source: gsdl/trunk/gsicontrol.bat@ 20907

@echo off

setlocal
::set testdone=0
set target=%1
set configfile=%2
:: remove any quotes around configfile, if we were given parameter configfile
:: To test for the existence of a cmdline parameter: http://ss64.com/nt/if.html
if not [%2] == [] set configfile=%configfile:"=%

:: Construct the signal using the unique GS2 installation
:: directory (after replacing spaces, colons and backslashes)
set signal=%GSDLHOME: =_%
for /F "delims=*" %%T in ('"echo %signal%| bin\windows\sed.exe s@[\\:]@_@g"') do set signal=%%T
set GS2_APACHE_HTTPD_SIGNAL=GS2_APACHE_HTTPD_%signal%
set signal=
rem echo Signal is: %GS2_APACHE_HTTPD_SIGNAL%

:: Need to get greenstone installation directory
:: set cwd=%CD%

set MONITOR_SUCCESS=MAKE SUCCESSFUL
set MONITOR_FAILED=MAKE FAILED
set MONITOR_FINISHED=MAKE DONE

:: check that we have >=1 and <=2 arguments
:chkargs
if "%target%" == "" goto usage
if not "%3" == "" goto usage
    goto begincmd


:usage
echo.
echo    Usage: %0 command
echo           where command is any of the following: 
echo    web-start
echo    web-stop
echo    web-restart
::echo    web-status
::echo    web-graceful
echo    configure-admin
echo    configure-web    [config-filename]
echo    configure-apache [config-filename]
echo    configure-cgi
echo    set-port
echo    test-gsdlhome
echo    web-stop-tested
echo.
goto exit


:begincmd
:: web-stop-tested command assumes GSDLHOME/greenstone environment is already set
if "%target%" == "web-stop-tested" goto stoptest

:: For all other commands, the greenstone environment needs to be set first before they can be run
:testgsdl
if NOT "%GSDLHOME%" == "" if NOT "%GSDLOS%" == "" goto commands
echo.
echo Environment variable GSDLHOME (or GSDLOS) not set.
echo   This needs to be set to run the gsicontrol command %target%.
echo   Have you run setup.bat?
echo.
goto exit


::MAIN MENU
:commands
echo. 
echo Using:
echo   GSDLHOME = %GSDLHOME%
echo   GSDLOS = %GSDLOS%
echo.

if "%target%" == "web-start" goto start
if "%target%" == "web-stop" goto stop
if "%target%" == "web-restart" goto restart
if "%target%" == "configure-admin" goto cfgadmin
if "%target%" == "configure-web" goto cfgweb
if "%target%" == "configure-apache" goto cfgapach
if "%target%" == "configure-cgi" goto cfgcgi
:: already tested gsdlhome (and web-stop-tested) above, don't want to keep looping on it
if "%target%" == "test-gsdlhome" goto exit
rem if "%target%" == "web-stop-tested" goto exit
rem if "%target%" == "web-status" goto status
rem if "%target%" == "web-graceful" goto graceful
if "%target%" == "set-port" goto setport
:: unknown command
echo Command unrecognised: %target%
goto usage


:start
:: START starts the app in a new console named by the string following immediately thereafter
:: then we start up apache-httpd and pass the signal that the stop command will respond to
START "%GSDLHOME%\apachectl" "%GSDLHOME%\bin\windows\starthttpd.exe" %GS2_APACHE_HTTPD_SIGNAL% "%GSDLHOME%\apache-httpd\windows\bin\httpd.exe"
:: if the return value is >= 0, it's succeeded:
if ERRORLEVEL 0 (echo %MONITOR_SUCCESS%) else (echo %MONITOR_FAILED%)
echo %MONITOR_FINISHED%
goto exit

:stop
:stoptest
if exist "%GSDLHOME%\apache-httpd\%GSDLOS%\conf\httpd.conf" "%GSDLHOME%\bin\windows\stophttpd.exe" %GS2_APACHE_HTTPD_SIGNAL% SILENT
if "%target%" == "web-stop-tested" goto exit
:: if the return value is >= 0, it's succeeded:
if ERRORLEVEL 0 (echo %MONITOR_SUCCESS%) else (echo %MONITOR_FAILED%)
echo %MONITOR_FINISHED%
goto exit


:restart
:: Need to stop server, wait and start it again.
:: We're using Ping to implement batch file Wait
if exist "%GSDLHOME%\apache-httpd\%GSDLOS%\conf\httpd.conf" "%GSDLHOME%\bin\windows\stophttpd.exe" %GS2_APACHE_HTTPD_SIGNAL%

:: Wait 5 seconds and then start. See http://ss64.com/nt/sleep.html (and http://malektips.com/dos0017.html)
:: if loopback IP address (127.0.0.1) does not exist, we ask them to manually start it up again
ping -n 1 -w 1000 127.0.0.1 |find "TTL=">nul || goto failmsg
echo Waiting for re-start....
ping -n 5 -w 1000 127.0.0.1> nul
goto start

:failmsg
echo Unable to wait for restart. Manually run %0 web-start
goto exit


::status
::graceful
::echo Command %target% is not operational on this operating system
::goto exit


::configure-admin
:cfgadmin
echo.
echo Configuring admin user password:
for /F %%T in ('getpw') do set encrypted_password=%%T

:: Have to create an intermediate file in the following, because echoing
:: lines straight into a pipe adds spaces before the end of each line.
:: When piping, need to double-escape the angle brackets with three hat signs,
:: but when redirecting to a file, need to escape only once (one hat sign). 
if ERRORLEVEL 0 (
    (
    echo [admin]
    echo ^<enabled^>true
    echo ^<groups^>administrator,colbuilder,all-collections-editor
    echo ^<password^>%encrypted_password%
    echo ^<username^>admin
    ) > "%GSDLHOME%\etc\users.txt"
    type "%GSDLHOME%\etc\users.txt" | txt2db -append "%GSDLHOME%\etc\users.gdb"
    del "%GSDLHOME%\etc\users.txt"  
) else (
    echo Did not set password 
)
echo.
goto exit


::configure-web
::configure-cgi
:cfgweb
:cfgcgi
if exist "%GSDLHOME%\cgi-bin\gsdlsite.cfg" goto cgimsg
echo Configuring cgi-bin\gsdlsite.cfg
for /F "delims=*" %%T in ('"echo %GSDLHOME%| bin\windows\sed.exe s@\\@\\\\@g"') do set safepath=%%T
bin\windows\sed.exe "s@\*\*GSDLHOME\*\*@\"%safepath%\"@g" cgi-bin/gsdlsite.cfg.in > cgi-bin/gsdlsite.cfg    
set safepath=
goto cgifin

:cgimsg
echo WARNING: Nothing done for configure-cgi.
echo    If you wish to regenerate the file
echo    %GSDLHOME%\cgi-bin\gsdlsite.cfg
echo    from scratch, delete the existing file first.
echo.

:cgifin
if "%target%" == "configure-cgi" goto exit
if "%target%" == "configure-web" goto cfgapach

::configure-apache
:cfgapach
if not "%configfile%" == "" if exist "%configfile%" (goto cfgport) else (echo Config file %configfile% does not exist. Using default llssite.cfg)

if exist "%GSDLHOME%\llssite.cfg" (
  set configfile=%GSDLHOME%\llssite.cfg
  goto cfgport 
)
if not exist "%GSDLHOME%\llssite.cfg.in" (
  echo Unable to proceed as neither %GSDLHOME%\llssite.cfg nor %GSDLHOME%\llssite.cfg.in could be found
  goto exit
)
copy "%GSDLHOME%\llssite.cfg.in" "%GSDLHOME%\llssite.cfg"
set configfile=%GSDLHOME%\llssite.cfg

:cfgport
echo Configuring the apache webserver...
:: See http://ss64.com/nt/for_cmd.html, http://ss64.com/nt/findstr.html (and http://ss64.com/nt/find.html)
FOR /F "tokens=2 delims==" %%G IN ('findstr /R ^portnumber "%configfile%"') do set port=%%G
FOR /F "tokens=2 delims==" %%G IN ('findstr /R ^hostIP "%configfile%"') do set hostIP=%%G
FOR /F "tokens=2 delims==" %%G IN ('findstr /R ^externalaccess "%configfile%"') do set allowfromall=%%G

if "%allowfromall%" == "1" set allowfromall="Allow"& goto portcon
set allowfromall="Deny"

:: Using CALL to jump to labels means we can return from them. BUT need to ensure
:: that command extensions are enabled to call labels. So just use GOTO instead.
::http://ss64.com/nt/call.html
goto portcon


::configure-port-and-connection
:setport
set /p port=Enter port number to use:
set /p hostIP=Enter host IP to allow (127.0.0.1 is included by default):
set /p allowfromall=Allow external connections [yes/no]:

if "%allowfromall%" == "yes" set allowfromall="Allow"& goto portcon
if "%allowfromall%" == "y" set allowfromall="Allow"& goto portcon
set allowfromall="Deny"
goto portcon

:portcon
if "%port%" == "" (
   echo Done
   goto exit
)
set _sed="bin\windows\sed.exe"
for /F "delims=*" %%T in ('"echo %GSDLHOME%| bin\windows\sed.exe s@\\@\/@g"') do set safepath=%%T

echo Port: %port%
echo Stopping web server (if running)
if not exist "%GSDLHOME%\apache-httpd\%GSDLOS%\conf\httpd.conf" echo Missing conf file
if exist "%GSDLHOME%\apache-httpd\%GSDLOS%\conf\httpd.conf" "%GSDLHOME%\bin\windows\stophttpd.exe" %GS2_APACHE_HTTPD_SIGNAL% SILENT
echo Setting config file to use port %port%
type "%GSDLHOME%\apache-httpd\%GSDLOS%\conf\httpd.conf.in" | %_sed% "s@\*\*PORT\*\*@%port%@g" | %_sed% "s@\*\*CONNECTPERMISSION\*\*@%allowfromall%@g" | %_sed% "s@\*\*HOST_IP\*\*@%hostIP%@g" | %_sed% "s@\*\*GSDLHOME\*\*@%safepath%@g" | %_sed% "s@\*\*APACHE_HOME_OS\*\*@%safepath%\/apache-httpd\/%GSDLOS%@g" > "%GSDLHOME%\apache-httpd\%GSDLOS%\conf\httpd.conf"
echo Type '%0 web-start' to start the web server running on port %port%
echo Done

set allowfromall=
set _sed=
set safepath=
set port=

:: Extra processing for configure-web and configure-cgi command targets
if not "%target%" == "configure-web" if not "%target%" == "configure-cgi" goto exit
if exist "%GSDLHOME%\apache-httpd\%GSDLOS%\conf\httpd.conf" (echo %MONITOR_SUCCESS%) else (echo %MONITOR_FAILED%)
echo %MONITOR_FINISHED%
goto exit

:exit
endlocal