Context Navigation

source: trunk/gsdl/Install.sh@ 10637

Last change on this file since 10637 was 10637, checked in by chi, 19 years ago
Change version to 2.62.
Property svn:executable set to ``* Property svn:mime-type set to `application/octet-stream`
File size: 80.3 KB

Line
1	#!/bin/sh
2
3	## Install.sh -- Install Greenstone
4
5
6	# set iscdrom variable to "yes" for a cdrom installation
7	iscdrom="yes"
8
9	# This string will always be in English so is not translated
10	echo "Which version of Greenstone do you want installed: "
11	echo "[E]nglish, (F)rench, (R)ussian or (S)panish?"
12	printf "%s" "> "
13	read gsdllang
14	gsdllang=`echo $gsdllang \| tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
15
16
17	# ------------------------------------------------------------------------------
18	# FRENCH STRINGS
19	# ------------------------------------------------------------------------------
20	if [ "$gsdllang" == "f" ] \|\| [ "$gsdllang" == "french" ]; then
21
22	gsdllangcode=fr
23
24	itext0="Greeenstone n'a pu être installé"
25
26	itext1="Install.h doit être exécuté à partir du répertoire dans lequel il réside."
27
28	itext2="ERREUR: n'a pu trouver l'emplacement "
29
30	itext3cd="Ce script va installer Greenstone sur votre système. Vous pourriez
31	parcourir le document Install.pdf présent dans le repertoire des
32	documents de ce CD ROM avant de poursuivre avec l'installation."
33
34	itext3web="Ce script va installer Greenstone sur votre système. Vous pourrier
35	télécharger et consulter le Guide d'installeur de Greenstone
36	(Install.pdf) avant de poursuivre l'installation."
37
38	itext3="Notez que lorsque l'on vous demande de taper une réponse, appuyer
39	sur \"entrer\" sélectionnera le choix par défaut (indiqué entre
40	crochets [] à la fin de chaque question). Si vous hésitez sur
41	l'option à choisir, choisissez l'option par défaut.
42
43	Notez aussi que Install.sh affiche des informations concernant la
44	commande exécutée sur votre système sous la forme:
45	\"--> Install.sh: [command]\".
46
47	Dans cette installation, il est supposé que vous ayez déjà un
48	serveur Web installé sur votre système.
49
50	Afin de le consulter ultérieurement, le texte affiché lors de
51	l'installation, celui ci est enregistré dans un fichier appelé
52	INSTALL_RECORD qui sera placé dans le répertoire à partir duquel
53	vous avez choisi d'installer Greenstone.
54
55	Continuer? [y]"
56
57	itext4="
58	Dans quel répertoire voulez-vous installer Greenstone?
59	Assurez-vous que ce répertoire est sur une partition avec suffisamment
60	d'espace disque pour les options que vous avez l'intention de choisir."
61
62	itext5="
63	* Une installation binaire pour Linux nécessite environ 40Mo."
64
65	itext6="
66	* La compilation du code source de Greenstone nécessite environ 155Mo.
67	* L'installation facultative des collections Greenstone de
68	démonstration peut occuper jusqu'à 135Mo de plus (la taille de
69	chaque collection vous sera indiquée avant l'installation).
70	* La documentation en ligne nécessite 4Mo de plus.
71	* L'option permettant à Greenstone d'exporter des collections
72	\"CD exporting\" nécessite 24Mo de plus.
73	Entrez le répertoire d'installation de Greenstone. Un répertoire gsdl
74	sera créé dans ce répertoire."
75
76	itext34="
77	Entrez le répertoire existant cgi pour les fichiers exécutables
78	[/usr/local/apache/cgi-bin]"
79
80	itext59="
81	Cette installation nécessite l'utilitaire Gnu 'make' qui n'a pu être trouvé
82	sur cet ordinateur. Veuillez entrer le chemin d'accès vers Gnu make"
83
84	itextdoccols="
85	La collection Greenstone de démonstration a été installée. Souhaitez-vous
86	installer d'autres collections à partir du CD-ROM d'installation? [y]"
87
88	itextdec_dls="
89	Sous-ensemble de la collection Bibliothèque de Développement (dls-e) - 38MB [y]"
90
91	itextdec_wrdpdf="
92	Démonstration MSWord et PDF (wrdpdf-e) - 4MB [y]"
93
94	itextdec_gsarch="
95	Collection des Archives de Greenstone (gsarch-e) - 9MB [y]"
96
97	itextdec_cltbib="
98	Collection bibliographie (cltbib-e) - 9MB [y]"
99
100	itextdec_cltext="
101	Supplément bibliographie (cltext-e) - 1MB [y]"
102
103	itextdec_marc="
104	Exemple MARC (MARC-e) - 2MB [y]"
105
106	itextdec_oai="
107	Démo OAI (OAI-e) - 19MB [y]"
108
109	itextdec_image="
110	Collection d'images simple (image-e) - 1MB [y]"
111
112	itextdec_authen="
113	Démonstration de formatage et d'authentification (authen-e) - 12MB [y]"
114
115	itextdec_garish="
116	Version Garish de la collection de démonstration (garish) - 12MB [y]"
117
118	itextdec_isis="
119	Exemple CDS/ISIS (isis-e) - 2MB [y]"
120
121
122	# ------------------------------------------------------------------------------
123	# RUSSIAN STRINGS
124	# ------------------------------------------------------------------------------
125	elif [ "$gsdllang" == "r" ] \|\| [ "$gsdllang" == "russian" ]; then
126
127	gsdllangcode=ru
128
129	itext0="Greenstone ÎÅ ÂÙÌ ÕÓÔÁÎÏ×ÌÅÎ"
130
131	itext1="Install.sh ÄÏÌÖÅÎ ÂÙÔØ ÕÓÔÁÎÏ×ÌÅÎ ÉÚ ÄÉÒÅËÔÏÒÉÉ, × ËÏÔÏÒÏÊ ÏÎ ÒÁÚÍÅÝÁÅÔÓÑ"
132
133	itext2="ïûéâëá: îÅ×ÏÚÍÏÖÎÏ ÏÐÒÅÄÅÌÉÔØ ÍÅÓÔÏÐÏÌÏÖÅÎÉÅ"
134
135	itext3cd="üÔÏÔ ÓËÒÉÐÔ ÕÓÔÁÎÏ×ÉÔ Greenstone × ÷ÁÛÕ ÓÉÓÔÅÍÕ. ðÒÉ ÖÅÌÁÎÉÉ ÷Ù ÍÏÖÅÔÅ
136	ÐÒÏÓÍÏÔÒÅÔØ ÄÏËÕÍÅÎÔ Install.pdf, ËÏÔÏÒÙÊ ÒÁÓÐÏÌÏÖÅÎ × ÄÉÒÅËÔÏÒÉÉ docs
137	ÎÁ ÄÁÎÎÏÍ CD-ROM, ÄÏ ÐÒÏÄÏÌÖÅÎÉÑ ÉÎÓÔÁÌÌÑÃÉÉ."
138
139	itext3web="üÔÏÔ ÓËÒÉÐÔ ÕÓÔÁÎÏ×ÉÔ Greenstone ÎÁ ×ÁÛ ËÏÍÐØÀÔÅÒ. ðÒÉ ÖÅÌÁÎÉÉ ÍÏÖÅÔÅ
140	ÚÁÇÒÕÚÉÔØ É ÐÒÏÇÌÑÄÅÔØ òÕËÏ×ÏÄÓÔ×Ï ÐÏ ÕÓÔÁÎÏ×ËÅ Greenstone (Install.pdf)
141	ÐÅÒÅÄ ÐÒÏÄÏÌÖÅÎÉÅÍ ÕÓÔÁÎÏ×ËÉ."
142
143	itext3="
144	úÁÍÅÔØÔÅ, ÞÔÏ ËÏÇÄÁ ÐÏÓÔÕÐÁÅÔ ÐÒÉÇÌÁÛÅÎÉÅ ÎÁ ××ÏÄ, ÎÁÖÁÔÉÅ ËÌÁ×ÉÛÉ
145	\"enter\" ×ÙÂÉÒÁÅÔ ÐÏ ÕÍÏÌÞÁÎÉÀ ÚÁÄÁÎÎÏÅ × Ë×ÁÄÒÁÔÎÙÈ ÓËÏÂËÁÈ [] ×
146	ËÏÎÃÅ ËÁÖÄÏÇÏ ×ÏÐÒÏÓÁ. åÓÌÉ ×Ù ÎÅ Õ×ÅÒÅÎÙ, ËÁËÏÊ ×ÁÒÉÁÎÔ ×ÙÂÒÁÔØ,
147	ÉÓÐÏÌØÚÕÊÔÅ ÔÏÔ, ËÏÔÏÒÙÊ ÄÁÎ ÐÏ ÕÍÏÌÞÁÎÉÀ.
148
149	úÁÍÅÔØÔÅ ÔÁËÖÅ, ÞÔÏ Install.sh ×ÙÄÁÅÔ ÎÁ ÐÅÞÁÔØ ÉÎÆÏÒÍÁÃÉÀ ÌÀÂÙÈ
150	ËÏÍÁÎÄ, ËÏÔÏÒÙÅ ÐÏÓÔÕÐÁÀÔ × ÷ÁÛÕ ÓÉÓÔÅÍÕ × ÆÏÒÍÅ
151	\"--> Install.sh: [command]\".
152
153	ðÏ×ÓÀÄÕ ÐÒÅÄÐÏÌÁÇÁÅÔÓÑ, ÞÔÏ ×ÙÐÏÌÎÅÎÎÁÑ ÷ÁÍÉ ÐÒÏÃÅÄÕÒÁ ÉÎÓÔÁÌÌÑÃÉÉ,
154	ÕÓÔÁÎÏ×ÉÌÁ ÷ÅÂ-ÓÅÒ×ÅÒ × ÷ÁÛÕ ÓÉÓÔÅÍÕ.
155
156	äÌÑ ÐÏÓÌÅÄÕÀÝÉÈ ÓÓÙÌÏË ×ÙÈÏÄ ÄÁÎÎÏÇÏ ÉÎÓÔÁÌÌÑÃÉÏÎÎÏÇÏ ÓËÒÉÐÔÁ ÂÕÄÅÔ
157	ÚÁÐÉÓÁÎ × ÆÁÊÌÅ, ÎÁÚÙ×ÁÅÍÏÍ INSTALL_RECORD, × ÉÒÅËÔÏÒÉÉ, ËÏÔÏÒÕÀ ÷Ù
158	×ÙÂÒÁÌÉ ÄÌÑ ÉÎÓÔÁÌÌÑÃÉÉ Greenstone.
159
160	ðÒÏÄÏÌÖÉÔØ? [y]"
161
162	itext4="
163	÷ ËÁËÕÀ ÄÉÒÅËÔÏÒÉÀ ÄÏÌÖÅÎ ÂÙÔØ ÕÓÔÁÎÏ×ÌÅÎ Greenstone? õÄÏÓÔÏ×ÅÒØÔÅÓØ,
164	ÞÔÏ ÜÔÁ ÄÉÒÅËÔÏÒÉÑ ÎÁÈÏÄÉÔÓÑ ÎÁ ÕÞÁÓÔËÅ Ó ÄÏÓÔÁÔÏÞÎÙÍ Ó×ÏÂÏÄÎÙÍ
165	ÐÒÏÓÔÒÁÎÓÔ×ÏÍ ÎÁ ÄÉÓËÅ ÄÌÑ ÉÎÓÔÁÌÑÃÉÏÎÎÙÈ ×ÁÒÉÁÎÔÏ×, ËÏÔÏÒÙÅ ÷Ù
166	ÎÁÍÅÒÅ×ÁÅÔÅÓØ ×ÙÂÒÁÔØ."
167
168	itext5="
169	* éÎÓÔÁÌÌÑÃÉÑ ÂÉÎÁÒÎÏÇÏ Linux ÔÒÅÂÕÅÔ ÐÒÉÂÌÉÚÉÔÅÌØÎÏ 40 Mb."
170
171	itext6="
172	* ëÏÍÐÉÌÑÃÉÑ Greenstone ÉÚ ÉÓÈÏÄÎÏÊ ÐÒÏÇÒÁÍÍÙ ÔÒÅÂÕÅÔ ÐÒÉÂÌÉÚÉÔÅÌØÎÏ
173	155 Mb.
174	* ðÒÏÉÚ×ÏÌØÎÙÅ ÄÅÍÏÎÓÔÒÁÃÉÏÎÎÙÅ ËÏÌÌÅËÃÉÉ Greenstone ÍÏÇÕÔ
175	ÉÓÐÏÌØÚÏ×ÁÔØ ÄÏ 135 Mb (÷ÁÍ ÎÅÏÂÈÏÄÉÍÏ ÚÎÁÔØ ÒÁÚÍÅÒ ËÁÖÄÏÊ
176	ÉÎÄÉ×ÉÄÕÁÌØÎÏÊ ËÏÌÌÅËÃÉÉ ÐÅÒÅÄ ÔÅÍ, ËÁË ÉÎÓÔÁÌÌÉÒÏ×ÁÔØ ÅÅ).
177	* ïÎÌÁÊÎÏ×ÁÑ ÄÏËÕÍÅÎÔÁÃÉÑ ÔÒÅÂÕÅÔ ÄÁÌØÎÅÊÛÉÈ 4 Mb.
178	* æÕÎËÃÉÑ ÄÏÓÔÕÐÎÏÓÔÉ Greenstone \"CD exporting\" ÔÒÅÂÕÅÔ ÅÝÅ 24 Mb.
179	÷×ÅÄÉÔÅ ÄÉÒÅËÔÏÒÉÀ ÄÌÑ ÉÎÓÔÁÌÌÑÃÉÉ × ÎÅÅ Greenstone. äÉÒÅËÔÏÒÉÑ gsdl
180	ÂÕÄÅÔ ÓÏÚÄÁÎÁ × ÜÔÏÊ ÄÉÒÅËÔÏÒÉÉ."
181
182	itext34="
183	÷×ÅÄÉÔÅ ÓÕÝÅÓÔ×ÕÀÝÕÀ cgi-×ÙÐÏÌÎÉÍÕÀ ÄÉÒÅËÔÏÒÉÀ [/usr/local/apache/cgi-bin]"
184
185	itext59="
186	üÔÁ ÉÎÓÔÁÌÌÑÃÉÑ ÔÒÅÂÕÅÔ GNU, ËÏÔÏÒÙÊ ÎÅ ÂÙÌ ÏÂÎÁÒÕÖÅÎ × ÷ÁÛÅÊ
187	ÓÉÓÔÅÍÅ. ðÏÖÁÌÕÊÓÔÁ, ××ÅÄÉÔÅ ÐÕÔØ ÄÌÑ ×ÙÐÏÌÎÅÎÉÑ GNU."
188
189	itextdoccols="
190	äÅÍÏÎÓÔÒÁÃÉÏÎÎÁÑ ËÏÌÌÅËÃÉÑ Greenstone ÂÙÌÁ ÕÓÔÁÎÏ×ÌÅÎÁ. èÏÔÉÔÅ ÌÉ
191	÷Ù ÕÓÔÁÎÏ×ÉÔØ ÌÀÂÙÅ ÄÒÕÇÉÅ ËÏÌÌÅËÃÉÉ ÉÚ ÉÎÓÔÁÌÑÃÉÏÎÎÏÇÏ CD-ROM? [y]"
192
193	itextdec_dls="
194	óÕÂËÏÌÌÅËÃÉÑ âÉÂÌÉÏÔÅËÉ ÒÁÚ×ÉÔÉÑ (dls-e) - 38MB [y]"
195
196	itextdec_wrdpdf="
197	äÅÍÏÎÓÔÒÁÃÉÑ MSWord É PDF (wrdpdf-e) - 4MB [y]"
198
199	itextdec_gsarch="
200	ëÏÌÌÅËÃÉÑ ÁÒÈÉ×Ï× Greenstone (gsarch-e) - 9MB [y]"
201
202	itextdec_cltbib="
203	âÉÂÌÉÏÇÒÁÆÉÞÅÓËÁÑ ËÏÌÌÅËÃÉÑ (cltbib-e) - 9MB [y]"
204
205	itextdec_cltext="
206	ðÒÉÌÏÖÅÎÉÅ ÂÉÂÌÉÏÇÒÁÆÉÉ (cltext-e) - 1MB [y]"
207
208	itextdec_marc="
209	ðÒÉÍÅÒ MARC (MARC-e) - 2MB [y]"
210
211	itextdec_oai="
212	äÅÍÏÎÓÔÒÁÃÉ-ÏÎÎÁÑ ËÏÌÌÅËÃÉÑ OAI (OAI-e) - 19MB [y]"
213
214	itextdec_image="
215	ðÒÏÓÔÁÑ ËÏÌÌÅËÃÉÑ ÉÚÏÂÒÁÖÅÎÉÊ (image-e) - 1MB [y]"
216
217	itextdec_authen="
218	äÅÍÏÎÓÔÒÁÃÉÑ ÆÏÒÍÁÔÉÒÏ×Á-ÎÉÑ É ÁÕÔÅÎÔÉÆÉËÁÃÉÉ (authen-e) - 12MB [y]"
219
220	itextdec_garish="
221	òÅÚËÁÑ ×ÅÒÓÉÑ ÄÅÍÏÎÓÔÒÁÃÉÏÎ-ÎÏÊ ËÏÌÌÅËÃÉÉ (garish) - 12MB [y]"
222
223	itextdec_isis="
224	ðÒÉÍÅÒ CDS/ISIS (isis-e) - 2MB [y]"
225
226
227	# ------------------------------------------------------------------------------
228	# SPANISH STRINGS
229	# ------------------------------------------------------------------------------
230	elif [ "$gsdllang" == "s" ] \|\| [ "$gsdllang" == "spanish" ]; then
231
232	gsdllangcode=es
233
234	itext0="Greenstone no ha sido instalado."
235
236	itext1="Install.sh deberá correrse desde el directorio en el que reside."
237
238	itext2="ERROR: No se pudo localizar "
239
240	itext3cd="Este guión instalará Greenstone en su sistema. Le recomendamos que
241	lea el documento install.pdf que reside en el directorio de documentos
242	de este CD-ROM antes de continuar con la instalación."
243
244	itext3web="Este programa va a instalar Greenstone en su sistema. Se recomienda
245	obtener y revisar la Guía de Instalación de Greenstone (Install.pdf)
246	antes de continuar."
247
248	itext3="
249	Recuerde que cuando se le pida que ingrese la información, al oprimir
250	\"ingresar\" usted seleccionará los ajustes por omisión (que aparecen
251	entre corchetes [] al final de cada pregunta). Si no está seguro de
252	cuál opción seleccionar utilice los ajustes por omisión.
253
254	Recuerde asimismo que Install.sh imprime la información de cualquier
255	comando que se ejecute en su sistema en la siguiente forma:
256	\"--> Install.sh: [comando]\".
257
258	Durante todo el proceso de instalación se asume que usted ya tiene un
259	servidor Web instalado en su sistema.
260
261	Como referencia para un uso posterior los resultados de este guión de
262	instalación se registrarán en un archivo llamado INSTALL_RECORD en el
263	directorio en el que usted decidió instalar Greenstone.
264
265	¿Desea continuar? [y]"
266
267	itext4="
268	¿En qué directorio se instalará Greenstone? Asegúrese de que este
269	directorio esté en una partición con suficiente espacio libre en el
270	disco para las opciones que usted pretende instalar."
271
272	itext5="
273	* La instalación de un binario Linux requiere aproximadamente 40 MB."
274
275	itext6="
276	* La compilación de Greenstone desde un código fuente requiere
277	aproximadamente 155 MB.
278	* También pueden usarse colecciones muestra opcionales hasta un total
279	de 135 MB (se le indicará el tamaño de cada colección individual
280	antes de instalarla).
281	* La documentación en línea requiere de otros 4 MB.
282	* La función \"exportar a un CD\" de Greenstone requerirá de otros 24 MB.
283	Ingrese el directorio para instalar Greenstone. Se creará un directorio
284	gsdl en este directorio."
285
286	itext34="
287	Ingrese un directorio ejecutable cgi existente [/usr/local/apache/cgi-bin]"
288
289	itext59="Esta instalación requiere una utilería make GNU, el cual podría no
290	encontrarse en su sistema. Por favor ingrese la ruta hacia la
291	utilería make GNU."
292
293	itextdoccols="
294	La colección de muestra Greenstone ha sido instalada. ¿Le gustaría instalar
295	alguna otra colección del CD-ROM de instalación? [y]"
296
297	itextdec_dls="
298	Subconjunto de la Biblioteca para el Desarrollo (dls-e) - 38MB [y]"
299
300	itextdec_wrdpdf="
301	Demostración en MSWord y PDF (wrdpdf-e) - 4MB [y]"
302
303	itextdec_gsarch="
304	Colección de Archivos Greenstone (gsarch-e) - 9MB [y]"
305
306	itextdec_cltbib="
307	Colección bibliográfica (cltbib-e) - 9MB [y]"
308
309	itextdec_cltext="
310	Suplemento bibliográfico (cltext-e) - 1MB [y]"
311
312	itextdec_marc="
313	Colección de muestra MARC (MARC-e) - 2MB [y]"
314
315	itextdec_oai="
316	Colección de muestra OAI (OAI-e) - 19MB [y]"
317
318	itextdec_image="
319	Colección de imágenes sencillas (image-e) - 1MB [y]"
320
321	itextdec_authen="
322	Demostración de formateo y autenticación (authen-e) - 12MB [y]"
323
324	itextdec_garish="
325	Versión Garish de la colección de muestra (garish) - 12MB [y]"
326
327	itextdec_isis="
328	Colección de muestra CDS/ISIS (isis-e) - 2MB [y]"
329
330
331	# ------------------------------------------------------------------------------
332	# ENGLISH STRINGS
333	# ------------------------------------------------------------------------------
334	else
335
336	gsdllangcode=en
337
338	itext0="Greenstone was not installed"
339
340	itext1="Install.sh must be run from the directory in which it resides"
341
342	itext2="ERROR: Could not locate "
343
344	itext3cd="This script will install Greenstone on your system. You may want
345	to skim through the Install.pdf document that resides in the docs
346	directory on this cd-rom before continuing with the installation."
347
348	itext3web="This script will install Greenstone on your system. You may
349	want to download and skim through the Greenstone Installer's Guide
350	(Install.pdf) before continuing with the installation"
351
352	itext3="
353	Note that when prompted for input, hitting \"enter\" will select
354	the default (given in square brackets [] at the end of each question).
355	If you're unsure which option to select, use the default.
356
357	Note also that Install.sh prints out information on any commands
358	it runs on your system in the form \"--> Install.sh: [command]\".
359
360	It is assumed throughout this installation procedure that you
361	have a webserver installed on your system.
362
363	For later reference the output of this install script will be
364	recorded in a file called INSTALL_RECORD in the directory into
365	which you choose to install Greenstone.
366
367	Continue? [y]"
368
369	itext4="
370	Which directory should Greenstone be installed to?
371	Make sure that this directory is on a partition with sufficient
372	free disk space for the installation options you intend selecting."
373
374	itext5="
375	* A linux binary installation requires approximately
376	40Mb."
377
378	itext6="
379	* Compiling Greenstone from source code requires
380	approximately 155Mb.
381	* Optional Greenstone demonstration collections may use up
382	to a further 135Mb (you'll be told the size of each individual
383	collection before you install it).
384	* Online documentation requires a further 4Mb.
385	* Enabling Greenstone's \"CD exporting\" function requires a
386	further 24Mb.
387	Enter directory to install Greenstone into. A gsdl directory
388	will be created in this directory."
389
390	itext34="
391	Enter existing cgi executable directory [/usr/local/apache/cgi-bin]"
392
393	itext59="
394	This installation requires GNU make which could not be detected
395	on your system. Please enter the path to gnu make"
396
397	itextdoccols="
398	The Greenstone demonstration collection has been installed. Would you
399	like to install any other collections from the installation cd-rom? [y]"
400
401	itextdec_dls="
402	Development Library Subset collection (dls-e) - 38MB? [y]"
403
404	itextdec_wrdpdf="
405	MSWord and PDF demonstration (wrdpdf-e) - 4MB? [y]"
406
407	itextdec_gsarch="
408	Greenstone Archives collection (gsarch-e) - 9MB? [y]"
409
410	itextdec_cltbib="
411	Bibliography collection (cltbib-e) - 9MB? [y]"
412
413	itextdec_cltext="
414	Bibliography supplement (cltext-e) - 1MB? [y]"
415
416	itextdec_marc="
417	MARC example (MARC-e) - 2MB? [y]"
418
419	itextdec_oai="
420	OAI demo collection (oai-e) - 19MB? [y]"
421
422	itextdec_image="
423	Simple image collection (image-e) - 1MB? [y]"
424
425	itextdec_authen="
426	Formatting and authentication demo (authen-e) - 12MB? [y]"
427
428	itextdec_garish="
429	Garish version of demo collection (garish) - 12MB? [y]"
430
431	itextdec_isis="
432	CDS/ISIS example collection (isis-e) - 2MB? [y]"
433
434	fi
435
436
437	# ==============================================================================
438	# INSTALLATION CODE
439	# ==============================================================================
440
441	cmd_cp="cp"
442	cmd_cpr="cp -r"
443	cmd_chmod="chmod"
444	cmd_mkdir="mkdir -p"
445	cmd_ln="ln -s"
446	cmd_mv="mv"
447	cmd_rm="rm -i"
448	cmd_rmr="rm -r"
449
450	thisdir=`pwd`
451	cd ..
452	cd_dir=`pwd`
453	cd "$thisdir"
454
455
456	# script must be run from within cdrom/unix directory
457	if [ ! -f "${thisdir}/Install.sh" ]; then
458	echo "$itext1"
459	echo "$itext0"
460	exit 1
461	fi
462
463	# check that various important directories are on the cd
464	if [ ! -d "${cd_dir}/gsdl" ]; then
465	echo
466	echo "${itext2}${cd_dir}/gsdl"
467	echo "$itext0"
468	exit 1
469	fi
470	if [ ! -d "${cd_dir}/Unix/bin/linux" ]; then
471	echo
472	echo "${itext2}${cd_dir}/Unix/bin/linux"
473	echo "$itext0"
474	exit 1
475	fi
476
477	# install to /usr/local by default if user is "root", otherwise
478	# default to users home directory
479	gsdlos=`uname -s \| tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
480	if [ "$gsdlos" = "linux" ]; then
481	logname=`whoami`
482	else
483	logname=""
484	fi
485	if [ "$logname" = "" ]; then
486	logname=`logname`
487	fi
488	gsdlhome="/home/${logname}"
489	if [ "$logname" = "root" ]; then
490	gsdlhome="/usr/local"
491	fi
492
493	installpdf=$itext3cd
494	if [ $iscdrom = "no" ]; then
495	installpdf=$itext3web
496	fi
497
498	echo "$installpdf"
499	echo "$itext3"
500	printf "%s" "> "
501	read ans
502	log="${log}${itext3}
503	> $ans
504	"
505	if [ "$ans" != "" ] && [ "$ans" != "y" ]; then
506	echo "$itext0"
507	exit 0
508	fi
509
510	# check we've got gnu make (we assume gnu make will always be used on linux)
511	make="make"
512	if [ "$gsdlos" != "linux" ]; then
513	# if gmake exists, use it
514	whichgmake=`which gmake 2> /dev/null`
515	if [ -x "$whichgmake" ]; then
516	make="gmake"
517	else
518	# try plain old "make"
519	make_ver=`make -v 2> /dev/null \| sed -n 's/^GNU.*/GNU/p'`
520	if [ "$make_ver" != "GNU" ]; then
521	echo "$itext59"
522	log="${log}$itext59"
523	printf "%s" "> "
524	read ans
525	make="$ans"
526	fi
527	fi
528	fi
529
530	# get gsdlhome
531	msg="$itext4"
532	if [ "$gsdlos" = "linux" ]; then
533	msg="${msg}$itext5"
534	fi
535	msg="${msg}$itext6 [${gsdlhome}]"
536	echo "$msg"
537	printf "%s" "> "
538	read ans
539	log="${log}${msg}
540	> $ans
541	"
542	if [ "$ans" != "" ]; then
543	gsdlhome="$ans"
544	fi
545
546	# ------------------------------------------------------------------------------
547	# MORE FRENCH STRINGS
548	# ------------------------------------------------------------------------------
549	if [ "$gsdllangcode" == "fr" ]; then
550
551	itext7="
552	Avertissement: Le répertoire ${gsdlhome} n'existe pas.
553	Voulez-vous le créer? [y]"
554
555	itext8="ERREUR: la création du répertoire $gsdlhome a échoué"
556
557	# ------------------------------------------------------------------------------
558	# MORE RUSSIAN STRINGS
559	# ------------------------------------------------------------------------------
560	elif [ "$gsdllangcode" == "ru" ]; then
561
562	itext7="
563	ðÒÅÄÕÐÒÅÖÄÅÎÉÅ: äÉÒÅËÔÏÒÉÑ ${gsdlhome} ÎÅ ÓÕÝÅÓÔ×ÕÅÔ.
564	óÏÚÄÁÔØ ÅÅ? [y]"
565
566	itext8="ïûéâëá: îÅ ÕÄÁÌÏÓØ ÓÏÚÄÁÔØ ÄÉÒÅËÔÏÒÉÀ $gsdlhome."
567
568	# ------------------------------------------------------------------------------
569	# MORE SPANISH STRINGS
570	# ------------------------------------------------------------------------------
571	elif [ "$gsdllangcode" == "es" ]; then
572
573	itext7="
574	Advertencia: El directorio ${gsdlhome} no existe.
575	¿Desea crearlo? [y]"
576
577	itext8="ERROR: no se pudo crear el directorio $gsdlhome."
578
579	# ------------------------------------------------------------------------------
580	# MORE ENGLISH STRINGS
581	# ------------------------------------------------------------------------------
582	else
583
584	itext7="
585	Warning: The ${gsdlhome} directory does not exist.
586	Create it? [y]"
587
588	itext8="ERROR: failed to create $gsdlhome directory"
589
590	fi
591
592	if [ ! -d "$gsdlhome" ]; then
593	echo "$itext7"
594	printf "%s" "> "
595	read ans
596	log="${log}${itext7}
597	> $ans
598	"
599	if [ "$ans" = "" ]; then
600	ans="y"
601	fi
602	if [ "$ans" = "y" ]; then
603	msg="--> Install.sh: [$cmd_mkdir \"$gsdlhome\"]"
604	echo "$msg"
605	log="${log}${msg}
606	"
607	$cmd_mkdir "$gsdlhome"
608	if [ ! -d "$gsdlhome" ]; then
609	echo "$itext8"
610	echo "$itext0"
611	exit 1
612	fi
613	else
614	echo "$itext0"
615	exit 0
616	fi
617	fi
618
619	# from now on $gsdlhome includes the "/gsdl"
620	gsdlhome="${gsdlhome}/gsdl"
621
622	# ------------------------------------------------------------------------------
623	# MORE FRENCH STRINGS
624	# ------------------------------------------------------------------------------
625	if [ "$gsdllangcode" == "fr" ]; then
626
627	itext9="
628	Si cette installation échoue ou est annulée, n'oubliez pas d'exécuter
629	le script uninstall (${gsdlhome}/Uninstall.sh) pour nettoyer
630	l'installation partielle.
631	Continuer? [y]"
632
633	itext10="
634	Installation de la hiérarchie des répertoires à partir de ${gsdlhome}"
635
636	itext11="
637	Souhaitez-vous installer la documentation Greenstone sur votre disque
638	dur? La documentation occupe environ 4Mo d'espace disque. Si vous
639	n'installez pas la documentation, vous pourrez toujours la consulter à
640	partir du répertoire 'docs' du CD-ROM [y]"
641
642	itext12="
643	Souhaitez-vous installer la fonctionnalité Greenstone pour exporter?
644	Cette fonctionnalité vous permet d'exporter une collection Greenstone
645	dans un format adapté pour graver un CD-ROM auto-installable sous
646	Windows. Ce module occupe environ 23Mo d'espace disque [n]"
647
648	itext18="Initialisation des permissions ..."
649
650	itext19="
651	Afin de permettre la construction de collection par les utilisateurs
652	finaux, le programme cgi Greenstone doit pouvoir écrire dans les
653	répertoires ${gsdlhome}/collect et ${gsdlhome}/tmp répertoires.
654	Sur la plupart des systèmes, cela veut dire que ces répertoires doivent
655	permettre l'écriture. Permettre l'écriture dans ces répertoires? [y]"
656
657	itext20="
658	Vous pouvez soit installer les fichiers [b]inaires exécutables sous
659	Linux (i386 seulement), soit installer et [c]ompiler le code source
660	de Greenstone."
661
662	itext21="Entrez \"[b]\" ou \"c\""
663
664	itext22="Installation des fichiers binaires exécutables sous Linux"
665
666	itext23="Installation du code source"
667
668	itext24="configuration ..."
669
670	itext25="compilation ..."
671
672	itext26="installation ..."
673
674	itext27="ERREUR: La compilation a échoué"
675
676	itext28="
677
678	Greenstone a besoin d'un répertoire cgi (pour les exécutables) valide
679	(normalement appelé cgi-bin sur les systèmes Unix) pour exécuter.
680	Ce peut être soit:
681	1. Le répertoire cgi-bin Greenstone par défaut (${gsdlhome}/cgi-bin).
682	Dans ce cas vous devrez configurer votre serveur Web pour considérer
683	ce répertoire comme étant son répertoire cgi pour les fichiers
684	exécutables. Pour Apache, vous pouvez utiliser la directive
685	'ScriptAlias' (les détails concernant la configuration de votre
686	serveur Web seront affichés à la fin de cette procédure
687	d'installation)."
688
689	itext29=" Veuillez noter que vous aurez certainement besoin de l'aide de votre
690	administrateur système pour reconfigurer votre serveur Web."
691
692	itext30=" 2. Un répertoire cgi-bin existant. Normallement un répertoire cgi-bin
693	est créé au moment de l'installation de votre serveur web.
694	Généralement c'est soit /home/httpd/cgi-bin, soit
695	/usr/local/apache/cgi-bin, soit /var/lib/apache/cgi-bin."
696
697	itext31=" De nombreux systèmes permettent aux utilisateurs individuels d'avoir
698	leur propre répertoire cgi-bin in /home/username/public_html/cgi-bin."
699
700	itext32="Entrez \"[1]\" or \"2\""
701
702	itext33="
703	N'oubliez pas de configurer votre serveur Web pour considérer
704	${gsdlhome}/cgi-bin comme le répertoire cgi exécutable. Ne vous en
705	faites pas, vous serez à nouveau prévenu à la fin de cette procédure
706	d'installation."
707
708	itext37="Exécutez le script uninstall (${gsdlhome}/Uninstall.sh) pour nettoyer
709	une installation partielle."
710
711	itext42="
712
713	Pour pouvoir exécuter Greenstone, le répertoire $gsdlhome et tout son
714	contenu doit être accessible à partir du Web.
715	Pour que cela soit possible, vous pouvez soit:
716	1. Configurer le serveur Web pour que le répertoire $gsdlhome soit
717	lui-même accessible à partir du Web."
718
719	itext43=" 2. Indiquer un répertoire Web déjà accessible à partir du Web dans
720	lequel un lien symbolique (ln -s) vers $gsdlhome sera créé.
721	Lorsqu'un serveur Web est installé, un répertoire accessible à partir
722	du web est toujours créé (le serveur Web Apache utilise la directive
723	DocumentRoot pour définir ce répertoire). En général, ce répertoire
724	est appelé /home/httpd/html, ou bien /usr/local/apache/htdocs, ou
725	encore /var/lib/apache/htdocs."
726
727	itext44=" De nombreux systèmes permettent aux utilisateurs individuels
728	d'avoir leur propre répertoire accessible à partir du Web. Ces
729	répertoires sont créés à partir du répertoire
730	/home/username/public_html."
731
732	itext45=" Veuillez noter que le serveur Web devra être configuré pour
733	accepter les liens symboliques à partir de ce répertoire. Pour
734	le serveur Apache cela signifie que ce répertoire doit être
735	configuré avec les options SymLinksIfOwnerMatch et FollowSymLinks
736	(La plupart des installations Apache sont configurées de cette façon
737	par défaut)"
738
739	itext46="
740	N'oubliez pas de configurer le serveur Web pour que le répertoire $gsdlhome
741	soit accessible à partir du Web. On vous le rappellera encore une fois à la
742	fin la fin de la procédure d'installation."
743
744	# ------------------------------------------------------------------------------
745	# MORE RUSSIAN STRINGS
746	# ------------------------------------------------------------------------------
747	elif [ "$gsdllangcode" == "ru" ]; then
748
749	itext9="
750	åÓÌÉ ÜÔÁ ÉÎÓÔÁÌÌÑÃÉÑ ÂÙÌÁ ÎÅÕÄÁÞÎÏÊ ÉÌÉ ÏÔÍÅÎÅÎÁ, ××ÅÄÉÔÅ
751	ÄÅÉÎÓÔÁÌÌÑÃÉÏÎÎÙÊ ÓËÒÉÐÔ (${gsdlhome}/Uninstall.sh), ÞÔÏÂÙ ÏÞÉÓÔÉÔØ
752	ÞÁÓÔÉÞÎÕÀ ÕÓÔÁÎÏ×ËÕ.
753	ðÒÏÄÏÌÖÉÔØ? [y]"
754
755	itext10="
756	éÎÓÔÁÌÌÑÃÉÑ ÓÔÒÕËÔÕÒÙ ÄÉÒÅËÔÏÒÉÉ Greenstone × ${gsdlhome}"
757
758	itext11="
759	èÏÔÅÌÉ ÂÙ ÷Ù ÕÓÔÁÎÏ×ÉÔØ ÄÏËÕÍÅÎÔÁÃÉÀ Greenstone ÎÁ ÷ÁÛ ÖÅÓÔËÉÊ ÄÉÓË?
760	äÏËÕÍÅÎÔÁÃÉÑ ÔÒÅÂÕÅÔ ÐÒÉÂÌÉÚÉÔÅÌØÎÏ 4 Mb ÐÒÏÓÔÒÁÎÓÔ×Á. åÓÌÉ ÷Ù ÎÅ
761	ÈÏÔÉÔÅ ÕÓÔÁÎÁ×ÌÉ×ÁÔØ ÅÅ, Õ ÷ÁÓ ÏÓÔÁÅÔÓÑ ×ÏÚÍÏÖÎÏÓÔØ ÐÏÌÕÞÉÔØ ÄÏÓÔÕÐ
762	Ë ÎÅÊ ÉÚ ÄÉÒÅËÔÏÒÉÉ ÄÏËÕÍÅÎÔÏ× CD-ROM) [y]"
763
764	itext12="
765	èÏÔÅÌÉ ÂÙ ÷Ù ÕÓÔÁÎÏ×ÉÔØ ÐÏÄÄÅÒÖËÕ ÆÕÎËÃÉÊ Greenstone \"ÜËÓÐÏÒÔ
766	ËÏÍÐÁËÔ-ÄÉÓËÁ\"? üÔÁ ÆÕÎËÃÉÑ ÐÏÚ×ÏÌÑÅÔ ÷ÁÍ ÜËÓÐÏÒÔÉÒÏ×ÁÔØ ËÏÌÌÅËÃÉÀ
767	Greenstone × ÆÏÒÍÅ, ÐÏÄÈÏÄÑÝÅÊ ÄÌÑ Á×ÔÏÕÓÔÁÎÏ×ËÉ Windows CD-ROM. üÔÏÔ
768	ÐÁËÅÔ ÔÒÅÂÕÅÔ ÐÒÉÂÌÉÚÉÔÅÌØÎÏ 23 íâ ÄÉÓËÏ×ÏÇÏ ÐÒÏÓÔÒÁÎÓÔ×Á [n]"
769
770	itext18="õÓÔÁÎÏ×ËÁ ÒÁÚÒÅÛÅÎÉÊ..."
771
772	itext19="
773	äÌÑ ÐÏÓÔÒÏÅÎÉÑ ËÏÌÌÅËÃÉÉ, ÄÏÓÔÕÐÎÏÊ ÄÌÑ ËÏÎÅÞÎÏÇÏ ÐÏÌØÚÏ×ÁÔÅÌÑ, cgi
774	ÐÒÏÇÒÁÍÍÁ Greenstone ÄÏÌÖÎÙ ÉÍÅÔØ ×ÏÚÍÏÖÎÏÓÔØ ×ÐÉÓÁÔØÓÑ × ÄÉÒÅËÔÏÒÉÉ
775	${gsdlhome}/collect É ${gsdlhome}/tmp. äÌÑ ÂÏÌØÛÉÎÓÔ×Á ÓÉÓÔÅÍ ÜÔÏ
776	ÏÚÎÁÞÁÅÔ, ÞÔÏ ÏÎÉ ÄÏÌÖÎÙ ÂÙÔØ ÇÌÏÂÁÌØÎÏ ÐÅÒÅÚÁÐÉÓÙ×ÁÅÍÙ. óÄÅÌÁÔØ ÜÔÉ
777	ÄÉÒÅËÔÏÒÉÉ ÇÌÏÂÁÌØÎÏ ÐÅÒÅÚÁÐÉÓÙ×ÁÅÍÙÍÉ? [y]"
778
779	itext20="
780	÷Ù ÍÏÖÅÔÅ ÉÌÉ ÕÓÔÁÎÏ×ÉÔØ ÐÒÅÄËÏÍÐÉÌÉÒÕÅÍÙÅ, ÓÔÁÔÉÞÅÓËÉ Ó×ÑÚÁÎÎÙÅ
781	[b] Ä×ÏÉÞÎÙÅ ËÏÄÙ linux (ÔÏÌØËÏ i386) ÉÌÉ ÕÓÔÁÎÏ×ÉÔØ É
782	[c] ËÏÍÐÉÌÉÒÏ×ÁÔØ ÉÓÈÏÄÎÕÀ ÐÒÏÇÒÁÍÍÕ Greenstone"
783
784	itext21="÷×ÅÄÉÔÅ \"[b]\" ÉÌÉ \"c\""
785
786	itext22="éÎÓÔÁÌÌÑÃÉÑ Ä×ÏÉÞÎÙÈ ËÏÄÏ× linux"
787
788	itext23="éÎÓÔÁÌÌÑÃÉÑ ÉÓÈÏÄÎÏÊ ÐÒÏÇÒÁÍÍÙ"
789
790	itext24="ëÏÎÆÉÇÕÒÉÒÏ×ÁÎÉÅ..."
791
792	itext25="ëÏÍÐÉÌÉÒÏ×ÁÎÉÅ..."
793
794	itext26="éÎÓÔÁÌÑÃÉÑ..."
795
796	itext27="ïûéâëá: ëÏÍÐÉÌÑÃÉÑ ÎÅ ÕÄÁÌÁÓØ"
797
798	itext28="
799
800	Greenstone ÎÕÖÎÁ ÐÒÉÇÏÄÎÁÑ ÉÓÐÏÌÎÉÔÅÌØÎÁÑ ÄÉÒÅËÔÏÒÉÑ (× unix ÓÉÓÔÅÍÁÈ
801	ÏÂÙÞÎÏ ÎÁÚÙ×ÁÅÍÁÑ cgi-bin), ÉÚ ËÏÔÏÒÏÊ ÏÎ ÚÁÐÕÓËÁÅÔÓÑ.
802	üÔÏ ÍÏÖÅÔ ÂÙÔØ ÌÉÂÏ:
803	1. õÓÔÁÎÏ×ËÁ ÐÏ ÕÍÏÌÞÁÎÉÀ ÄÉÒÅËÔÏÒÉÉ Greenstone cgi-bin
804	(${gsdlhome}/cgi-bin). åÓÌÉ ×Ù ÉÓÐÏÌØÚÕÅÔÅ ÐÏ ÕÍÏÌÞÁÎÉÀ Greenstone,
805	÷ÁÍ ÎÅÏÂÈÏÄÉÍÏ ËÏÎÆÉÇÕÒÉÒÏ×ÁÔØ ÷ÁÛ ÷ÅÂ-ÓÅÒ×ÅÒ ÔÁË, ÞÔÏÂÙ ÓÄÅÌÁÔØ
806	ÜÔÕ ÄÉÒÅËÔÏÒÉÀ ËÁË cgi ÉÓÐÏÌÎÉÍÕÀ. äÌÑ ÷ÅÂ-ÓÅÒ×ÅÒÁ Apache ÷Ù
807	ÉÓÐÏÌØÚÕÅÔÅ ÄÉÒÅËÔÉ×Õ ScriptAlias, ÞÔÏÂÙ ×ÙÐÏÌÎÉÔØ ÜÔÏ (ÐÏÄÒÏÂÎÏÓÔÉ
808	Ï ÔÏÍ, ËÁË ËÏÎÆÉÇÕÒÉÒÏ×ÁÔØ ÷ÁÛ ÷ÅÂ-ÓÅÒ×ÅÒ, ÂÕÄÕÔ ÄÁÎÙ × ËÏÎÃÅ ÜÔÏÊ
809	ÐÒÏÃÅÄÕÒÙ ÉÎÓÔÁÌÌÑÃÉÉ)."
810
811	itext29=" ïÂÒÁÔÉÔÅ ×ÎÉÍÁÎÉÅ, ÞÔÏ ÷Ù ÂÕÄÅÔÅ ×ÅÒÏÑÔÎÏ ÎÕÖÄÁÔØÓÑ × ÐÏÍÏÝÉ
812	÷ÁÛÅÇÏ ÓÉÓÔÅÍÎÏÇÏ ÁÄÍÉÎÉÓÔÒÁÔÏÒÁ, ÞÔÏÂÙ ÒÅËÏÎÆÉÇÕÒÉÒÏ×ÁÔØ ÷ÁÛ
813	÷ÅÂ-ÓÅÒ×ÅÒ"
814
815	itext30=" 2. óÕÝÅÓÔ×ÕÀÝÁÑ ÄÉÒÅËÔÏÒÉÑ cgi-bin. ïÂÙÞÎÏ ÜÔÁ ÄÉÒÅËÔÏÒÉÑ
816	ÓÏÚÄÁÅÔÓÑ ÐÒÉ ÉÎÓÔÁÌÌÑÃÉÉ ×ÁÛÅÇÏ ÷ÅÂ-ÓÅÒ×ÅÒÁ. ëÁË ÐÒÁ×ÉÌÏ, ÜÔÏ ÍÏÖÅÔ
817	ÂÙÔØ /home/httpd/cgi-bin, ÉÌÉ /usr/local/apache/cgi-bin, ÉÌÉ
818	/var/lib/apache/cgi-bin."
819
820	itext31=" íÎÏÇÉÅ ÓÉÓÔÅÍÙ ÔÁËÖÅ ÐÏÚ×ÏÌÑÀÔ ÉÎÄÉ×ÉÄÕÁÌØÎÙÍ ÐÏÌØÚÏ×ÁÔÅÌÑÍ
821	ÉÍÅÔØ ÉÈ ÓÏÂÓÔ×ÅÎÎÙÊ cgi-bin × /home/username/public_html/cgi-bin."
822
823	itext32="÷×ÅÄÉÔÅ \"[1]\" ÉÌÉ \"2\""
824
825	itext33="
826	îÅ ÚÁÂÕÄØÔÅ ÓËÏÎÆÉÇÕÒÉÒÏ×ÁÔØ ÷ÁÛ ÷ÅÂ-ÓÅÒ×ÅÒ ÔÁË, ÞÔÏÂÙ ÏÂÒÁÔÉÔØ
827	${gsdlhome}/cgi-bin × cgi-×ÙÐÏÌÎÉÍÕÀ ÄÉÒÅËÔÏÒÉÀ. îÅ ×ÏÌÎÕÊÔÅÓØ, ËÏÇÄÁ
828	÷ÁÍ ÂÕÄÅÔ ÎÁÐÏÍÎÅÎÏ ÏÂ ÜÔÏÍ ÓÎÏ×Á × ËÏÎÃÅ ÐÒÏÃÅÄÕÒÙ ÉÎÓÔÁÌÌÑÃÉÉ."
829
830	itext37="éÓÐÏÌØÚÕÊÔÅ ÄÅÉÎÓÔÁÌÌÑÃÉÏÎÎÙÊ ÓËÒÉÐÔ (${gsdlhome}/Uninstall.sh)
831	ÄÌÑ ÔÏÇÏ, ÞÔÏÂÙ ÕÄÁÌÉÔØ ÞÁÓÔÉÞÎÕÀ ÕÓÔÁÎÏ×ËÕ."
832
833	itext42="
834
835	þÔÏÂÙ Greenstone ÍÏÇ ÂÙÔØ ÚÁÐÕÝÅÎ, ÄÉÒÅËÔÏÒÉÑ $gsdlhome É ×ÓÅ ÅÅ
836	ÓÏÄÅÒÖÉÍÏÅ ÄÏÌÖÎÙ ÂÙÔØ ÄÏÓÔÕÐÎÙ ÉÚ ÓÅÔÉ.
837	þÔÏÂÙ ÓÄÅÌÁÔØ ÜÔÏ ÏÓÕÝÅÓÔ×ÉÍÙÍ, ÷Ù ÍÏÖÅÔÅ ÉÌÉ:
838	1. óËÏÎÆÉÇÕÒÉÒÏ×ÁÔØ ÷ÁÛ ÷ÅÂ-ÓÅÒ×ÅÒ ÔÁË, ÞÔÏÂÙ $gsdlhome Ñ×ÌÑÌÓÑ
839	Á×ÔÏÍÁÔÉÞÅÓËÉ ÄÏÓÔÕÐÎÙÍ ÉÚ ÓÅÔÉ."
840
841	itext43=" 2.ïÂÅÓÐÅÞÉÔØ ÓÕÝÅÓÔ×ÕÀÝÕÀ ÄÏÓÔÕÐÎÕÀ ÄÉÒÅËÔÏÒÉÀ, ÉÚ
842	ËÏÔÏÒÏÊ ÓÉÍ×ÏÌØÎÁÑ ÓÓÙÌËÁ (ln -s) ÂÕÄÅÔ ÓÄÅÌÁÎÁ Ë $gsdlhome.
843	ëÏÇÄÁ ×ÁÛ ÓÅÒ×ÅÒ ÂÙÌ ÕÓÔÁÎÏ×ÌÅÎ, ÄÉÒÅËÔÏÒÉÑ, ÄÏÓÔÕÐÎÁÑ ÉÚ ÓÅÔÉ,
844	ÂÕÄÅÔ ÓÏÚÄÁÎÁ (÷ÅÂ-ÓÅÒ×ÅÒ Apache ÉÓÐÏÌØÚÕÅÔ ÄÉÒÅËÔÉ×Õ
845	DocumentRoot ÄÌÑ ÏÐÒÅÄÅÌÅÎÉÑ ÜÔÏÊ ÄÉÒÅËÔÏÒÉÉ. ïÂÙÞÎÏ ÜÔÏÊ
846	ÄÉÒÅËÔÏÒÉÅÊ ÍÏÇÌÉ ÂÙ ÂÙÔØ /home/httpd/html, ÉÌÉ
847	/usr/local/apache/htdocs, ÉÌÉ /var/lib/apache/htdocs."
848
849	itext44=" íÎÏÇÉÅ ÓÉÓÔÅÍ ÔÁËÖÅ ÐÏÚ×ÏÌÑÀÔ ÉÎÄÉ×ÉÄÕÁÌØÎÙÍ
850	ÐÏÌØÚÏ×ÁÔÅÌÑÍ ÉÍÅÔØ ÉÈ ÓÏÂÓÔ×ÅÎÎÕÀ ÄÏÓÔÕÐÎÕÀ ÉÚ ÓÅÔÉ ÄÉÒÅËÔÏÒÉÀ
851	× /home/username/public_html."
852
853	itext45=" ïÂÒÁÔÉÔÅ ×ÎÉÍÁÎÉÅ ÎÁ ÔÏ, ÞÔÏ ×ÁÛ ÷ÅÂ-ÓÅÒ×ÅÒ ÂÕÄÅÔ
854	ÄÏÌÖÅÎ ÓËÏÎÆÉÇÕÒÉÒÏ×ÁÎ ÔÁË, ÞÔÏÂÙ ÐÏÚ×ÏÌÉÔØ ÓÉÍ×ÏÌØÎÙÅ ÓÓÙÌËÉ
855	ÉÚÎÕÔÒÉ ÜÔÏÊ ÄÉÒÅËÔÏÒÉÉ. äÌÑ ÓÅÒ×ÅÒÁ Apache ÜÔÏ ÏÚÎÁÞÁÅÔ, ÞÔÏ
856	ÄÁÎÎÁÑ ÄÉÒÅËÔÏÒÉÑ ÄÏÌÖÎÁ ÆÏÒÍÉÒÏ×ÁÔØÓÑ Ó ÐÏÍÏÝØÀ
857	SymLinksIfOwnerMatch ÉÌÉ ×ÁÒÉÁÎÔÁ FollowSymLinks (ÂÏÌØÛÉÎÓÔ×Ï
858	ÉÎÓÔÁÌÌÑÃÉÊ Apache ÆÏÒÍÉÒÕÀÔ ÜÔÏÔ ÐÕÔØ ÐÏ ÕÍÏÌÞÁÎÉÀ)."
859
860	itext46="
861	îÅ ÚÁÂÕÄØÔÅ ËÏÎÆÉÇÕÒÉÒÏ×ÁÔØ ÷ÁÛ ÷ÅÂ-ÓÅÒ×ÅÒ ÔÁË, ÞÔÏÂÙ ÆÏÒÍÉÒÏ×ÁÔØ
862	×ÁÛ webserver, ÞÔÏÂÙ $gsdlhome ÂÙÌ ÄÏÓÔÕÐÅÎ ÉÚ ÓÅÔÉ. ÷ÁÍ ÂÕÄÅÔ
863	ÎÁÐÏÍÎÅÎÏ ÏÂ ÜÔÏÍ ÓÎÏ×Á × ËÏÎÃÅ ÄÁÎÎÏÊ ÉÎÓÔÁÌÌÑÃÉÏÎÎÏÊ ÐÒÏÃÅÄÕÒÙ."
864
865	# ------------------------------------------------------------------------------
866	# MORE SPANISH STRINGS
867	# ------------------------------------------------------------------------------
868	elif [ "$gsdllangcode" == "es" ]; then
869
870	itext9="
871	Si no se puede realizar la instalación o ésta se cancela, corra el guión
872	de desinstalación (${gsdlhome}/Uninstall.sh) para eliminar las partes
873	instaladas.
874	¿Desea continuar? [y]"
875
876	itext10="
877	Instalación de la estructura de directorios Greenstone en ${gsdlhome}"
878
879	itext11="
880	¿Le gustaría instalar la documentación de Greenstone en su disco duro?
881	Los documentos ocuparán aproximadamente 4 MB de espacio. Si decide no
882	instalarlos aún podrá tener acceso a ellos desde el directorio de
883	docs del CD-ROM) [y]"
884
885	itext12="
886	¿Le gustaría instalar el soporte para la función \"exportar a CD\" de
887	Greenstone? Esta función le permite exportar una colección Greenstone
888	en una forma que permita escribir en ella a un CD-ROM para Windows que
889	se podrá instalar automáticamente. Este paquete utilizará
890	aproximadamente 23 MB de espacio en el disco duro [n]"
891
892	itext18="Estableciendo los permisos..."
893
894	itext19="
895	Con el fin de que el usuario final pueda crear y construir una
896	colección, el programa cgi de Greenstone deberá ser capaz de escribir
897	en los directorios ${gsdlhome}/collect y ${gsdlhome}/tmp. En la
898	mayoría de los sistemas esto significa que deberá poderse escribir en
899	ellos globalmente.
900	¿Desea que se pueda escribir en estos directorios globalmente? [y]"
901
902	itext20="
903	Usted puede instalar los [b]inarios de Linux vinculados estáticamente
904	que se han compilado previamente (únicamente i386) o instalar y
905	[c]ompilar el código fuente de Greenstone."
906
907	itext21="Escriba \"[b]\" o \"c\""
908
909	itext22="Instalación de los binarios de Linux"
910
911	itext23="Instalación del código fuente"
912
913	itext24="configurando..."
914
915	itext25="compilando..."
916
917	itext26="instalando..."
918
919	itext27="ERROR: No se pudo compilar."
920
921	itext28="
922
923	Greenstone necesita un directorio ejecutable cgi que sea válido
924	(normalmente llamado cgi-bin en los sistemas UNIX) desde el cual se
925	pueda correr.
926	Este puede ser:
927	1. El directorio cgi-bin por omisión de Greenstone
928	(${gsdlhome}/cgi-bin). Si usted utiliza esta opción entonces
929	necesitará configurar su servidor Web para que trate a este
930	directorio como un directorio ejecutable cgi. En el caso del
931	servidor Web Apache se utiliza la directiva ScriptAlias para poder
932	hacer esto (los detalles de la forma de configurar su servidor Web
933	aparecerán al final de este proceso de instalación)."
934
935	itext29=" Recuerde que probablemente necesitará ayuda de su administrador
936	de sistemas para reconfigurar su servidor Web."
937
938	itext30=" 2. Un directorio cgi-bin existente. Normalmente se crea un
939	directorio cgi-bin al momento de instalar su servidor Web. En
940	términos generales este puede ser /home/httpd/cgi-bin,
941	/usr/local/apache/cgi-bin o /var/lib/apache/cgi-bin."
942
943	itext31=" Muchos sistemas también le permiten a sus usuarios tener sus
944	propios directorios individuales cgi-bin en
945	/home/username/public_html/cgi-bin."
946
947	itext32="Escriba \"[1]\" o \"2\""
948
949	itext33="
950	No olvide configurar su servidor Web para que trate a ${gsdlhome}/cgi-bin
951	como un directorio ejecutable cgi. No se preocupe, esto se le recordará
952	nuevamente al final del proceso de instalación."
953
954	itext37="Corra el guión de desinstalación (${gsdlhome}/Uninstall.sh) para
955	eliminar las partes instaladas."
956
957	itext42="
958
959	Para que Greenstone pueda funcionar, el directorio $gsdlhome y todos sus
960	contenidos deberán ser accesibles desde la Web.
961	Para lograr esto usted puede:
962	1. Configurar su servidor Web de tal manera que el mismo $gsdlhome sea
963	accesible desde la Web."
964
965	itext43=" 2. Proporcionar un directorio existente que sea accesible desde la
966	Web, a través del cual se creará un vínculo simbólico (ln -s) con
967	$gsdlhome. Cuando instaló su servidor seguramente se creó un
968	directorio accesible desde la Web (el servidor Apache utiliza la
969	directiva DocumentRoot para definir este directorio). En términos
970	generales este directorio podrá ser /home/httpd/html,
971	/usr/local/apache/htdocs o /var/lib/apache/htdocs."
972
973	itext44=" Muchos sistemas también le permiten a los usuarios tener sus
974	propios directorios individuales accesibles desde la Web
975	en /home/username/public_html."
976
977	itext45=" Recuerde que necesitará configurar su servidor Web para permitir
978	la creación de vínculos simbólicos desde el interior de este
979	directorio. En el caso del servidor Apache esto significa que
980	dicho directorio deberá configurarse con la opción
981	SymLinksIfOwnerMatch o FollowSymLinks (la mayoría de las
982	instalaciones Apache se configuran de esta manera por omisión)."
983
984	itext46="
985	No olvide configurar su servidor Web para hacer que $gsdlhome sea
986	accesible desde la Web. Se le recordará esto nuevamente al final del
987	proceso de instalación."
988
989	# ------------------------------------------------------------------------------
990	# MORE ENGLISH STRINGS
991	# ------------------------------------------------------------------------------
992	else
993
994	itext9="
995	If this installation fails or is cancelled, run the uninstall
996	script (${gsdlhome}/Uninstall.sh) to clean up the partial
997	installation.
998	Continue? [y]"
999
1000	itext10="
1001	Installing Greenstone directory structure to ${gsdlhome}"
1002
1003	itext11="
1004	Would you like to install the Greenstone documentation to your
1005	hard drive? The docs will use about 4Mb of space. If you choose
1006	not to install them you can still access them from within the
1007	docs directory of the cd-rom) [y]"
1008
1009	itext12="
1010	Would you like to install support for Greenstone's \"CD exporting\"
1011	function? This function allows you to export a Greenstone collection
1012	in a form suitable for writing to a self-installing Windows cd-rom.
1013	This package will use approximately 23Mb of disk space [n]"
1014
1015	itext18="Setting permissions ..."
1016
1017	itext19="
1018	In order for end-user collection building to be enabled the
1019	Greenstone cgi program must be able to write to the
1020	${gsdlhome}/collect and ${gsdlhome}/tmp directories.
1021	On most systems this means they must be globally writable.
1022	Make these directories globally writable? [y]"
1023
1024	itext20="
1025	You may either install pre-compiled, statically linked linux [b]inaries
1026	(i386 only) or install and [c]ompile the Greenstone source code"
1027
1028	itext21="Enter \"[b]\" or \"c\""
1029
1030	itext22="Installing linux binaries"
1031
1032	itext23="Installing source code"
1033
1034	itext24="configuring ..."
1035
1036	itext25="compiling ..."
1037
1038	itext26="installing ..."
1039
1040	itext27="ERROR: Compilation failed"
1041
1042	itext28="
1043
1044	Greenstone needs a valid cgi executable directory (normally called
1045	cgi-bin on unix systems) from which to run.
1046	This may be either:
1047	1. The default Greenstone cgi-bin directory (${gsdlhome}/cgi-bin).
1048	If you use the Greenstone default you will need to configure
1049	your webserver to treat this directory as a cgi executable
1050	directory. For the Apache webserver you use the ScriptAlias
1051	directive to do this (details of how to configure your webserver
1052	will be displayed at the end of this installation procedure)."
1053
1054	itext29=" Note that you will probably need help from your system
1055	administrator to reconfigure your webserver."
1056
1057	itext30=" 2. An existing cgi-bin directory. Normally a cgi-bin directory
1058	is created when your webserver is installed. Typically, this
1059	might be /home/httpd/cgi-bin, or /usr/local/apache/cgi-bin, or
1060	/var/lib/apache/cgi-bin."
1061
1062	itext31=" Many systems also allow individual users to have their own
1063	cgi-bin in /home/username/public_html/cgi-bin."
1064
1065	itext32="Enter \"[1]\" or \"2\""
1066
1067	itext33="
1068	Don't forget to configure your webserver to treat ${gsdlhome}/cgi-bin
1069	as a cgi executable directory. Don't worry, you'll be
1070	reminded of this again at the end of the installation
1071	procedure"
1072
1073	itext37="Run the uninstall script (${gsdlhome}/Uninstall.sh)
1074	to clean up the partial installation."
1075
1076	itext42="
1077
1078	In order for Greenstone to run, the $gsdlhome
1079	directory and all it contains must be accessible from the web.
1080	To make this happen you may either:
1081	1. Configure your webserver so that $gsdlhome
1082	is itself accessible from the web."
1083
1084	itext43=" 2. Provide an existing web accessible directory from which
1085	a symbolic link (ln -s) will be made to $gsdlhome.
1086	When your server was installed a web accessible directory
1087	will have been created (the Apache webserver uses the
1088	DocumentRoot directive to define this directory). Typically
1089	this directory might be /home/httpd/html, or /usr/local/apache/htdocs,
1090	or /var/lib/apache/htdocs."
1091
1092	itext44=" Many systems also allow individual users to have their own
1093	web accessible directory in /home/username/public_html."
1094
1095	itext45=" Note that your web server will need to be configured to allow
1096	symbolic links from within this directory. For the Apache
1097	server that means this directory must be configured with
1098	the SymLinksIfOwnerMatch or FollowSymLinks option (most Apache
1099	installations are configured this way by default)."
1100
1101	itext46="
1102	Don't forget to configure your webserver to make $gsdlhome
1103	accessible from the web. You'll be reminded of this again
1104	at the end of this installation procedure."
1105
1106	fi
1107
1108	msg="--> Install.sh: [$cmd_mkdir \"${gsdlhome}\"]"
1109	echo "$msg"
1110	log="${log}${msg}
1111	"
1112	$cmd_mkdir "$gsdlhome"
1113	if [ ! -d "$gsdlhome" ]; then
1114	echo "$itext8"
1115	echo "$itext0"
1116	exit 1
1117	fi
1118	# set permissions on gsdlhome directory
1119	msg="--> Install.sh: [$cmd_chmod u+rwx \"${gsdlhome}\"]"
1120	echo "$msg"
1121	log="${log}${msg}
1122	"
1123	$cmd_chmod u+rwx "$gsdlhome"
1124
1125	# create initial Uninstall.sh
1126	cd "$gsdlhome"
1127	echo "#!/bin/sh" > Uninstall.sh
1128	echo "" >> Uninstall.sh
1129	echo "echo \"remove ${gsdlhome} directory? [y]\"" >> Uninstall.sh
1130	echo "read ans" >> Uninstall.sh
1131	echo "if [ \"\$ans\" = \"\" ] \|\| [ \"\$ans\" = \"y\" ]; then" >> Uninstall.sh
1132	echo " $cmd_chmod -R u+rwx \"$gsdlhome\"" >> Uninstall.sh
1133	echo " $cmd_rmr \"$gsdlhome\"" >> Uninstall.sh
1134	echo "fi" >> Uninstall.sh
1135	$cmd_chmod u+x Uninstall.sh
1136	cd "$thisdir"
1137
1138	# create initial INSTALL_RECORD
1139	echo "$log" >> "${gsdlhome}/INSTALL_RECORD"
1140
1141	echo "$itext9"
1142	echo "$itext9" >> "${gsdlhome}/INSTALL_RECORD"
1143	printf "%s" "> "
1144	read ans
1145	echo "> $ans" >> "${gsdlhome}/INSTALL_RECORD"
1146	if [ "$ans" != "" ] && [ "$ans" != "y" ]; then
1147	msg="$itext0"
1148	echo "$msg"
1149	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1150	exit 0
1151	fi
1152
1153	echo "$itext10"
1154	echo "$itext10" >> "${gsdlhome}/INSTALL_RECORD"
1155
1156	# copy gsdl directory across
1157	msg="--> Install.sh: [$cmd_cpr \"${cd_dir}/gsdl/\"* \"$gsdlhome\"]"
1158	echo "$msg"
1159	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1160	$cmd_cpr "${cd_dir}/gsdl/"* "$gsdlhome"
1161
1162	# copy setup shell scripts across too
1163	msg="--> Install.sh: [$cmd_cp \"${cd_dir}/src/Unix/setup.\"* \"$gsdlhome\"]"
1164	echo "$msg"
1165	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1166	$cmd_cp "${cd_dir}/src/Unix/setup."* "$gsdlhome"
1167
1168	# make sure we have a tmp directory
1169	if [ ! -d "$gsdlhome/tmp" ]; then
1170	msg="--> Install.sh: [$cmd_mkdir \"$gsdlhome/tmp\"]"
1171	echo "$msg"
1172	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1173	$cmd_mkdir "${gsdlhome}/tmp"
1174	fi
1175
1176	# make collect directory writable so we can install collections
1177	msg="--> Install.sh: [$cmd_chmod u+rwx \"$gsdlhome/collect\"]"
1178	echo "$msg"
1179	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1180	$cmd_chmod u+rwx "$gsdlhome/collect"
1181
1182	if [ $iscdrom = "yes" ]; then
1183	# do we want docs directory?
1184	echo "$itext11"
1185	echo "$itext11" >> "${gsdlhome}/INSTALL_RECORD"
1186	printf "%s" "> "
1187	read ans
1188	echo "> $ans" >> "${gsdlhome}/INSTALL_RECORD"
1189	if [ "$ans" = "" ] \|\| [ "$ans" = "y" ]; then
1190	docs="yes"
1191	docs_dir="${cd_dir}/docs"
1192	if [ "$gsdllangcode" == "fr" ]; then
1193	docs_dir="${docs_dir}/french"
1194	elif [ "$gsdllangcode" == "ru" ]; then
1195	docs_dir="${docs_dir}/russian"
1196	elif [ "$gsdllangcode" == "es" ]; then
1197	docs_dir="${docs_dir}/spanish"
1198	else
1199	docs_dir="${docs_dir}/english"
1200	fi
1201	msg="--> Install.sh: [$cmd_cpr \"${docs_dir}\" \"$gsdlhome/docs\"]"
1202	echo "$msg"
1203	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1204	$cmd_cpr "${docs_dir}" "$gsdlhome/docs"
1205	fi
1206
1207	# do we want the "CD exporting" stuff?
1208	echo "$itext12"
1209	echo "$itext12" >> "${gsdlhome}/INSTALL_RECORD"
1210	printf "%s" "> "
1211	read ans
1212	echo "> $ans" >> "${gsdlhome}/INSTALL_RECORD"
1213	if [ "$ans" = "Y" ] \|\| [ "$ans" = "y" ]; then
1214	export="yes"
1215	msg="--> Install.sh: [$cmd_chmod u+rw \"${gsdlhome}/bin\"]"
1216	echo "$msg"
1217	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1218	$cmd_chmod u+rw "${gsdlhome}/bin"
1219
1220	msg="--> Install.sh: [$cmd_mkdir \"${gsdlhome}/bin/windows\"]"
1221	echo "$msg"
1222	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1223	$cmd_mkdir "${gsdlhome}/bin/windows"
1224
1225	msg="--> Install.sh: [$cmd_cpr \"${cd_dir}/Windows/bin/windows/netscape\" \"${gsdlhome}/bin/windows\"]"
1226	echo "$msg"
1227	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1228	$cmd_cpr "${cd_dir}/Windows/bin/windows/netscape" "${gsdlhome}/bin/windows"
1229
1230	msg="--> Install.sh: [$cmd_cpr \"${cd_dir}/Windows/bin/windows/Win32s\" \"${gsdlhome}/bin/windows\"]"
1231	echo "$msg"
1232	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1233	$cmd_cpr "${cd_dir}/Windows/bin/windows/Win32s" "${gsdlhome}/bin/windows"
1234
1235	msg="--> Install.sh: [$cmd_cpr \"${cd_dir}/Windows/bin/windows/net16\" \"${gsdlhome}/bin/windows\"]"
1236	echo "$msg"
1237	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1238	$cmd_cpr "${cd_dir}/Windows/bin/windows/net16" "${gsdlhome}/bin/windows"
1239
1240	msg="--> Install.sh: [$cmd_cpr \"${cd_dir}/Windows/bin/windows/net32\" \"${gsdlhome}/bin/windows\"]"
1241	echo "$msg"
1242	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1243	$cmd_cpr "${cd_dir}/Windows/bin/windows/net32" "${gsdlhome}/bin/windows"
1244
1245	msg="--> Install.sh: [$cmd_cp \"${cd_dir}/Windows/bin/windows/server.exe\" \"${gsdlhome}/bin/windows\"]"
1246	echo "$msg"
1247	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1248	$cmd_cp "${cd_dir}/Windows/bin/windows/server.exe" "${gsdlhome}/bin/windows"
1249
1250	msg="--> Install.sh: [$cmd_cp \"${cd_dir}/Windows/bin/windows/gssetup.exe\" \"${gsdlhome}/bin/windows\"]"
1251	echo "$msg"
1252	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1253	$cmd_cp "${cd_dir}/Windows/bin/windows/gssetup.exe" "${gsdlhome}/bin/windows"
1254
1255	msg="--> Install.sh: [$cmd_cp \"${cd_dir}/Windows/bin/windows/setpw.exe\" \"${gsdlhome}/bin/windows\"]"
1256	echo "$msg"
1257	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1258	$cmd_cp "${cd_dir}/Windows/bin/windows/setpw.exe" "${gsdlhome}/bin/windows"
1259
1260	msg="--> Install.sh: [$cmd_cp \"${cd_dir}/Windows/bin/windows/Setup.exe\" \"${gsdlhome}/bin/windows\"]"
1261	echo "$msg"
1262	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1263	$cmd_cp "${cd_dir}/Windows/bin/windows/Setup.exe" "${gsdlhome}/bin/windows"
1264	fi
1265
1266
1267	# which collections do we want
1268	cd "${cd_dir}/collect"
1269	echo "$itextdoccols"
1270	echo "$itextdoccols" >> "${gsdlhome}/INSTALL_RECORD"
1271	printf "%s" "> "
1272	read ans
1273	echo "> $ans" >> "${gsdlhome}/INSTALL_RECORD"
1274	if [ "$ans" = "" ] \|\| [ "$ans" = "y" ]; then
1275
1276	# Documented example collections have a customised home.dm
1277	$cmd_cp "${cd_dir}/collect/home.dm" "${gsdlhome}/macros"
1278
1279	# dls-e
1280	echo "$itextdec_dls"
1281	echo "$itextdec_dls" >> "${gsdlhome}/INSTALL_RECORD"
1282	printf "%s" "> "
1283	read ans
1284	echo "> $ans" >> "${gsdlhome}/INSTALL_RECORD"
1285	if [ "$ans" = "" ] \|\| [ "$ans" = "y" ]; then
1286
1287	msg="--> Install.sh: [$cmd_cpr \"${cd_dir}/collect/dls-e\" \"${gsdlhome}/collect\"]"
1288	echo "$msg"
1289	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1290	$cmd_cpr "${cd_dir}/collect/dls-e" "${gsdlhome}/collect"
1291	fi
1292
1293	# wrdpdf-e
1294	echo "$itextdec_wrdpdf"
1295	echo "$itextdec_wrdpdf" >> "${gsdlhome}/INSTALL_RECORD"
1296	printf "%s" "> "
1297	read ans
1298	echo "> $ans" >> "${gsdlhome}/INSTALL_RECORD"
1299	if [ "$ans" = "" ] \|\| [ "$ans" = "y" ]; then
1300
1301	msg="--> Install.sh: [$cmd_cpr \"${cd_dir}/collect/wrdpdf-e\" \"${gsdlhome}/collect\"]"
1302	echo "$msg"
1303	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1304	$cmd_cpr "${cd_dir}/collect/wrdpdf-e" "${gsdlhome}/collect"
1305	fi
1306
1307	# gsarch-e
1308	echo "$itextdec_gsarch"
1309	echo "$itextdec_gsarch" >> "${gsdlhome}/INSTALL_RECORD"
1310	printf "%s" "> "
1311	read ans
1312	echo "> $ans" >> "${gsdlhome}/INSTALL_RECORD"
1313	if [ "$ans" = "" ] \|\| [ "$ans" = "y" ]; then
1314
1315	msg="--> Install.sh: [$cmd_cpr \"${cd_dir}/collect/gsarch-e\" \"${gsdlhome}/collect\"]"
1316	echo "$msg"
1317	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1318	$cmd_cpr "${cd_dir}/collect/gsarch-e" "${gsdlhome}/collect"
1319	fi
1320
1321	# cltbib-e
1322	echo "$itextdec_cltbib"
1323	echo "$itextdec_cltbib" >> "${gsdlhome}/INSTALL_RECORD"
1324	printf "%s" "> "
1325	read ans
1326	echo "> $ans" >> "${gsdlhome}/INSTALL_RECORD"
1327	if [ "$ans" = "" ] \|\| [ "$ans" = "y" ]; then
1328
1329	msg="--> Install.sh: [$cmd_cpr \"${cd_dir}/collect/cltbib-e\" \"${gsdlhome}/collect\"]"
1330	echo "$msg"
1331	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1332	$cmd_cpr "${cd_dir}/collect/cltbib-e" "${gsdlhome}/collect"
1333	fi
1334
1335	# cltext-e
1336	echo "$itextdec_cltext"
1337	echo "$itextdec_cltext" >> "${gsdlhome}/INSTALL_RECORD"
1338	printf "%s" "> "
1339	read ans
1340	echo "> $ans" >> "${gsdlhome}/INSTALL_RECORD"
1341	if [ "$ans" = "" ] \|\| [ "$ans" = "y" ]; then
1342
1343	msg="--> Install.sh: [$cmd_cpr \"${cd_dir}/collect/cltext-e\" \"${gsdlhome}/collect\"]"
1344	echo "$msg"
1345	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1346	$cmd_cpr "${cd_dir}/collect/cltext-e" "${gsdlhome}/collect"
1347	fi
1348
1349	# MARC-e
1350	echo "$itextdec_marc"
1351	echo "$itextdec_marc" >> "${gsdlhome}/INSTALL_RECORD"
1352	printf "%s" "> "
1353	read ans
1354	echo "> $ans" >> "${gsdlhome}/INSTALL_RECORD"
1355	if [ "$ans" = "" ] \|\| [ "$ans" = "y" ]; then
1356
1357	msg="--> Install.sh: [$cmd_cpr \"${cd_dir}/collect/MARC-e\" \"${gsdlhome}/collect\"]"
1358	echo "$msg"
1359	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1360	$cmd_cpr "${cd_dir}/collect/MARC-e" "${gsdlhome}/collect"
1361	fi
1362
1363	# oai-e
1364	echo "$itextdec_oai"
1365	echo "$itextdec_oai" >> "${gsdlhome}/INSTALL_RECORD"
1366	printf "%s" "> "
1367	read ans
1368	echo "> $ans" >> "${gsdlhome}/INSTALL_RECORD"
1369	if [ "$ans" = "" ] \|\| [ "$ans" = "y" ]; then
1370
1371	msg="--> Install.sh: [$cmd_cpr \"${cd_dir}/collect/oai-e\" \"${gsdlhome}/collect\"]"
1372	echo "$msg"
1373	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1374	$cmd_cpr "${cd_dir}/collect/oai-e" "${gsdlhome}/collect"
1375	fi
1376
1377	# image-e
1378	echo "$itextdec_image"
1379	echo "$itextdec_image" >> "${gsdlhome}/INSTALL_RECORD"
1380	printf "%s" "> "
1381	read ans
1382	echo "> $ans" >> "${gsdlhome}/INSTALL_RECORD"
1383	if [ "$ans" = "" ] \|\| [ "$ans" = "y" ]; then
1384
1385	msg="--> Install.sh: [$cmd_cpr \"${cd_dir}/collect/image-e\" \"${gsdlhome}/collect\"]"
1386	echo "$msg"
1387	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1388	$cmd_cpr "${cd_dir}/collect/image-e" "${gsdlhome}/collect"
1389	fi
1390
1391	# authen-e
1392	echo "$itextdec_authen"
1393	echo "$itextdec_authen" >> "${gsdlhome}/INSTALL_RECORD"
1394	printf "%s" "> "
1395	read ans
1396	echo "> $ans" >> "${gsdlhome}/INSTALL_RECORD"
1397	if [ "$ans" = "" ] \|\| [ "$ans" = "y" ]; then
1398
1399	msg="--> Install.sh: [$cmd_cpr \"${cd_dir}/collect/authen-e\" \"${gsdlhome}/collect\"]"
1400	echo "$msg"
1401	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1402	$cmd_cpr "${cd_dir}/collect/authen-e" "${gsdlhome}/collect"
1403	fi
1404
1405	# garish-e
1406	echo "$itextdec_garish"
1407	echo "$itextdec_garish" >> "${gsdlhome}/INSTALL_RECORD"
1408	printf "%s" "> "
1409	read ans
1410	echo "> $ans" >> "${gsdlhome}/INSTALL_RECORD"
1411	if [ "$ans" = "" ] \|\| [ "$ans" = "y" ]; then
1412
1413	msg="--> Install.sh: [$cmd_cpr \"${cd_dir}/collect/garish\" \"${gsdlhome}/collect\"]"
1414	echo "$msg"
1415	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1416	$cmd_cpr "${cd_dir}/collect/garish" "${gsdlhome}/collect"
1417	fi
1418
1419	# isis-e
1420	echo "$itextdec_isis"
1421	echo "$itextdec_isis" >> "${gsdlhome}/INSTALL_RECORD"
1422	printf "%s" "> "
1423	read ans
1424	echo "> $ans" >> "${gsdlhome}/INSTALL_RECORD"
1425	if [ "$ans" = "" ] \|\| [ "$ans" = "y" ]; then
1426
1427	msg="--> Install.sh: [$cmd_cpr \"${cd_dir}/collect/isis-e\" \"${gsdlhome}/collect\"]"
1428	echo "$msg"
1429	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1430	$cmd_cpr "${cd_dir}/collect/isis-e" "${gsdlhome}/collect"
1431	fi
1432	fi
1433	fi
1434
1435	# set permissions
1436	msg="
1437	$itext18
1438	--> Install.sh: [$cmd_chmod -R u+rw \"$gsdlhome\"]
1439	--> Install.sh: [$cmd_chmod a+x \"${gsdlhome}/bin/script/\"*]"
1440	echo "$msg"
1441	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1442	$cmd_chmod -R u+rw "$gsdlhome"
1443	$cmd_chmod a+x "${gsdlhome}/bin/script/"*
1444
1445	# certain files in gsdl/etc need to be globally writable
1446	msg="--> Install.sh: [$cmd_chmod a+w \"$gsdlhome/etc/error.txt\"]"
1447	echo "$msg"
1448	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1449	$cmd_chmod a+w "$gsdlhome/etc/error.txt"
1450	msg="--> Install.sh: [$cmd_chmod a+w \"$gsdlhome/etc/key.db\"]"
1451	echo "$msg"
1452	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1453	$cmd_chmod a+w "$gsdlhome/etc/key.db"
1454	msg="--> Install.sh: [$cmd_chmod a+w \"$gsdlhome/etc/users.db\"]"
1455	echo "$msg"
1456	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1457	$cmd_chmod a+w "$gsdlhome/etc/users.db"
1458	msg="--> Install.sh: [$cmd_chmod a+w \"$gsdlhome/etc/main.cfg\"]"
1459	echo "$msg"
1460	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1461	$cmd_chmod a+w "$gsdlhome/etc/main.cfg"
1462	msg="--> Install.sh: [$cmd_chmod a+w \"$gsdlhome/etc/history.db\"]"
1463	echo "$msg"
1464	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1465	$cmd_chmod a+w "$gsdlhome/etc/history.db"
1466	msg="--> Install.sh: [$cmd_chmod a+w \"$gsdlhome/etc/usage.txt\"]"
1467	echo "$msg"
1468	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1469	$cmd_chmod a+w "$gsdlhome/etc/usage.txt"
1470
1471
1472	# should gsdl/collect and gsdl/tmp be globally writable?
1473	echo "$itext19"
1474	echo "$itext19" >> "${gsdlhome}/INSTALL_RECORD"
1475	printf "%s" "> "
1476	read ans
1477	echo "> $ans" >> "${gsdlhome}/INSTALL_RECORD"
1478	if [ "$ans" = "" ] \|\| [ "$ans" = "y" ]; then
1479	msg="--> Install.sh: [$cmd_chmod -R a+w \"$gsdlhome/collect\"]"
1480	echo "$msg"
1481	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1482	$cmd_chmod -R a+w "$gsdlhome/collect"
1483	msg="--> Install.sh: [$cmd_chmod -R a+w \"$gsdlhome/tmp\"]"
1484	echo "$msg"
1485	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1486	$cmd_chmod -R a+w "$gsdlhome/tmp"
1487	fi
1488
1489	# binaries or source code?
1490	compile="yes"
1491	if [ "$gsdlos" = "linux" ]; then
1492	echo "$itext20"
1493	echo "$itext20" >> "${gsdlhome}/INSTALL_RECORD"
1494
1495	found=no
1496	while [ "$found" = "no" ]; do
1497	echo "$itext21"
1498	echo "$itext21" >> "${gsdlhome}/INSTALL_RECORD"
1499	printf "%s" "> "
1500	read ans
1501	echo "> $ans" >> "${gsdlhome}/INSTALL_RECORD"
1502	if [ "$ans" = "" ] \|\| [ "$ans" = "b" ]; then
1503	compile="no"
1504	# install binaries
1505	msg="
1506	$itext22
1507	--> Install.sh: [$cmd_cpr \"${cd_dir}/Unix/bin/linux\" \"${gsdlhome}/bin\"]"
1508	echo "$msg"
1509	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1510	$cmd_cpr "${cd_dir}/Unix/bin/linux" "${gsdlhome}/bin"
1511	msg="--> Install.sh: [$cmd_chmod a+x \"${gsdlhome}/bin/linux/\"*]"
1512	echo "$msg"
1513	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1514	$cmd_chmod a+x "${gsdlhome}/bin/linux/"*
1515	msg="--> Install.sh: [$cmd_chmod -R u+rw \"${gsdlhome}/bin/linux\"]"
1516	echo "$msg"
1517	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1518	$cmd_chmod -R u+rw "${gsdlhome}/bin/linux"
1519
1520	# move library executable to cgi-bin
1521	msg="--> Install.sh: [$cmd_mv \"${gsdlhome}/bin/linux/library\" \"${gsdlhome}/cgi-bin\"]"
1522	echo "$msg"
1523	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1524	$cmd_mv "${gsdlhome}/bin/linux/library" "${gsdlhome}/cgi-bin"
1525
1526	# move oaiserver executable to cgi-bin
1527	msg="--> Install.sh: [$cmd_mv \"${gsdlhome}/bin/linux/oaiserver\" \"${gsdlhome}/cgi-bin\"]"
1528	echo "$msg"
1529	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1530	$cmd_mv "${gsdlhome}/bin/linux/oaiserver" "${gsdlhome}/cgi-bin"
1531
1532	found="yes"
1533	elif [ "$ans" = "c" ]; then
1534	found="yes"
1535	fi
1536	done
1537	fi
1538
1539	if [ "$compile" = "yes" ]; then
1540	# install source
1541	msg="
1542	$itext23
1543	--> Install.sh: [$cmd_cpr \"${cd_dir}/src/lib\" \"$gsdlhome\"]"
1544	echo "$msg"
1545	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1546	$cmd_cpr "${cd_dir}/src/lib" "$gsdlhome"
1547	msg="--> Install.sh: [$cmd_cpr \"${cd_dir}/src/packages\" \"$gsdlhome\"]"
1548	echo "$msg"
1549	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1550	$cmd_cpr "${cd_dir}/src/packages" "$gsdlhome"
1551	msg="--> Install.sh: [$cmd_cpr \"${cd_dir}/src/src\" \"$gsdlhome\"]"
1552	echo "$msg"
1553	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1554	$cmd_cpr "${cd_dir}/src/src" "$gsdlhome"
1555	msg="--> Install.sh: [$cmd_cpr \"${cd_dir}/src/Unix/\"* \"$gsdlhome\"]"
1556	echo "$msg"
1557	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1558	$cmd_cpr "${cd_dir}/src/Unix/"* "$gsdlhome"
1559	msg="--> Install.sh: [$cmd_cp \"${cd_dir}/src/Install.txt\" \"$gsdlhome\"]"
1560	echo "$msg"
1561	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1562	$cmd_cp "${cd_dir}/src/Install.txt" "$gsdlhome"
1563	msg="--> Install.sh: [$cmd_chmod -R u+rw \"$gsdlhome\"]"
1564	echo "$msg"
1565	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1566	$cmd_chmod -R u+rw "$gsdlhome"
1567	msg="--> Install.sh: [$cmd_chmod a+x \"${gsdlhome}/configure\"]"
1568	echo "$msg"
1569	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1570	$cmd_chmod a+x "${gsdlhome}/configure"
1571	msg="--> Install.sh: [$cmd_chmod a+x \"${gsdlhome}/packages/yaz/configure\"]"
1572	echo "$msg"
1573	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1574	$cmd_chmod a+x "${gsdlhome}/packages/yaz/configure"
1575
1576	# compile it
1577	msg="--> Install.sh: [cd $gsdlhome]"
1578	echo "$msg"
1579	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1580	cd "$gsdlhome"
1581	msg="$itext24
1582
1583	--> Install.sh: [./configure]"
1584	echo "$msg"
1585	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1586	./configure
1587	msg="$itext25
1588
1589	--> Install.sh: [make]"
1590	echo "$msg"
1591	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1592	$make
1593	msg="$itext26
1594
1595	--> Install.sh: [make install]"
1596	echo "$msg"
1597	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1598	$make install
1599	msg="--> Install.sh: [cd $thisdir]"
1600	echo "$msg"
1601	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1602	cd "$thisdir"
1603
1604	# check that things compiled ok
1605	if [ ! -f "${gsdlhome}/cgi-bin/library" ]; then
1606	msg="$itext27
1607	$itext0
1608	$itext37"
1609	echo "$msg"
1610	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1611	exit 1
1612	fi
1613	fi
1614
1615
1616	# try to find out hostname
1617	if [ "$gsdlos" = "linux" ]; then
1618	gsdlhost=`hostname -f`
1619	if [ "$gsdlhost" = "" ]; then
1620	gsdlhost=`hostname -i`
1621	fi
1622	fi
1623	if [ "$gsdlhost" = "" ]; then
1624	gsdlhost=`hostname`
1625	fi
1626	if [ "$gsdlhost" = "" ]; then
1627	gsdlhost="your-computer-name"
1628	fi
1629
1630
1631	# get cgi-bin directory
1632	echo "$itext28"
1633	echo "$itext28" >> "${gsdlhome}/INSTALL_RECORD"
1634	if [ "$logname" != "root" ]; then
1635	echo "$itext29"
1636	echo "$itext29" >> "${gsdlhome}/INSTALL_RECORD"
1637	fi
1638	echo "$itext30"
1639	echo "$itext30" >> "${gsdlhome}/INSTALL_RECORD"
1640	if [ "$logname" != "root" ]; then
1641	echo "$itext31"
1642	echo "$itext31" >> "${gsdlhome}/INSTALL_RECORD"
1643	fi
1644	found=no
1645	remind_cgi="no"
1646	remind_cgi_nomove="no"
1647	while [ "$found" = "no" ]; do
1648	echo "$itext32"
1649	echo "$itext32" >> "${gsdlhome}/INSTALL_RECORD"
1650	printf "%s" "> "
1651	read ans
1652	echo "> $ans" >> "${gsdlhome}/INSTALL_RECORD"
1653	if [ "$ans" = "" ] \|\| [ "$ans" = "1" ]; then
1654	found="option1"
1655	cgi_bin="${gsdlhome}/cgi-bin"
1656	# default gsdl cgi-bin, do nothing
1657
1658	echo "$itext33"
1659	echo "$itext33" >> "${gsdlhome}/INSTALL_RECORD"
1660	remind_cgi="yes"
1661	elif [ "$ans" = "2" ]; then
1662	found="option2"
1663	# external cgi-bin
1664
1665	echo "$itext34"
1666	echo "$itext34" >> "${gsdlhome}/INSTALL_RECORD"
1667	printf "%s" "> "
1668	read ans
1669	echo "> $ans" >> "${gsdlhome}/INSTALL_RECORD"
1670	if [ "$ans" = "" ]; then
1671	cgi_bin="/usr/local/apache/cgi-bin"
1672	else
1673	cgi_bin="$ans"
1674	fi
1675
1676	# ------------------------------------------------------------------------------
1677	# MORE FRENCH STRINGS
1678	# ------------------------------------------------------------------------------
1679	if [ "$gsdllangcode" == "fr" ]; then
1680
1681	itext35="Avertissement: Le répertoire ${cgi_bin} n'existe pas.
1682	Voulez-vous le créer? [y]"
1683
1684	itext36="N'oubliez pas de configurer votre serveur Web pour considérer
1685	${gsdlhome}/cgi-bin comme le répertoire cgi exécutable. Ne vous en faites
1686	pas, on vous le rappellera encore une fois à la fin la fin de la procédure
1687	d'installation."
1688
1689	itext38="ERREUR: la création du répertoire $cgi_bin a échoué"
1690
1691	itext39="
1692	Impossible d'écrire dans le répertoire $cgi_bin . Vous devrez copier le
1693	contenu du répertoire ${gsdlhome}/cgi-bin dans le répertoire $cgi_bin une
1694	fois cette installation terminée. On vous le rappellera encore une fois à
1695	la fin la fin de la procédure d'installation."
1696
1697	itext40="
1698	Installation des programmes cgi Greenstone dans $cgi_bin"
1699
1700	# ------------------------------------------------------------------------------
1701	# MORE RUSSIAN STRINGS
1702	# ------------------------------------------------------------------------------
1703	elif [ "$gsdllangcode" == "ru" ]; then
1704
1705	itext35="ðÒÅÄÕÐÒÅÖÄÅÎÉÅ: ${cgi_bin} ÄÉÒÅËÔÏÒÉÑ ÎÅ ÓÕÝÅÓÔ×ÕÅÔ.
1706	óÏÚÄÁÔØ ÅÅ? [y]"
1707
1708	itext36="îÅ ÚÁÂÕÄØÔÅ ÓËÏÎÆÉÇÕÒÉÒÏ×ÁÔØ ÷ÁÛ ÷ÅÂ-ÓÅÒ×ÅÒ ÔÁËÉÍ ÏÂÒÁÚÏÍ, ÞÔÏÂÙ
1709	ÓÄÅÌÁÔØ $cgi_bin × ËÁÞÅÓÔ×Å cgi ×ÙÐÏÌÎÉÍÏÊ ÄÉÒÅËÔÏÒÉÉ. îÅ ×ÏÌÎÕÊÔÅÓØ,
1710	ÅÓÌÉ × ËÏÎÃÅ ÉÎÓÔÁÌÌÑÃÉÉ ÷ÁÍ ÂÕÄÅÔ ÎÁÐÏÍÎÅÎÏ ÏÂ ÜÔÏÍ ÓÎÏ×Á."
1711
1712	itext38="ïûéâëá: ÎÅ ÕÄÁÌÏÓØ ÓÏÚÄÁÔØ ÄÉÒÅËÔÏÒÉÀ $cgi_bin"
1713
1714	itext39="
1715	îÅ×ÏÚÍÏÖÎÏ ÐÉÓÁÔØ × ÄÉÒÅËÔÏÒÉÉ $cgi_bin. ÷ÁÍ ÎÅÏÂÈÏÄÉÍÏ ÓËÏÐÉÒÏ×ÁÔØ
1716	ÓÏÄÅÒÖÁÎÉÅ ${gsdlhome}/cgi-bin × $cgi_bin ÐÏÓÌÅ ÞÅÇÏ ÉÎÓÔÁÌÌÑÃÉÑ ÂÕÄÅÔ
1717	ÚÁËÏÎÞÅÎÁ. ÷ÁÍ ÂÕÄÅÔ ÎÁÐÏÍÎÅÎÏ ÏÂ ÜÔÏÍ ÓÎÏ×Á × ËÏÎÃÅ ÉÎÓÔÁÌÑÃÉÏÎÎÏÊ
1718	ÐÒÏÃÅÄÕÒÙ."
1719
1720	itext40="
1721	éÎÓÔÁÌÌÑÃÉÑ cgi-ÐÒÏÇÒÁÍÍÙ Greenstone × $cgi_bin"
1722
1723	# ------------------------------------------------------------------------------
1724	# MORE SPANISH STRINGS
1725	# ------------------------------------------------------------------------------
1726	elif [ "$gsdllangcode" == "es" ]; then
1727
1728	itext35="Advertencia: El directorio ${cgi_bin} no existe.
1729	¿Desea crearlo? [y]"
1730
1731	itext36="No olvide configurar su servidor Web para que trate a $cgi_bin como
1732	un directorio ejecutable cgi. No se preocupe, esto se le recordará
1733	nuevamente al final del proceso de instalación."
1734
1735	itext38="ERROR: El directorio $cgi_bin no se pudo crear."
1736
1737	itext39="
1738	No se puede escribir en el directorio $cgi_bin. Usted necesitará copiar
1739	los contenidos de ${gsdlhome}/cgi-bin en $cgi_bin después de que la
1740	instalación esté completa. Se le recordará esto nuevamente al final del
1741	proceso de instalación."
1742
1743	itext40="
1744	Instalación de los programas cgi de Greenstone en $cgi_bin"
1745
1746	# ------------------------------------------------------------------------------
1747	# MORE ENGLISH STRINGS
1748	# ------------------------------------------------------------------------------
1749	else
1750
1751	itext35="Warning: The ${cgi_bin} directory does not exist.
1752	Create it? [y]"
1753
1754	itext36="Don't forget to configure your webserver to treat $cgi_bin
1755	as a cgi executable directory. Don't worry, you'll be
1756	reminded of this again at the end of the installation
1757	procedure"
1758
1759	itext38="ERROR: failed to create $cgi_bin directory"
1760
1761	itext39="
1762	Unable to write to $cgi_bin directory. You will need
1763	to copy the contents of ${gsdlhome}/cgi-bin
1764	to $cgi_bin after this installation is completed.
1765	You'll be reminded of this again at the end of the
1766	installation procedure."
1767
1768	itext40="
1769	Installing Greenstone cgi programs in $cgi_bin"
1770
1771	fi
1772
1773	if [ ! -d "$cgi_bin" ]; then
1774
1775	echo "$itext35"
1776	echo "$itext35" >> "${gsdlhome}/INSTALL_RECORD"
1777	printf "%s" "> "
1778	read ans
1779	echo "> $ans" >> "${gsdlhome}/INSTALL_RECORD"
1780	if [ "$ans" = "" ] \|\| [ "$ans" = "y" ]; then
1781	msg="--> Install.sh: [$cmd_mkdir \"$cgi_bin\"]"
1782	echo "$msg"
1783	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1784	$cmd_mkdir "$cgi_bin"
1785	if [ -d "$cgi_bin" ]; then
1786	echo "$itext36"
1787	echo "$itext36" >> "${gsdlhome}/INSTALL_RECORD"
1788	remind_cgi="yes"
1789	else
1790	msg="$itext38
1791	$itext0
1792	$itext37"
1793	echo "$msg"
1794	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1795	exit 1
1796	fi
1797	fi
1798	fi
1799
1800	if [ ! -w "$cgi_bin" ]; then
1801	echo "$itext39"
1802	echo "$itext39" >> "${gsdlhome}/INSTALL_RECORD"
1803	remind_cgi_nomove="yes"
1804	else
1805	# install cgi-bin stuff (update the uninstall script first)
1806	cd "$gsdlhome"
1807	echo "#!/bin/sh" > Uninstall.sh
1808	echo "" >> Uninstall.sh
1809	echo "$cmd_rm \"${cgi_bin}/gsdlsite.cfg\"" >> Uninstall.sh
1810	echo "$cmd_rm \"${cgi_bin}/library\"" >> Uninstall.sh
1811	echo "echo \"remove ${gsdlhome} directory? [y]\"" >> Uninstall.sh
1812	echo "read ans" >> Uninstall.sh
1813	echo "if [ \"\$ans\" = \"\" ] \|\| [ \"\$ans\" = \"y\" ]; then" >> Uninstall.sh
1814	echo " $cmd_rmr \"$gsdlhome\"" >> Uninstall.sh
1815	echo "fi" >> Uninstall.sh
1816	$cmd_chmod u+x Uninstall.sh
1817	cd "$thisdir"
1818
1819	msg="$itext40
1820	--> Install.sh: [$cmd_mv \"${gsdlhome}/cgi-bin/gsdlsite.cfg\" \"$cgi_bin\"]"
1821	echo "$msg"
1822	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1823	$cmd_mv "${gsdlhome}/cgi-bin/gsdlsite.cfg" "$cgi_bin"
1824	msg="--> Install.sh: [$cmd_mv \"${gsdlhome}/cgi-bin/library\" \"$cgi_bin\"]"
1825	echo "$msg"
1826	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1827	$cmd_mv "${gsdlhome}/cgi-bin/library" "$cgi_bin"
1828	msg="--> Install.sh: [$cmd_mv \"${gsdlhome}/cgi-bin/oaiserver\" \"$cgi_bin\"]"
1829	echo "$msg"
1830	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1831	$cmd_mv "${gsdlhome}/cgi-bin/oaiserver" "$cgi_bin"
1832	fi
1833	fi
1834	done
1835
1836	# web address of cgi-bin
1837	web_cgi="http://${gsdlhost}/cgi-bin"
1838	if [ "$found" = "option1" ]; then
1839	web_cgi="http://${gsdlhost}/gsdl/cgi-bin"
1840	fi
1841
1842	# ------------------------------------------------------------------------------
1843	# MORE FRENCH STRINGS
1844	# ------------------------------------------------------------------------------
1845	if [ "$gsdllangcode" == "fr" ]; then
1846
1847	itext41="
1848	Veuillez entrer l'adresse Web du répertoire $cgi_bin. En général, c'est
1849	http://localhost/cgi-bin, ou http://127.0.0.1/cgi-bin, ou
1850	http://votre-ordinateur-nom/cgi-bin, ou http://nnn.nnn.nnn.nn/cgi-bin.
1851	[$web_cgi]"
1852
1853	# ------------------------------------------------------------------------------
1854	# MORE RUSSIAN STRINGS
1855	# ------------------------------------------------------------------------------
1856	elif [ "$gsdllangcode" == "ru" ]; then
1857
1858	itext41="
1859	ðÏÖÁÌÕÊÓÔÁ, ××ÅÄÉÔÅ ÷ÅÂ-ÁÄÒÅÓ ÄÉÒÅËÔÏÒÉÉ $cgi_bin. ïÂÙÞÎÏ ÜÔÏ ÍÏÖÅÔ
1860	ÂÙÔØ http://localhost/cgi-bin, ÉÌÉ http://127.0.0.1/cgi-bin, ÉÌÉ
1861	http://your-computer-name/cgi-bin ÉÌÉ http://nnn.nnn.nnn.nn/cgi-bin.
1862	[$web_cgi]."
1863
1864	# ------------------------------------------------------------------------------
1865	# MORE SPANISH STRINGS
1866	# ------------------------------------------------------------------------------
1867	elif [ "$gsdllangcode" == "es" ]; then
1868
1869	itext41="
1870	Por favor ingrese la dirección Web del directorio $cgi_bin. En términos
1871	generales éste puede ser http://localhost/cgi-bin,
1872	http://127.0.0.1/cgi-bin, http://your-computer-name/cgi-bin o
1873	http://nnn.nnn.nnn.nn/cgi-bin. [$web_cgi]"
1874
1875	# ------------------------------------------------------------------------------
1876	# MORE ENGLISH STRINGS
1877	# ------------------------------------------------------------------------------
1878	else
1879
1880	itext41="
1881	Please enter the web address of the $cgi_bin
1882	directory. Typically this might be http://localhost/cgi-bin,
1883	or http://127.0.0.1/cgi-bin, or http://your-computer-name/cgi-bin,
1884	or http://nnn.nnn.nnn.nn/cgi-bin. [$web_cgi]"
1885
1886	fi
1887
1888	echo "$itext41"
1889	echo "$itext41" >> "${gsdlhome}/INSTALL_RECORD"
1890	printf "%s" "> "
1891	read ans
1892	echo "> $ans" >> "${gsdlhome}/INSTALL_RECORD"
1893	if [ "$ans" != "" ]; then
1894	web_cgi="$ans"
1895	fi
1896
1897	# get public_html directory
1898	echo "$itext42"
1899	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
1900	if [ "$logname" != "root" ]; then
1901	echo "$itext29"
1902	echo "$itext29" >> "${gsdlhome}/INSTALL_RECORD"
1903	fi
1904	echo "$itext43"
1905	echo "$itext43" >> "${gsdlhome}/INSTALL_RECORD"
1906	if [ "$logname" != "root" ]; then
1907	echo "$itext44"
1908	echo "$itext44" >> "${gsdlhome}/INSTALL_RECORD"
1909	fi
1910	echo "$itext45"
1911	echo "$itext45" >> "${gsdlhome}/INSTALL_RECORD"
1912	found="no"
1913	remind_ph="no"
1914	remind_ph_nolink="no"
1915	while [ "$found" = "no" ]; do
1916	echo "$itext32"
1917	echo "$itext32" >> "${gsdlhome}/INSTALL_RECORD"
1918	printf "%s" "> "
1919	read ans
1920	echo "> $ans" >> "${gsdlhome}/INSTALL_RECORD"
1921	if [ "$ans" = "" ] \|\| [ "$ans" = "1" ]; then
1922	found="yes"
1923	public_html="$gsdlhome"
1924	# no link
1925	echo "$itext46"
1926	echo "$itext46" >> "${gsdlhome}/INSTALL_RECORD"
1927	remind_ph="yes"
1928	elif [ "$ans" = "2" ]; then
1929	found="yes"
1930	# external public_html
1931	echo
1932	public_html="/home/${logname}/public_html"
1933	if [ "$logname" = "root" ]; then
1934	public_html="/usr/local/apache/htdocs"
1935	fi
1936
1937	# ------------------------------------------------------------------------------
1938	# MORE FRENCH STRINGS
1939	# ------------------------------------------------------------------------------
1940	if [ "$gsdllangcode" == "fr" ]; then
1941
1942	itext47="Entrez le répertoire qui est accessible à partir du Web [${public_html}]"
1943
1944	# ------------------------------------------------------------------------------
1945	# MORE RUSSIAN STRINGS
1946	# ------------------------------------------------------------------------------
1947	elif [ "$gsdllangcode" == "ru" ]; then
1948
1949	itext47="÷×ÅÄÉÔÅ ÄÉÒÅËÔÏÒÉÀ, ËÏÔÏÒÁÑ Ñ×ÌÑÅÔÓÑ ÔÁËÖÅ ÄÏÓÔÕÐÎÏÊ ÉÚ ÓÅÔÉ [${public_html}]"
1950
1951	# ------------------------------------------------------------------------------
1952	# MORE SPANISH STRINGS
1953	# ------------------------------------------------------------------------------
1954	elif [ "$gsdllangcode" == "es" ]; then
1955
1956	itext47="Ingrese un directorio que también sea accesible desde la Web [${public_html}]"
1957
1958	# ------------------------------------------------------------------------------
1959	# MORE ENGLISH STRINGS
1960	# ------------------------------------------------------------------------------
1961	else
1962
1963	itext47="Enter directory that is also accessible from the web [${public_html}]"
1964
1965	fi
1966
1967	echo "$itext47"
1968	echo "$itext47" >> "${gsdlhome}/INSTALL_RECORD"
1969	printf "%s" "> "
1970	read ans
1971	echo "> $ans" >> "${gsdlhome}/INSTALL_RECORD"
1972	if [ "$ans" != "" ]; then
1973	public_html="$ans"
1974	fi
1975
1976	# ------------------------------------------------------------------------------
1977	# MORE FRENCH STRINGS
1978	# ------------------------------------------------------------------------------
1979	if [ "$gsdllangcode" == "fr" ]; then
1980
1981	itext48="
1982	Impossible d'écrire dans le répertoire $public_html. Vous devrez créer un
1983	lien symbolique appelé gsdl de $public_html vers $gsdlhome après cette
1984	installation. On vous le rappellera encore une fois à la fin de la
1985	procédure d'installation."
1986
1987	# ------------------------------------------------------------------------------
1988	# MORE RUSSIAN STRINGS
1989	# ------------------------------------------------------------------------------
1990	elif [ "$gsdllangcode" == "ru" ]; then
1991
1992	itext48="
1993	îÅ×ÏÚÍÏÖÎÏ ÐÉÓÁÔØ × ÄÉÒÅËÔÏÒÉÀ $public_html. ÷ÁÍ ÂÕÄÅÔ ÎÅÏÂÈÏÄÉÍÏ
1994	ÓÏÚÄÁÔØ Ó×ÑÚØ, ÎÁÚÙ×ÁÅÍÕÀ gsdl, ÏÔ $public_html Ë $gsdlhome ÐÏÓÌÅ
1995	ÔÏÇÏ, ËÁË ÜÔÁ ÉÎÓÔÁÌÌÑÃÉÑ ÚÁËÏÎÞÅÎÁ. ÷ÁÍ ÂÕÄÅÔ ÎÁÐÏÍÎÅÎÏ ÏÂ ÜÔÏÍ
1996	ÓÎÏ×Á × ËÏÎÃÅ ÐÒÏÃÅÄÕÒÙ ÉÎÓÔÁÌÌÑÃÉÉ."
1997
1998	# ------------------------------------------------------------------------------
1999	# MORE SPANISH STRINGS
2000	# ------------------------------------------------------------------------------
2001	elif [ "$gsdllangcode" == "es" ]; then
2002
2003	itext48="
2004	No se puede escribir en el directorio $public_html. Usted necesita
2005	crear un vínculo llamado gsdl de $public_html a $gsdlhome después de
2006	terminar la instalación. Se le recordará esto nuevamente al final del
2007	proceso de instalación."
2008
2009	# ------------------------------------------------------------------------------
2010	# MORE ENGLISH STRINGS
2011	# ------------------------------------------------------------------------------
2012	else
2013
2014	itext48="
2015	Unable to write to $public_html directory. You will need
2016	to create a link called gsdl from $public_html to
2017	$gsdlhome after this installation is completed. You'll be
2018	reminded of this again at the end of the installation
2019	procedure."
2020
2021	fi
2022
2023	# create link to gsdl (and update Uninstall.sh)
2024	if [ -w "$public_html" ]; then
2025	cd "$gsdlhome"
2026	echo "#!/bin/sh" > Uninstall.sh
2027	echo "" >> Uninstall.sh
2028	echo "$cmd_rm \"$public_html/gsdl\"" >> Uninstall.sh
2029	echo "$cmd_rm \"${cgi_bin}/gsdlsite.cfg\"" >> Uninstall.sh
2030	echo "$cmd_rm \"${cgi_bin}/library\"" >> Uninstall.sh
2031	echo "echo \"remove ${gsdlhome} directory? [y]\"" >> Uninstall.sh
2032	echo "read ans" >> Uninstall.sh
2033	echo "if [ \"\$ans\" = \"\" ] \|\| [ \"\$ans\" = \"y\" ]; then" >> Uninstall.sh
2034	echo " $cmd_rmr \"$gsdlhome\"" >> Uninstall.sh
2035	echo "fi" >> Uninstall.sh
2036	$cmd_chmod u+x Uninstall.sh
2037	cd "$thisdir"
2038
2039	msg="--> Install.sh: [cd \"$public_html\"]"
2040	echo "$msg"
2041	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
2042	cd "$public_html"
2043	msg="--> Install.sh: [$cmd_ln \"$gsdlhome\" gsdl]"
2044	echo "$msg"
2045	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
2046	$cmd_ln "$gsdlhome" gsdl
2047	msg="--> Install.sh: [cd \"$thisdir\"]"
2048	echo "$msg"
2049	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
2050	cd "$thisdir"
2051	else
2052	echo "$itext48"
2053	echo "$itext48" >> "${gsdlhome}/INSTALL_RECORD"
2054	old_ph=$public_html
2055	remind_ph_nolink="yes"
2056	fi
2057	public_html="${public_html}/gsdl"
2058	fi
2059	done
2060
2061	# ------------------------------------------------------------------------------
2062	# MORE FRENCH STRINGS
2063	# ------------------------------------------------------------------------------
2064	if [ "$gsdllangcode" == "fr" ]; then
2065
2066	itext49="
2067	Entrez l'adresse Web du répertoire $public_html. Elle peut être un url
2068	relatif (c.a.d. \"/gsdl\") ou un url complet (c.a.d.
2069	\"http://${gsdlhost}/gsdl\") [/gsdl]"
2070
2071	itext50="
2072	Un mot de passe est nécessaire pour pouvoir utiliser des collections
2073	construites par des utilisateurs finaux ou pour afficher des pages
2074	permettant l'administration.
2075	Un utilisateur ayant pour nom utilisateur \"admin\" sera créé avec le
2076	mot de passe que vous allez entrer (c.a.d. que pour afficher les pages
2077	qui nécessite d'authentifier l'utilisateur, vous devrez entrer \"admin\"
2078	comme nom d'utilisateur et le mot de passe que vous allez donner ici).
2079	"
2080
2081	itext51="
2082
2083	L'installation de Greenstone a réussi."
2084
2085	itext52=" * N'oubliez pas de configurer le serveur Web pour considérer le
2086	répertoire $cgi_bin comme étant le répertoire des exécutables cgi."
2087
2088	itext53=" Pour le serveur Apache, vous devrez ajouter la directive
2089	ScriptAlias suivante dans le fichier de configuration httpd.conf"
2090
2091	itext54=" * N'oubliez pas de déplacer le contenu du répertoire
2092	${gsdlhome}/cgi-bin dans le répertoire $cgi_bin
2093	"
2094
2095	itext55=" * N'oubliez pas de configurer le serveur Web pour considérer le
2096	répertoire $gsdlhome comme accessible par le Web."
2097
2098	itext56=" Pour le serveur Apache, vous devrez ajouter au fichier de
2099	configuration httpd.conf la directive Alias suivante."
2100
2101	itext57=" N'oubliez pas de créer un lien symbolique appelé gsdl de $old_ph
2102	vers ${gsdlhome}.
2103	"
2104
2105	itext58="Les messages affichés lors de l'exécution de ce script ont été enregistré
2106	dans ${gsdlhome}/INSTALL_RECORD.
2107	Vous pouvez enlever Greenstone de votre ordinateur à tout moment en
2108	exécutant le script ${gsdlhome}/Uninstall.sh.
2109	Utilisez Greenstone en rentrant l'adresse ${web_cgi}/library
2110	dans votre navigateur.
2111	"
2112
2113	# ------------------------------------------------------------------------------
2114	# MORE RUSSIAN STRINGS
2115	# ------------------------------------------------------------------------------
2116	elif [ "$gsdllangcode" == "ru" ]; then
2117
2118	itext49="
2119	÷×ÅÄÉÔÅ ×ÅÂ-ÁÄÒÅÓ ÄÉÒÅËÔÏÒÉÉ $public_html. üÔÏ ÍÏÖÅÔ ÂÙÔØ
2120	ÏÔÎÏÓÉÔÅÌØÎÙÊ URL (ÎÁÐÒÉÍÅÒ, \"/gsdl\") ÉÌÉ ÖÅ ÐÏÌÎÙÊ URL
2121	(ÎÁÐÒÉÍÅÒ, \"http://${gsdlhost}/gsdl\") [/gsdl]"
2122
2123	itext50="
2124	þÔÏÂÙ ÉÓÐÏÌØÚÏ×ÁÔØ ÐÏÓÔÒÏÅÎÉÅ ËÏÌÌÅËÃÉÉ ËÏÎÅÞÎÏÇÏ ÐÏÌØÚÏ×ÁÔÅÌÑ ÉÌÉ
2125	ÉÍÅÔØ Õ×ÅÒÅÎÎÙÊ ÄÏÓÔÕÐ Ë ÞÁÓÔÉ ÁÄÍÉÎÉÓÔÒÁÔÉ×ÎÙÈ ÓÔÒÁÎÉÃ, ÷ÁÍ
2126	ÎÅÏÂÈÏÄÉÍÏ ÉÍÅÔØ ÐÁÒÏÌØ. ðÏÌØÚÏ×ÁÔÅÌØ Ó ÉÍÅÎÅÍ \"admin\" ÂÕÄÅÔ
2127	ÓÏÚÄÁÎ ÄÌÑ ÷ÁÓ Ó ÐÁÒÏÌÅÍ, ËÏÔÏÒÙÊ ÷Ù ÎÁÚÎÁÞÉÔÅ (ÔÏ ÅÓÔØ ÄÌÑ ×ÈÏÄÁ
2128	× ÌÀÂÙÅ ÓÔÒÁÎÉÃÙ, ÔÒÅÂÕÀÝÉÅ ÁÕÔÅÎÔÉÆÉËÁÃÉÉ ÐÏÌØÚÏ×ÁÔÅÌÑ, ××ÅÄÉÔÅ
2129	ÉÍÑ ÐÏÌØÚÏ×ÁÔÅÌÑ \"admin\" É ÐÁÒÏÌØ, ËÏÔÏÒÙÊ ÷Ù ÎÁÚÎÁÞÉÌÉ).
2130	"
2131
2132	itext51="
2133
2134	õÓÔÁÎÏ×ËÁ Greenstone ÚÁËÏÎÞÅÎÁ ÕÓÐÅÛÎÏ."
2135
2136	itext52=" * îÅ ÚÁÂÕÄØÔÅ ÓËÏÎÆÉÇÕÒÉÒÏ×ÁÔØ ÷ÁÛ ÷ÅÂ-ÓÅÒ×ÅÒ ÔÁË,
2137	ÞÔÏÂÙ $cgi_bin Ñ×ÌÑÌÁÓØ cgi-×ÙÐÏÌÎÉÍÏÊ ÄÉÒÅËÔÏÒÉÅÊ."
2138
2139	itext53=" äÌÑ ÷ÅÂ-ÓÅÒ×ÅÒÁ Apache ÜÔÏ ÏÚÎÁÞÁÅÔ ÄÏÂÁ×ÌÅÎÉÅ
2140	ÓÌÅÄÕÀÝÅÊ ÄÉÒÅËÔÉ×Ù ScriptAlias Ë ÷ÁÛÅÍÕ ËÏÎÆÉÇÕÒÁÃÉÏÎÎÏÍÕ
2141	ÆÁÊÌÕ httpd.conf."
2142
2143	itext54=" * îÅ ÚÁÂÕÄØÔÅ ÐÅÒÅÍÅÓÔÉÔØ ÓÏÄÅÒÖÁÎÉÅ
2144	${gsdlhome}/cgi-bin × $cgi_bin.
2145	"
2146
2147	itext55=" * îÅ ÚÁÂÕÄØÔÅ ÔÁË ÓËÏÎÆÉÇÕÒÉÒÏ×ÁÔØ ÷ÁÛ ÷ÅÂ-ÓÅÒ×ÅÒ
2148	ÔÁË, ÞÔÏÂÙ ÄÉÒÅËÔÏÒÉÑ $gsdlhome ÂÙÌÁ ÄÏÓÔÕÐÎÁ ÉÚ ÓÅÔÉ."
2149
2150	itext56=" äÌÑ ÷ÅÂ-ÓÅÒ×ÅÒÁ Apache ÜÔÏ ÏÚÎÁÞÁÅÔ ÄÏÂÁ×ÌÅÎÉÅ
2151	ÄÉÒÅËÔÉ×Ù Alias Ë ×ÁÛÅÍÕ ËÏÎÆÉÇÕÒÁÃÉÏÎÎÏÍÕ ÆÁÊÌÕ httpd.conf."
2152
2153	itext57=" * îÅ ÚÁÂÕÄØÔÅ ÓÏÚÄÁÔØ ÓÓÙÌËÕ, ÎÁÚÙ×ÁÅÍÕÀ gsdl, ÏÔ
2154	$old_ph Ë ${gsdlhome}.
2155	"
2156
2157	itext58="÷ÙÈÏÄ ÜÔÏÇÏ ÓËÒÉÐÔÁ ÂÙÌ ÚÁÐÉÓÁÎ ÄÌÑ ÷ÁÓ ×
2158	${gsdlhome}/INSTALL_RECORD.
2159	÷Ù ÍÏÖÅÔÅ ÕÄÁÌÉÔØ Greenstone ÉÚ ÷ÁÛÅÊ ÓÉÓÔÅÍÙ × ÌÀÂÏÅ ×ÒÅÍÑ,
2160	××ÅÄÑ ÓËÒÉÐÔ ${gsdlhome}/Uninstall.sh.
2161	äÏÓÔÕÐ Ë Greenstone ÕËÁÚÁÎÉÅÍ ÷ÅÂ-ÂÒÁÕÚÅÒÁ × ${web_cgi}/library.
2162	"
2163
2164	# ------------------------------------------------------------------------------
2165	# MORE SPANISH STRINGS
2166	# ------------------------------------------------------------------------------
2167	elif [ "$gsdllangcode" == "es" ]; then
2168
2169	itext49="
2170	Ingrese la dirección Web del directorio $public_html. Ésta puede ser
2171	un url relativo (p. ej. \"/gsdl\") o un url completo (p. ej.
2172	\"http://${gsdlhost}/gsdl\") [/gsdl]"
2173
2174	itext50="
2175	Con el fin de usar la función que le permite al usuario final crear una
2176	colección o para tener acceso a ciertas partes de las páginas de
2177	administración usted deberá contar con una contraseña. Se creará para
2178	usted un usuario con el nombre \"admin\" y la contraseña que usted
2179	elija (es decir, para ingresar a las páginas que requieran de
2180	autenticación de usuario ingrese el nombre del usuario \"admin\" y la
2181	contraseña que usted haya elegido).
2182	"
2183
2184	itext51="
2185
2186	La instalación de Greenstone se realizó con éxito."
2187
2188	itext52=" * No olvide configurar su servidor Web para que trate a $cgi_bin
2189	como un directorio ejecutable cgi."
2190
2191	itext53=" En el caso del servidor Apache esto significa añadir la siguiente
2192	directiva ScriptAlias a su archivo de configuración httpd.conf."
2193
2194	itext54=" * No olvide mover los contenidos de ${gsdlhome}/cgi-bin a $cgi_bin.
2195	"
2196
2197	itext55=" * No olvide configurar su servidor Web para que trate a $gsdlhome
2198	como un directorio accesible desde la Web."
2199
2200	itext56=" En el caso del servidor Apache esto significa añadir la siguiente
2201	directiva Alias a su archivo de configuración httpd.conf."
2202
2203	itext57=" * No olvide crear un vínculo llamado gsdl de $old_ph a ${gsdlhome}.
2204	"
2205
2206	itext58="Los resultados de este guión han sido registrados para su uso
2207	posterior en ${gsdlhome}/INSTALL_RECORD.
2208	Usted podrá quitar el programa Greenstone de su sistema en cualquier
2209	momento que lo desee con solo ejecutar el guión
2210	${gsdlhome}/Uninstall.sh.
2211	Para tener acceso a Greenstone apunte el navegador hacia
2212	${web_cgi}/library.
2213	"
2214
2215	# ------------------------------------------------------------------------------
2216	# MORE ENGLISH STRINGS
2217	# ------------------------------------------------------------------------------
2218	else
2219
2220	itext49="
2221	Enter the web address of the $public_html directory.
2222	This may be a relative url (e.g. \"/gsdl\") or a
2223	complete url (e.g. \"http://${gsdlhost}/gsdl\") [/gsdl]"
2224
2225	itext50="
2226	In order to use end-user collection building or to access certain
2227	parts of the administration pages you must have a password.
2228	A user with the username \"admin\" will be created for you with
2229	the password you provide (i.e. to enter any pages requiring user
2230	authentication enter the \"admin\" username and the password you
2231	set here).
2232	"
2233
2234	itext51="
2235
2236	Greenstone installation completed successfully."
2237
2238	itext52=" * Don't forget to configure your webserver to treat
2239	$cgi_bin as a cgi executable directory."
2240
2241	itext53=" For the Apache webserver this means adding the following
2242	ScriptAlias directive to your httpd.conf configuration file."
2243
2244	itext54=" * Don't forget to move the contents of ${gsdlhome}/cgi-bin
2245	to $cgi_bin
2246	"
2247
2248	itext55=" * Don't forget to configure your webserver to treat
2249	$gsdlhome as a web accessible directory."
2250
2251	itext56=" For the Apache webserver this means adding the following
2252	Alias directive to your httpd.conf configuration file."
2253
2254	itext57=" * Don't forget to create a link called gsdl from $old_ph
2255	to ${gsdlhome}.
2256	"
2257
2258	itext58="The output of this script has been recorded for you at
2259	${gsdlhome}/INSTALL_RECORD.
2260	You may remove Greenstone from your system at any time by running
2261	the ${gsdlhome}/Uninstall.sh script.
2262	Access Greenstone by pointing a web browser at
2263	${web_cgi}/library
2264	"
2265
2266	fi
2267
2268	# get httpprefix
2269	echo "$itext49"
2270	echo "$itext49" >> "${gsdlhome}/INSTALL_RECORD"
2271	printf "%s" ">"
2272	httpprefix="/gsdl"
2273	read ans
2274	echo "> $ans" >> "${gsdlhome}/INSTALL_RECORD"
2275	if [ "$ans" != "" ]; then
2276	httpprefix="$ans"
2277	fi
2278
2279	# get initial password
2280	echo "$itext50"
2281	echo "$itext50" >> "${gsdlhome}/INSTALL_RECORD"
2282	pw=`"${gsdlhome}/bin/${gsdlos}/getpw"`
2283	tmp="[admin]
2284	<comment>
2285	<enabled>true
2286	<groups>administrator,colbuilder
2287	<password>${pw}
2288	<username>admin
2289	----------------------------------------------------------------------"
2290	echo "$tmp" \| ${gsdlhome}/bin/${gsdlos}/txt2db "${gsdlhome}/etc/users.db"
2291	$cmd_chmod a+rw "${gsdlhome}/etc/users.db"
2292
2293	# add the dummy "demo" user with "demo" password for the authen-e collection (CD-ROM only)
2294	if [ $iscdrom = "yes" ]; then
2295	demouser="[demo]
2296	<comment>Dummy \"demo\" user with \"demo\" password for authen-e collection
2297	<enabled>true
2298	<groups>demo
2299	<password>Tpp90HTz/jz9w
2300	<username>demo
2301	----------------------------------------------------------------------"
2302	echo "$demouser" \| ${gsdlhome}/bin/${gsdlos}/txt2db -append "${gsdlhome}/etc/users.db"
2303	$cmd_chmod a+rw "${gsdlhome}/etc/users.db"
2304	fi
2305
2306	# set the default setup script language to be the installation language
2307	cd "$gsdlhome"
2308	sed "s\|gsdllang=\"\"\|gsdllang=\"${gsdllangcode}\"\|" setup.bash > tmp123.txt && $cmd_mv tmp123.txt setup.bash
2309	sed "s\|setenv GSDLLANG .*\|setenv GSDLLANG ${gsdllangcode}\|" setup.csh > tmp123.txt && $cmd_mv tmp123.txt setup.csh
2310	$cmd_chmod a+x setup.*
2311
2312	# set the default interface language to be the installation language
2313	echo >> etc/main.cfg
2314	echo "cgiarg shortname=l argdefault=$gsdllangcode" >> etc/main.cfg
2315
2316	# create a symbolic link "strings.rb" to the appropriate resource bundle
2317	cd "$gsdlhome/perllib"
2318	$cmd_rm -f strings.rb
2319	$cmd_ln "strings_$gsdllangcode.rb" strings.rb
2320
2321	# set the GLI script language to be the installation language
2322	cd "$gsdlhome/gli"
2323	sed "s\|glilang=.*\|glilang=$gsdllangcode\|" clean.sh > tmp123.txt && $cmd_mv tmp123.txt clean.sh
2324	sed "s\|glilang=.*\|glilang=$gsdllangcode\|" document.sh > tmp123.txt && $cmd_mv tmp123.txt document.sh
2325	sed "s\|glilang=.*\|glilang=$gsdllangcode\|" gli.sh > tmp123.txt && $cmd_mv tmp123.txt gli.sh
2326	sed "s\|glilang=.*\|glilang=$gsdllangcode\|" makegli.sh > tmp123.txt && $cmd_mv tmp123.txt makegli.sh
2327	$cmd_chmod a+x *.sh
2328	$cmd_rm -f *.bat
2329
2330	# set the default GLI interface language to be the installation language
2331	sed "s\|Argument name=\"general.locale\">.*<\|Argument name=\"general.locale\">$gsdllangcode<\|" classes/xml/config.xml > tmp123.txt && $cmd_mv tmp123.txt classes/xml/config.xml
2332
2333	# edit gsdlsite.cfg
2334	cd "$cgi_bin"
2335	sed "s\|\(gsdlhome \)[^ ]\|\1\"${gsdlhome}\"\|" gsdlsite.cfg > tmp123.txt && $cmd_mv tmp123.txt gsdlsite.cfg
2336	sed "s\|#\(httpprefix \)[^ ]*\|\1${httpprefix}\|" gsdlsite.cfg > tmp123.txt && $cmd_mv tmp123.txt gsdlsite.cfg
2337	sed "s\|\(httpimg \)[^ ]\|\1${httpprefix}/images\|" gsdlsite.cfg > tmp123.txt && $cmd_mv tmp123.txt gsdlsite.cfg
2338
2339	# success
2340	echo "$itext51"
2341	echo "$itext51" >> "${gsdlhome}/INSTALL_RECORD"
2342	if [ "$remind_cgi" = "yes" ]; then
2343	echo "$itext52"
2344	echo "$itext52" >> "${gsdlhome}/INSTALL_RECORD"
2345
2346	apache_web_cgi=`echo "$web_cgi" \| sed "s\|[^/]//[^/]\|\|" \| sed "s\|/*$\|/\|"`
2347	cgi_bin_slash=`echo "$cgi_bin" \| sed "s\|/*$\|/\|"`
2348	cgi_bin_noslash=`echo "$cgi_bin" \| sed "s\|/*$\|\|"`
2349
2350	msg="$itext53
2351
2352	ScriptAlias ${apache_web_cgi} \"${cgi_bin_slash}\"
2353	<Directory \"${cgi_bin_noslash}\">
2354	AllowOverride None
2355	Options None
2356	Order allow,deny
2357	Allow from all
2358	</Directory>
2359	"
2360	echo "$msg"
2361	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
2362	fi
2363	if [ "$remind_cgi_nomove" = "yes" ]; then
2364	echo "$itext54"
2365	echo "$itext54" >> "${gsdlhome}/INSTALL_RECORD"
2366	fi
2367	if [ "$remind_ph" = "yes" ]; then
2368	echo "$itext55"
2369	echo "$itext55" >> "${gsdlhome}/INSTALL_RECORD"
2370
2371	apache_httpprefix=`echo "$httpprefix" \| sed "s\|[^/]//[^/]\|\|" \| sed "s\|/*$\|/\|"`
2372	public_html_slash=`echo "$public_html" \| sed "s\|/*$\|/\|"`
2373	public_html_noslash=`echo "$public_html" \| sed "s\|/*$\|\|"`
2374
2375	msg="$itext56
2376
2377	Alias ${apache_httpprefix} \"${public_html_slash}\"
2378	<Directory \"${public_html_noslash}\">
2379	Options Indexes MultiViews FollowSymLinks
2380	AllowOverride None
2381	Order allow,deny
2382	Allow from all
2383	</Directory>
2384	"
2385	echo "$msg"
2386	echo "$msg" >> "${gsdlhome}/INSTALL_RECORD"
2387	fi
2388	if [ "$remind_ph_nolink" = "yes" ]; then
2389	echo "$itext57"
2390	echo "$itext57" >> "${gsdlhome}/INSTALL_RECORD"
2391	fi
2392	echo "$itext58"
2393	echo "$itext58" >> "${gsdlhome}/INSTALL_RECORD"
2394
2395	# write VERSION file for automatic updating in the future
2396	echo "Version: 2.62" > "${gsdlhome}/VERSION"
2397	if [ "$iscdrom" = "yes" ]; then
2398	echo "Media: CD" >> "${gsdlhome}/VERSION"
2399	else
2400	echo "Media: Web" >> "${gsdlhome}/VERSION"
2401	fi
2402	echo "OS: $gsdlos" >> "${gsdlhome}/VERSION"
2403	echo "Language: $gsdllangcode" >> "${gsdlhome}/VERSION"
2404	if [ "$docs" = "yes" ]; then
2405	echo "Option: Documentation" >> "${gsdlhome}/VERSION"
2406	fi
2407	if [ "$export" = "yes" ]; then
2408	echo "Option: Export to CD" >> "${gsdlhome}/VERSION"
2409	fi
2410	if [ "$compile" = "yes" ]; then
2411	echo "Option: Web Library" >> "${gsdlhome}/VERSION"
2412	else
2413	echo "Option: Source" >> "${gsdlhome}/VERSION"
2414	fi
2415
2416	exit 0

Note: See TracBrowser for help on using the repository browser.

Download in other formats: