Index: /gs3-extensions/solr/trunk/src/collect/solr-jdbm-demo/etc/conf/protwords.txt
===================================================================
--- /gs3-extensions/solr/trunk/src/collect/solr-jdbm-demo/etc/conf/protwords.txt	(revision 27850)
+++ /gs3-extensions/solr/trunk/src/collect/solr-jdbm-demo/etc/conf/protwords.txt	(revision 27850)
@@ -0,0 +1,21 @@
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License.  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#-----------------------------------------------------------------------
+# Use a protected word file to protect against the stemmer reducing two
+# unrelated words to the same base word.
+
+# Some non-words that normally won't be encountered,
+# just to test that they won't be stemmed.
+dontstems
+zwhacky
+
Index: /gs3-extensions/solr/trunk/src/collect/solr-jdbm-demo/etc/conf/schema.xml
===================================================================
--- /gs3-extensions/solr/trunk/src/collect/solr-jdbm-demo/etc/conf/schema.xml	(revision 27850)
+++ /gs3-extensions/solr/trunk/src/collect/solr-jdbm-demo/etc/conf/schema.xml	(revision 27850)
@@ -0,0 +1,662 @@
+<?xml version="1.0" encoding="UTF-8" ?>
+<!--
+ Licensed to the Apache Software Foundation (ASF) under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The ASF licenses this file to You under the Apache License, Version 2.0
+ (the "License"); you may not use this file except in compliance with
+ the License.  You may obtain a copy of the License at
+
+     http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+
+<!--  
+ This is the Solr schema file. This file should be named "schema.xml" and
+ should be in the conf directory under the solr home
+ (i.e. ./solr/conf/schema.xml by default) 
+ or located where the classloader for the Solr webapp can find it.
+
+ This example schema is the recommended starting point for users.
+ It should be kept correct and concise, usable out-of-the-box.
+
+ For more information, on how to customize this file, please see
+ http://wiki.apache.org/solr/SchemaXml
+
+ PERFORMANCE NOTE: this schema includes many optional features and should not
+ be used for benchmarking.  To improve performance one could
+  - set stored="false" for all fields possible (esp large fields) when you
+    only need to search on the field but don't need to return the original
+    value.
+  - set indexed="false" if you don't need to search on the field, but only
+    return the field as a result of searching on other indexed fields.
+  - remove all unneeded copyField statements
+  - for best index size and searching performance, set "index" to false
+    for all general text fields, use copyField to copy them to the
+    catchall "text" field, and use that for searching.
+  - For maximum indexing performance, use the StreamingUpdateSolrServer
+    java client.
+  - Remember to run the JVM in server mode, and use a higher logging level
+    that avoids logging every request
+-->
+
+<schema name="example" version="1.4">
+  <!-- attribute "name" is the name of this schema and is only used for display purposes.
+       Applications should change this to reflect the nature of the search collection.
+       version="1.4" is Solr's version number for the schema syntax and semantics.  It should
+       not normally be changed by applications.
+       1.0: multiValued attribute did not exist, all fields are multiValued by nature
+       1.1: multiValued attribute introduced, false by default 
+       1.2: omitTermFreqAndPositions attribute introduced, true by default except for text fields.
+       1.3: removed optional field compress feature
+       1.4: default auto-phrase (QueryParser feature) to off
+     -->
+
+  <types>
+    <!-- field type definitions. The "name" attribute is
+       just a label to be used by field definitions.  The "class"
+       attribute and any other attributes determine the real
+       behavior of the fieldType.
+         Class names starting with "solr" refer to java classes in the
+       org.apache.solr.analysis package.
+    -->
+
+    <!-- The StrField type is not analyzed, but indexed/stored verbatim. -->
+    <fieldType name="string" class="solr.StrField" sortMissingLast="true" omitNorms="true"/>
+
+    <!-- boolean type: "true" or "false" -->
+    <fieldType name="boolean" class="solr.BoolField" sortMissingLast="true" omitNorms="true"/>
+    <!--Binary data type. The data should be sent/retrieved in as Base64 encoded Strings -->
+    <fieldtype name="binary" class="solr.BinaryField"/>
+
+    <!-- The optional sortMissingLast and sortMissingFirst attributes are
+         currently supported on types that are sorted internally as strings.
+	       This includes "string","boolean","sint","slong","sfloat","sdouble","pdate"
+       - If sortMissingLast="true", then a sort on this field will cause documents
+         without the field to come after documents with the field,
+         regardless of the requested sort order (asc or desc).
+       - If sortMissingFirst="true", then a sort on this field will cause documents
+         without the field to come before documents with the field,
+         regardless of the requested sort order.
+       - If sortMissingLast="false" and sortMissingFirst="false" (the default),
+         then default lucene sorting will be used which places docs without the
+         field first in an ascending sort and last in a descending sort.
+    -->    
+
+    <!--
+      Default numeric field types. For faster range queries, consider the tint/tfloat/tlong/tdouble types.
+    -->
+    <fieldType name="int" class="solr.TrieIntField" precisionStep="0" omitNorms="true" positionIncrementGap="0"/>
+    <fieldType name="float" class="solr.TrieFloatField" precisionStep="0" omitNorms="true" positionIncrementGap="0"/>
+    <fieldType name="long" class="solr.TrieLongField" precisionStep="0" omitNorms="true" positionIncrementGap="0"/>
+    <fieldType name="double" class="solr.TrieDoubleField" precisionStep="0" omitNorms="true" positionIncrementGap="0"/>
+
+    <!--
+     Numeric field types that index each value at various levels of precision
+     to accelerate range queries when the number of values between the range
+     endpoints is large. See the javadoc for NumericRangeQuery for internal
+     implementation details.
+
+     Smaller precisionStep values (specified in bits) will lead to more tokens
+     indexed per value, slightly larger index size, and faster range queries.
+     A precisionStep of 0 disables indexing at different precision levels.
+    -->
+    <fieldType name="tint" class="solr.TrieIntField" precisionStep="8" omitNorms="true" positionIncrementGap="0"/>
+    <fieldType name="tfloat" class="solr.TrieFloatField" precisionStep="8" omitNorms="true" positionIncrementGap="0"/>
+    <fieldType name="tlong" class="solr.TrieLongField" precisionStep="8" omitNorms="true" positionIncrementGap="0"/>
+    <fieldType name="tdouble" class="solr.TrieDoubleField" precisionStep="8" omitNorms="true" positionIncrementGap="0"/>
+
+    <!-- The format for this date field is of the form 1995-12-31T23:59:59Z, and
+         is a more restricted form of the canonical representation of dateTime
+         http://www.w3.org/TR/xmlschema-2/#dateTime    
+         The trailing "Z" designates UTC time and is mandatory.
+         Optional fractional seconds are allowed: 1995-12-31T23:59:59.999Z
+         All other components are mandatory.
+
+         Expressions can also be used to denote calculations that should be
+         performed relative to "NOW" to determine the value, ie...
+
+               NOW/HOUR
+                  ... Round to the start of the current hour
+               NOW-1DAY
+                  ... Exactly 1 day prior to now
+               NOW/DAY+6MONTHS+3DAYS
+                  ... 6 months and 3 days in the future from the start of
+                      the current day
+                      
+         Consult the DateField javadocs for more information.
+
+         Note: For faster range queries, consider the tdate type
+      -->
+    <fieldType name="date" class="solr.TrieDateField" omitNorms="true" precisionStep="0" positionIncrementGap="0"/>
+
+    <!-- A Trie based date field for faster date range queries and date faceting. -->
+    <fieldType name="tdate" class="solr.TrieDateField" omitNorms="true" precisionStep="6" positionIncrementGap="0"/>
+
+
+    <!--
+      Note:
+      These should only be used for compatibility with existing indexes (created with older Solr versions)
+      or if "sortMissingFirst" or "sortMissingLast" functionality is needed. Use Trie based fields instead.
+
+      Plain numeric field types that store and index the text
+      value verbatim (and hence don't support range queries, since the
+      lexicographic ordering isn't equal to the numeric ordering)
+    -->
+    <fieldType name="pint" class="solr.IntField" omitNorms="true"/>
+    <fieldType name="plong" class="solr.LongField" omitNorms="true"/>
+    <fieldType name="pfloat" class="solr.FloatField" omitNorms="true"/>
+    <fieldType name="pdouble" class="solr.DoubleField" omitNorms="true"/>
+    <fieldType name="pdate" class="solr.DateField" sortMissingLast="true" omitNorms="true"/>
+
+
+    <!--
+      Note:
+      These should only be used for compatibility with existing indexes (created with older Solr versions)
+      or if "sortMissingFirst" or "sortMissingLast" functionality is needed. Use Trie based fields instead.
+
+      Numeric field types that manipulate the value into
+      a string value that isn't human-readable in its internal form,
+      but with a lexicographic ordering the same as the numeric ordering,
+      so that range queries work correctly.
+    -->
+    <fieldType name="sint" class="solr.SortableIntField" sortMissingLast="true" omitNorms="true"/>
+    <fieldType name="slong" class="solr.SortableLongField" sortMissingLast="true" omitNorms="true"/>
+    <fieldType name="sfloat" class="solr.SortableFloatField" sortMissingLast="true" omitNorms="true"/>
+    <fieldType name="sdouble" class="solr.SortableDoubleField" sortMissingLast="true" omitNorms="true"/>
+
+
+    <!-- The "RandomSortField" is not used to store or search any
+         data.  You can declare fields of this type it in your schema
+         to generate pseudo-random orderings of your docs for sorting 
+         purposes.  The ordering is generated based on the field name 
+         and the version of the index, As long as the index version
+         remains unchanged, and the same field name is reused,
+         the ordering of the docs will be consistent.  
+         If you want different psuedo-random orderings of documents,
+         for the same version of the index, use a dynamicField and
+         change the name
+     -->
+    <fieldType name="random" class="solr.RandomSortField" indexed="true" />
+
+    <!-- solr.TextField allows the specification of custom text analyzers
+         specified as a tokenizer and a list of token filters. Different
+         analyzers may be specified for indexing and querying.
+
+         The optional positionIncrementGap puts space between multiple fields of
+         this type on the same document, with the purpose of preventing false phrase
+         matching across fields.
+
+         For more info on customizing your analyzer chain, please see
+         http://wiki.apache.org/solr/AnalyzersTokenizersTokenFilters
+     -->
+
+    <!-- One can also specify an existing Analyzer class that has a
+         default constructor via the class attribute on the analyzer element
+    <fieldType name="text_greek" class="solr.TextField">
+      <analyzer class="org.apache.lucene.analysis.el.GreekAnalyzer"/>
+    </fieldType>
+    -->
+
+    <!-- A text field that only splits on whitespace for exact matching of words -->
+    <fieldType name="text_ws" class="solr.TextField" positionIncrementGap="100">
+      <analyzer>
+        <tokenizer class="solr.WhitespaceTokenizerFactory"/>
+      </analyzer>
+    </fieldType>
+
+    <!-- A general text field that has reasonable, generic
+         cross-language defaults: it tokenizes with StandardTokenizer,
+	 removes stop words from case-insensitive "stopwords.txt"
+	 (empty by default), and down cases.  At query time only, it
+	 also applies synonyms. -->
+    <fieldType name="text_general" class="solr.TextField" positionIncrementGap="100">
+      <analyzer type="index">
+        <tokenizer class="solr.StandardTokenizerFactory"/>
+        <filter class="solr.StopFilterFactory" ignoreCase="true" words="stopwords.txt" enablePositionIncrements="true" />
+        <!-- in this example, we will only use synonyms at query time
+        <filter class="solr.SynonymFilterFactory" synonyms="index_synonyms.txt" ignoreCase="true" expand="false"/>
+        -->
+        <filter class="solr.LowerCaseFilterFactory"/>
+      </analyzer>
+      <analyzer type="query">
+        <tokenizer class="solr.StandardTokenizerFactory"/>
+        <filter class="solr.StopFilterFactory" ignoreCase="true" words="stopwords.txt" enablePositionIncrements="true" />
+        <filter class="solr.SynonymFilterFactory" synonyms="synonyms.txt" ignoreCase="true" expand="true"/>
+        <filter class="solr.LowerCaseFilterFactory"/>
+      </analyzer>
+    </fieldType>
+
+    <!-- A text field with defaults appropriate for English: it
+         tokenizes with StandardTokenizer, removes English stop words
+         (stopwords_en.txt), down cases, protects words from protwords.txt, and
+         finally applies Porter's stemming.  The query time analyzer
+         also applies synonyms from synonyms.txt. -->
+    <fieldType name="text_en" class="solr.TextField" positionIncrementGap="100">
+      <analyzer type="index">
+        <tokenizer class="solr.StandardTokenizerFactory"/>
+        <!-- in this example, we will only use synonyms at query time
+        <filter class="solr.SynonymFilterFactory" synonyms="index_synonyms.txt" ignoreCase="true" expand="false"/>
+        -->
+        <!-- Case insensitive stop word removal.
+          add enablePositionIncrements=true in both the index and query
+          analyzers to leave a 'gap' for more accurate phrase queries.
+        -->
+        <filter class="solr.StopFilterFactory"
+                ignoreCase="true"
+                words="stopwords_en.txt"
+                enablePositionIncrements="true"
+                />
+        <filter class="solr.LowerCaseFilterFactory"/>
+	<filter class="solr.EnglishPossessiveFilterFactory"/>
+        <filter class="solr.KeywordMarkerFilterFactory" protected="protwords.txt"/>
+	<!-- Optionally you may want to use this less aggressive stemmer instead of PorterStemFilterFactory:
+        <filter class="solr.EnglishMinimalStemFilterFactory"/>
+	-->
+        <filter class="solr.PorterStemFilterFactory"/>
+      </analyzer>
+      <analyzer type="query">
+        <tokenizer class="solr.StandardTokenizerFactory"/>
+        <filter class="solr.SynonymFilterFactory" synonyms="synonyms.txt" ignoreCase="true" expand="true"/>
+        <filter class="solr.StopFilterFactory"
+                ignoreCase="true"
+                words="stopwords_en.txt"
+                enablePositionIncrements="true"
+                />
+        <filter class="solr.LowerCaseFilterFactory"/>
+	<filter class="solr.EnglishPossessiveFilterFactory"/>
+        <filter class="solr.KeywordMarkerFilterFactory" protected="protwords.txt"/>
+	<!-- Optionally you may want to use this less aggressive stemmer instead of PorterStemFilterFactory:
+        <filter class="solr.EnglishMinimalStemFilterFactory"/>
+	-->
+        <filter class="solr.PorterStemFilterFactory"/>
+      </analyzer>
+    </fieldType>
+
+    <!-- A text field with defaults appropriate for English, plus
+	 aggressive word-splitting and autophrase features enabled.
+	 This field is just like text_en, except it adds
+	 WordDelimiterFilter to enable splitting and matching of
+	 words on case-change, alpha numeric boundaries, and
+	 non-alphanumeric chars.  This means certain compound word
+	 cases will work, for example query "wi fi" will match
+	 document "WiFi" or "wi-fi".  However, other cases will still
+	 not match, for example if the query is "wifi" and the
+	 document is "wi fi" or if the query is "wi-fi" and the
+	 document is "wifi".
+        -->
+    <fieldType name="text_en_splitting" class="solr.TextField" positionIncrementGap="100" autoGeneratePhraseQueries="true">
+      <analyzer type="index">
+        <tokenizer class="solr.WhitespaceTokenizerFactory"/>
+        <!-- in this example, we will only use synonyms at query time
+        <filter class="solr.SynonymFilterFactory" synonyms="index_synonyms.txt" ignoreCase="true" expand="false"/>
+        -->
+        <!-- Case insensitive stop word removal.
+          add enablePositionIncrements=true in both the index and query
+          analyzers to leave a 'gap' for more accurate phrase queries.
+        -->
+        <filter class="solr.StopFilterFactory"
+                ignoreCase="true"
+                words="stopwords_en.txt"
+                enablePositionIncrements="true"
+                />
+        <filter class="solr.WordDelimiterFilterFactory" generateWordParts="1" generateNumberParts="1" catenateWords="1" catenateNumbers="1" catenateAll="0" splitOnCaseChange="1"/>
+        <filter class="solr.LowerCaseFilterFactory"/>
+        <filter class="solr.KeywordMarkerFilterFactory" protected="protwords.txt"/>
+        <filter class="solr.PorterStemFilterFactory"/>
+      </analyzer>
+      <analyzer type="query">
+        <tokenizer class="solr.WhitespaceTokenizerFactory"/>
+        <filter class="solr.SynonymFilterFactory" synonyms="synonyms.txt" ignoreCase="true" expand="true"/>
+        <filter class="solr.StopFilterFactory"
+                ignoreCase="true"
+                words="stopwords_en.txt"
+                enablePositionIncrements="true"
+                />
+        <filter class="solr.WordDelimiterFilterFactory" generateWordParts="1" generateNumberParts="1" catenateWords="0" catenateNumbers="0" catenateAll="0" splitOnCaseChange="1"/>
+        <filter class="solr.LowerCaseFilterFactory"/>
+        <filter class="solr.KeywordMarkerFilterFactory" protected="protwords.txt"/>
+        <filter class="solr.PorterStemFilterFactory"/>
+      </analyzer>
+    </fieldType>
+
+    <!-- Less flexible matching, but less false matches.  Probably not ideal for product names,
+         but may be good for SKUs.  Can insert dashes in the wrong place and still match. -->
+    <fieldType name="text_en_splitting_tight" class="solr.TextField" positionIncrementGap="100" autoGeneratePhraseQueries="true">
+      <analyzer>
+        <tokenizer class="solr.WhitespaceTokenizerFactory"/>
+        <filter class="solr.SynonymFilterFactory" synonyms="synonyms.txt" ignoreCase="true" expand="false"/>
+        <filter class="solr.StopFilterFactory" ignoreCase="true" words="stopwords_en.txt"/>
+        <filter class="solr.WordDelimiterFilterFactory" generateWordParts="0" generateNumberParts="0" catenateWords="1" catenateNumbers="1" catenateAll="0"/>
+        <filter class="solr.LowerCaseFilterFactory"/>
+        <filter class="solr.KeywordMarkerFilterFactory" protected="protwords.txt"/>
+        <filter class="solr.EnglishMinimalStemFilterFactory"/>
+        <!-- this filter can remove any duplicate tokens that appear at the same position - sometimes
+             possible with WordDelimiterFilter in conjuncton with stemming. -->
+        <filter class="solr.RemoveDuplicatesTokenFilterFactory"/>
+      </analyzer>
+    </fieldType>
+
+    <!-- Just like text_general except it reverses the characters of
+	 each token, to enable more efficient leading wildcard queries. -->
+    <fieldType name="text_general_rev" class="solr.TextField" positionIncrementGap="100">
+      <analyzer type="index">
+        <tokenizer class="solr.StandardTokenizerFactory"/>
+        <filter class="solr.StopFilterFactory" ignoreCase="true" words="stopwords.txt" enablePositionIncrements="true" />
+        <filter class="solr.LowerCaseFilterFactory"/>
+        <filter class="solr.ReversedWildcardFilterFactory" withOriginal="true"
+           maxPosAsterisk="3" maxPosQuestion="2" maxFractionAsterisk="0.33"/>
+      </analyzer>
+      <analyzer type="query">
+        <tokenizer class="solr.StandardTokenizerFactory"/>
+        <filter class="solr.SynonymFilterFactory" synonyms="synonyms.txt" ignoreCase="true" expand="true"/>
+        <filter class="solr.StopFilterFactory" ignoreCase="true" words="stopwords.txt" enablePositionIncrements="true" />
+        <filter class="solr.LowerCaseFilterFactory"/>
+      </analyzer>
+    </fieldType>
+
+    <!-- charFilter + WhitespaceTokenizer  -->
+    <!--
+    <fieldType name="text_char_norm" class="solr.TextField" positionIncrementGap="100" >
+      <analyzer>
+        <charFilter class="solr.MappingCharFilterFactory" mapping="mapping-ISOLatin1Accent.txt"/>
+        <tokenizer class="solr.WhitespaceTokenizerFactory"/>
+      </analyzer>
+    </fieldType>
+    -->
+
+    <!-- This is an example of using the KeywordTokenizer along
+         With various TokenFilterFactories to produce a sortable field
+         that does not include some properties of the source text
+      -->
+    <fieldType name="alphaOnlySort" class="solr.TextField" sortMissingLast="true" omitNorms="true">
+      <analyzer>
+        <!-- KeywordTokenizer does no actual tokenizing, so the entire
+             input string is preserved as a single token
+          -->
+        <tokenizer class="solr.KeywordTokenizerFactory"/>
+        <!-- The LowerCase TokenFilter does what you expect, which can be
+             when you want your sorting to be case insensitive
+          -->
+        <filter class="solr.LowerCaseFilterFactory" />
+        <!-- The TrimFilter removes any leading or trailing whitespace -->
+        <filter class="solr.TrimFilterFactory" />
+        <!-- The PatternReplaceFilter gives you the flexibility to use
+             Java Regular expression to replace any sequence of characters
+             matching a pattern with an arbitrary replacement string, 
+             which may include back references to portions of the original
+             string matched by the pattern.
+             
+             See the Java Regular Expression documentation for more
+             information on pattern and replacement string syntax.
+             
+             http://java.sun.com/j2se/1.5.0/docs/api/java/util/regex/package-summary.html
+          -->
+        <filter class="solr.PatternReplaceFilterFactory"
+                pattern="([^a-z])" replacement="" replace="all"
+        />
+      </analyzer>
+    </fieldType>
+    
+    <fieldtype name="phonetic" stored="false" indexed="true" class="solr.TextField" >
+      <analyzer>
+        <tokenizer class="solr.StandardTokenizerFactory"/>
+        <filter class="solr.DoubleMetaphoneFilterFactory" inject="false"/>
+      </analyzer>
+    </fieldtype>
+
+    <fieldtype name="payloads" stored="false" indexed="true" class="solr.TextField" >
+      <analyzer>
+        <tokenizer class="solr.WhitespaceTokenizerFactory"/>
+        <!--
+        The DelimitedPayloadTokenFilter can put payloads on tokens... for example,
+        a token of "foo|1.4"  would be indexed as "foo" with a payload of 1.4f
+        Attributes of the DelimitedPayloadTokenFilterFactory : 
+         "delimiter" - a one character delimiter. Default is | (pipe)
+	 "encoder" - how to encode the following value into a playload
+	    float -> org.apache.lucene.analysis.payloads.FloatEncoder,
+	    integer -> o.a.l.a.p.IntegerEncoder
+	    identity -> o.a.l.a.p.IdentityEncoder
+            Fully Qualified class name implementing PayloadEncoder, Encoder must have a no arg constructor.
+         -->
+        <filter class="solr.DelimitedPayloadTokenFilterFactory" encoder="float"/>
+      </analyzer>
+    </fieldtype>
+
+    <!-- lowercases the entire field value, keeping it as a single token.  -->
+    <fieldType name="lowercase" class="solr.TextField" positionIncrementGap="100">
+      <analyzer>
+        <tokenizer class="solr.KeywordTokenizerFactory"/>
+        <filter class="solr.LowerCaseFilterFactory" />
+      </analyzer>
+    </fieldType>
+
+    <fieldType name="text_path" class="solr.TextField" positionIncrementGap="100">
+      <analyzer>
+        <tokenizer class="solr.PathHierarchyTokenizerFactory"/>
+      </analyzer>
+    </fieldType>
+
+    <!-- since fields of this type are by default not stored or indexed,
+         any data added to them will be ignored outright.  --> 
+    <fieldtype name="ignored" stored="false" indexed="false" multiValued="true" class="solr.StrField" />
+
+    <!-- This point type indexes the coordinates as separate fields (subFields)
+      If subFieldType is defined, it references a type, and a dynamic field
+      definition is created matching *___<typename>.  Alternately, if 
+      subFieldSuffix is defined, that is used to create the subFields.
+      Example: if subFieldType="double", then the coordinates would be
+        indexed in fields myloc_0___double,myloc_1___double.
+      Example: if subFieldSuffix="_d" then the coordinates would be indexed
+        in fields myloc_0_d,myloc_1_d
+      The subFields are an implementation detail of the fieldType, and end
+      users normally should not need to know about them.
+     -->
+    <fieldType name="point" class="solr.PointType" dimension="2" subFieldSuffix="_d"/>
+
+    <!-- A specialized field for geospatial search. If indexed, this fieldType must not be multivalued. -->
+    <fieldType name="location" class="solr.LatLonType" subFieldSuffix="_coordinate"/>
+
+   <!--
+    A Geohash is a compact representation of a latitude longitude pair in a single field.
+    See http://wiki.apache.org/solr/SpatialSearch
+   -->
+    <fieldtype name="geohash" class="solr.GeoHashField"/>
+ </types>
+
+
+ <fields>
+   <!-- Valid attributes for fields:
+     name: mandatory - the name for the field
+     type: mandatory - the name of a previously defined type from the 
+       <types> section
+     indexed: true if this field should be indexed (searchable or sortable)
+     stored: true if this field should be retrievable
+     multiValued: true if this field may contain multiple values per document
+     omitNorms: (expert) set to true to omit the norms associated with
+       this field (this disables length normalization and index-time
+       boosting for the field, and saves some memory).  Only full-text
+       fields or fields that need an index-time boost need norms.
+     termVectors: [false] set to true to store the term vector for a
+       given field.
+       When using MoreLikeThis, fields used for similarity should be
+       stored for best performance.
+     termPositions: Store position information with the term vector.  
+       This will increase storage costs.
+     termOffsets: Store offset information with the term vector. This 
+       will increase storage costs.
+     default: a value that should be used if no value is specified
+       when adding a document.
+   -->
+
+   <field name="docOID" type="string" indexed="true" stored="true" required="true" /> 
+
+    <field name="ZZ" type="text_en_splitting" indexed="true" stored="false" multiValued="true" />
+    <field name="TX" type="text_en_splitting" indexed="true" stored="false" multiValued="true" />
+    <field name="TI" type="text_en_splitting" indexed="true" stored="false" multiValued="true" />
+    <field name="SU" type="text_en_splitting" indexed="true" stored="false" multiValued="true" />
+    <field name="ORG" type="text_en_splitting" indexed="true" stored="false" multiValued="true" />
+
+<!--
+   <field name="sku" type="text_en_splitting_tight" indexed="true" stored="true" omitNorms="true"/>
+   <field name="name" type="text_general" indexed="true" stored="true"/>
+   <field name="alphaNameSort" type="alphaOnlySort" indexed="true" stored="false"/>
+   <field name="manu" type="text_general" indexed="true" stored="true" omitNorms="true"/>
+   <field name="cat" type="string" indexed="true" stored="true" multiValued="true"/>
+   <field name="features" type="text_general" indexed="true" stored="true" multiValued="true"/>
+   <field name="includes" type="text_general" indexed="true" stored="true" termVectors="true" termPositions="true" termOffsets="true" />
+
+   <field name="weight" type="float" indexed="true" stored="true"/>
+   <field name="price"  type="float" indexed="true" stored="true"/>
+   <field name="popularity" type="int" indexed="true" stored="true" />
+   <field name="inStock" type="boolean" indexed="true" stored="true" />
+-->
+
+   <!--
+   The following store examples are used to demonstrate the various ways one might _CHOOSE_ to
+    implement spatial.  It is highly unlikely that you would ever have ALL of these fields defined.
+    -->
+   <field name="store" type="location" indexed="true" stored="true"/>
+
+   <!-- Common metadata fields, named specifically to match up with
+     SolrCell metadata when parsing rich documents such as Word, PDF.
+     Some fields are multiValued only because Tika currently may return
+     multiple values for them.
+   -->
+<!--
+   <field name="title" type="text_general" indexed="true" stored="true" multiValued="true"/>
+   <field name="subject" type="text_general" indexed="true" stored="true"/>
+   <field name="description" type="text_general" indexed="true" stored="true"/>
+   <field name="comments" type="text_general" indexed="true" stored="true"/>
+   <field name="author" type="text_general" indexed="true" stored="true"/>
+   <field name="keywords" type="text_general" indexed="true" stored="true"/>
+   <field name="category" type="text_general" indexed="true" stored="true"/>
+   <field name="content_type" type="string" indexed="true" stored="true" multiValued="true"/>
+   <field name="last_modified" type="date" indexed="true" stored="true"/>
+   <field name="links" type="string" indexed="true" stored="true" multiValued="true"/>
+-->
+
+
+   <!-- catchall field, containing all other searchable text fields (implemented
+        via copyField further on in this schema  -->
+   <field name="text" type="text_general" indexed="true" stored="false" multiValued="true"/>
+
+   <!-- catchall text field that indexes tokens both normally and in reverse for efficient
+        leading wildcard queries. -->
+   <field name="text_rev" type="text_general_rev" indexed="true" stored="false" multiValued="true"/>
+
+   <!-- non-tokenized version of manufacturer to make it easier to sort or group
+        results by manufacturer.  copied from "manu" via copyField -->
+   <field name="manu_exact" type="string" indexed="true" stored="false"/>
+
+   <field name="payloads" type="payloads" indexed="true" stored="true"/>
+
+   <!-- Uncommenting the following will create a "timestamp" field using
+        a default value of "NOW" to indicate when each document was indexed.
+     -->
+   <!--
+   <field name="timestamp" type="date" indexed="true" stored="true" default="NOW" multiValued="false"/>
+     -->
+   
+
+   <!-- Dynamic field definitions.  If a field name is not found, dynamicFields
+        will be used if the name matches any of the patterns.
+        RESTRICTION: the glob-like pattern in the name attribute must have
+        a "*" only at the start or the end.
+        EXAMPLE:  name="*_i" will match any field ending in _i (like myid_i, z_i)
+        Longer patterns will be matched first.  if equal size patterns
+        both match, the first appearing in the schema will be used.  -->
+   <dynamicField name="*_i"  type="int"    indexed="true"  stored="true"/>
+   <dynamicField name="*_s"  type="string"  indexed="true"  stored="true"/>
+   <dynamicField name="*_l"  type="long"   indexed="true"  stored="true"/>
+   <dynamicField name="*_t"  type="text_general"    indexed="true"  stored="true"/>
+   <dynamicField name="*_txt" type="text_general"    indexed="true"  stored="true" multiValued="true"/>
+   <dynamicField name="*_b"  type="boolean" indexed="true"  stored="true"/>
+   <dynamicField name="*_f"  type="float"  indexed="true"  stored="true"/>
+   <dynamicField name="*_d"  type="double" indexed="true"  stored="true"/>
+
+   <!-- Type used to index the lat and lon components for the "location" FieldType -->
+   <dynamicField name="*_coordinate"  type="tdouble" indexed="true"  stored="false"/>
+
+   <dynamicField name="*_dt" type="date"    indexed="true"  stored="true"/>
+   <dynamicField name="*_p"  type="location" indexed="true" stored="true"/>
+
+   <!-- some trie-coded dynamic fields for faster range queries -->
+   <dynamicField name="*_ti" type="tint"    indexed="true"  stored="true"/>
+   <dynamicField name="*_tl" type="tlong"   indexed="true"  stored="true"/>
+   <dynamicField name="*_tf" type="tfloat"  indexed="true"  stored="true"/>
+   <dynamicField name="*_td" type="tdouble" indexed="true"  stored="true"/>
+   <dynamicField name="*_tdt" type="tdate"  indexed="true"  stored="true"/>
+
+   <dynamicField name="*_pi"  type="pint"    indexed="true"  stored="true"/>
+
+   <dynamicField name="ignored_*" type="ignored" multiValued="true"/>
+   <dynamicField name="attr_*" type="text_general" indexed="true" stored="true" multiValued="true"/>
+
+   <dynamicField name="random_*" type="random" />
+<!-- dynamic field for sort/facet fields, which are strings by default. ie not tokenised -->
+    <dynamicField name="by*" type="string" indexed="true" stored="false" multiValued="true" />
+   <!-- uncomment the following to ignore any fields that don't already match an existing 
+        field name or dynamic field, rather than reporting them as an error. 
+        alternately, change the type="ignored" to some other type e.g. "text" if you want 
+        unknown fields indexed and/or stored by default --> 
+   <!--dynamicField name="*" type="ignored" multiValued="true" /-->
+   
+ </fields>
+
+ <!-- Field to use to determine and enforce document uniqueness. 
+      Unless this field is marked with required="false", it will be a required field
+   -->
+ <uniqueKey>docOID</uniqueKey>
+
+ <!-- field for the QueryParser to use when an explicit fieldname is absent -->
+ <defaultSearchField>text</defaultSearchField>
+
+ <!-- SolrQueryParser configuration: defaultOperator="AND|OR" -->
+ <solrQueryParser defaultOperator="OR"/>
+
+  <!-- copyField commands copy one field to another at the time a document
+        is added to the index.  It's used either to index the same field differently,
+        or to add multiple fields to the same field for easier/faster searching.  -->
+
+<!--
+   <copyField source="cat" dest="text"/>
+   <copyField source="name" dest="text"/>
+   <copyField source="manu" dest="text"/>
+   <copyField source="features" dest="text"/>
+   <copyField source="includes" dest="text"/>
+   <copyField source="manu" dest="manu_exact"/>
+-->
+	
+   <!-- Above, multiple source fields are copied to the [text] field. 
+	  Another way to map multiple source fields to the same 
+	  destination field is to use the dynamic field syntax. 
+	  copyField also supports a maxChars to copy setting.  -->
+	   
+   <!-- <copyField source="*_t" dest="text" maxChars="3000"/> -->
+
+   <!-- copy name to alphaNameSort, a field designed for sorting by name -->
+   <!-- <copyField source="name" dest="alphaNameSort"/> -->
+ 
+
+ <!-- Similarity is the scoring routine for each document vs. a query.
+      A custom similarity may be specified here, but the default is fine
+      for most applications.  -->
+ <!-- <similarity class="org.apache.lucene.search.DefaultSimilarity"/> -->
+ <!-- ... OR ...
+      Specify a SimilarityFactory class name implementation
+      allowing parameters to be used.
+ -->
+ <!--
+ <similarity class="com.example.solr.CustomSimilarityFactory">
+   <str name="paramkey">param value</str>
+ </similarity>
+ -->
+
+
+</schema>
Index: /gs3-extensions/solr/trunk/src/collect/solr-jdbm-demo/etc/conf/solrconfig.xml
===================================================================
--- /gs3-extensions/solr/trunk/src/collect/solr-jdbm-demo/etc/conf/solrconfig.xml	(revision 27850)
+++ /gs3-extensions/solr/trunk/src/collect/solr-jdbm-demo/etc/conf/solrconfig.xml	(revision 27850)
@@ -0,0 +1,1533 @@
+<?xml version="1.0" encoding="UTF-8" ?>
+<!--
+ Licensed to the Apache Software Foundation (ASF) under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The ASF licenses this file to You under the Apache License, Version 2.0
+ (the "License"); you may not use this file except in compliance with
+ the License.  You may obtain a copy of the License at
+
+     http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+
+<!-- 
+     For more details about configurations options that may appear in
+     this file, see http://wiki.apache.org/solr/SolrConfigXml. 
+-->
+<config>
+  <!-- In all configuration below, a prefix of "solr." for class names
+       is an alias that causes solr to search appropriate packages,
+       including org.apache.solr.(search|update|request|core|analysis)
+
+       You may also specify a fully qualified Java classname if you
+       have your own custom plugins.
+    -->
+
+  <!-- Set this to 'false' if you want solr to continue working after
+       it has encountered an severe configuration error.  In a
+       production environment, you may want solr to keep working even
+       if one handler is mis-configured.
+
+       You may also set this to false using by setting the system
+       property:
+
+         -Dsolr.abortOnConfigurationError=false
+    -->
+  <abortOnConfigurationError>${solr.abortOnConfigurationError:true}</abortOnConfigurationError>
+  
+  <!-- Controls what version of Lucene various components of Solr
+       adhere to.  Generally, you want to use the latest version to
+       get all bug fixes and improvements. It is highly recommended
+       that you fully re-index after changing this setting as it can
+       affect both how text is indexed and queried.
+    -->
+  <luceneMatchVersion>LUCENE_33</luceneMatchVersion>
+
+  <!-- lib directives can be used to instruct Solr to load an Jars
+       identified and use them to resolve any "plugins" specified in
+       your solrconfig.xml or schema.xml (ie: Analyzers, Request
+       Handlers, etc...).
+
+       All directories and paths are resolved relative to the
+       instanceDir.
+
+       If a "./lib" directory exists in your instanceDir, all files
+       found in it are included as if you had used the following
+       syntax...
+       
+              <lib dir="./lib" />
+    -->
+  <!-- A dir option by itself adds any files found in the directory to
+       the classpath, this is useful for including all jars in a
+       directory.
+    -->
+  <lib dir="../../contrib/extraction/lib" />
+  <!-- When a regex is specified in addition to a directory, only the
+       files in that directory which completely match the regex
+       (anchored on both ends) will be included.
+    -->
+  <lib dir="../../dist/" regex="apache-solr-cell-\d.*\.jar" />
+  <lib dir="../../dist/" regex="apache-solr-clustering-\d.*\.jar" />
+  <lib dir="../../dist/" regex="apache-solr-dataimporthandler-\d.*\.jar" />
+
+  <!-- If a dir option (with or without a regex) is used and nothing
+       is found that matches, it will be ignored
+    -->
+  <lib dir="../../contrib/clustering/lib/" />
+  <lib dir="/total/crap/dir/ignored" /> 
+  <!-- an exact path can be used to specify a specific file.  This
+       will cause a serious error to be logged if it can't be loaded.
+    -->
+  <!--
+  <lib path="../a-jar-that-does-not-exist.jar" /> 
+  -->
+  
+  <!-- Data Directory
+
+       Used to specify an alternate directory to hold all index data
+       other than the default ./data under the Solr home.  If
+       replication is in use, this should match the replication
+       configuration.
+    -->
+  <dataDir>${solr.data.dir:}</dataDir>
+
+
+  <!-- The DirectoryFactory to use for indexes.
+       
+       solr.StandardDirectoryFactory, the default, is filesystem
+       based.  solr.RAMDirectoryFactory is memory based, not
+       persistent, and doesn't work with replication.
+    -->
+  <directoryFactory name="DirectoryFactory" 
+                    class="${solr.directoryFactory:solr.StandardDirectoryFactory}"/>
+
+
+  <!-- Index Defaults
+
+       Values here affect all index writers and act as a default
+       unless overridden.
+
+       WARNING: See also the <mainIndex> section below for parameters
+       that overfor Solr's main Lucene index.
+    -->
+  <indexDefaults>
+
+    <useCompoundFile>false</useCompoundFile>
+
+    <mergeFactor>10</mergeFactor>
+    <!-- Sets the amount of RAM that may be used by Lucene indexing
+         for buffering added documents and deletions before they are
+         flushed to the Directory.  -->
+    <ramBufferSizeMB>32</ramBufferSizeMB>
+    <!-- If both ramBufferSizeMB and maxBufferedDocs is set, then
+         Lucene will flush based on whichever limit is hit first.  
+      -->
+    <!-- <maxBufferedDocs>1000</maxBufferedDocs> -->
+
+    <maxFieldLength>10000</maxFieldLength>
+    <writeLockTimeout>1000</writeLockTimeout>
+    <commitLockTimeout>10000</commitLockTimeout>
+
+    <!-- Expert: Merge Policy 
+
+         The Merge Policy in Lucene controls how merging is handled by
+         Lucene.  The default in Solr 3.3 is TieredMergePolicy.
+         
+         The default in 2.3 was the LogByteSizeMergePolicy,
+         previous versions used LogDocMergePolicy.
+         
+         LogByteSizeMergePolicy chooses segments to merge based on
+         their size.  The Lucene 2.2 default, LogDocMergePolicy chose
+         when to merge based on number of documents
+         
+         Other implementations of MergePolicy must have a no-argument
+         constructor
+      -->
+    <!--
+       <mergePolicy class="org.apache.lucene.index.TieredMergePolicy"/>
+       -->
+
+    <!-- Expert: Merge Scheduler
+
+         The Merge Scheduler in Lucene controls how merges are
+         performed.  The ConcurrentMergeScheduler (Lucene 2.3 default)
+         can perform merges in the background using separate threads.
+         The SerialMergeScheduler (Lucene 2.2 default) does not.
+     -->
+    <!-- 
+       <mergeScheduler class="org.apache.lucene.index.ConcurrentMergeScheduler"/>
+       -->
+	  
+    <!-- LockFactory 
+
+         This option specifies which Lucene LockFactory implementation
+         to use.
+      
+         single = SingleInstanceLockFactory - suggested for a
+                  read-only index or when there is no possibility of
+                  another process trying to modify the index.
+         native = NativeFSLockFactory - uses OS native file locking.
+                  Do not use when multiple solr webapps in the same
+                  JVM are attempting to share a single index.
+         simple = SimpleFSLockFactory  - uses a plain file for locking
+
+         (For backwards compatibility with Solr 1.2, 'simple' is the
+         default if not specified.)
+
+         More details on the nuances of each LockFactory...
+         http://wiki.apache.org/lucene-java/AvailableLockFactories
+    -->
+    <lockType>native</lockType>
+
+    <!-- Expert: Controls how often Lucene loads terms into memory
+         Default is 128 and is likely good for most everyone.
+      -->
+    <!-- <termIndexInterval>256</termIndexInterval> -->
+  </indexDefaults>
+
+  <!-- Main Index
+
+       Values here override the values in the <indexDefaults> section
+       for the main on disk index.
+    -->
+  <mainIndex>
+
+    <useCompoundFile>false</useCompoundFile>
+    <ramBufferSizeMB>32</ramBufferSizeMB>
+    <mergeFactor>10</mergeFactor>
+
+    <!-- Unlock On Startup
+
+         If true, unlock any held write or commit locks on startup.
+         This defeats the locking mechanism that allows multiple
+         processes to safely access a lucene index, and should be used
+         with care.
+
+         This is not needed if lock type is 'none' or 'single'
+     -->
+    <unlockOnStartup>false</unlockOnStartup>
+    
+    <!-- If true, IndexReaders will be reopened (often more efficient)
+         instead of closed and then opened.
+      -->
+    <reopenReaders>true</reopenReaders>
+
+    <!-- Commit Deletion Policy
+
+         Custom deletion policies can specified here. The class must
+         implement org.apache.lucene.index.IndexDeletionPolicy.
+
+         http://lucene.apache.org/java/2_9_1/api/all/org/apache/lucene/index/IndexDeletionPolicy.html
+
+         The standard Solr IndexDeletionPolicy implementation supports
+         deleting index commit points on number of commits, age of
+         commit point and optimized status.
+         
+         The latest commit point should always be preserved regardless
+         of the criteria.
+    -->
+    <deletionPolicy class="solr.SolrDeletionPolicy">
+      <!-- The number of commit points to be kept -->
+      <str name="maxCommitsToKeep">1</str>
+      <!-- The number of optimized commit points to be kept -->
+      <str name="maxOptimizedCommitsToKeep">0</str>
+      <!--
+          Delete all commit points once they have reached the given age.
+          Supports DateMathParser syntax e.g.
+        -->
+      <!--
+         <str name="maxCommitAge">30MINUTES</str>
+         <str name="maxCommitAge">1DAY</str>
+      -->
+    </deletionPolicy>
+
+    <!-- Lucene Infostream
+       
+         To aid in advanced debugging, Lucene provides an "InfoStream"
+         of detailed information when indexing.
+
+         Setting The value to true will instruct the underlying Lucene
+         IndexWriter to write its debugging info the specified file
+      -->
+     <infoStream file="INFOSTREAM.txt">false</infoStream> 
+
+  </mainIndex>
+
+  <!-- JMX
+       
+       This example enables JMX if and only if an existing MBeanServer
+       is found, use this if you want to configure JMX through JVM
+       parameters. Remove this to disable exposing Solr configuration
+       and statistics to JMX.
+
+       For more details see http://wiki.apache.org/solr/SolrJmx
+    -->
+  <jmx />
+  <!-- If you want to connect to a particular server, specify the
+       agentId 
+    -->
+  <!-- <jmx agentId="myAgent" /> -->
+  <!-- If you want to start a new MBeanServer, specify the serviceUrl -->
+  <!-- <jmx serviceUrl="service:jmx:rmi:///jndi/rmi://localhost:9999/solr"/>
+    -->
+
+  <!-- The default high-performance update handler -->
+  <updateHandler class="solr.DirectUpdateHandler2">
+
+    <!-- AutoCommit
+
+         Perform a <commit/> automatically under certain conditions.
+         Instead of enabling autoCommit, consider using "commitWithin"
+         when adding documents. 
+
+         http://wiki.apache.org/solr/UpdateXmlMessages
+
+         maxDocs - Maximum number of documents to add since the last
+                   commit before automatically triggering a new commit.
+
+         maxTime - Maximum amount of time that is allowed to pass
+                   since a document was added before automaticly
+                   triggering a new commit. 
+      -->
+    <!--
+       <autoCommit> 
+         <maxDocs>10000</maxDocs>
+         <maxTime>1000</maxTime> 
+       </autoCommit>
+      -->
+
+    <!-- Update Related Event Listeners
+         
+         Various IndexWriter related events can trigger Listeners to
+         take actions.
+
+         postCommit - fired after every commit or optimize command
+         postOptimize - fired after every optimize command
+      -->
+    <!-- The RunExecutableListener executes an external command from a
+         hook such as postCommit or postOptimize.
+         
+         exe - the name of the executable to run
+         dir - dir to use as the current working directory. (default=".")
+         wait - the calling thread waits until the executable returns. 
+                (default="true")
+         args - the arguments to pass to the program.  (default is none)
+         env - environment variables to set.  (default is none)
+      -->
+    <!-- This example shows how RunExecutableListener could be used
+         with the script based replication...
+         http://wiki.apache.org/solr/CollectionDistribution
+      -->
+    <!--
+       <listener event="postCommit" class="solr.RunExecutableListener">
+         <str name="exe">solr/bin/snapshooter</str>
+         <str name="dir">.</str>
+         <bool name="wait">true</bool>
+         <arr name="args"> <str>arg1</str> <str>arg2</str> </arr>
+         <arr name="env"> <str>MYVAR=val1</str> </arr>
+       </listener>
+      -->
+  </updateHandler>
+  
+  <!-- IndexReaderFactory
+
+       Use the following format to specify a custom IndexReaderFactory,
+       which allows for alternate IndexReader implementations.
+
+       ** Experimental Feature **
+
+       Please note - Using a custom IndexReaderFactory may prevent
+       certain other features from working. The API to
+       IndexReaderFactory may change without warning or may even be
+       removed from future releases if the problems cannot be
+       resolved.
+
+
+       ** Features that may not work with custom IndexReaderFactory **
+
+       The ReplicationHandler assumes a disk-resident index. Using a
+       custom IndexReader implementation may cause incompatibility
+       with ReplicationHandler and may cause replication to not work
+       correctly. See SOLR-1366 for details.
+
+    -->
+  <!--
+  <indexReaderFactory name="IndexReaderFactory" class="package.class">
+    <str name="someArg">Some Value</str>
+  </indexReaderFactory >
+  -->
+  <!-- By explicitly declaring the Factory, the termIndexDivisor can
+       be specified.
+    -->
+  <!--
+     <indexReaderFactory name="IndexReaderFactory" 
+                         class="solr.StandardIndexReaderFactory">
+       <int name="setTermIndexDivisor">12</int>
+     </indexReaderFactory >
+    -->
+
+
+  <query>
+    <!-- Max Boolean Clauses
+
+         Maximum number of clauses in each BooleanQuery,  an exception
+         is thrown if exceeded.
+
+         ** WARNING **
+         
+         This option actually modifies a global Lucene property that
+         will affect all SolrCores.  If multiple solrconfig.xml files
+         disagree on this property, the value at any given moment will
+         be based on the last SolrCore to be initialized.
+         
+      -->
+    <maxBooleanClauses>1024</maxBooleanClauses>
+
+
+    <!-- Solr Internal Query Caches
+
+         There are two implementations of cache available for Solr,
+         LRUCache, based on a synchronized LinkedHashMap, and
+         FastLRUCache, based on a ConcurrentHashMap.  
+
+         FastLRUCache has faster gets and slower puts in single
+         threaded operation and thus is generally faster than LRUCache
+         when the hit ratio of the cache is high (> 75%), and may be
+         faster under other scenarios on multi-cpu systems.
+    -->
+
+    <!-- Filter Cache
+
+         Cache used by SolrIndexSearcher for filters (DocSets),
+         unordered sets of *all* documents that match a query.  When a
+         new searcher is opened, its caches may be prepopulated or
+         "autowarmed" using data from caches in the old searcher.
+         autowarmCount is the number of items to prepopulate.  For
+         LRUCache, the autowarmed items will be the most recently
+         accessed items.
+
+         Parameters:
+           class - the SolrCache implementation LRUCache or
+               (LRUCache or FastLRUCache)
+           size - the maximum number of entries in the cache
+           initialSize - the initial capacity (number of entries) of
+               the cache.  (see java.util.HashMap)
+           autowarmCount - the number of entries to prepopulate from
+               and old cache.  
+      -->
+    <filterCache class="solr.FastLRUCache"
+                 size="512"
+                 initialSize="512"
+                 autowarmCount="0"/>
+
+    <!-- Query Result Cache
+         
+         Caches results of searches - ordered lists of document ids
+         (DocList) based on a query, a sort, and the range of documents requested.  
+      -->
+    <queryResultCache class="solr.LRUCache"
+                     size="512"
+                     initialSize="512"
+                     autowarmCount="0"/>
+   
+    <!-- Document Cache
+
+         Caches Lucene Document objects (the stored fields for each
+         document).  Since Lucene internal document ids are transient,
+         this cache will not be autowarmed.  
+      -->
+    <documentCache class="solr.LRUCache"
+                   size="512"
+                   initialSize="512"
+                   autowarmCount="0"/>
+    
+    <!-- Field Value Cache
+         
+         Cache used to hold field values that are quickly accessible
+         by document id.  The fieldValueCache is created by default
+         even if not configured here.
+      -->
+    <!--
+       <fieldValueCache class="solr.FastLRUCache"
+                        size="512"
+                        autowarmCount="128"
+                        showItems="32" />
+      -->
+
+    <!-- Custom Cache
+
+         Example of a generic cache.  These caches may be accessed by
+         name through SolrIndexSearcher.getCache(),cacheLookup(), and
+         cacheInsert().  The purpose is to enable easy caching of
+         user/application level data.  The regenerator argument should
+         be specified as an implementation of solr.CacheRegenerator 
+         if autowarming is desired.  
+      -->
+    <!--
+       <cache name="myUserCache"
+              class="solr.LRUCache"
+              size="4096"
+              initialSize="1024"
+              autowarmCount="1024"
+              regenerator="com.mycompany.MyRegenerator"
+              />
+      -->
+
+
+    <!-- Lazy Field Loading
+
+         If true, stored fields that are not requested will be loaded
+         lazily.  This can result in a significant speed improvement
+         if the usual case is to not load all stored fields,
+         especially if the skipped fields are large compressed text
+         fields.
+    -->
+    <enableLazyFieldLoading>true</enableLazyFieldLoading>
+
+   <!-- Use Filter For Sorted Query
+
+        A possible optimization that attempts to use a filter to
+        satisfy a search.  If the requested sort does not include
+        score, then the filterCache will be checked for a filter
+        matching the query. If found, the filter will be used as the
+        source of document ids, and then the sort will be applied to
+        that.
+
+        For most situations, this will not be useful unless you
+        frequently get the same search repeatedly with different sort
+        options, and none of them ever use "score"
+     -->
+   <!--
+      <useFilterForSortedQuery>true</useFilterForSortedQuery>
+     -->
+
+   <!-- Result Window Size
+
+        An optimization for use with the queryResultCache.  When a search
+        is requested, a superset of the requested number of document ids
+        are collected.  For example, if a search for a particular query
+        requests matching documents 10 through 19, and queryWindowSize is 50,
+        then documents 0 through 49 will be collected and cached.  Any further
+        requests in that range can be satisfied via the cache.  
+     -->
+   <queryResultWindowSize>20</queryResultWindowSize>
+
+   <!-- Maximum number of documents to cache for any entry in the
+        queryResultCache. 
+     -->
+   <queryResultMaxDocsCached>200</queryResultMaxDocsCached>
+
+   <!-- Query Related Event Listeners
+
+        Various IndexSearcher related events can trigger Listeners to
+        take actions.
+
+        newSearcher - fired whenever a new searcher is being prepared
+        and there is a current searcher handling requests (aka
+        registered).  It can be used to prime certain caches to
+        prevent long request times for certain requests.
+
+        firstSearcher - fired whenever a new searcher is being
+        prepared but there is no current registered searcher to handle
+        requests or to gain autowarming data from.
+
+        
+     -->
+    <!-- QuerySenderListener takes an array of NamedList and executes a
+         local query request for each NamedList in sequence. 
+      -->
+    <listener event="newSearcher" class="solr.QuerySenderListener">
+      <arr name="queries">
+        <!--
+           <lst><str name="q">solr</str><str name="sort">price asc</str></lst>
+           <lst><str name="q">rocks</str><str name="sort">weight asc</str></lst>
+          -->
+      </arr>
+    </listener>
+    <listener event="firstSearcher" class="solr.QuerySenderListener">
+      <arr name="queries">
+        <lst>
+          <str name="q">static firstSearcher warming in solrconfig.xml</str>
+        </lst>
+      </arr>
+    </listener>
+
+    <!-- Use Cold Searcher
+
+         If a search request comes in and there is no current
+         registered searcher, then immediately register the still
+         warming searcher and use it.  If "false" then all requests
+         will block until the first searcher is done warming.
+      -->
+    <useColdSearcher>false</useColdSearcher>
+
+    <!-- Max Warming Searchers
+         
+         Maximum number of searchers that may be warming in the
+         background concurrently.  An error is returned if this limit
+         is exceeded.
+
+         Recommend values of 1-2 for read-only slaves, higher for
+         masters w/o cache warming.
+      -->
+    <maxWarmingSearchers>2</maxWarmingSearchers>
+
+  </query>
+
+
+  <!-- Request Dispatcher
+
+       This section contains instructions for how the SolrDispatchFilter
+       should behave when processing requests for this SolrCore.
+
+       handleSelect affects the behavior of requests such as /select?qt=XXX
+
+       handleSelect="true" will cause the SolrDispatchFilter to process
+       the request and will result in consistent error handling and
+       formatting for all types of requests.
+
+       handleSelect="false" will cause the SolrDispatchFilter to
+       ignore "/select" requests and fallback to using the legacy
+       SolrServlet and it's Solr 1.1 style error formatting
+    -->
+  <requestDispatcher handleSelect="true" >
+    <!-- Request Parsing
+
+         These settings indicate how Solr Requests may be parsed, and
+         what restrictions may be placed on the ContentStreams from
+         those requests
+
+         enableRemoteStreaming - enables use of the stream.file
+         and stream.url parameters for specifying remote streams.
+
+         multipartUploadLimitInKB - specifies the max size of
+         Multipart File Uploads that Solr will allow in a Request.
+         
+         *** WARNING ***
+         The settings below authorize Solr to fetch remote files, You
+         should make sure your system has some authentication before
+         using enableRemoteStreaming="true"
+
+      --> 
+    <requestParsers enableRemoteStreaming="true" 
+                    multipartUploadLimitInKB="2048000" />
+
+    <!-- HTTP Caching
+
+         Set HTTP caching related parameters (for proxy caches and clients).
+
+         The options below instruct Solr not to output any HTTP Caching
+         related headers
+      -->
+    <httpCaching never304="true" />
+    <!-- If you include a <cacheControl> directive, it will be used to
+         generate a Cache-Control header (as well as an Expires header
+         if the value contains "max-age=")
+         
+         By default, no Cache-Control header is generated.
+         
+         You can use the <cacheControl> option even if you have set
+         never304="true"
+      -->
+    <!--
+       <httpCaching never304="true" >
+         <cacheControl>max-age=30, public</cacheControl> 
+       </httpCaching>
+      -->
+    <!-- To enable Solr to respond with automatically generated HTTP
+         Caching headers, and to response to Cache Validation requests
+         correctly, set the value of never304="false"
+         
+         This will cause Solr to generate Last-Modified and ETag
+         headers based on the properties of the Index.
+
+         The following options can also be specified to affect the
+         values of these headers...
+
+         lastModFrom - the default value is "openTime" which means the
+         Last-Modified value (and validation against If-Modified-Since
+         requests) will all be relative to when the current Searcher
+         was opened.  You can change it to lastModFrom="dirLastMod" if
+         you want the value to exactly correspond to when the physical
+         index was last modified.
+
+         etagSeed="..." is an option you can change to force the ETag
+         header (and validation against If-None-Match requests) to be
+         different even if the index has not changed (ie: when making
+         significant changes to your config file)
+
+         (lastModifiedFrom and etagSeed are both ignored if you use
+         the never304="true" option)
+      -->
+    <!--
+       <httpCaching lastModifiedFrom="openTime"
+                    etagSeed="Solr">
+         <cacheControl>max-age=30, public</cacheControl> 
+       </httpCaching>
+      -->
+  </requestDispatcher>
+
+  <!-- Request Handlers 
+
+       http://wiki.apache.org/solr/SolrRequestHandler
+
+       incoming queries will be dispatched to the correct handler
+       based on the path or the qt (query type) param.
+
+       Names starting with a '/' are accessed with the a path equal to
+       the registered name.  Names without a leading '/' are accessed
+       with: http://host/app/[core/]select?qt=name
+
+       If a /select request is processed with out a qt param
+       specified, the requestHandler that declares default="true" will
+       be used.
+       
+       If a Request Handler is declared with startup="lazy", then it will
+       not be initialized until the first request that uses it.
+
+    -->
+  <!-- SearchHandler
+
+       http://wiki.apache.org/solr/SearchHandler
+
+       For processing Search Queries, the primary Request Handler
+       provided with Solr is "SearchHandler" It delegates to a sequent
+       of SearchComponents (see below) and supports distributed
+       queries across multiple shards
+    -->
+  <requestHandler name="search" class="solr.SearchHandler" default="true">
+    <!-- default values for query parameters can be specified, these
+         will be overridden by parameters in the request
+      -->
+     <lst name="defaults">
+       <str name="echoParams">explicit</str>
+       <int name="rows">10</int>
+     </lst>
+    <!-- In addition to defaults, "appends" params can be specified
+         to identify values which should be appended to the list of
+         multi-val params from the query (or the existing "defaults").
+      -->
+    <!-- In this example, the param "fq=instock:true" would be appended to
+         any query time fq params the user may specify, as a mechanism for
+         partitioning the index, independent of any user selected filtering
+         that may also be desired (perhaps as a result of faceted searching).
+
+         NOTE: there is *absolutely* nothing a client can do to prevent these
+         "appends" values from being used, so don't use this mechanism
+         unless you are sure you always want it.
+      -->
+    <!--
+       <lst name="appends">
+         <str name="fq">inStock:true</str>
+       </lst>
+      -->
+    <!-- "invariants" are a way of letting the Solr maintainer lock down
+         the options available to Solr clients.  Any params values
+         specified here are used regardless of what values may be specified
+         in either the query, the "defaults", or the "appends" params.
+
+         In this example, the facet.field and facet.query params would
+         be fixed, limiting the facets clients can use.  Faceting is
+         not turned on by default - but if the client does specify
+         facet=true in the request, these are the only facets they
+         will be able to see counts for; regardless of what other
+         facet.field or facet.query params they may specify.
+
+         NOTE: there is *absolutely* nothing a client can do to prevent these
+         "invariants" values from being used, so don't use this mechanism
+         unless you are sure you always want it.
+      -->
+    <!--
+       <lst name="invariants">
+         <str name="facet.field">cat</str>
+         <str name="facet.field">manu_exact</str>
+         <str name="facet.query">price:[* TO 500]</str>
+         <str name="facet.query">price:[500 TO *]</str>
+       </lst>
+      -->
+    <!-- If the default list of SearchComponents is not desired, that
+         list can either be overridden completely, or components can be
+         prepended or appended to the default list.  (see below)
+      -->
+    <!--
+       <arr name="components">
+         <str>nameOfCustomComponent1</str>
+         <str>nameOfCustomComponent2</str>
+       </arr>
+      -->
+    </requestHandler>
+
+  <!-- A Robust Example
+
+       This example SearchHandler declaration shows off usage of the
+       SearchHandler with many defaults declared
+
+       Note that multiple instances of the same Request Handler
+       (SearchHandler) can be registered multiple times with different
+       names (and different init parameters)
+    -->
+  <requestHandler name="/browse" class="solr.SearchHandler">
+     <lst name="defaults">
+       <str name="echoParams">explicit</str>
+
+       <!-- VelocityResponseWriter settings -->
+       <str name="wt">velocity</str>
+
+       <str name="v.template">browse</str>
+       <str name="v.layout">layout</str>
+       <str name="title">Solritas</str>
+
+       <str name="defType">edismax</str>
+       <str name="q.alt">*:*</str>
+       <str name="rows">10</str>
+       <str name="fl">*,score</str>
+       <str name="mlt.qf">
+         text^0.5 features^1.0 name^1.2 sku^1.5 id^10.0 manu^1.1 cat^1.4
+       </str>
+       <str name="mlt.fl">text,features,name,sku,id,manu,cat</str>
+       <int name="mlt.count">3</int>
+
+       <str name="qf">
+          text^0.5 features^1.0 name^1.2 sku^1.5 id^10.0 manu^1.1 cat^1.4
+       </str>
+
+       <str name="facet">on</str>
+       <str name="facet.field">cat</str>
+       <str name="facet.field">manu_exact</str>
+       <str name="facet.query">ipod</str>
+       <str name="facet.query">GB</str>
+       <str name="facet.mincount">1</str>
+       <str name="facet.pivot">cat,inStock</str>
+       <str name="facet.range">price</str>
+       <int name="f.price.facet.range.start">0</int>
+       <int name="f.price.facet.range.end">600</int>
+       <int name="f.price.facet.range.gap">50</int>
+       <str name="f.price.facet.range.other">after</str>
+       <str name="facet.range">manufacturedate_dt</str>
+       <str name="f.manufacturedate_dt.facet.range.start">NOW/YEAR-10YEARS</str>
+       <str name="f.manufacturedate_dt.facet.range.end">NOW</str>
+       <str name="f.manufacturedate_dt.facet.range.gap">+1YEAR</str>
+       <str name="f.manufacturedate_dt.facet.range.other">before</str>
+       <str name="f.manufacturedate_dt.facet.range.other">after</str>
+
+
+       <!-- Highlighting defaults -->
+       <str name="hl">on</str>
+       <str name="hl.fl">text features name</str>
+       <str name="f.name.hl.fragsize">0</str>
+       <str name="f.name.hl.alternateField">name</str>
+     </lst>
+     <arr name="last-components">
+       <str>spellcheck</str>
+     </arr>
+     <!--
+     <str name="url-scheme">httpx</str>
+     -->
+  </requestHandler>
+
+  <!-- XML Update Request Handler.  
+       
+       http://wiki.apache.org/solr/UpdateXmlMessages
+
+       The canonical Request Handler for Modifying the Index through
+       commands specified using XML.
+
+       Note: Since solr1.1 requestHandlers requires a valid content
+       type header if posted in the body. For example, curl now
+       requires: -H 'Content-type:text/xml; charset=utf-8'
+    -->
+  <requestHandler name="/update" 
+                  class="solr.XmlUpdateRequestHandler">
+    <!-- See below for information on defining 
+         updateRequestProcessorChains that can be used by name 
+         on each Update Request
+      -->
+    <!--
+       <lst name="defaults">
+         <str name="update.chain">dedupe</str>
+       </lst>
+       -->
+    </requestHandler>
+  <!-- Binary Update Request Handler
+       http://wiki.apache.org/solr/javabin
+    -->
+  <requestHandler name="/update/javabin" 
+                  class="solr.BinaryUpdateRequestHandler" />
+
+  <!-- CSV Update Request Handler
+       http://wiki.apache.org/solr/UpdateCSV
+    -->
+  <requestHandler name="/update/csv" 
+                  class="solr.CSVRequestHandler" 
+                  startup="lazy" />
+
+  <!-- JSON Update Request Handler
+       http://wiki.apache.org/solr/UpdateJSON
+    -->
+  <requestHandler name="/update/json" 
+                  class="solr.JsonUpdateRequestHandler" 
+                  startup="lazy" />
+
+  <!-- Solr Cell Update Request Handler
+
+       http://wiki.apache.org/solr/ExtractingRequestHandler 
+
+    -->
+  <requestHandler name="/update/extract" 
+                  startup="lazy"
+                  class="solr.extraction.ExtractingRequestHandler" >
+    <lst name="defaults">
+      <!-- All the main content goes into "text"... if you need to return
+           the extracted text or do highlighting, use a stored field. -->
+      <str name="fmap.content">text</str>
+      <str name="lowernames">true</str>
+      <str name="uprefix">ignored_</str>
+
+      <!-- capture link hrefs but ignore div attributes -->
+      <str name="captureAttr">true</str>
+      <str name="fmap.a">links</str>
+      <str name="fmap.div">ignored_</str>
+    </lst>
+  </requestHandler>
+
+  <!-- Field Analysis Request Handler
+
+       RequestHandler that provides much the same functionality as
+       analysis.jsp. Provides the ability to specify multiple field
+       types and field names in the same request and outputs
+       index-time and query-time analysis for each of them.
+
+       Request parameters are:
+       analysis.fieldname - field name whose analyzers are to be used
+
+       analysis.fieldtype - field type whose analyzers are to be used
+       analysis.fieldvalue - text for index-time analysis
+       q (or analysis.q) - text for query time analysis
+       analysis.showmatch (true|false) - When set to true and when
+           query analysis is performed, the produced tokens of the
+           field value analysis will be marked as "matched" for every
+           token that is produces by the query analysis
+   -->
+  <requestHandler name="/analysis/field" 
+                  startup="lazy"
+                  class="solr.FieldAnalysisRequestHandler" />
+
+
+  <!-- Document Analysis Handler
+
+       http://wiki.apache.org/solr/AnalysisRequestHandler
+
+       An analysis handler that provides a breakdown of the analysis
+       process of provided docuemnts. This handler expects a (single)
+       content stream with the following format:
+
+       <docs>
+         <doc>
+           <field name="id">1</field>
+           <field name="name">The Name</field>
+           <field name="text">The Text Value</field>
+         </doc>
+         <doc>...</doc>
+         <doc>...</doc>
+         ...
+       </docs>
+
+    Note: Each document must contain a field which serves as the
+    unique key. This key is used in the returned response to associate
+    an analysis breakdown to the analyzed document.
+
+    Like the FieldAnalysisRequestHandler, this handler also supports
+    query analysis by sending either an "analysis.query" or "q"
+    request parameter that holds the query text to be analyzed. It
+    also supports the "analysis.showmatch" parameter which when set to
+    true, all field tokens that match the query tokens will be marked
+    as a "match". 
+  -->
+  <requestHandler name="/analysis/document" 
+                  class="solr.DocumentAnalysisRequestHandler" 
+                  startup="lazy" />
+
+  <!-- Admin Handlers
+
+       Admin Handlers - This will register all the standard admin
+       RequestHandlers.  
+    -->
+  <requestHandler name="/admin/" 
+                  class="solr.admin.AdminHandlers" />
+  <!-- This single handler is equivalent to the following... -->
+  <!--
+     <requestHandler name="/admin/luke"       class="solr.admin.LukeRequestHandler" />
+     <requestHandler name="/admin/system"     class="solr.admin.SystemInfoHandler" />
+     <requestHandler name="/admin/plugins"    class="solr.admin.PluginInfoHandler" />
+     <requestHandler name="/admin/threads"    class="solr.admin.ThreadDumpHandler" />
+     <requestHandler name="/admin/properties" class="solr.admin.PropertiesRequestHandler" />
+     <requestHandler name="/admin/file"       class="solr.admin.ShowFileRequestHandler" >
+    -->
+  <!-- If you wish to hide files under ${solr.home}/conf, explicitly
+       register the ShowFileRequestHandler using: 
+    -->
+  <!--
+     <requestHandler name="/admin/file" 
+                     class="solr.admin.ShowFileRequestHandler" >
+       <lst name="invariants">
+         <str name="hidden">synonyms.txt</str> 
+         <str name="hidden">anotherfile.txt</str> 
+       </lst>
+     </requestHandler>
+    -->
+
+  <!-- ping/healthcheck -->
+  <requestHandler name="/admin/ping" class="solr.PingRequestHandler">
+    <lst name="defaults">
+      <str name="qt">search</str>
+      <str name="q">solrpingquery</str>
+      <str name="echoParams">all</str>
+    </lst>
+  </requestHandler>
+
+  <!-- Echo the request contents back to the client -->
+  <requestHandler name="/debug/dump" class="solr.DumpRequestHandler" >
+    <lst name="defaults">
+     <str name="echoParams">explicit</str> 
+     <str name="echoHandler">true</str>
+    </lst>
+  </requestHandler>
+  
+  <!-- Solr Replication
+
+       The SolrReplicationHandler supports replicating indexes from a
+       "master" used for indexing and "salves" used for queries.
+
+       http://wiki.apache.org/solr/SolrReplication 
+
+       In the example below, remove the <lst name="master"> section if
+       this is just a slave and remove  the <lst name="slave"> section
+       if this is just a master.
+    -->
+  <!--
+     <requestHandler name="/replication" class="solr.ReplicationHandler" >
+       <lst name="master">
+         <str name="replicateAfter">commit</str>
+         <str name="replicateAfter">startup</str>
+         <str name="confFiles">schema.xml,stopwords.txt</str>
+       </lst>
+       <lst name="slave">
+         <str name="masterUrl">http://localhost:8983/solr/replication</str>
+         <str name="pollInterval">00:00:60</str>
+       </lst>
+     </requestHandler>
+    -->
+
+  <!-- Search Components
+
+       Search components are registered to SolrCore and used by 
+       instances of SearchHandler (which can access them by name)
+       
+       By default, the following components are available:
+       
+       <searchComponent name="query"     class="solr.QueryComponent" />
+       <searchComponent name="facet"     class="solr.FacetComponent" />
+       <searchComponent name="mlt"       class="solr.MoreLikeThisComponent" />
+       <searchComponent name="highlight" class="solr.HighlightComponent" />
+       <searchComponent name="stats"     class="solr.StatsComponent" />
+       <searchComponent name="debug"     class="solr.DebugComponent" />
+   
+       Default configuration in a requestHandler would look like:
+
+       <arr name="components">
+         <str>query</str>
+         <str>facet</str>
+         <str>mlt</str>
+         <str>highlight</str>
+         <str>stats</str>
+         <str>debug</str>
+       </arr>
+
+       If you register a searchComponent to one of the standard names, 
+       that will be used instead of the default.
+
+       To insert components before or after the 'standard' components, use:
+    
+       <arr name="first-components">
+         <str>myFirstComponentName</str>
+       </arr>
+    
+       <arr name="last-components">
+         <str>myLastComponentName</str>
+       </arr>
+
+       NOTE: The component registered with the name "debug" will
+       always be executed after the "last-components" 
+       
+     -->
+
+   <!-- Spell Check
+
+        The spell check component can return a list of alternative spelling
+        suggestions.  
+
+        http://wiki.apache.org/solr/SpellCheckComponent
+     -->
+  <searchComponent name="spellcheck" class="solr.SpellCheckComponent">
+
+    <str name="queryAnalyzerFieldType">textSpell</str>
+
+    <!-- Multiple "Spell Checkers" can be declared and used by this
+         component
+      -->
+
+    <!-- a spellchecker built from a field of the main index, and
+         written to disk
+      -->
+    <lst name="spellchecker">
+      <str name="name">default</str>
+      <str name="field">name</str>
+      <str name="spellcheckIndexDir">spellchecker</str>
+      <!-- uncomment this to require terms to occur in 1% of the documents in order to be included in the dictionary
+      	<float name="thresholdTokenFrequency">.01</float>
+      -->
+    </lst>
+
+    <!-- a spellchecker that uses a different distance measure -->
+    <!--
+       <lst name="spellchecker">
+         <str name="name">jarowinkler</str>
+         <str name="field">spell</str>
+         <str name="distanceMeasure">
+           org.apache.lucene.search.spell.JaroWinklerDistance
+         </str>
+         <str name="spellcheckIndexDir">spellcheckerJaro</str>
+       </lst>
+     -->
+
+    <!-- a spellchecker that use an alternate comparator 
+
+         comparatorClass be one of:
+          1. score (default)
+          2. freq (Frequency first, then score)
+          3. A fully qualified class name
+      -->
+    <!--
+       <lst name="spellchecker">
+         <str name="name">freq</str>
+         <str name="field">lowerfilt</str>
+         <str name="spellcheckIndexDir">spellcheckerFreq</str>
+         <str name="comparatorClass">freq</str>
+         <str name="buildOnCommit">true</str>
+      -->
+
+    <!-- A spellchecker that reads the list of words from a file -->
+    <!--
+       <lst name="spellchecker">
+         <str name="classname">solr.FileBasedSpellChecker</str>
+         <str name="name">file</str>
+         <str name="sourceLocation">spellings.txt</str>
+         <str name="characterEncoding">UTF-8</str>
+         <str name="spellcheckIndexDir">spellcheckerFile</str>
+       </lst>
+      -->
+  </searchComponent>
+
+  <!-- A request handler for demonstrating the spellcheck component.  
+
+       NOTE: This is purely as an example.  The whole purpose of the
+       SpellCheckComponent is to hook it into the request handler that
+       handles your normal user queries so that a separate request is
+       not needed to get suggestions.
+
+       IN OTHER WORDS, THERE IS REALLY GOOD CHANCE THE SETUP BELOW IS
+       NOT WHAT YOU WANT FOR YOUR PRODUCTION SYSTEM!
+       
+       See http://wiki.apache.org/solr/SpellCheckComponent for details
+       on the request parameters.
+    -->
+  <requestHandler name="/spell" class="solr.SearchHandler" startup="lazy">
+    <lst name="defaults">
+      <str name="spellcheck.onlyMorePopular">false</str>
+      <str name="spellcheck.extendedResults">false</str>
+      <str name="spellcheck.count">1</str>
+    </lst>
+    <arr name="last-components">
+      <str>spellcheck</str>
+    </arr>
+  </requestHandler>
+
+  <!-- Term Vector Component
+
+       http://wiki.apache.org/solr/TermVectorComponent
+    -->
+  <searchComponent name="tvComponent" class="solr.TermVectorComponent"/>
+
+  <!-- A request handler for demonstrating the term vector component
+
+       This is purely as an example.
+
+       In reality you will likely want to add the component to your 
+       already specified request handlers. 
+    -->
+  <requestHandler name="tvrh" class="solr.SearchHandler" startup="lazy">
+    <lst name="defaults">
+      <bool name="tv">true</bool>
+    </lst>
+    <arr name="last-components">
+      <str>tvComponent</str>
+    </arr>
+  </requestHandler>
+
+  <!-- Clustering Component
+
+       http://wiki.apache.org/solr/ClusteringComponent
+
+       This relies on third party jars which are notincluded in the
+       release.  To use this component (and the "/clustering" handler)
+       Those jars will need to be downloaded, and you'll need to set
+       the solr.cluster.enabled system property when running solr...
+
+          java -Dsolr.clustering.enabled=true -jar start.jar
+    -->
+  <searchComponent name="clustering" 
+                   enable="${solr.clustering.enabled:false}"
+                   class="solr.clustering.ClusteringComponent" >
+    <!-- Declare an engine -->
+    <lst name="engine">
+      <!-- The name, only one can be named "default" -->
+      <str name="name">default</str>
+
+      <!-- Class name of Carrot2 clustering algorithm. 
+           
+           Currently available algorithms are:
+           
+           * org.carrot2.clustering.lingo.LingoClusteringAlgorithm
+           * org.carrot2.clustering.stc.STCClusteringAlgorithm
+           * org.carrot2.clustering.kmeans.BisectingKMeansClusteringAlgorithm
+           
+           See http://project.carrot2.org/algorithms.html for the
+           algorithm's characteristics.
+        -->
+      <str name="carrot.algorithm">org.carrot2.clustering.lingo.LingoClusteringAlgorithm</str>
+
+      <!-- Overriding values for Carrot2 default algorithm attributes.
+
+           For a description of all available attributes, see:
+           http://download.carrot2.org/stable/manual/#chapter.components.
+           Use attribute key as name attribute of str elements
+           below. These can be further overridden for individual
+           requests by specifying attribute key as request parameter
+           name and attribute value as parameter value.
+        -->
+      <str name="LingoClusteringAlgorithm.desiredClusterCountBase">20</str>
+      
+      <!-- Location of Carrot2 lexical resources.
+
+           A directory from which to load Carrot2-specific stop words
+           and stop labels. Absolute or relative to Solr config directory.
+           If a specific resource (e.g. stopwords.en) is present in the
+           specified dir, it will completely override the corresponding
+           default one that ships with Carrot2.
+
+           For an overview of Carrot2 lexical resources, see:
+           http://download.carrot2.org/head/manual/#chapter.lexical-resources
+        -->
+      <str name="carrot.lexicalResourcesDir">clustering/carrot2</str>
+
+      <!-- The language to assume for the documents.
+           
+           For a list of allowed values, see:
+           http://download.carrot2.org/stable/manual/#section.attribute.lingo.MultilingualClustering.defaultLanguage
+       -->
+      <str name="MultilingualClustering.defaultLanguage">ENGLISH</str>
+    </lst>
+    <lst name="engine">
+      <str name="name">stc</str>
+      <str name="carrot.algorithm">org.carrot2.clustering.stc.STCClusteringAlgorithm</str>
+    </lst>
+  </searchComponent>
+
+  <!-- A request handler for demonstrating the clustering component
+
+       This is purely as an example.
+
+       In reality you will likely want to add the component to your 
+       already specified request handlers. 
+    -->
+  <requestHandler name="/clustering"
+                  startup="lazy"
+                  enable="${solr.clustering.enabled:false}"
+                  class="solr.SearchHandler">
+    <lst name="defaults">
+      <bool name="clustering">true</bool>
+      <str name="clustering.engine">default</str>
+      <bool name="clustering.results">true</bool>
+      <!-- The title field -->
+      <str name="carrot.title">name</str>
+      <str name="carrot.url">id</str>
+      <!-- The field to cluster on -->
+       <str name="carrot.snippet">features</str>
+       <!-- produce summaries -->
+       <bool name="carrot.produceSummary">true</bool>
+       <!-- the maximum number of labels per cluster -->
+       <!--<int name="carrot.numDescriptions">5</int>-->
+       <!-- produce sub clusters -->
+       <bool name="carrot.outputSubClusters">false</bool>
+       
+       <str name="defType">edismax</str>
+       <str name="qf">
+          text^0.5 features^1.0 name^1.2 sku^1.5 id^10.0 manu^1.1 cat^1.4
+       </str>
+       <str name="q.alt">*:*</str>
+       <str name="rows">10</str>
+       <str name="fl">*,score</str>
+    </lst>     
+    <arr name="last-components">
+      <str>clustering</str>
+    </arr>
+  </requestHandler>
+  
+  <!-- Terms Component
+
+       http://wiki.apache.org/solr/TermsComponent
+
+       A component to return terms and document frequency of those
+       terms
+    -->
+  <searchComponent name="terms" class="solr.TermsComponent"/>
+
+  <!-- A request handler for demonstrating the terms component -->
+  <requestHandler name="/terms" class="solr.SearchHandler" startup="lazy">
+     <lst name="defaults">
+      <bool name="terms">true</bool>
+    </lst>     
+    <arr name="components">
+      <str>terms</str>
+    </arr>
+  </requestHandler>
+
+
+  <!-- Query Elevation Component
+
+       http://wiki.apache.org/solr/QueryElevationComponent
+
+       a search component that enables you to configure the top
+       results for a given query regardless of the normal lucene
+       scoring.
+    -->
+<!--
+  <searchComponent name="elevator" class="solr.QueryElevationComponent" >
+-->
+    <!-- pick a fieldType to analyze queries -->
+
+<!--
+    <str name="queryFieldType">string</str>
+    <str name="config-file">elevate.xml</str>
+  </searchComponent>
+-->
+  <!-- A request handler for demonstrating the elevator component -->
+<!--
+  <requestHandler name="/elevate" class="solr.SearchHandler" startup="lazy">
+    <lst name="defaults">
+      <str name="echoParams">explicit</str>
+    </lst>
+    <arr name="last-components">
+      <str>elevator</str>
+    </arr>
+  </requestHandler>
+-->
+  <!-- Highlighting Component
+
+       http://wiki.apache.org/solr/HighlightingParameters
+    -->
+  <searchComponent class="solr.HighlightComponent" name="highlight">
+    <highlighting>
+      <!-- Configure the standard fragmenter -->
+      <!-- This could most likely be commented out in the "default" case -->
+      <fragmenter name="gap" 
+                  default="true"
+                  class="solr.highlight.GapFragmenter">
+        <lst name="defaults">
+          <int name="hl.fragsize">100</int>
+        </lst>
+      </fragmenter>
+
+      <!-- A regular-expression-based fragmenter 
+           (for sentence extraction) 
+        -->
+      <fragmenter name="regex" 
+                  class="solr.highlight.RegexFragmenter">
+        <lst name="defaults">
+          <!-- slightly smaller fragsizes work better because of slop -->
+          <int name="hl.fragsize">70</int>
+          <!-- allow 50% slop on fragment sizes -->
+          <float name="hl.regex.slop">0.5</float>
+          <!-- a basic sentence pattern -->
+          <str name="hl.regex.pattern">[-\w ,/\n\&quot;&apos;]{20,200}</str>
+        </lst>
+      </fragmenter>
+
+      <!-- Configure the standard formatter -->
+      <formatter name="html" 
+                 default="true"
+                 class="solr.highlight.HtmlFormatter">
+        <lst name="defaults">
+          <str name="hl.simple.pre"><![CDATA[<em>]]></str>
+          <str name="hl.simple.post"><![CDATA[</em>]]></str>
+        </lst>
+      </formatter>
+
+      <!-- Configure the standard encoder -->
+      <encoder name="html" 
+               class="solr.highlight.HtmlEncoder" />
+
+      <!-- Configure the standard fragListBuilder -->
+      <fragListBuilder name="simple" 
+                       default="true"
+                       class="solr.highlight.SimpleFragListBuilder"/>
+
+      <!-- Configure the single fragListBuilder -->
+      <fragListBuilder name="single" 
+                       class="solr.highlight.SingleFragListBuilder"/>
+
+      <!-- default tag FragmentsBuilder -->
+      <fragmentsBuilder name="default" 
+                        default="true"
+                        class="solr.highlight.ScoreOrderFragmentsBuilder">
+        <!-- 
+        <lst name="defaults">
+          <str name="hl.multiValuedSeparatorChar">/</str>
+        </lst>
+        -->
+      </fragmentsBuilder>
+
+      <!-- multi-colored tag FragmentsBuilder -->
+      <fragmentsBuilder name="colored" 
+                        class="solr.highlight.ScoreOrderFragmentsBuilder">
+        <lst name="defaults">
+          <str name="hl.tag.pre"><![CDATA[
+               <b style="background:yellow">,<b style="background:lawgreen">,
+               <b style="background:aquamarine">,<b style="background:magenta">,
+               <b style="background:palegreen">,<b style="background:coral">,
+               <b style="background:wheat">,<b style="background:khaki">,
+               <b style="background:lime">,<b style="background:deepskyblue">]]></str>
+          <str name="hl.tag.post"><![CDATA[</b>]]></str>
+        </lst>
+      </fragmentsBuilder>
+    </highlighting>
+  </searchComponent>
+
+  <!-- Update Processors
+
+       Chains of Update Processor Factories for dealing with Update
+       Requests can be declared, and then used by name in Update
+       Request Processors
+
+       http://wiki.apache.org/solr/UpdateRequestProcessor
+
+    --> 
+  <!-- Deduplication
+
+       An example dedup update processor that creates the "id" field
+       on the fly based on the hash code of some other fields.  This
+       example has overwriteDupes set to false since we are using the
+       id field as the signatureField and Solr will maintain
+       uniqueness based on that anyway.  
+       
+    -->
+  <!--
+     <updateRequestProcessorChain name="dedupe">
+       <processor class="solr.processor.SignatureUpdateProcessorFactory">
+         <bool name="enabled">true</bool>
+         <str name="signatureField">id</str>
+         <bool name="overwriteDupes">false</bool>
+         <str name="fields">name,features,cat</str>
+         <str name="signatureClass">solr.processor.Lookup3Signature</str>
+       </processor>
+       <processor class="solr.LogUpdateProcessorFactory" />
+       <processor class="solr.RunUpdateProcessorFactory" />
+     </updateRequestProcessorChain>
+    -->
+
+  <!-- Response Writers
+
+       http://wiki.apache.org/solr/QueryResponseWriter
+
+       Request responses will be written using the writer specified by
+       the 'wt' request parameter matching the name of a registered
+       writer.
+
+       The "default" writer is the default and will be used if 'wt' is
+       not specified in the request.
+    -->
+  <!-- The following response writers are implicitly configured unless
+       overridden...
+    -->
+  <!--
+     <queryResponseWriter name="xml" 
+                          default="true"
+                          class="solr.XMLResponseWriter" />
+     <queryResponseWriter name="json" class="solr.JSONResponseWriter"/>
+     <queryResponseWriter name="python" class="solr.PythonResponseWriter"/>
+     <queryResponseWriter name="ruby" class="solr.RubyResponseWriter"/>
+     <queryResponseWriter name="php" class="solr.PHPResponseWriter"/>
+     <queryResponseWriter name="phps" class="solr.PHPSerializedResponseWriter"/>
+     <queryResponseWriter name="velocity" class="solr.VelocityResponseWriter"/>
+     <queryResponseWriter name="csv" class="solr.CSVResponseWriter"/>
+    -->
+  <!--
+     Custom response writers can be declared as needed...
+    -->
+  <!--
+     <queryResponseWriter name="custom" class="com.example.MyResponseWriter"/>
+    -->
+
+  <!-- XSLT response writer transforms the XML output by any xslt file found
+       in Solr's conf/xslt directory.  Changes to xslt files are checked for
+       every xsltCacheLifetimeSeconds.  
+    -->
+  <queryResponseWriter name="xslt" class="solr.XSLTResponseWriter">
+    <int name="xsltCacheLifetimeSeconds">5</int>
+  </queryResponseWriter>
+
+  <!-- Query Parsers
+
+       http://wiki.apache.org/solr/SolrQuerySyntax
+
+       Multiple QParserPlugins can be registered by name, and then
+       used in either the "defType" param for the QueryComponent (used
+       by SearchHandler) or in LocalParams
+    -->
+  <!-- example of registering a query parser -->
+  <!--
+     <queryParser name="myparser" class="com.mycompany.MyQParserPlugin"/>
+    -->
+
+  <!-- Function Parsers
+
+       http://wiki.apache.org/solr/FunctionQuery
+
+       Multiple ValueSourceParsers can be registered by name, and then
+       used as function names when using the "func" QParser.
+    -->
+  <!-- example of registering a custom function parser  -->
+  <!--
+     <valueSourceParser name="myfunc" 
+                        class="com.mycompany.MyValueSourceParser" />
+    -->
+
+  <!-- Legacy config for the admin interface -->
+  <admin>
+    <defaultQuery>*:*</defaultQuery>
+
+    <!-- configure a healthcheck file for servers behind a
+         loadbalancer 
+      -->
+    <!--
+       <healthcheck type="file">server-enabled</healthcheck>
+      -->
+  </admin>
+
+</config>
Index: /gs3-extensions/solr/trunk/src/collect/solr-jdbm-demo/etc/conf/stopwords.txt
===================================================================
--- /gs3-extensions/solr/trunk/src/collect/solr-jdbm-demo/etc/conf/stopwords.txt	(revision 27850)
+++ /gs3-extensions/solr/trunk/src/collect/solr-jdbm-demo/etc/conf/stopwords.txt	(revision 27850)
@@ -0,0 +1,14 @@
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements.  See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License.  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
Index: /gs3-extensions/solr/trunk/src/collect/solr-jdbm-demo/etc/conf/stopwords_en.txt
===================================================================
--- /gs3-extensions/solr/trunk/src/collect/solr-jdbm-demo/etc/conf/stopwords_en.txt	(revision 27850)
+++ /gs3-extensions/solr/trunk/src/collect/solr-jdbm-demo/etc/conf/stopwords_en.txt	(revision 27850)
@@ -0,0 +1,54 @@
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements.  See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License.  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# a couple of test stopwords to test that the words are really being
+# configured from this file:
+stopworda
+stopwordb
+
+# Standard english stop words taken from Lucene's StopAnalyzer
+a
+an
+and
+are
+as
+at
+be
+but
+by
+for
+if
+in
+into
+is
+it
+no
+not
+of
+on
+or
+such
+that
+the
+their
+then
+there
+these
+they
+this
+to
+was
+will
+with
Index: /gs3-extensions/solr/trunk/src/collect/solr-jdbm-demo/etc/conf/synonyms.txt
===================================================================
--- /gs3-extensions/solr/trunk/src/collect/solr-jdbm-demo/etc/conf/synonyms.txt	(revision 27850)
+++ /gs3-extensions/solr/trunk/src/collect/solr-jdbm-demo/etc/conf/synonyms.txt	(revision 27850)
@@ -0,0 +1,29 @@
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License.  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#-----------------------------------------------------------------------
+#some test synonym mappings unlikely to appear in real input text
+aaafoo => aaabar
+bbbfoo => bbbfoo bbbbar
+cccfoo => cccbar cccbaz
+fooaaa,baraaa,bazaaa
+
+# Some synonym groups specific to this example
+GB,gib,gigabyte,gigabytes
+MB,mib,megabyte,megabytes
+Television, Televisions, TV, TVs
+#notice we use "gib" instead of "GiB" so any WordDelimiterFilter coming
+#after us won't split it into two words.
+
+# Synonym mappings can be used for spelling correction too
+pixima => pixma
+
