source: gsdl/trunk/GSI-Makefile@ 18756

Last change on this file since 18756 was 18756, checked in by ak19, 12 years ago
  1. The make target configure-cgi does not overwrite gsdlsite.cfg if it has already been generated from the .in file and prints a message in this case. 2. apache's httpd.conf is now located in the OS-specific folder.
File size: 4.6 KB
Line 
1###########################################################################
2#
3# GSI-Makefile -- Greenstone Server Interface makefile
4# A component of the Greenstone digital library software
5# from the New Zealand Digital Library Project at the
6# University of Waikato, New Zealand.
7#
8# Copyright (C) 1999 The New Zealand Digital Library Project
9#
10#
11# This program is free software; you can redistribute it and/or modify
12# it under the terms of the GNU General Public License as published by
13# the Free Software Foundation; either version 2 of the License, or
14# (at your option) any later version.
15#
16# This program is distributed in the hope that it will be useful,
17# but WITHOUT ANY WARRANTY; without even the implied warranty of
18# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19# GNU General Public License for more details.
20#
21# You should have received a copy of the GNU General Public License
22# along with this program; if not, write to the Free Software
23# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24#
25###########################################################################
26
27test-gsdlhome:
28 @ if test -z "${GSDLHOME}" ; then \
29 echo "" ; \
30 echo "Environment variable GSDLHOME not set." ; \
31 echo " This needs to be set to run this Makefile target." ; \
32 echo " Have you run 'source setup.bash'?" ; \
33 echo "" ; \
34 exit 1; \
35 else \
36 echo "Using: " ; \
37 echo " GSDLHOME = ${GSDLHOME}" ; \
38 echo " GSDLOS = ${GSDLOS}" ; \
39 fi
40
41configure-cgi: test-gsdlhome
42 @ if test ! -e ${GSDLHOME}/cgi-bin/gsdlsite.cfg ; then \
43 echo "Configuring cgi-bin/gsdlsite.cfg" ; \
44 sed "s@\*\*GSDLHOME\*\*@${GSDLHOME}@g" cgi-bin/gsdlsite.cfg.in > cgi-bin/gsdlsite.cfg ; \
45 else \
46 echo "WARNING: Nothing done for make configure-cgi." ; \
47 echo " If you wish to regenerate the file " ; \
48 echo " ${GSDLHOME}/cgi-bin/gsdlsite.cfg" ; \
49 echo " from scratch, delete the existing file first." ; \
50 fi
51
52configure-admin: test-gsdlhome
53 @echo "" ;
54 @echo "Configuring admin user password:" ;
55 @ (encrypted_password=`getpw` ; \
56 if [ $$? = "0" ] ; then \
57 echo -e "[admin]\n<enabled>true\n<groups>administrator,colbuilder,all-collections-editor\n<password>$$encrypted_password\n<username>admin" \
58 | txt2db -append "${GSDLHOME}/etc/users.db" ; \
59 else \
60 echo "Did not set password" ; \
61 fi)
62 @echo ""
63
64configure-port: test-gsdlhome
65 @ echo "Enter port number to use:"
66 @ ( read port ; \
67 if test ! -z $$port ; then \
68 echo "Port: $$port" ; \
69 echo "Stopping web server (if running)" ; \
70 make -f GSI-Makefile web-stop-tested ; \
71 echo "Setting config file to use port $$port"; \
72 cat "${GSDLHOME}/apache-httpd/${GSDLOS}/conf/httpd.conf.in" \
73 | sed "s@\*\*PORT\*\*@$$port@g" \
74 | sed "s@\*\*GSDLHOME\*\*@${GSDLHOME}@g" \
75 > "${GSDLHOME}/apache-httpd/${GSDLOS}/conf/httpd.conf" ; \
76 if test -e Makefile ; then \
77 echo "Type 'make web-start' to start the web server running on port $$port" ; \
78 else \
79 echo "Type 'make -f GSI-Makefile web-start' to start the web server running on port $$port" ; \
80 fi ; \
81 fi ; \
82 echo "Done" ; )
83
84
85
86MONITOR_SUCCESS="MAKE SUCCESSFUL"
87MONITOR_FAILED="MAKE FAILED"
88MONITOR_FINISHED="MAKE DONE"
89
90configure-apache: test-gsdlhome
91 @ echo "Configuring the apache webserver..." ;
92 @ ( port=`egrep "^apache.port" ${GSDLHOME}/lib/java/build.properties | awk -F= '{print $$2}'` ; \
93 echo $$port | make -f GSI-Makefile configure-port ; )
94 @ if test -e "${GSDLHOME}/apache-httpd/${GSDLOS}/conf/httpd.conf" ; then \
95 echo $(MONITOR_SUCCESS); \
96 else \
97 echo $(MONITOR_FAILED); \
98 fi
99 @ echo $(MONITOR_FINISHED)
100
101
102configure-web: configure-cgi configure-apache
103
104web-status: test-gsdlhome
105 ${GSDLHOME}/apache-httpd/${GSDLOS}/bin/apachectl status
106
107web-start: test-gsdlhome
108 ${GSDLHOME}/apache-httpd/${GSDLOS}/bin/apachectl start
109 @ echo $(MONITOR_SUCCESS)
110 @ echo $(MONITOR_FINISHED)
111
112web-restart: test-gsdlhome
113 ${GSDLHOME}/apache-httpd/${GSDLOS}/bin/apachectl restart
114 @ echo $(MONITOR_SUCCESS)
115 @ echo $(MONITOR_FINISHED)
116
117web-graceful: test-gsdlhome
118 ${GSDLHOME}/apache-httpd/${GSDLOS}/bin/apachectl graceful
119 @ echo $(MONITOR_SUCCESS)
120 @ echo $(MONITOR_FINISHED)
121
122web-stop-tested:
123 @# This version runs without testing for GSDLHOME
124 @# Useful to be run as a target when we know test-gsdlhome has already
125 @# been done. This avoids a unnecessary repetition of printing
126 @# out the values of GSDLHOME and GSDLOS
127 @ if test -e "${GSDLHOME}/apache-httpd/${GSDLOS}/conf/httpd.conf" ; then \
128 ${GSDLHOME}/apache-httpd/${GSDLOS}/bin/apachectl stop ; \
129 fi
130
131web-stop: test-gsdlhome web-stop-tested
132 @ echo $(MONITOR_SUCCESS)
133 @ echo $(MONITOR_FINISHED)
Note: See TracBrowser for help on using the repository browser.