat.port}${app.path}${server.default.servlet}?a=s&amp;sa=c"/>-->
2246 <http url="${local.http.url}${app.path}${server.default.servlet}?a=s&amp;sa=c"/>
2247 </waitfor>
2248 </target>
2249
2250 <!--Command-line args to Ant: http://www.jguru.com/faq/view.jsp?EID=471794-->
2251 <target name="reconfigure-collection" description="Reconfigure the collection">
2252 <waitfor maxwait="5" maxwaitunit="second">
2253 <!--<http url="${default.server.protocol}://${tomcat.server}:${default.tomcat.port}${app.path}${server.default.servlet}?a=s&amp;sa=c&amp;sc=${collection}"/>-->
2254 <http url="${local.http.url}${app.path}${server.default.servlet}?a=s&amp;sa=c&amp;sc=${collection}"/>
2255 </waitfor>
2256 </target>
2257
2258 <!-- windows: do we want to launch a webrowser?? -->
2259 <!-- shouldn't this test whether anything is running first?
2260 It's safer to always attempt to stop tomcat: that way we won't be dependent on the right time
2261 to check whether the server is stopped or still running before attempting to start again.
2262 This target, which was recently called force-stop-tomcat for a while but is back to being
2263 called stop-tomcat, now hides the Java exception output that appears whenever tomcat is already
2264 stopped as happens when stop-tomcat is called consecutively. -->
2265 <target name="force-stop-tomcat" description="Shutdown only Tomcat" depends="init" if="tomcat.islocal">
2266 <exec executable="${catalina.home}/bin/shutdown.sh" os="${os.unix}" dir="${catalina.home}/bin" spawn="false">
2267 <env key="FEDORA_HOME" path="${fedora.home}"/>
2268 <env key="CATALINA_HOME" value="${catalina.home}"/>
2269 <arg line=">/dev/null 2>&amp;1"/>
2270 </exec>
2271 <exec executable="${catalina.home}/bin/shutdown.bat" osfamily="windows" dir="${catalina.home}/bin" spawn="false">
2272 <env key="FEDORA_HOME" path="${fedora.home}"/>
2273 <env key="CATALINA_HOME" value="${catalina.home}"/>
2274 <arg line=">nul 2>&amp;1"/>
2275 </exec>
2276 </target>
2277
2278 <!-- Can also try the "socket" condition in place of the "http" condition
2279 And also use a <waitfor> in place of <condition>, such as:
2280 <waitfor maxwait="5" maxwaitunit="second" timeoutproperty="tomcat.isstopped"><http url="..."/></waitfor>
2281 The http URL resolves to host:port/greenstone3
2282 Condition uses <http/> rather than <socket/> for testing, since if the server was stopped, the socket
2283 might still be in use for some moments. We test the URL with the http condition since it's likelier to
2284 fail sooner if the server has indeed been stopped. -->
2285 <target name="check-tomcat-running">
2286 <condition property="tomcat.isrunning">
2287 <!--<http url="${default.server.protocol}://${tomcat.server}:${default.tomcat.port}${app.path}"/>-->
2288 <!--<http url="${default.server.protocol}://${tomcat.server}:${default.tomcat.port}"/>--><!-- untrusted certificates won't work, so don't test https urls-->
2289 <http url="${local.http.url}"/><!-- testing the local http url instead -->
2290 </condition>
2291 </target>
2292
2293 <!--
2294 <target name="verbose-check-tomcat-running">
2295 <condition property="tomcat.isrunning" value="true" else="false">
2296 <http url="${default.server.protocol}://${tomcat.server}:${default.tomcat.port}"/>
2297 <http url="${local.http.url}"/>
2298 </condition>
2299 <echo>Tomcat is running: ${tomcat.isrunning}</echo>
2300 </target>
2301 -->
2302 <target name="verbose-check-tomcat-running" depends="check-tomcat-running">
2303 <if>
2304 <bool>
2305 <istrue value="${tomcat.isrunning}"/>
2306 </bool>
2307 <echo>Tomcat is running: ${tomcat.isrunning}</echo>
2308 <else><echo>Tomcat is running: false</echo></else><!-- tomcat.isrunning not set -->
2309 </if>
2310 </target>
2311
2312 <!-- Need a copy of the check-tomcat-running target with a distinct property, because ant restart runs
2313 both stop and start, both of which need to do tomcat checks. Each property can be set only once during
2314 an invocation with ant. So ant restart will need two properties to store each of the tomcat checks -->
2315 <target name="check-tomcat-started">
2316 <condition property="tomcat.isstarted">
2317 <!--<http url="${default.server.protocol}://${tomcat.server}:${default.tomcat.port}"/>-->
2318 <http url="${local.http.url}"/>
2319 </condition>
2320 </target>
2321
2322
2323
2324 <!-- stop-tomcat checks if the tomcat server is already running. If it appears to be running
2325 (regardless of whether tomcat was just starting to shut down), this target calls force-stop-tomcat
2326 to issue the shutdown command to tomcat. Then it waits for at most 15 seconds for the server to
2327 actually stop by checking the socket at which tomcat listens every second, printing a warning
2328 at the end of the max wait time of 15 seconds if tomcat was still running. -->
2329 <target name="stop-tomcat" description="Shutdown only Tomcat if running" depends="check-tomcat-running" if="tomcat.isrunning">
2330 <antcall target="force-stop-tomcat"/>
2331
2332 <property name="wait.numchecks" value="15"/>
2333 <echo>Waiting for the server to shutdown... (${wait.numchecks} seconds max)</echo>
2334 <waitfor maxwait="${wait.numchecks}" maxwaitunit="second" checkevery="1" checkeveryunit="second" timeoutproperty="tomcat.timedout">
2335 <not><socket server="${tomcat.server}" port="${default.tomcat.port}"/></not>
2336 </waitfor>
2337
2338 <if>
2339 <bool>
2340 <isset property="${tomcat.timedout}"/>
2341 </bool>
2342 <property name="tomcat.isrunning" value="true"/>
2343 <echo>WARNING: Checked the socket ${wait.numchecks} times, but port ${default.tomcat.port} is still busy.</echo>
2344 <else>
2345 <echo>Tomcat is stopped.</echo>
2346 <property name="tomcat.isrunning" value="false"/>
2347 </else>
2348 </if>
2349 </target>
2350
2351 <target name="restart-tomcat" description="Shutdown and restart only Tomcat" depends="init,stop-tomcat,force-start-tomcat"/>
2352
2353 <target name="setup-catalina-ant-tasks">
2354 <!-- Configure the custom Ant tasks for the Tomcat Manager application -->
2355 <taskdef name="deploy" classname="org.apache.catalina.ant.DeployTask"
2356 classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
2357 <taskdef name="list" classname="org.apache.catalina.ant.ListTask"
2358 classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
2359 <taskdef name="reload" classname="org.apache.catalina.ant.ReloadTask"
2360 classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
2361 <taskdef name="resources" classname="org.apache.catalina.ant.ResourcesTask"
2362 classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
2363 <taskdef name="roles" classname="org.apache.catalina.ant.RolesTask"
2364 classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
2365 <taskdef name="start" classname="org.apache.catalina.ant.StartTask"
2366 classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
2367 <taskdef name="stop" classname="org.apache.catalina.ant.StopTask"
2368 classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
2369 <taskdef name="undeploy" classname="org.apache.catalina.ant.UndeployTask"
2370 classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
2371 </target>
2372
2373 <!-- http://blog.andrewbeacock.com/2007/11/how-to-truncate-log-file-using-ubuntu.html
2374 Doing "cat </dev/null > packages/tomcat/logs/catalina.out" doesn't work as an ant target.
2375 It seems to have a problem with cat or </dev/null, with or without the < sign. -->
2376 <target name="reset-logs" description="Empties catalina.out, greenstone.log and contents of web/logs/tmp">
2377 <echo>Truncating catalina.out, solr.log, greenstone.log and server.log, and emptying ${web.writablehome}/logs/tmp</echo>
2378 <exec executable="rm" os="${os.unix}" dir="${catalina.home}/logs" spawn="false">
2379 <arg value="-f"/>
2380 <arg value="catalina.out"/>
2381 </exec>
2382 <exec executable="rm" os="${os.unix}" dir="${web.writablehome}/logs" spawn="false">
2383 <arg value="-f"/>
2384 <arg value="greenstone.log"/>
2385 </exec>
2386 <exec executable="rm" os="${os.unix}" dir="${web.writablehome}/logs" spawn="false">
2387 <arg value="-f"/>
2388 <arg value="server.log"/>
2389 </exec>
2390
2391 <exec executable="touch" os="${os.unix}" dir="${catalina.home}/logs"
2392 spawn="false">
2393 <arg value="catalina.out"/>
2394 </exec>
2395 <exec executable="touch" os="${os.unix}" dir="${web.writablehome}/logs"
2396 spawn="false">
2397 <arg value="greenstone.log"/>
2398 </exec>
2399 <exec executable="touch" os="${os.unix}" dir="${web.writablehome}/logs"
2400 spawn="false">
2401 <arg value="server.log"/>
2402 </exec>
2403
2404 <exec executable="cmd" osfamily="windows" dir="${catalina.home}/logs" spawn="false">
2405 <arg line="/c echo. > catalina.out"/>
2406 </exec>
2407 <exec executable="cmd" osfamily="windows" dir="${web.writablehome}/logs" spawn="false">
2408 <arg line="/c echo. > greenstone.log"/>
2409 </exec>
2410 <exec executable="cmd" osfamily="windows" dir="${web.writablehome}/logs" spawn="false">
2411 <arg line="/c echo. > server.log"/>
2412 </exec>
2413
2414 <!-- if ext/solr/logs/solr.log exists, truncate it -->
2415 <if><bool><available file="${solr-ext.home}/logs/solr.log" type="file"/></bool>
2416 <exec executable="rm" os="${os.unix}" dir="${solr-ext.home}/logs" spawn="false">
2417 <arg value="-f"/>
2418 <arg value="solr.log"/>
2419 </exec>
2420 <exec executable="touch" os="${os.unix}" dir="${solr-ext.home}/logs" spawn="false">
2421 <arg value="solr.log"/>
2422 </exec>
2423 <exec executable="cmd" osfamily="windows" dir="${solr-ext.home}/logs" spawn="false">
2424 <arg line="/c echo. > solr.log"/>
2425 </exec>
2426 </if>
2427
2428 <if>
2429 <bool><available file="${web.writablehome}/logs/tmp" type="dir"/></bool>
2430 <delete>
2431 <fileset dir="${web.writablehome}/logs/tmp" includes="**/*"/>
2432 </delete>
2433 </if>
2434 </target>
2435
2436 <target name="clear-tomcat-sessions" description="Clear the Tomcat Session info." depends="init">
2437 <exec executable="cmd" osfamily="windows" dir="${catalina.home}/work/Catalina/localhost/greenstone3" spawn="false">
2438 <arg line="/c echo. > SESSIONS.ser"/>
2439 </exec>
2440 <exec executable="rm" os="${os.unix}" dir="${catalina.home}/work/Catalina/localhost/greenstone3" spawn="false">
2441 <arg value="-f"/>
2442 <arg value="SESSIONS.ser"/>
2443 </exec>
2444
2445 </target>
2446 <!-- ======================= ant Targets ============================ -->
2447 <target name="prepare-ant" depends="init">
2448 <if>
2449 <bool>
2450 <not><available file="${packages.home}/ant/.flagfile"/></not>
2451 </bool>
2452 <property name="ant.download.version" value="apache-ant-1.9.13" />
2453 <get src="http://www.greenstone.org/gs3files/${ant.download.version}-bin.zip"
2454 dest="${packages.home}/${ant.download.version}-bin.zip"
2455 usetimestamp="true"/>
2456 <unzip src="${packages.home}/${ant.download.version}-bin.zip"
2457 dest="${packages.home}"/>
2458 <move todir="${packages.home}/ant">
2459 <fileset dir="${packages.home}/${ant.download.version}"/>
2460 </move>
2461 <echo file="${packages.home}/ant/.flagfile">
2462 the timestamp of this file is the time that ant was extracted from the zip files.
2463 it is used to figure out whether the files need to be refreshed or not in `ant prepare-ant`
2464 </echo>
2465
2466 <else>
2467 <echo>Ant has been prepared, will not prepare</echo>
2468 <echo>Delete ${packages.home}/ant/.flagfile to force refresh</echo>
2469 </else>
2470
2471 </if>
2472 </target>
2473
2474 <!-- ======================= Admin Targets ============================ -->
2475
2476 <!-- This target won't work with Eclipse because the SecureInputHandler used below conflicts with it.
2477 See http://www.dcepler.net/post.cfm/hiding-password-input-in-ant
2478 But you can do: echo mypassword | ant config-admin -->
2479 <target name="config-admin" description="Reset admin password">
2480 <input addproperty="admin.password" defaultvalue="admin" message="New admin password (3-20 characters):&gt;">
2481 <handler classname="org.apache.tools.ant.input.SecureInputHandler" /> <!-- password won't be visible on screen -->
2482 </input>
2483 <!--<echo>PWD: ${admin.password}</echo>-->
2484 <antcall target="update-userdb">
2485 <param name="user.username" value="admin"/>
2486 <param name="user.password" value="${admin.password}"/>
2487 <param name="user.groups" value=""/>
2488 <param name="user.status" value=""/>
2489 <param name="user.comment" value="Password updated."/>
2490 <param name="user.email" value=""/>
2491 </antcall>
2492 </target>
2493
2494 <target name="config-user" description="Add or modify users" depends="get-user-data,update-userdb"/>
2495
2496 <target name="get-user-data" description="Get user details">
2497 <input addproperty="user.username" message="Username:&gt;"/>
2498 <input addproperty="user.password" defaultvalue="" message="Password (3-20 characters):&gt;">
2499 <handler classname="org.apache.tools.ant.input.SecureInputHandler" /> <!-- password won't be visible on screen -->
2500 </input>
2501 <input addproperty="user.groups" defaultvalue="" message="Groups (comma-separated list, e.g. personal-collections-editor):&gt;"/>
2502 <input addproperty="user.status" defaultvalue="true" message="Enabled (true/false):&gt;"/>
2503 <input addproperty="user.comment" defaultvalue="" message="Comment:&gt;"/>
2504 <input addproperty="user.email" defaultvalue="" message="Email:&gt;"/>
2505 </target>
2506
2507 <!-- This target won't work with Eclipse because the SecureInputHandler used below conflicts with it.
2508 See http://www.dcepler.net/post.cfm/hiding-password-input-in-ant
2509 But you can do: echo mypassword | ant config-admin -->
2510 <target name="update-userdb" description="Add or modify users" depends="start-derby">
2511
2512 <!--
2513 We're now using derby networked server, so stopping and starting tomcat is not necessary.
2514 For embedded derby: stop tomcat if running, since derby db is embedded
2515 and only allows connections from one jvm instance at a time
2516 See http://db.apache.org/derby/papers/DerbyTut/embedded_intro.html
2517 The ${tomcat.isrunning} property is set by the depends-target "check-tomcat-running" -->
2518
2519 <!-- Need the derby networked server to be running in order to modify the usersDB.
2520 The start-derby task will check if derby is already running (if not, ${derby.isstarted} will
2521 be false) and will only start up networked derby if it is not already running.
2522 The ${derby.isstarted} property is set by the depends-target "start-derby", since it won't
2523 set the property if called with antcall (like launching in a subshell). Have to use 'depends'.
2524 We'll check ${derby.isstarted} at the end to stop derby again if we had to start it up now.-->
2525 <!--<antcall target="start-derby"/>-->
2526
2527 <!-- wait a max of 5 seconds for the derbyserver to have started up -->
2528 <waitfor maxwait="5" maxwaitunit="second">
2529 <socket server="${derby.server}" port="${derby.server.port}"/>
2530 </waitfor>
2531
2532 <!--<echo>${admin.password}</echo>--> <!-- for testing -->
2533 <echo>gsdl3.writablehome: ${gsdl3.writablehome}</echo> <!-- for testing -->
2534 <echo>web.home: ${web.home}</echo> <!-- for testing -->
2535 <java classname="org.greenstone.gsdl3.util.ModifyUsersDB">
2536 <classpath refid="compile.classpath"/> <!--for ${web.lib}/gsdl3.jar and supporting files-->
2537 <sysproperty key="gsdl3.writablehome" value="${gsdl3.writablehome}" /> <!-- passes -D<syspropKey=syspropVal> to java class ModifyUsersDB. Available in java code as System.getProperty("syspropKey") -->
2538 <arg file="${web.home}/etc/usersDB"/>
2539 <arg value="${user.username}"/>
2540 <arg value="password=${user.password}"/>
2541 <arg value="groups=${user.groups}"/>
2542 <arg value="status=${user.status}"/>
2543 <arg value="comment=${user.comment}"/>
2544 <arg value="email=${user.email}"/>
2545 </java>
2546
2547 <!-- Need to stop networked derby again if we ran it for this target with the depends=start-derby call.
2548 The test here is for <not>derby.isstarted</not>, as the property would be the same as before
2549 derby was started, since properties are immutable within a single ant command. -->
2550 <if>
2551 <bool>
2552 <not><istrue value="${derby.isstarted}"/></not>
2553 </bool>
2554 <antcall target="force-stop-derby"/>
2555 </if>
2556
2557 </target>
2558
2559
2560 <!-- ======================= Axis Targets ============================ -->
2561
2562 <target name="prepare-axis" depends="init">
2563
2564 <if>
2565 <bool>
2566 <not><available file="${packages.home}/axis/.flagfile"/></not>
2567 </bool>
2568
2569 <get src="http://www.greenstone.org/gs3files/${axis.zip.version}"
2570 dest="${packages.home}/${axis.zip.version}"
2571 usetimestamp="true"/>
2572 <unzip src="${packages.home}/${axis.zip.version}"
2573 dest="${packages.home}"/>
2574 <move todir="${packages.home}/axis">
2575 <fileset dir="${packages.home}/${axis.dir.version}"/>
2576 </move>
2577 <!-- install axis into greenstone web app -->
2578 <copy todir="${web.lib}">
2579 <fileset dir="${packages.home}/axis/webapps/axis/WEB-INF/lib">
2580 <include name="*.jar"/>
2581 </fileset>
2582 </copy>
2583 <copy todir="${web.home}">
2584 <fileset dir="${packages.home}/axis/webapps/axis/">
2585 <include name="*.jsp"/>
2586 <include name="*.jws"/>
2587 </fileset>
2588 </copy>
2589 <copy tofile="${web.home}/axis.html" file="${packages.home}/axis/webapps/axis/index.html"/>
2590 <copy todir="${web.classes}">
2591 <fileset dir="${packages.home}/axis/webapps/axis/WEB-INF/classes">
2592 <include name="*.properties"/>
2593 </fileset>
2594 </copy>
2595 <echo file="${packages.home}/axis/.flagfile">
2596 the timestamp of this file is the time that axis was extracted from the zip files.
2597 it is used to figure out whether the files need to be refreshed or not in `ant prepare-axis`
2598 </echo>
2599
2600 <else>
2601 <echo>Axis has been prepared, will not prepare</echo>
2602 <echo>Delete ${packages.home}/axis/.flagfile to force refresh</echo>
2603 </else>
2604
2605 </if>
2606 </target>
2607
2608 <target name="soap-deploy-site" depends="init,get-sitename,get-siteuri,get-webservices,create-deployment-files,deploy-site"
2609 description="Deploy a SOAP web service for a local Greenstone site. Tomcat must be running for this to work."/>
2610
2611 <target name="deploy-site">
2612 <java classname="org.apache.axis.client.AdminClient">
2613 <classpath refid="compile.classpath"/>
2614 <arg value="-l"/>
2615 <arg value="${default.server.protocol}://${tomcat.server}:${default.tomcat.port}${app.path}/servlet/AxisServlet"/>
2616 <arg file="${basedir}/resources/soap/deploy.wsdd"/>
2617 </java>
2618 <delete file="${basedir}/resources/soap/deploy.wsdd"/> <!--clean up, no longer used-->
2619 </target>
2620
2621 <target name="soap-undeploy-site" depends="get-undeploy-service-name"
2622 description="Undeploy a SOAP web service for a local Greenstone site. Tomcat must be running for this to work.">
2623 <filter token="servicesname" value="${axis.undeploy.servicename}"/>
2624 <copy file="${basedir}/resources/soap/undeploy-site.wsdd.template"
2625 tofile="${basedir}/resources/soap/undeploy.wsdd"
2626 filtering="true"
2627 overwrite="true"/>
2628 <java classname="org.apache.axis.client.AdminClient">
2629 <classpath refid="compile.classpath"/>
2630 <arg value="-l"/>
2631 <arg value="${default.server.protocol}://${tomcat.server}:${default.tomcat.port}${app.path}/servlet/AxisServlet"/>
2632 <arg file="${basedir}/resources/soap/undeploy.wsdd"/>
2633 </java>
2634 <delete file="${basedir}/resources/soap/undeploy.wsdd"/> <!--clean up, no longer used-->
2635 </target>
2636
2637 <!-- this target used to deploy the default web service SOAPServer (base.webservice.name) on the localsite server
2638 with the default servicename of localsite-->
2639 <target name="deploy-localsite" depends="init"
2640 description="Deploy the SOAP server for localsite. Will start and stop Tomcat.">
2641 <antcall target="force-start-tomcat"/>
2642 <echo>Deploying ${base.webservice.name} web services for localsite under service name: localsite</echo>
2643 <antcall target="create-deployment-files">
2644 <param name="axis.sitename" value="localsite"/>
2645 <param name="axis.servicesname" value="${base.webservice.name}"/>
2646 <param name="axis.siteuri" value="localsite"/>
2647 </antcall>
2648 <antcall target="deploy-site">
2649 <param name="axis.sitename" value="localsite"/>
2650 <param name="axis.servicesname" value="${base.webservice.name}"/>
2651 <param name="axis.siteuri" value="localsite"/>
2652 </antcall>
2653 <echo>The Greenstone server has been started up. If you do not want it running, please type: ant stop.</echo>
2654 </target>
2655
2656 <target name="get-sitename" unless="axis.sitename">
2657 <input addproperty="axis.sitename" defaultvalue="localsite">What site do you want to deploy services for?
2658Press Enter for default:localsite</input>
2659 </target>
2660
2661 <target name="get-undeploy-service-name" unless="axis.undeploy.servicename">
2662 <input addproperty="axis.undeploy.servicename" defaultvalue="localsite">Please enter the full name of the service you wish to undeploy.
2663To find out which web services you've got deployed, point your browser to ${default.server.protocol}://${tomcat.server}:${default.tomcat.port}/greenstone3/services
2664Or press Enter for undeploying the default:localsite /&gt;</input>
2665 <echo>Name of service to undeploy: ${axis.undeploy.servicename}</echo>
2666 </target>
2667
2668 <target name="get-webservices" unless="axis.servicesname">
2669 <input addproperty="axis.servicesname" defaultvalue="${base.webservice.name}">Which set of web services do you want to deploy?
2670Choose from: ${web.services.list}
2671Or press Enter for default:${base.webservice.name} /&gt;</input>
2672 <echo>${axis.servicesname}</echo>
2673 </target>
2674
2675 <target name="get-siteuri" depends="get-sitename,get-webservices" unless="axis.siteuri">
2676 <input addproperty="axis.siteuri" defaultvalue="${axis.servicesname}${axis.sitename}">What name do you want the service to have? (Press Enter for default:${axis.servicesname}${axis.sitename})</input>
2677 <echo>Site: ${axis.sitename}, services: ${axis.servicesname}, servicesname: ${axis.siteuri}</echo>
2678 </target>
2679
2680 <target name="set-soapmethod" description="Determines whether the service in the wsdd should have the style attribute set to message or the provider attribute set to java:RPC" if="axis.servicesname">
2681 <condition property="soap.method" value="provider='java:MSG' style='message' use='literal'">
2682 <equals arg1="${axis.servicesname}" arg2="${base.webservice.name}"/>
2683 </condition>
2684
2685 <!--everything else defaults to java:RPC at present-->
2686 <condition property="soap.method" value="provider='java:RPC'">
2687 <not>
2688 <equals arg1="${axis.servicesname}" arg2="${base.webservice.name}"/>
2689 </not>
2690 </condition>
2691 </target>
2692
2693 <target name="create-deployment-files" depends="set-soapmethod" if="axis.sitename">
2694 <filter token="sitename" value="${axis.sitename}"/>
2695 <filter token="siteuri" value="${axis.siteuri}"/>
2696 <filter token="servicesname" value="${axis.servicesname}"/>
2697 <filter token="soapmethod" value="${soap.method}"/>
2698 <copy file="${basedir}/resources/soap/site.wsdd.template"
2699 tofile="${basedir}/resources/soap/deploy.wsdd"
2700 filtering="true"
2701 overwrite="true"/>
2702 <!-- create the java files and compile them -->
2703 <copy file="${basedir}/resources/java/${axis.servicesname}.java.in"
2704 tofile="${src.gsdl3.home}/${axis.servicesname}${axis.sitename}.java"
2705 filtering="true"
2706 overwrite="true"/>
2707 <mkdir dir="${build.home}"/>
2708 <javac srcdir="${src.home}"
2709 destdir="${build.home}"
2710 includeantruntime="${compile.includeantruntime}"
2711 debug="${compile.debug}"
2712 deprecation="${compile.deprecation}"
2713 optimize="${compile.optimize}"
2714 encoding="${compile.encoding}">
2715 <classpath refid="compile.classpath"/>
2716 <include name="org/greenstone/gsdl3/${axis.servicesname}${axis.sitename}.java" />
2717 </javac>
2718 <mkdir dir="${web.classes}/org/greenstone/gsdl3"/>
2719 <copy file="${build.home}/org/greenstone/gsdl3/${axis.servicesname}${axis.sitename}.class"
2720 tofile="${web.classes}/org/greenstone/gsdl3/${axis.servicesname}${axis.sitename}.class"
2721 overwrite="true" />
2722 </target>
2723
2724
2725 <!-- ====================== Core targets ============================== -->
2726 <!-- core targets refer to the core gsdl3 java src -->
2727
2728 <target name="prepare-core"/>
2729
2730 <target name="configure-core"/>
2731
2732 <target name="update-core" depends="init,svnupdate-core,clean-core,compile-core"
2733 description="Update only the Greenstone core" />
2734
2735 <target name="svnupdate-core" unless="nosvn.mode">
2736 <exec executable="svn">
2737 <arg value="update"/>
2738 <arg value="${basedir}"/>
2739 <arg value="-r"/><arg value="${branch.revision}"/>
2740 </exec>
2741 </target>
2742
2743 <target name="clean-core"
2744 description="Clean only the Greenstone core">
2745 <!-- should this delete the gsdl3.jar from web/WEB-INF?? -->
2746 <delete dir="${build.home}"/>
2747 </target>
2748
2749 <target name="compile-core" depends="init"
2750 description="Compile only the Greenstone core">
2751 <mkdir dir="${build.home}"/>
2752
2753 <if><bool><isset property="with.jni"/></bool>
2754 <javac srcdir="${src.home}"
2755 destdir="${build.home}"
2756 includeantruntime="${compile.includeantruntime}"
2757 debug="${compile.debug}"
2758 deprecation="${compile.deprecation}"
2759 optimize="${compile.optimize}"
2760 encoding="${compile.encoding}">
2761 <classpath>
2762 <path refid="compile.classpath"/>
2763 </classpath>
2764 </javac>
2765 <else>
2766 <property name="gsprefix" value=""/>
2767 <javac srcdir="${src.home}"
2768 destdir="${build.home}"
2769 includeantruntime="${compile.includeantruntime}"
2770 debug="${compile.debug}"
2771 deprecation="${compile.deprecation}"
2772 optimize="${compile.optimize}"
2773 encoding="${compile.encoding}">
2774 <classpath>
2775 <path refid="compile.classpath"/>
2776 </classpath>
2777 <exclude name="org/greenstone/gsdl3/service/GS2MGPPRetrieve.java"/>
2778 <exclude name="org/greenstone/gsdl3/service/GS2MGPPSearch.java"/>
2779 <exclude name="org/greenstone/gsdl3/service/GS2MGSearch.java"/>
2780 <exclude name="org/greenstone/gsdl3/service/GS2MGRetrieve.java"/>
2781 <exclude name="org/greenstone/gsdl3/service/GoogleNgramMGPPSearch.java"/>
2782 <exclude name="org/greenstone/gsdl3/service/PhindPhraseBrowse.java"/>
2783 <exclude name="org/greenstone/gsdl3/util/GDBMWrapper.java"/>
2784 </javac>
2785 </else>
2786 </if>
2787 <jar destfile="${build.home}/gsdl3.jar">
2788 <fileset dir="${build.home}">
2789 <include name="org/greenstone/gsdl3/**"/>
2790 <include name="org/flax/**"/>
2791 <exclude name="**/Test.class"/>
2792 </fileset>
2793 <manifest>
2794 <attribute name="Built-By" value="${user.name}" />
2795 </manifest>
2796 </jar>
2797 <copy file="${build.home}/gsdl3.jar" todir="${web.lib}"/>
2798
2799 <jar destfile="${build.home}/gutil.jar">
2800 <fileset dir="${build.home}">
2801 <include name="org/greenstone/util/**"/>
2802 </fileset>
2803 <manifest>
2804 <attribute name="Built-By" value="${user.name}" />
2805 </manifest>
2806 </jar>
2807 <copy file="${build.home}/gutil.jar" todir="${web.lib}"/>
2808
2809 <!-- copy the localsite server in case we need it -->
2810 <copy file="${build.home}/org/greenstone/gsdl3/${base.webservice.name}localsite.class" tofile="${web.classes}/org/greenstone/gsdl3/${base.webservice.name}localsite.class" />
2811
2812 <!-- Greenstone Administrator Interface -->
2813 <jar destfile="${build.home}/GAI.jar">
2814 <fileset dir="${build.home}">
2815 <include name="org/greenstone/admin/**"/>
2816 </fileset>
2817 <manifest>
2818 <attribute name="Built-By" value="${user.name}" />
2819 </manifest>
2820 </jar>
2821 <copy file="${build.home}/GAI.jar" todir="${web.lib}"/>
2822 <copy file="${build.home}/GAI.jar" todir="${admin.dir}"/>
2823 <jar destfile="${build.home}/phind.jar">
2824 <fileset dir="${build.home}">
2825 <include name="org/greenstone/applet/phind/**"/>
2826 </fileset>
2827 <manifest>
2828 <attribute name="Built-By" value="${user.name}" />
2829 </manifest>
2830 </jar>
2831 <mkdir dir="${web.applet}"/>
2832 <copy file="${build.home}/phind.jar" todir="${web.applet}"/>
2833 <!-- phind also needs xercesImpl.jar and xml-apis.jar to be in web/applet -->
2834 <if>
2835 <bool><istrue value="${tomcat.islocal}"/></bool>
2836 <if><bool><available file="${catalina.home}/lib/xercesImpl.jar"/></bool><!-- moved for solr -->
2837 <copy file="${catalina.home}/lib/xercesImpl.jar" todir="${web.applet}"/>
2838 <copy file="${catalina.home}/lib/xml-apis.jar" todir="${web.applet}"/>
2839
2840 <else><!-- get from default GS3 web lib location-->
2841 <copy file="${web.lib}/xercesImpl.jar" todir="${web.applet}"/>
2842 <copy file="${web.lib}/xml-apis.jar" todir="${web.applet}"/>
2843 </else>
2844 </if>
2845 </if>
2846
2847
2848 <!-- skip anttasks for now
2849 <jar destfile="${build.home}/anttasks.jar">
2850 <fileset dir="${build.home}">
2851 <include name="org/greenstone/anttasks/**"/>
2852 </fileset>
2853 <manifest>
2854 <attribute name="Built-By" value="${user.name}" />
2855 </manifest>
2856 </jar>
2857 <copy file="${build.home}/anttasks.jar" todir="${basedir}/lib/java"/>-->
2858 <jar destfile="${build.home}/gsdl3test.jar">
2859 <fileset dir="${build.home}">
2860 <include name="org/greenstone/gsdl3/**/*Test.class"/>
2861 <include name="org/greenstone/testing/**"/>
2862 </fileset>
2863 <manifest>
2864 <attribute name="Built-By" value="${user.name}" />
2865 </manifest>
2866 </jar>
2867 <jar destfile="${build.home}/server.jar">
2868 <fileset dir="${build.home}">
2869 <include name="org/greenstone/server/**"/>
2870 <include name="org/greenstone/util/**"/>
2871 </fileset>
2872 <fileset file="${basedir}/resources/java/server.properties"/>
2873 <manifest>
2874 <attribute name="Built-By" value="${user.name}"/>
2875 </manifest>
2876 </jar>
2877 <copy file="${build.home}/server.jar" todir="${basedir}"/>
2878 </target>
2879
2880 <!-- === Eclipse targets == -->
2881 <target name="setup-for-eclipse">
2882
2883 <filter token="gsdlhome" value="${gs2build.home}"/>
2884 <filter token="gsdl3srchome" value="${basedir}"/>
2885 <filter token="gsdl3home" value="${basedir}/web"/>
2886
2887 <if>
2888 <bool><not><available file="${basedir}/TransformingLibrary.launch"/></not></bool>
2889 <copy file="${basedir}/TransformingLibrary.launch.in" tofile="${basedir}/TransformingLibrary.launch" filtering="true" overwrite="true"/>
2890 </if>
2891<!--
2892 <if>
2893 <bool><not><available file="${basedir}/LibraryCommandline.launch"/></not></bool>
2894 <copy file="${basedir}/LibraryCommandline.launch.in" tofile="${basedir}/LibraryCommandline.launch" filtering="true" overwrite="true"/>
2895 </if>
2896-->
2897 </target>
2898
2899 <!-- ================== Packages targets ================================ -->
2900 <!-- these targets refer to the greenstone source packages - these need
2901 updating less often, so are in separate targets to the core -->
2902 <target name="prepare-packages" depends="init"/>
2903
2904 <target name="update-packages" depends="init,svnupdate-packages,configure-packages,clean-packages,compile-packages"
2905 description="Update only the source packages"/>
2906
2907 <target name="svnupdate-packages" unless="nosvn.mode">
2908 <exec executable="svn">
2909 <arg value="update"/>
2910 <arg value="${src.packages.home}"/>
2911 <arg value="-r"/><arg value="${branch.revision}"/>
2912 </exec>
2913 </target>
2914
2915
2916 <target name="configure-packages" depends="init,configure-javagdbm"
2917 description="Configure only the packages."/>
2918
2919 <target name="configure-javagdbm" if="with.jni">
2920 <echo>
2921 Configuring JavaGDBM
2922 </echo>
2923
2924 <exec executable="${javagdbm.home}/configure" os="${os.unix}" dir="${javagdbm.home}" failonerror="true">
2925 <arg value="--prefix=${basedir}"/>
2926 <arg value="--libdir=${lib.jni}"/>
2927 <arg value="--with-gdbm=${gdbm.home}"/>
2928 <arg line="${cross.configure.args}"/>
2929 </exec>
2930 </target>
2931
2932 <target name="clean-packages" depends="init,clean-javagdbm" description="Clean only the packages"/>
2933
2934 <target name="clean-javagdbm" depends="init">
2935 <if><bool><available file="${javagdbm.home}/Makefile"/></bool>
2936 <exec executable="make" os="${os.unix}"
2937 dir="${javagdbm.home}" failonerror="true">
2938 <arg value="clean"/>
2939 </exec>
2940 </if>
2941 </target>
2942
2943 <target name="distclean-packages" depends="init,distclean-javagdbm" description="Distclean only the packages"/>
2944
2945 <target name="distclean-javagdbm" depends="init">
2946 <if><bool><available file="${javagdbm.home}/Makefile"/></bool>
2947 <exec executable="make" os="${os.unix}"
2948 dir="${javagdbm.home}" failonerror="true">
2949 <arg value="distclean"/>
2950 </exec>
2951 </if>
2952 </target>
2953
2954 <target name="compile-packages" description="Compile only the source packages">
2955 <!-- javagdbm -->
2956 <antcall target="compile-javagdbm"/>
2957 <!-- Search4j -->
2958 <antcall target="compile-search4j"/>
2959 </target>
2960
2961 <target name="compile-javagdbm" description="Compile JavaGDBM" if="with.jni">
2962
2963 <!-- unix: -->
2964 <echo>compile javagdbm</echo>
2965 <exec executable="make" os="${os.unix}" dir="${javagdbm.home}" failonerror="true">
2966 <arg value="JAVACOPTIONS=-encoding UTF8"/>
2967 </exec>
2968 <exec executable="make" os="${os.unix}" dir="${javagdbm.home}" failonerror="true">
2969 <arg value="install"/>
2970 </exec>
2971
2972 <!-- windows: Calling without the "compile" argument first will run winMake.bat with
2973 "all" which will then perform both the compile AND link targets in jni/win32.mak
2974 (thereby also generating gdbmjava.dll). Then we run the same command with
2975 the "install" argument to copy the gdbmjava.dll into the correct location. -->
2976 <echo>Windows: compile javagdbm</echo>
2977 <exec executable="${javagdbm.home}/winMake.bat" osfamily="windows" dir="${javagdbm.home}" failonerror="true">
2978 <env key="GSDL3SRCHOME" path="${basedir}"/>
2979 </exec>
2980 <exec executable="${javagdbm.home}/winMake.bat" osfamily="windows" dir="${javagdbm.home}" failonerror="true">
2981 <env key="GSDL3SRCHOME" path="${basedir}"/>
2982 <arg value="install"/>
2983 </exec>
2984
2985 <!-- install the jar file -->
2986 <echo>Install the javagdbm jar file ${javagdbm.home}/javagdbm.jar ${lib.jni}</echo>
2987 <copy file="${javagdbm.home}/javagdbm.jar" todir="${lib.jni}"/>
2988 </target>
2989
2990 <target name="compile-search4j">
2991
2992 <!-- windows -->
2993 <if><bool><istrue value="${current.os.iswindows}"/></bool>
2994 <exec executable="nmake" dir="${src.packages.home}/search4j" failonerror="true">
2995 <arg value="/f"/>
2996 <arg value="win32.mak"/>
2997 <arg value='BINDIR="${basedir}\bin"'/>
2998 </exec>
2999 <exec executable="nmake" dir="${src.packages.home}/search4j" failonerror="true">
3000 <arg value="/f"/>
3001 <arg value="win32.mak"/>
3002 <arg value="install"/>
3003 <arg value='BINDIR="${basedir}\bin"'/>
3004 </exec>
3005
3006 <!-- unix -->
3007 <else><if><bool><istrue value="${current.os.isunix}"/></bool>
3008 <exec executable="${src.packages.home}/search4j/configure" dir="${src.packages.home}/search4j" failonerror="true">
3009 <arg value="--bindir=${basedir}/bin"/>
3010 <arg value="${static.arg}"/>
3011 <arg line="${cross.configure.args}"/>
3012 </exec>
3013 <exec executable="make" dir="${src.packages.home}/search4j" failonerror="true"/>
3014 <exec executable="make" dir="${src.packages.home}/search4j" failonerror="true">
3015 <arg value="install"/>
3016 </exec>
3017
3018 <!-- else warn -->
3019 <else>
3020 <fail>this target does not support the current os</fail>
3021
3022 </else></if></else></if>
3023
3024 </target>
3025
3026 <target name="install-auxiliary-jar-files" depends="init">
3027
3028 <if>
3029 <bool><available file="${mg.home}/mg.jar"/></bool>
3030 <copy file="${mg.home}/mg.jar" todir="${lib.jni}"/>
3031 </if>
3032
3033 <if>
3034 <bool><available file="${mgpp.home}/mgpp.jar"/></bool>
3035 <copy file="${mgpp.home}/mgpp.jar" todir="${lib.jni}"/>
3036 </if>
3037
3038 <copy file="${lucene.home}/LuceneWrapper4.jar" todir="${web.lib}"/>
3039 </target>
3040
3041 <target name="install-jni-files" depends="init" if="with.jni">
3042 <antcall target="install-jni-files-linux"/>
3043 <antcall target="install-jni-files-windows"/>
3044 <antcall target="install-jni-files-macos"/>
3045 </target>
3046
3047 <target name="install-jni-files-linux" depends="init" if="current.os.isunixnotmac">
3048
3049 <if>
3050
3051 <bool><equals arg1="${os.bin.dir}" arg2="windows"/></bool>
3052 <!-- cross compiling to windows -->
3053 <copy file="${mg.home}/jni/mgretrievejni.dll" todir="${lib.jni}"/>
3054 <copy file="${mg.home}/jni/mgsearchjni.dll" todir="${lib.jni}"/>
3055 <copy file="${mg.home}/jni/mgpassjni.dll" todir="${lib.jni}"/>
3056 <copy file="${mgpp.home}/jni/mgppretrievejni.dll" todir="${lib.jni}"/>
3057 <copy file="${mgpp.home}/jni/mgppsearchjni.dll" todir="${lib.jni}"/>
3058 <copy file="${mgpp.home}/jni/mgpppassjni.dll" todir="${lib.jni}"/>
3059
3060 <else>
3061 <!-- otherwise do the usual Unix copies -->
3062 <copy file="${mg.home}/jni/libmgretrievejni.so" todir="${lib.jni}"/>
3063 <copy file="${mg.home}/jni/libmgsearchjni.so" todir="${lib.jni}"/>
3064 <copy file="${mg.home}/jni/libmgpassjni.so" todir="${lib.jni}"/>
3065 <copy file="${mgpp.home}/jni/libmgppretrievejni.so" todir="${lib.jni}"/>
3066 <copy file="${mgpp.home}/jni/libmgppsearchjni.so" todir="${lib.jni}"/>
3067 <copy file="${mgpp.home}/jni/libmgpppassjni.so" todir="${lib.jni}"/>
3068 </else>
3069 </if>
3070
3071
3072 </target>
3073 <target name="install-jni-files-windows" depends="init" if="current.os.iswindows">
3074 <copy file="${mg.home}/jni/mgretrievejni.dll" todir="${lib.jni}"/>
3075 <copy file="${mg.home}/jni/mgsearchjni.dll" todir="${lib.jni}"/>
3076 <copy file="${mg.home}/jni/mgpassjni.dll" todir="${lib.jni}"/>
3077 <copy file="${mgpp.home}/jni/mgppretrievejni.dll" todir="${lib.jni}"/>
3078 <copy file="${mgpp.home}/jni/mgppsearchjni.dll" todir="${lib.jni}"/>
3079 <copy file="${mgpp.home}/jni/mgpppassjni.dll" todir="${lib.jni}"/>
3080 </target>
3081 <target name="install-jni-files-macos" depends="init" if="current.os.ismac">
3082 <copy file="${mg.home}/jni/libmgretrievejni.jnilib" todir="${lib.jni}"/>
3083 <copy file="${mg.home}/jni/libmgsearchjni.jnilib" todir="${lib.jni}"/>
3084 <copy file="${mg.home}/jni/libmgpassjni.jnilib" todir="${lib.jni}"/>
3085 <copy file="${mgpp.home}/jni/libmgppretrievejni.jnilib" todir="${lib.jni}"/>
3086 <copy file="${mgpp.home}/jni/libmgppsearchjni.jnilib" todir="${lib.jni}"/>
3087 <copy file="${mgpp.home}/jni/libmgpppassjni.jnilib" todir="${lib.jni}"/>
3088 </target>
3089
3090 <!-- ========common-src targets =================================-->
3091 <!-- these are used to get common-src (for indexers, gdbm, sqlite etc) when
3092 collection building is not enabled -->
3093
3094 <target name="update-common-src" depends="init" if="collection.building.disabled">
3095 </target>
3096
3097 <target name="svnupdate-common-src" depends="init" if="collection.building.disabled" unless="nosvn.mode">
3098 <exec executable="svn">
3099 <arg value="update"/>
3100 <arg value="${common.src.home}"/>
3101 <arg value="-r"/><arg value="${branch.revision}"/>
3102 </exec>
3103 </target>
3104
3105 <target name="prepare-common-src" depends="init" if="collection.building.disabled" unless="common.src.present">
3106 <antcall target="checkout-common-src"/>
3107 <antcall target="unzip-windows-packages"/>
3108 </target>
3109
3110 <target name="checkout-common-src" depends="init" if="collection.building.disabled" unless="nosvn.mode">
3111 <echo>checking out common-src</echo>
3112 <exec executable="svn">
3113 <arg value="checkout"/>
3114 <arg value="${svn.root}/main/${branch.path}/greenstone2/common-src"/>
3115 <arg value="common-src"/>
3116 <arg value="-r"/><arg value="${branch.revision}"/>
3117 </exec>
3118 </target>
3119
3120 <target name="configure-common-src" depends="init">
3121<!--
3122 <echo>cross configure args: ${cross.configure.args}</echo>
3123-->
3124 <exec executable="${common.src.home}/configure" os="${os.unix}"
3125 dir="${common.src.home}" failonerror="true">
3126 <arg value="--prefix=${gs2build.home}"/> <!-- what value to use?? -->
3127 <arg value="--bindir=${gs2build.home}/bin/${os.bin.dir}"/> <!-- what value to use?? -->
3128 <arg line="${gs2.opt.args}"/>
3129 <arg line="${static.arg}"/>
3130 <arg line="${cross.configure.args}"/>
3131 <arg line="${allargs}"/>
3132 </exec>
3133 </target>
3134
3135 <target name="clean-common-src" depends="init">
3136 <!-- unix: -->
3137 <if><bool><available file="${common.src.home}/Makefile"/></bool>
3138 <exec executable="make" os="${os.unix}" dir="${common.src.home}" failonerror="true">
3139 <arg value="clean"/>
3140 </exec>
3141 </if>
3142 <!-- windows: -->
3143 <exec executable="nmake" dir="${common.src.home}" osfamily="windows" failonerror="true">
3144 <arg value="/f"/>
3145 <arg value="win32.mak"/>
3146 <arg value="clean"/>
3147 <arg value="GSDLHOME=${gs2build.home}"/>
3148 </exec>
3149 </target>
3150 <target name="distclean-common-src" depends="init">
3151 <!-- unix: -->
3152 <if><bool><available file="${common.src.home}/Makefile"/></bool>
3153 <exec executable="make" os="${os.unix}" dir="${common.src.home}" failonerror="true">
3154 <arg value="distclean"/>
3155 </exec>
3156 </if>
3157 <!-- windows: distclean = clean + remove configure products (remove makefiles). But on Windows there is no removing makefiles, so we just call clean -->
3158 <exec executable="nmake" dir="${common.src.home}" osfamily="windows" failonerror="true">
3159 <arg value="/f"/>
3160 <arg value="win32.mak"/>
3161 <arg value="clean"/>
3162 <arg value="GSDLHOME=${gs2build.home}"/>
3163 </exec>
3164 </target>
3165 <target name="compile-common-src" depends="init">
3166 <!-- unix: -->
3167 <exec executable="make" os="${os.unix}" dir="${common.src.home}" failonerror="true">
3168 <arg value="${gs2.compile.target}"/>
3169 </exec>
3170 <!-- windows: -->
3171 <exec executable="nmake" dir="${common.src.home}" osfamily="windows" failonerror="true">
3172 <arg value="/f"/>
3173 <arg value="win32.mak"/>
3174 <arg value="GSDLHOME=${gs2build.home}"/>
3175 <arg value="ENABLE_JNI=${gs2.windows.enablejni}"/>
3176 <arg value="ENABLE_MG=${gs2.windows.enablemg}"/>
3177 <arg value="ENABLE_MGPP=${gs2.windows.enablemgpp}"/>
3178 <arg value="USE_GDBM=${gs2.windows.usegdbm}"/>
3179 <arg value="USE_SQLITE=${gs2.windows.usesqlite}"/>
3180 </exec>
3181 </target>
3182
3183 <!-- ======= collection-building targets ===========================-->
3184
3185 <target name="update-collection-building" if="collection.building.enabled"
3186 depends="init,svnupdate-collection-building,gs2build-edit-setup-bat,configure-common-src,clean-common-src,compile-common-src,configure-collection-building,clean-collection-building,compile-collection-building"
3187 description="Update (SVN update, configure, compile etc) only the collection building components"/>
3188
3189 <target name="svnupdate-collection-building" if="collection.building.enabled" depends="init,svnupdate-gs2build,svnupdate-cgi,svnupdate-gli" unless="nosvn.mode"
3190 description="SVN update the collection building components">
3191 </target>
3192
3193 <target name="prepare-collection-building" depends="init,prepare-gs2build,svnupdate-cgi,prepare-gli" if="collection.building.enabled">
3194 </target>
3195
3196 <target name="configure-collection-building" depends="init,configure-build-src" if="collection.building.enabled"
3197 description="Configure the collection building components">
3198 </target>
3199
3200 <target name="clean-collection-building" depends="init,clean-gli,clean-build-src"
3201 description="Clean only the collection building components"
3202 if="collection.building.enabled"/>
3203
3204 <target name="distclean-collection-building" depends="init,clean-build-src,distclean-build-src"
3205 description="Distclean only the collection building components"
3206 if="collection.building.enabled"/>
3207
3208 <target name="compile-collection-building" depends="init,compile-build-src,compile-gli" if="collection.building.enabled"
3209 description="Compile only the collection building components">
3210 <!-- make install for common-src -->
3211 <!-- unix: -->
3212 <exec executable="make" os="${os.unix}" dir="${common.src.home}" failonerror="true">
3213 <arg value="${gs2.install.target}"/>
3214 </exec>
3215
3216 <!-- windows: -->
3217 <exec executable="nmake" dir="${common.src.home}" osfamily="windows" failonerror="true">
3218 <arg value="/f"/>
3219 <arg value="win32.mak"/>
3220 <arg value="install"/>
3221 <arg value="GSDLHOME=${gs2build.home}"/>
3222 <arg value="ENABLE_JNI=${gs2.windows.enablejni}"/>
3223 <arg value="ENABLE_MG=${gs2.windows.enablemg}"/>
3224 <arg value="ENABLE_MGPP=${gs2.windows.enablemgpp}"/>
3225 <arg value="USE_GDBM=${gs2.windows.usegdbm}"/>
3226 <arg value="USE_SQLITE=${gs2.windows.usesqlite}"/>
3227 <!--
3228 <arg value="ENABLE_JNI=${gs2.windows.enablejni}"/>
3229 <arg value="USE_SQLITE=0"/>--> <!-- why is this not on by default? -->
3230 </exec>
3231
3232 <!-- install gs2build indexers for windows -->
3233 <if>
3234 <bool><istrue value="${current.os.iswindows}"/></bool>
3235 <copy todir="${gs2build.home}/bin/windows">
3236 <fileset dir="${gs2build.home}/common-src/indexers/bin">
3237 <include name="*.*"/>
3238 </fileset>
3239 </copy>
3240 </if>
3241
3242 <!-- LuceneWrapper jar file not installed by default -->
3243 <mkdir dir="${gs2build.home}/bin/java"/>
3244 <copy file="${lucene.home}/LuceneWrapper4.jar" todir="${gs2build.home}/bin/java"/>
3245
3246 </target>
3247
3248 <!-- ============== gli targets ================================= -->
3249
3250 <!-- gliserver.pl, gsdlCGI.pm, metadata-server.pl and checksum.pl are updated alongside
3251 this in target svnupdate-collection-building -->
3252 <target name="svnupdate-gli" if="collection.building.enabled" depends="init" unless="nosvn.mode">
3253
3254 <exec executable="svn">
3255 <arg value="update"/>
3256 <arg value="${gli.home}"/>
3257 <arg value="-r"/><arg value="${branch.revision}"/>
3258 </exec>
3259
3260 </target>
3261
3262 <!-- gliserver.pl, gsdlCGI.pm, metadata-server.pl and checksum.pl are updated
3263 alongside this prepare-gli target in target prepare-collection-building -->
3264 <target name="prepare-gli" depends="init" if="collection.building.enabled" unless="gli.present">
3265 <!-- checkout -->
3266 <if><bool><and><not><istrue value="${nosvn.mode}"/></not><isset property="with.gli.and.gems"/></and></bool>
3267
3268 <exec executable="svn">
3269 <arg value="checkout"/>
3270 <arg value="${svn.root}/main/${branch.path}/gli"/>
3271 <arg value="-r"/><arg value="${branch.revision}"/>
3272 </exec>
3273
3274 </if>
3275 </target>
3276
3277 <!-- svn checkout gliserver.pl, gsdlCGI.pm for gli applet, as well as gsdlCGI.pm-dependent metadata-server.pl
3278 (checksum.pl is used by GS2 for depositdspace.dm and may eventually be used by GS3 too) -->
3279 <target name="svnupdate-cgi">
3280
3281 <exec executable="svn" dir="web/WEB-INF/cgi">
3282 <arg value="export"/>
3283 <arg value="-r"/><arg value="${branch.revision}"/>
3284 <arg value="${svn.root}/main/${branch.path}/greenstone2/common-src/cgi-bin/gliserver.pl"/>
3285 </exec>
3286 <exec executable="svn" dir="web/WEB-INF/cgi">
3287 <arg value="export"/>
3288 <arg value="-r"/><arg value="${branch.revision}"/>
3289 <arg value="${svn.root}/main/${branch.path}/greenstone2/common-src/cgi-bin/gsdlCGI.pm"/>
3290 </exec>
3291 <exec executable="svn" dir="web/WEB-INF/cgi">
3292 <arg value="export"/>
3293 <arg value="-r"/><arg value="${branch.revision}"/>
3294 <arg value="${svn.root}/main/${branch.path}/greenstone2/common-src/cgi-bin/metadata-server.pl"/>
3295 </exec>
3296 <exec executable="svn" dir="web/WEB-INF/cgi">
3297 <arg value="export"/>
3298 <arg value="-r"/><arg value="${branch.revision}"/>
3299 <arg value="${svn.root}/main/${branch.path}/greenstone2/common-src/cgi-bin/checksum.pl"/>
3300 </exec>
3301 </target>
3302
3303
3304 <target name="clean-gli" depends="init" if="collection.building.enabled">
3305 <!-- gli -->
3306 <property name="gli.home" value="${basedir}/gli"/>
3307 <!-- linux -->
3308 <exec executable="clean.sh" os="${os.unix}" dir="${gli.home}"
3309 resolveExecutable="true" failonerror="true"/>
3310 <!-- windows -->
3311 <exec executable="clean.bat" osfamily="windows" dir="${gli.home}"
3312 resolveExecutable="true" failonerror="true"/>
3313 </target>
3314
3315 <target name="compile-gli" depends="init" if="collection.building.enabled">
3316 <if><bool><isset property="with.gli.and.gems"/></bool>
3317 <!-- gli -->
3318 <property name="gli.home" value="${basedir}/gli"/>
3319
3320 <!-- linux -->
3321 <exec executable="makegli.sh" os="${os.unix}" dir="${gli.home}" resolveExecutable="true" failonerror="true"/>
3322 <!--remote gli-->
3323 <exec executable="makejar.sh" os="${os.unix}" dir="${gli.home}"
3324 resolveExecutable="true" failonerror="true"/>
3325 <!-- windows -->
3326 <exec executable="makegli.bat" osfamily="windows" dir="${gli.home}" resolveExecutable="true" failonerror="true"/>
3327 <!--remote gli-->
3328 <exec executable="makejar.bat" osfamily="windows" dir="${gli.home}"
3329 resolveExecutable="true" failonerror="true"/>
3330 <copy file="${gli.home}/GLIServer.jar" todir="${gs2build.home}/bin/java" />
3331 </if>
3332 </target>
3333
3334 <target name="gli" description="Run the Greenstone Librarian Interface" depends="init" if="collection.building.enabled">
3335 <exec executable="${basedir}/gli/gli.sh" os="${os.linux},${os.solaris}" dir="${basedir}/gli" spawn="true">
3336 <env key="gsdl3path" path="${basedir}"/>
3337 <env key="gsdlpath" path="${gs2build.home}"/>
3338 </exec>
3339 <exec executable="${basedir}/gli/gli.sh" os="${os.mac}" dir="${basedir}/gli" spawn="true">
3340 <env key="gsdl3path" path="${basedir}"/>
3341 <env key="gsdlpath" path="${gs2build.home}"/>
3342 <env key="DYLD_LIBRARY_PATH" path="${env.DYLD_LIBRARY_PATH}:${gdbm.home}/lib"/>
3343 </exec>
3344 <exec executable="${basedir}/gli/gli.bat" osfamily="windows" dir="${basedir}/gli" spawn="true">
3345 <env key="GSDL3PATH" path="${basedir}"/>
3346 <env key="GSDLPATH" path="${gs2build.home}"/>
3347 </exec>
3348 <echo>Running GLI from Ant means that you don't get to see any of the terminal output. If you have problems with GLI and want to see the output, please run the script gli.sh/bat from the greenstone3/gli directory.
3349 </echo>
3350 </target>
3351
3352 <!-- ================ gs2build targets =========================== -->
3353
3354 <target name="svnupdate-gs2build" if="collection.building.enabled" depends="init" unless="nosvn.mode">
3355 <echo>svn updating gs2build</echo>
3356 <exec executable="svn">
3357 <arg value="update"/>
3358 <arg value="${gs2build.home}"/>
3359 <arg value="-r"/><arg value="${branch.revision}"/>
3360 </exec>
3361 </target>
3362
3363 <target name="prepare-gs2build" depends="init" if="collection.building.enabled" unless="gs2build.present">
3364 <antcall target="checkout-gs2build"/>
3365 <antcall target="prepare-pdfbox"/>
3366 <antcall target="prepare-imagemagick"/> <!-- has to be done before calling prepare-gnome-lib -->
3367 <antcall target="prepare-gnome-lib"/>
3368 <antcall target="unzip-windows-packages"/>
3369 <antcall target="checkout-winbin"/>
3370 <antcall target="get-windows-binaries"/>
3371 <antcall target="delete-winbin"/>
3372 </target>
3373
3374 <target name="checkout-gs2build" depends="init" if="collection.building.enabled" unless="nosvn.mode">
3375 <echo>checking out gs2build</echo>
3376 <exec executable="svn">
3377 <arg value="checkout"/>
3378 <arg value="${svn.root}/main/${branch.path}/gs2build"/>
3379 <arg value="-r"/><arg value="${branch.revision}"/>
3380 </exec>
3381 </target>
3382
3383 <!-- Gets the PDFBox extension into gs2build/ext if checkout.pdfbox.ext is set to true in build.properties
3384 (which it is by default) -->
3385 <target name="prepare-pdfbox" depends="init" if="collection.building.enabled">
3386 <if>
3387 <bool>
3388 <istrue value="${checkout.pdfbox.ext}"/>
3389 </bool>
3390
3391 <property name="pdfbox.ext.dir" value="${gs2build.home}/ext/pdf-box"/>
3392 <condition property="pdfbox.ext.present">
3393 <available file="${pdfbox.ext.dir}" type="dir" />
3394 </condition>
3395
3396 <!-- get the pdfbox tar.gz file if we don't already have it and extract it if there's no pdf-box directory in gs2build/ext-->
3397 <if>
3398 <bool>
3399 <not><istrue value="${pdfbox.ext.present}"/></not>
3400 </bool>
3401
3402 <if>
3403 <bool>
3404 <not><istrue value="${gs2build.home}/ext/pdf-box-java.tar.gz"/></not>
3405 </bool>
3406
3407 <echo>Checking out the PDFBox extension into the GSDLHOME extension area</echo>
3408 <exec executable="svn">
3409 <arg value="export"/>
3410 <arg value="${svn.root}/gs2-extensions/pdf-box/trunk/pdf-box-java.tar.gz"/>
3411 <arg value="${gs2build.home}/ext/pdf-box-java.tar.gz"/>
3412 </exec>
3413 </if>
3414
3415 <echo>Extacting the PDFBox extension into the GSDLHOME extension area</echo>
3416 <untar compression="gzip"
3417 src="${gs2build.home}/ext/pdf-box-java.tar.gz"
3418 dest="${gs2build.home}/ext"/>
3419
3420 <delete file="${gs2build.home}/ext/pdf-box-java.tar.gz"/>
3421
3422 <else>
3423 <echo>The PDFBox extension already exists at ${pdfbox.ext.dir}</echo>
3424 </else>
3425 </if>
3426
3427 <else>
3428 <echo>**** Not preparing the PDFBox extension:</echo>
3429 <echo>The property checkout.pdfbox.ext in build.properties was not set or was set to false</echo>
3430 </else>
3431 </if>
3432 </target>
3433
3434 <target name="prepare-imagemagick" depends="init" if="collection.building.enabled">
3435 <if>
3436 <bool>
3437 <istrue value="${checkout.imagemagick.ext}"/>
3438 </bool>
3439
3440 <antcall target="checkout-imagemagick"/>
3441 <!--Compilation of imagemagick now happens during ant install, still before configuring the src code, as before -->
3442
3443 <else>
3444 <echo>**** Not preparing imagemagick:</echo>
3445 <echo>property checkout.imagemagick.ext in build.properties was not set or was set to false</echo>
3446 </else>
3447 </if>
3448 </target>
3449
3450 <target name="checkout-imagemagick" depends="init" if="collection.building.enabled" unless="nosvn.mode">
3451
3452 <property name="imagemagick.src.dir" value="${gs2build.home}/ext/imagemagick"/>
3453 <condition property="imagemagick.src.present">
3454 <available file="${imagemagick.src.dir}" type="dir" />
3455 </condition>
3456
3457 <if>
3458 <bool>
3459 <not><istrue value="${imagemagick.src.present}"/></not>
3460 </bool>
3461
3462 <echo>checking out imagemagick source into the extension area</echo>
3463
3464 <exec executable="svn">
3465 <arg value="checkout"/>
3466 <arg value="${svn.root}/gs2-extensions/imagemagick/trunk/src"/>
3467 <arg value="${imagemagick.src.dir}"/>
3468 </exec>
3469
3470 <else>
3471 <echo>imagemagick source code already exists at ${imagemagick.src.dir}</echo>
3472 </else>
3473 </if>
3474 </target>
3475
3476 <!-- Compile up imagemagick src folder if: the checkout.imagemagick.ext flag is turned on, if the imagick source code exists and if hasn't already been compiled up, then compile it up. Later can check if a gs-specific binary version has been installed already, in which case compilation won't be necessary. -->
3477 <target name="compile-imagemagick" if="checkout.imagemagick.ext">
3478
3479 <property name="imagemagick.src.dir" value="${gs2build.home}/ext/imagemagick"/>
3480 <property name="imagemagick.compiled.dir" value="${gs2build.home}/ext/imagemagick/${os.bin.dir}"/>
3481
3482 <condition property="imagemagick.src.present.firstcheck">
3483 <available file="${imagemagick.src.dir}" type="dir" />
3484 </condition>
3485 <condition property="imagemagick.compiled.present">
3486 <available file="${imagemagick.compiled.dir}" type="dir"/>
3487 </condition>
3488 <!--<condition property="imagemagick.bin.present">
3489 <available file="${basedir}/wherever/the/imgmagick/binary/is/to/be/found" type="dir" />
3490 </condition>-->
3491
3492 <!-- imagemagick will only be checked out if the user set the checkout.imagemagick.ext in build.properties -->
3493 <if>
3494 <bool>
3495 <isfalse value="${imagemagick.src.present.firstcheck}"/>
3496 </bool>
3497 <antcall target="checkout-imagemagick"/>
3498 </if>
3499
3500 <!-- keep track of whether the imagemagick src is now indeed present. Need to know this for a subsequent test -->
3501 <condition property="imagemagick.src.present">
3502 <available file="${imagemagick.src.dir}" type="dir" />
3503 </condition>
3504
3505 <if>
3506 <bool>
3507 <and>
3508 <istrue value="${imagemagick.src.present}"/> <!-- imagemagick src code is present -->
3509 <isfalse value="${imagemagick.compiled.present}"/> <!-- imagemagick src not compiled yet, so no imagemagick/os subfolder yet -->
3510 </and>
3511 </bool>
3512 <!-- then compile it. Only necessary for mac/linux, since windows has a stable working binary of imagemagick -->
3513 <exec executable="/bin/bash" dir="${imagemagick.src.dir}" failonerror="true">
3514 <arg value="CASCADE-MAKE.sh"/>
3515 </exec>
3516 </if>
3517 </target>
3518
3519
3520 <!-- Compile up gnome-lib src folder if: checkout.gnomelib.ext is turned on, and if not using the binary
3521 version (gnome-lib-minimal), and if the gnome-lib src folder is not already compiled up. -->
3522 <target name="compile-gnome-lib" if="checkout.gnomelib.ext">
3523
3524 <!-- http://stackoverflow.com/questions/3290307/sourcing-a-shell-profile-in-an-ant-build-file
3525 TODO: CASCADE-MAKE already sources devel.bash, but we still want to source it more globally,
3526 so that the rest of the GS3 compilation process also has access to those env variables -->
3527
3528 <property name="gnome.lib.src.dir" value="${basedir}/gs2build/ext/gnome-lib"/>
3529 <property name="gnome.lib.compiled.dir" value="${basedir}/gs2build/ext/gnome-lib/${os.bin.dir}"/>
3530
3531 <condition property="gnome.src.lib.present.firstcheck" value="true" else="false">
3532 <available file="${gnome.lib.src.dir}" type="dir" />
3533 </condition>
3534 <condition property="gnome.compiled.lib.present" value="true" else="false">
3535 <available file="${gnome.lib.compiled.dir}" type="dir"/>
3536 </condition>
3537 <condition property="gnome.lib.min.present" value="true" else="false">
3538 <available file="${basedir}/gs2build/ext/gnome-lib-minimal" type="dir" />
3539 </condition>
3540
3541 <!-- Make sure to checkout gnome-lib if it was not checked out at this stage
3542 since we're instructed to do so in th pre-condition to this target -->
3543 <if>
3544 <bool>
3545 <and>
3546 <isfalse value="${gnome.lib.min.present}"/>
3547 <isfalse value="${gnome.src.lib.present.firstcheck}"/>
3548 </and>
3549 </bool>
3550 <antcall target="checkout-gnome-lib"/>
3551 </if>
3552
3553 <!-- Keep track of whether we have the gnome-lib src folder now. Need to know this for a subsequent test -->
3554 <condition property="gnome.src.lib.present" value="true" else="false">
3555 <available file="${gnome.lib.src.dir}" type="dir" />
3556 </condition>
3557
3558 <!--<echo>MIN: ${gnome.lib.min.present}
3559 SRC LIB: ${gnome.src.lib.present}
3560 COMPILED: ${gnome.compiled.lib.present}</echo>-->
3561
3562 <if>
3563 <bool>
3564 <and>
3565 <isfalse value="${gnome.lib.min.present}"/> <!-- no gnome-lib-minimal binary present -->
3566 <istrue value="${gnome.src.lib.present}"/> <!-- gnome-lib folder for compilation is present-->
3567 <isfalse value="${gnome.compiled.lib.present}"/> <!-- gnome-lib not yet compiled, so no gnome-lib/os subfolder yet -->
3568 </and>
3569 </bool>
3570
3571 <!-- then compile it. Only necessary for mac/linux, since windows doesn't need gnome lib -->
3572 <exec executable="/bin/bash" dir="${gnome.lib.src.dir}" failonerror="true">
3573 <arg value="CASCADE-MAKE.sh"/>
3574 </exec>
3575 </if>
3576 </target>
3577
3578
3579 <target name="prepare-gnome-lib" depends="init" if="collection.building.enabled" unless="gnome-lib.present">
3580 <if>
3581 <bool>
3582 <istrue value="${checkout.gnomelib.ext}"/>
3583 </bool>
3584
3585 <antcall target="checkout-gnome-lib"/>
3586 <!--Compilation of gnome-lib happens during ant install, just before configuring (common-src and) build-src-->
3587
3588 <else>
3589 <echo>**** Not preparing gnome-lib:</echo>
3590 <echo>property checkout.gnomelib.ext in build.properties was not set or was set to false</echo>
3591 </else>
3592 </if>
3593 </target>
3594
3595
3596 <target name="checkout-gnome-lib" depends="init" if="collection.building.enabled" unless="nosvn.mode">
3597
3598 <property name="gnomelib.src.dir" value="${basedir}/gs2build/ext/gnome-lib"/>
3599 <condition property="gnome.src.present">
3600 <available file="${gnomelib.src.dir}" type="dir" />
3601 </condition>
3602
3603 <if>
3604 <bool>
3605 <not><istrue value="${gnome.src.present}"/></not>
3606 </bool>
3607
3608 <echo>checking out gnome-lib extension</echo>
3609 <exec executable="svn">
3610 <arg value="checkout"/>
3611 <arg value="${svn.root}/gs2-extensions/gnome-lib/trunk/src"/>
3612 <arg value="${gs2build.home}/ext/gnome-lib"/>
3613 </exec>
3614
3615 <else>
3616 <echo>gnomelib source code already exists at ${gnomelib.src.dir}</echo>
3617 </else>
3618 </if>
3619
3620 </target>
3621
3622 <target name="checkout-winbin" depends="init" if="current.os.iswindows"
3623 unless="nosvn.mode">
3624
3625 <exec executable="svn">
3626 <arg value="checkout"/>
3627 <arg value="${svn.root}/main/${branch.path}/binaries/windows"/>
3628 <arg value="-r"/><arg value="${branch.revision}"/>
3629 <arg value="winbin"/>
3630 </exec>
3631
3632 </target>
3633
3634 <target name="update-winbin" depends="init" if="current.os.iswindows" unless="nosvn.mode">
3635 <exec executable="svn">
3636 <arg value="update"/>
3637 <arg value="winbin"/>
3638 <arg value="-r"/><arg value="${branch.revision}"/>
3639 </exec>
3640
3641 </target>
3642
3643 <target name="get-windows-binaries" depends="init" if="collection.building.enabled.windows">
3644 <move todir="${gs2build.home}/bin/windows" failonerror="false">
3645 <fileset dir="${basedir}/winbin/bin"/>
3646 </move>
3647 </target>
3648
3649 <target name="delete-winbin" depends="init" if="collection.building.enabled.windows">
3650 <delete dir="${basedir}/winbin"/>
3651 </target>
3652
3653 <target name="unzip-windows-packages" depends="init" if="current.os.iswindows">
3654 <unzip src="${common.src.home}/packages/windows/crypt/crypt.zip"
3655 dest="${common.src.home}/packages/windows/crypt"/>
3656 <untar compression="gzip"
3657 src="${common.src.home}/packages/sqlite/${sqlite.targz.version}"
3658 dest="${common.src.home}/packages/sqlite"/>
3659 <unzip src="${common.src.home}/indexers/packages/windows/iconv/iconv.zip"
3660 dest="${common.src.home}/indexers/packages/windows/iconv"/>
3661 </target>
3662
3663 <target name="gs2build-edit-setup-bat" if="collection.building.enabled.windows">
3664 <!-- we want a windows path in the setup.bat file -->
3665 <pathconvert targetos="windows" property="gs2build.home.windows">
3666 <path path="${gs2build.home}"/>
3667 </pathconvert>
3668 <move file="${gs2build.home}/setup.bat" tofile="${gs2build.home}/setup-tmp.bat">
3669 <filterset>
3670 <filter token="gsdlhome" value="${gs2build.home.windows}"/>
3671 </filterset>
3672 </move>
3673 <move file="${gs2build.home}/setup-tmp.bat" tofile="${gs2build.home}/setup.bat" />
3674 </target>
3675
3676
3677 <target name="clean-build-src" depends="init" if="collection.building.enabled">
3678 <!-- unix: -->
3679 <if><bool><available file="${build.src.home}/Makefile"/></bool>
3680 <exec executable="make" os="${os.unix}" dir="${build.src.home}" failonerror="true">
3681 <arg value="clean"/>
3682 </exec>
3683 </if>
3684 <!-- windows: -->
3685 <exec executable="nmake" dir="${build.src.home}" osfamily="windows" failonerror="true">
3686 <arg value="/f"/>
3687 <arg value="win32.mak"/>
3688 <arg value="clean"/>
3689 <arg value="GSDLHOME=${gs2build.home}"/>
3690 </exec>
3691 </target>
3692
3693
3694 <target name="distclean-build-src" depends="init,clean-build-src" if="collection.building.enabled">
3695 <!-- unix: -->
3696 <if><bool><available file="${build.src.home}/Makefile"/></bool>
3697 <exec executable="make" os="${os.unix}" dir="${build.src.home}" failonerror="true">
3698 <arg value="distclean"/>
3699 </exec>
3700 </if>
3701 <!-- windows: distclean = clean + remove configure products (remove makefiles). But on Windows there is no removing makefiles, so we just call clean -->
3702 <exec executable="nmake" dir="${build.src.home}" osfamily="windows" failonerror="true">
3703 <arg value="/f"/>
3704 <arg value="win32.mak"/>
3705 <arg value="clean"/>
3706 <arg value="GSDLHOME=${gs2build.home}"/>
3707 </exec>
3708 </target>
3709
3710 <target name="configure-build-src" depends="init" if="collection.building.enabled"
3711 description="Configure the build-src component">
3712 <exec executable="${build.src.home}/configure" os="${os.unix}"
3713 dir="${build.src.home}" failonerror="true">
3714 <arg value="--prefix=${gs2build.home}"/>
3715 <arg line="${gs2.opt.args} ${static.arg} ${cross.configure.args} ${allargs}"/>
3716 </exec>
3717 </target>
3718
3719 <!-- common-src is done separately and needs to be compiled first -->
3720 <target name="compile-build-src" depends="init" if="collection.building.enabled">
3721
3722 <exec executable="make" dir="${build.src.home}" os="${os.unix}" failonerror="true">
3723 <arg line="${ldlpath.arg}"/>
3724 </exec>
3725
3726 <exec executable="make" dir="${build.src.home}" os="${os.unix}" failonerror="true">
3727 <arg value="install"/>
3728 </exec>
3729
3730 <!-- run the setup script -->
3731 <!-- <exec executable="${compile.windows.c++.setup}" osfamily="windows" failonerror="true"/>-->
3732 <!--Above does not work: even though vcvars.bat executes, the env changes it makes don't get saved. Need user to run vcvars.bat first before calling ant-->
3733 <exec executable="nmake" dir="${build.src.home}" osfamily="windows" failonerror="true">
3734 <arg value="/f"/>
3735 <arg value="win32.mak"/>
3736 <arg value="GSDLHOME=${gs2build.home}"/>
3737 </exec>
3738 <exec executable="nmake" dir="${build.src.home}" osfamily="windows" failonerror="true">
3739 <arg value="/f"/>
3740 <arg value="win32.mak"/>
3741 <arg value="install"/>
3742 <arg value="GSDLHOME=${gs2build.home}"/>
3743 </exec>
3744 </target>
3745
3746
3747 <!-- ======================== TESTING Targets ========================= -->
3748
3749 <target name="test" description="Run the (incomplete) JUnit test suite "
3750 depends="init">
3751 <mkdir dir="${basedir}/test"/>
3752 <junit printsummary="withOutAndErr"
3753 errorproperty="test.failed"
3754 failureproperty="test.failed"
3755 fork="${junit.fork}">
3756 <formatter type="plain"/>
3757 <classpath>
3758 <pathelement location="${build.home}/gsdl3test.jar"/>
3759 <path refid="compile.classpath"/>
3760 </classpath>
3761 <test name="${testcase}" if="testcase"/>
3762 <batchtest todir="${basedir}/test" unless="testcase">
3763 <fileset dir="${build.home}" includes="**/*Test.class" />
3764 </batchtest>
3765 </junit>
3766 <echo>
3767 *********************************************
3768 Test output can be found in directory 'test'
3769 *********************************************
3770 </echo>
3771 </target>
3772
3773 <!-- ======================== FLAX Targets ========================= -->
3774 <target name="prepare-flax" description="check out flax source code from another repository" if="install.flax">
3775 <echo>checking out flax ...</echo>
3776 <mkdir dir="${basedir}/src/java/org/flax"/>
3777 <mkdir dir="${basedir}/src/java/org/greenstone/gsdl3/flax"/>
3778 <mkdir dir="${basedir}/src/java/org/greenstone/gsdl3/action/flax"/>
3779 <mkdir dir="${web.home}/WEB-INF/classes/flax"/>
3780 <mkdir dir="${web.home}/interfaces/flax"/>
3781 <mkdir dir="${web.home}/sites/flax"/>
3782 <mkdir dir="${basedir}/flax-resources"/>
3783 <mkdir dir="${basedir}/flax-lib"/>
3784 <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/src/java/org/flax"/>
3785 <arg value="src/java/org/flax"/></exec>
3786 <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/src/java/org/greenstone/gsdl3/flax"/>
3787 <arg value="src/java/org/greenstone/gsdl3/flax"/></exec>
3788 <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/src/java/org/greenstone/gsdl3/action/flax"/>
3789 <arg value="src/java/org/greenstone/gsdl3/action/flax"/></exec>
3790 <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/web/WEB-INF/classes/flax"/>
3791 <arg value="${web.home}/WEB-INF/classes/flax"/></exec>
3792 <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/web/interfaces/flax"/>
3793 <arg value="${web.home}/interfaces/flax"/></exec>
3794 <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/web/sites/flax"/>
3795 <arg value="${web.home}/sites/flax"/></exec>
3796 <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/flax-resources"/>
3797 <arg value="flax-resources"/></exec>
3798 <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/lib"/>
3799 <arg value="flax-lib"/></exec>
3800 <antcall target="flax-copy-del-files" />
3801 </target>
3802
3803 <target name="flax-copy-del-files" description="copy some flax files into the appropriate greenstone3 directories and delete some unwanted greenstone stuff">
3804 <copy file="${web.home}/WEB-INF/classes/flax/web.xml" todir="${web.home}/WEB-INF" overwrite="true" />
3805 <copy todir="${web.home}/WEB-INF/lib">
3806 <fileset dir="${basedir}/flax-lib">
3807 <include name="*.jar"/>
3808 </fileset>
3809 </copy>
3810 <!--<delete dir="${web.home}/sites/gateway"/>
3811 <delete dir="${web.home}/sites/localsite"/>-->
3812 </target>
3813
3814 <target name="update-flax" description="update flax from repository">
3815 <echo>updating flax ...</echo>
3816 <exec executable="svn"><arg value="update"/>
3817 <arg value="src/java/org/flax"/></exec>
3818 <exec executable="svn"><arg value="update"/>
3819 <arg value="src/java/org/greenstone/gsdl3/action/flax"/></exec>
3820 <exec executable="svn"><arg value="update"/>
3821 <arg value="src/java/org/greenstone/gsdl3/flax"/></exec>
3822 <exec executable="svn"><arg value="update"/>
3823 <arg value="${web.home}/WEB-INF/classes/flax"/></exec>
3824 <exec executable="svn"><arg value="update"/>
3825 <arg value="${web.home}/interfaces/flax"/></exec>
3826 <exec executable="svn"><arg value="update"/>
3827 <arg value="${web.home}/web/sites/flax"/></exec>
3828 <exec executable="svn"><arg value="update"/>
3829 <arg value="flax-resources"/></exec>
3830 <exec executable="svn"><arg value="update"/>
3831 <arg value="flax-lib"/></exec>
3832 <antcall target="compile-core" />
3833 </target>
3834
3835 <!-- ========================End of FLAX Targets ========================= -->
3836
3837 <target name="compile-javadocs">
3838 <javadoc packagenames="org.greenstone.*"
3839 sourcepath="src/java"
3840 defaultexcludes="yes"
3841 destdir="docs/javadoc"
3842 author="true"
3843 version="true"
3844 use="true"
3845 windowtitle="Greenstone3 API">
3846 <doctitle><![CDATA[<h1>Greenstone3 API</h1>]]></doctitle>
3847 </javadoc>
3848 </target>
3849
3850<!-- ========== Some distribution targets ======================== -->
3851 <target name="remove-source">
3852 <if><bool><isset property="with.gli.and.gems"/></bool>
3853 <delete includeEmptyDirs="true">
3854 <fileset dir="." defaultexcludes="false">
3855 <patternset refid="greenstone3.source.component"/>
3856 </fileset>
3857 </delete>
3858
3859 <else>
3860 <delete includeEmptyDirs="true">
3861 <fileset dir="." defaultexcludes="false">
3862 <patternset refid="greenstone3.source.no.gli.component"/>
3863 </fileset>
3864 </delete>
3865 </else>
3866 </if>
3867 </target>
3868
3869 <target name="dist-tidy"
3870 description="'tidies-up' a greenstone3 installation for distribution."
3871 unless="${properties.keep.src}">
3872
3873 <!-- delete unneeded things -->
3874 <delete dir="${packages.home}/axis"/>
3875 <delete><fileset dir="${packages.home}" includes="*.zip"/></delete>
3876 <delete file="README-SVN.txt"/>
3877 <delete file="build.properties.svn"/>
3878
3879 <!-- delete source files -->
3880 <antcall target="remove-source"/>
3881
3882 <!-- create empty directories -->
3883 <mkdir dir="${web.writablehome}/applet"/>
3884 <mkdir dir="${web.writablehome}/logs"/>
3885 <mkdir dir="${web.writablehome}/logs/tmp"/>
3886
3887 <!-- Lines with ***** are commented out because these files are useful if we want hybrid installations -->
3888
3889 <!-- os specific tidy-ups -->
3890 <!-- linux, mac -->
3891 <if><bool><istrue value="${current.os.isunix}"/></bool>
3892 <!--*****<delete><fileset dir="." includes="*.bat"/></delete>-->
3893 <if><bool><isset property="with.gli.and.gems"/></bool>
3894 <!--*****<delete><fileset dir="gli" includes="*.bat"/></delete>-->
3895 </if>
3896 <!--*****<delete><fileset dir="gs2build" includes="*.bat"/></delete>-->
3897 <!--*****<delete><fileset dir="bin/script" includes="*.bat"/></delete>-->
3898 <delete file="${basedir}/gs2build/win32cfg.h"/>
3899 <delete file="${basedir}/gs2build/win32.mak"/>
3900 <delete dir="${basedir}/winutil"/>
3901 <delete failonerror="false"><fileset dir="${lib.jni}" includes="*.dll"/></delete>
3902
3903 <!-- windows -->
3904 <else><if><bool><istrue value="${current.os.iswindows}"/></bool>
3905 <!--*****<delete><fileset dir="." includes="*.sh,*.bash,*.csh"/></delete>-->
3906 <if><bool><isset property="with.gli.and.gems"/></bool>
3907 <!--*****<delete><fileset dir="gli" includes="*.sh,*.bash,*.csh"/></delete>-->
3908 </if>
3909 <!--*****<delete><fileset dir="gs2build" includes="*.sh,*.bash,*.csh"/></delete>-->
3910 <!--*****<delete><fileset dir="bin/script" includes="*.sh,*.bash,*.csh"/></delete>-->
3911 </if></else></if>
3912
3913 </target>
3914
3915 <!-- fix up executable permissions for binary release -->
3916 <target name="fix-execute-permissions">
3917 <echo>Setting binaries to executable</echo>
3918 <chmod perm="775">
3919 <fileset dir="."><patternset refid="greenstone3.executables"/></fileset>
3920 </chmod>
3921 </target>
3922
3923 <!-- fix up executable permissions for source code release -->
3924 <target name="fix-execute-permissions-source">
3925 <chmod perm="775">
3926 <fileset dir="."><patternset refid="greenstone3.source.executables"/></fileset>
3927 </chmod>
3928 </target>
3929
3930 <!-- for macs, set up the .app shortcuts to gsi, gli, client-gli and gems -->
3931 <target name="gen-mac-shortcuts">
3932 <if><bool><istrue value="${current.os.ismac}"/></bool>
3933 <filter token="gsdl3srchome" value="${basedir}"/>
3934 <copy file="${basedir}/gs3-server.app/Contents/document.wflow.in" tofile="${basedir}/gs3-server.app/Contents/document.wflow" filtering="true" overwrite="true"/>
3935 <copy file="${basedir}/gli.app/Contents/document.wflow.in" tofile="${basedir}/gli.app/Contents/document.wflow" filtering="true" overwrite="true"/>
3936 <copy file="${basedir}/client-gli.app/Contents/document.wflow.in" tofile="${basedir}/client-gli.app/Contents/document.wflow" filtering="true" overwrite="true"/>
3937 <copy file="${basedir}/gems.app/Contents/document.wflow.in" tofile="${basedir}/gems.app/Contents/document.wflow" filtering="true" overwrite="true"/>
3938 </if>
3939 </target>
3940
3941 <!-- ============= tweaks for making compilation static ========== -->
3942 <target name="tweak-makefiles" depends="init" if="compile.static">
3943 <antcall target="rtftohtml-add-static" />
3944 </target>
3945
3946 <target name="rtftohtml-add-static" depends="init" if="collection.building.enabled">
3947 <rsr verbosity="1" file="${gs2build.home}/build-src/packages/rtftohtml/rtftohtml_src/Makefile" pattern="-o rtftohtml(.{2})EXEEXT(.{1})" replacement="-o rtftohtml$1EXEEXT$2 -static" />
3948 </target>
3949
3950 <target name="run-collection-tests">
3951 <if><bool><not><available file="${basedir}/ext/testing" type="dir"/></not></bool>
3952 <fail>The testing extension is not available. This is required to perform the tests. It can be acquired from SVN by running the command "svn co http://svn.greenstone.org/gs3-extensions/testing/trunk/src testing" in the ext directory of your Greenstone 3 installation. </fail>
3953 </if>
3954 <for param="testjar">
3955 <path>
3956 <fileset dir="${basedir}" includes="web/sites/*/collect/*/tests/tests.jar"/>
3957 </path>
3958 <sequential>
3959 <echo>Testing @{testjar}</echo>
3960 <java classname="org.junit.runner.JUnitCore" fork="true">
3961 <arg value="gstests.TestClass"/>
3962 <jvmarg value="-DSERVERURL=${default.server.protocol}://${tomcat.server}:${default.tomcat.port}${app.path}${server.default.servlet} "/>
3963 <classpath>
3964 <fileset dir="${basedir}/ext/testing/lib/java">
3965 <include name="*.jar"/>
3966 </fileset>
3967 <files includes="@{testjar}"/>
3968 </classpath>
3969 </java>
3970 </sequential>
3971 </for>
3972 </target>
3973
3974 <target name="build-collection-tests">
3975 <if><bool><not><available file="${basedir}/ext/testing" type="dir"/></not></bool>
3976 <fail>The testing extension is not available. This is required to perform the tests. It can be acquired from SVN by running the command "svn co http://svn.greenstone.org/gs3-extensions/testing/trunk/src testing" in the ext directory of your Greenstone 3 installation. </fail>
3977 </if>
3978 <for param="compiledir">
3979 <path>
3980 <dirset dir="${basedir}" includes="web/sites/*/collect/*/tests/src"/>
3981 </path>
3982 <sequential>
3983 <echo>Compiling @{compiledir}</echo>
3984 <if><bool><not><available file="@{compiledir}/../build" type="dir"/></not></bool>
3985 <mkdir dir="@{compiledir}/../build"/>
3986 </if>
3987 <javac
3988 srcdir="@{compiledir}"
3989 destdir="@{compiledir}/../build"
3990 includeantruntime="${compile.includeantruntime}"
3991 debug="${compile.debug}"
3992 deprecation="${compile.deprecation}"
3993 optimize="${compile.optimize}"
3994 encoding="${compile.encoding}">
3995 <classpath>
3996 <fileset dir="${basedir}/ext/testing/lib/java">
3997 <include name="*.jar"/>
3998 </fileset>
3999 </classpath>
4000 <include name="gstests/*.java"/>
4001 </javac>
4002 <jar destfile="@{compiledir}/../tests.jar">
4003 <fileset dir="@{compiledir}/../build">
4004 <include name="gstests/**"/>
4005 </fileset>
4006 <manifest>
4007 <attribute name="Built-By" value="${user.name}" />
4008 </manifest>
4009 </jar>
4010 </sequential>
4011 </for>
4012 </target>
4013</project>
Note: See TracBrowser for help on using the repository browser.