source: gsdl/trunk/perllib/cgiactions/baseaction.pm@ 20820

###########################################################################
#
# baseaction.pm -- 
# A component of the Greenstone digital library software
# from the New Zealand Digital Library Project at the 
# University of Waikato, New Zealand.
#
# Copyright (C) 2009 New Zealand Digital Library Project
#
# This program is free software; you can redistr   te it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
###########################################################################


package baseaction;


use strict;

our $authenication_enabled = 0;
our $mail_enabled = 0;


# change this to get these values from a config file
my $mail_to_address = "user\@server";  # Set this appropriately
my $mail_from_address = "user\@server";  # Set this appropriately
my $mail_smtp_server = "smtp.server";  # Set this appropriately



# Required CGI arguments: "a" for action
#                         "c" for collection
# Optional CGI arguemnts: "ts" for timestamp (auto generated is missing)
#                         "site" (used by Greenstone3)

# allow "un" for username to be optional for now

sub new 
{
    my $class = shift (@_);

    my ($action_table,$gsdl_cgi,$iis6_mode) = @_;

    my $self = { 'gsdl_cgi' => $gsdl_cgi, 
         'iis6_mode' => $iis6_mode,
         'gsdlhome' => $ENV{'GSDLHOME'} };


    # Retrieve the (required) command CGI argument
    my $action = $gsdl_cgi->clean_param("a");

    if (!defined $action) {
    my $err_mess = "No action (a=...) specified.\n";
    $err_mess .= "\nPossible actions are:\n";

    $err_mess .= "  check-installation\n\n";

    foreach my $a (keys %$action_table) {
        $err_mess .= "  $a:\n";
        $err_mess .= "    Compulsory args: ";
        $err_mess .= join(", ", ("c", "un"), 
                  @{$action_table->{$a}->{'compulsory-args'}});
        $err_mess .= "\n";

        if (scalar(@{$action_table->{$a}->{'optional-args'}})>0) {

        $err_mess .= "    Optional args  : ";
        $err_mess .= join(", ", @{$action_table->{$a}->{'optional-args'}});
        $err_mess .= "\n";
        }
        $err_mess .= "\n";
    }

    $gsdl_cgi->generate_message($err_mess);
    exit(-1);
        
    }
    $gsdl_cgi->delete("a");


    # The check-installation command has no arguments
    if ($action eq "check-installation") {
    $self->check_installation($gsdl_cgi,$iis6_mode);
    return;
    }


    if (!defined $action_table->{$action}) {
    my $valid_actions = join(", ", keys %$action_table);

    my $err_mess = "Unrecognised action (a=$action) specified.\n";
    $err_mess .= "Valid actions are: $valid_actions\n";

    $gsdl_cgi->generate_error($err_mess);       
    }

    
    my $collect = $gsdl_cgi->clean_param("c");
    if ((!defined $collect) || ($collect =~ m/^\s*$/)) {
    $gsdl_cgi->generate_error("No collection specified.");
    }
    $gsdl_cgi->delete("c");

    # allow un to be optional for now
    my $username = $gsdl_cgi->clean_param("un");


    # Get then remove the ts (timestamp) argument (since this can mess up 
    #  other scripts)
    my $timestamp = $gsdl_cgi->clean_param("ts");
    if ((!defined $timestamp) || ($timestamp =~ m/^\s*$/)) {
    # Fall back to using the Perl time() function to generate a timestamp
    $timestamp = time();  
    }
    $gsdl_cgi->delete("ts");

    my $site = undef; 
    if($gsdl_cgi->greenstone_version() != 2) { 
    # all GS versions after 2 may define site
    $site = $gsdl_cgi->clean_param("site");   
    if (!defined $site) {
        $gsdl_cgi->generate_error("No site specified.");
    }
    $gsdl_cgi->delete("site");
    }
    
    $self->{'action'} = $action;
    $self->{'collect'} = $collect;
    $self->{'username'} = $username;
    $self->{'timestamp'} = $timestamp;
    $self->{'site'} = $site;

    # Locate and store compulsory arguments
    my $comp_args = $action_table->{$action}->{'compulsory-args'};
    foreach my $ca (@$comp_args) {
    if (!defined $gsdl_cgi->{$ca}) {
        $gsdl_cgi->generate_error("Compulsory argument '$ca' missing");
    }
    else {
        $self->{$ca} = $gsdl_cgi->clean_param($ca);
        $gsdl_cgi->delete($ca);
    }
    }

    # Locate and store optional args if present
    my $opt_args = $action_table->{$action}->{'optional-args'};
    foreach my $oa (@$opt_args) {
    if (defined $gsdl_cgi->{$oa}) {
        
        $self->{$oa} = $gsdl_cgi->clean_param($oa);
        $gsdl_cgi->delete($oa);
    }
    }


    return bless $self, $class;
}


sub do_action
{
    my $self = shift @_;
    my $action = $self->{'action'};

    $action =~ s/-/_/g;

    
    $self->$action();

}




sub authenticate_user
{
    my $self = shift @_;
    my $username = shift(@_);
    my $collection = shift(@_);

    my $gsdl_cgi = $self->{'gsdl_cgi'};

    # Remove the pw argument (since this can mess up other scripts)
    my $user_password = $gsdl_cgi->clean_param("pw");
    $gsdl_cgi->delete("pw");

    if ((!defined $user_password) || ($user_password =~ m/^\s*$/)) {
    $gsdl_cgi->generate_error("Authentication failed: no password specified.");
    }

    my $gsdlhome = $ENV{'GSDLHOME'};
    my $etc_directory = &util::filename_cat($gsdlhome, "etc");
    my $users_db_file_path = &util::filename_cat($etc_directory, "users.db");

    # Use db2txt instead of GDBM_File to get the user accounts information
    my $users_db_content = "";
    open(USERS_DB, "db2txt \"$users_db_file_path\" |");
    while (<USERS_DB>) {
    $users_db_content .= $_;
    }

    # Get the user account information from the users.db database
    my %users_db_data = ();
    foreach my $users_db_entry (split(/-{70}/, $users_db_content)) {
    if ($users_db_entry =~ /\n?\[(.+)\]\n/) {
        $users_db_data{$1} = $users_db_entry;
    }
    }

    # Check username
    my $user_data = $users_db_data{$username};
    if (!defined $user_data) {
    $gsdl_cgi->generate_error("Authentication failed: no account for user '$username'.");
    }

    # Check password
    my ($valid_user_password) = ($user_data =~ /\<password\>(.*)/);
    if ($user_password ne $valid_user_password) {
    $gsdl_cgi->generate_error("Authentication failed: incorrect password.");
    }

    # Check group
    my ($user_groups) = ($user_data =~ /\<groups\>(.*)/);
    if ($collection eq "") {
    # If we're not editing a collection then the user doesn't need to be in a particular group
    return $user_groups;  # Authentication successful
    }
    foreach my $user_group (split(/\,/, $user_groups)) {
    # Does this user have access to all collections?
    if ($user_group eq "all-collections-editor") {
        return $user_groups;  # Authentication successful
    }
    # Does this user have access to personal collections, and is this one?
    if ($user_group eq "personal-collections-editor" && $collection =~ /^$username\-/) {
        return $user_groups;  # Authentication successful
    }
    # Does this user have access to this collection
    if ($user_group eq "$collection-collection-editor") {
        return $user_groups;  # Authentication successful
    }
    }

    $gsdl_cgi->generate_error("Authentication failed: user is not in the required group.");
}



sub check_installation
{
    my $self = shift @_;
    my $iis6_mode = shift(@_);

    my $gsdl_cgi = $self->{'gsdl_cgi'};

    my $installation_ok = 1;
    my $installation_status = "";

    print STDOUT "Content-type:text/plain\n\n";

    # Check that Java is installed and accessible
    my $java = $gsdl_cgi->get_java_path();
    my $java_command = "$java -version 2>&1";

    # IIS 6: redirecting output from STDERR to STDOUT just doesn't work, so we have to let it go
    #   directly out to the page
    if ($iis6_mode)
    {
    $java_command = "java -version";
    }

    my $java_output = `$java_command`;
    my $java_status = $?;
    if ($java_status < 0) {
    # The Java command failed
    $installation_status = "Java failed -- do you have the Java run-time installed?\n" . $gsdl_cgi->check_java_home() . "\n";
    $installation_ok = 0;
    }
    else {
    $installation_status = "Java found: $java_output";
    }

    # Show the values of some important environment variables
    $installation_status .= "\n";
    $installation_status .= "GSDLHOME: " . $ENV{'GSDLHOME'} . "\n";
    $installation_status .= "GSDLOS: " . $ENV{'GSDLOS'} . "\n";
    $installation_status .= "PATH: " . $ENV{'PATH'} . "\n";

    if ($installation_ok) {
    print STDOUT $installation_status . "\nInstallation OK!";
    }
    else {
    print STDOUT $installation_status;
    }
}

sub lock_collection
{
    my $self = shift @_;
    my $username = shift(@_);
    my $collection = shift(@_);

    my $gsdl_cgi = $self->{'gsdl_cgi'};

    my $steal_lock = $gsdl_cgi->clean_param("steal_lock");
    $gsdl_cgi->delete("steal_lock");

    if (!defined $username) {
    # don't have any user details for current user to compare with
    # even if there is a lock file
    # For now, allow the current user access.  Might want to
    # revisit this in the future.
    return;
    }

    my $gsdlhome = $ENV{'GSDLHOME'};
    my $collection_directory = &util::filename_cat($gsdlhome, "collect", $collection);
    $gsdl_cgi->checked_chdir($collection_directory);

    # Check if a lock file already exists for this collection
    my $lock_file_name = "gli.lck";
    if (-e $lock_file_name) {
    # A lock file already exists... check if it's ours
    my $lock_file_content = "";
    open(LOCK_FILE, "<$lock_file_name");
    while (<LOCK_FILE>) {
        $lock_file_content .= $_;
    }
    close(LOCK_FILE);

    # Pick out the owner of the lock file
    $lock_file_content =~ /\<User\>(.*?)\<\/User\>/;
    my $lock_file_owner = $1;

    # The lock file is ours, so there is no problem
    if ($lock_file_owner eq $username) {
        return;
    }

    # The lock file is not ours, so throw an error unless "steal_lock" is set
    unless (defined $steal_lock) {
        $gsdl_cgi->generate_error("Collection is locked by: $lock_file_owner");
    }
    }

    my ($sec, $min, $hour, $mday, $mon, $year, $wday, $yday, $isdst) = localtime(time);
    my $current_time = sprintf("%02d/%02d/%d %02d:%02d:%02d", $mday, $mon + 1, $year + 1900, $hour, $min, $sec);

    # Create a lock file for us (in the same format as the GLI) and we're done
    open(LOCK_FILE, ">$lock_file_name");
    print LOCK_FILE "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n";
    print LOCK_FILE "<LockFile>\n";
    print LOCK_FILE "    <User>" . $username . "</User>\n";
    print LOCK_FILE "    <Machine>(Remote)</Machine>\n";
    print LOCK_FILE "    <Date>" . $current_time . "</Date>\n";
    print LOCK_FILE "</LockFile>\n";
    close(LOCK_FILE);
}


sub send_mail
{
    my $self = shift @_;

    my ($mail_subject,$mail_content) = @_;

    my $gsdl_cgi = $self->{'gsdl_cgi'};

    my $sendmail_command = "perl -S sendmail.pl";
    $sendmail_command .= " -to \"" . $mail_to_address . "\"";
    $sendmail_command .= " -from \"" . $mail_from_address . "\"";
    $sendmail_command .= " -smtp \"" . $mail_smtp_server . "\"";
    $sendmail_command .= " -subject \"" . $mail_subject . "\"";

    if (!open(POUT, "| $sendmail_command")) {
    $gsdl_cgi->generate_error("Unable to execute command: $sendmail_command");
    }
    print POUT $mail_content . "\n";
    close(POUT);
}




sub run_script
{
    my $self = shift @_;

    my ($collect, $site, $script) = @_;

    my $gsdl_cgi = $self->{'gsdl_cgi'};

    my $perl_args = $collect;

    my $collect_dir = $gsdl_cgi->get_collection_dir($site); 
    $perl_args = "-collectdir \"$collect_dir\" " . $perl_args;

    my $perl_command = "perl -S $script $perl_args";


    # IIS 6: redirecting output from STDERR to STDOUT just doesn't work, so
    # we have to let it go directly out to the page

    if (!$self->{'iis6_mode'})
    {
    $perl_command .= " 2>&1";
    }

    if (!open(PIN, "$perl_command |")) {
    $gsdl_cgi->generate_error("Unable to execute command: $perl_command");
    }

    print STDOUT "Content-type:text/plain\n\n";
    print "$perl_command  \n";

    while (defined (my $perl_output_line = <PIN>)) {
    print STDOUT $perl_output_line;
    }
    close(PIN);

    my $perl_status = $?;
    if ($perl_status > 0) {
    $gsdl_cgi->generate_error("Perl failed: $perl_command\n--\nExit status: " . ($perl_status / 256));
    }
}




1;