source: gsdl/trunk/perllib/downloaders/WgetDownload.pm@ 17800

###########################################################################
#
# WgetDownload.pm -- Download base module that handles calling Wget
# A component of the Greenstone digital library software
# from the New Zealand Digital Library Project at the 
# University of Waikato, New Zealand.
#
# Copyright (C) 2006 New Zealand Digital Library Project
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
###########################################################################

package WgetDownload;

eval {require bytes};

# suppress the annoying "subroutine redefined" warning that various
# plugins cause under perl 5.6
$SIG{__WARN__} = sub {warn($_[0]) unless ($_[0] =~ /Subroutine\s+\S+\sredefined/)};

use BaseDownload;
use strict;
use Cwd;
use IPC::Open2;
use IO::Select;
use IO::Socket;


sub BEGIN {
    @WgetDownload::ISA = ('BaseDownload');
}

my $arguments = 
     [ { 'name' => "proxy_on", 
    'desc' => "{WgetDownload.proxy_on}",
    'type' => "flag",
    'reqd' => "no",
    'hiddengli' => "yes"},
      { 'name' => "proxy_host",  
    'desc' => "{WgetDownload.proxy_host}",         
    'type' => "string",
    'reqd' => "no",
    'hiddengli' => "yes"},
      { 'name' => "proxy_port", 
    'desc' => "{WgetDownload.proxy_port}",         
    'type' => "string",
    'reqd' => "no",
    'hiddengli' => "yes"},
      { 'name' => "user_name",  
    'desc' => "{WgetDownload.user_name}",         
    'type' => "string",
    'reqd' => "no",
    'hiddengli' => "yes"},
      { 'name' => "user_password", 
    'desc' => "{WgetDownload.user_password}",         
    'type' => "string",
    'reqd' => "no",
    'hiddengli' => "yes"}];

my $options = { 'name'     => "WgetDownload",
        'desc'     => "{WgetDownload.desc}",
        'abstract' => "yes",
        'inherits' => "yes",
        'args'     => $arguments };


# Declaring file global variables related to the wget child process so that 
# the termination signal handler for SIGTERM can close the streams and tidy
# up before ending the child process.
my $childpid;
my ($chld_out, $chld_in);
my ($serverSocket, $read_set);

# The port this script's server socket will be listening on, to handle 
# incoming signals from GLI to terminate wget. This is also file global, 
# since OAIDownload.pm will make several calls on wget using the same 
# instance of this script and we want to reuse whatever port GLI gave us.
my $port; 

# When this script is called from the command line, this handler will be called
# if this process is killed or abruptly ends due to receiving one of the
# terminating signals that this handler is registered to deal with.
sub abrupt_end_handler {
    my $termination_signal = shift (@_);

    if(defined $childpid) {
    close($chld_out);
    close($chld_in);
    
    print STDOUT "Received termination signal: $termination_signal\n";

    # Send TERM signal to child process to terminate it. Sending the INT signal doesn't work
    # See http://perldoc.perl.org/perlipc.html#Signals 
    # Warning on using kill at http://perldoc.perl.org/perlfork.html
    kill("TERM", $childpid); 

    # If the SIGTERM sent on Linux calls this handler, we want to make
    # sure any socket connection is closed.
    # Otherwise sockets are only used when this script is run from GLI
    # in which case the handlers don't really get called.
    if(defined $serverSocket) {
        $read_set->remove($serverSocket) if defined $read_set;
        close($serverSocket);
    }
    }

    exit(0);
}

# Registering a handler for when termination signals SIGINT and SIGTERM are received to stop
# the wget child process. SIGTERM--generated by Java's Process.destroy()--is the default kill
# signal (kill -15) on Linux, while SIGINT is generated upon Ctrl-C (also on Windows). 
# Note that SIGKILL can't be handled as the handler won't get called for it. More information: 
# http://affy.blogspot.com/p5be/ch13.htm
# http://perldoc.perl.org/perlipc.html#Signals
$SIG{'INT'} = \&abrupt_end_handler;
$SIG{'TERM'} = \&abrupt_end_handler;

sub new {
    my ($class) = shift (@_);
    my ($getlist,$inputargs,$hashArgOptLists) = @_;
    push(@$getlist, $class);

    push(@{$hashArgOptLists->{"ArgList"}},@{$arguments});
    push(@{$hashArgOptLists->{"OptList"}},$options);

    my $self = new BaseDownload($getlist,$inputargs,$hashArgOptLists);

    return bless $self, $class;
}

sub checkWgetSetup
{
    my ($self,$blnGliCall) = @_;
    #TODO: proxy detection??
    
    if((!$blnGliCall) && $self->{'proxy_on'})
    {
    &checkProxySetup($self);
    }
    &checkURL($self); 
}

sub getWgetOptions
{
    my ($self) = @_;
    my $strOptions = "";
    
    if ($self->{'proxy_on'} && $self->{'proxy_host'} && $self->{'proxy_port'})
    {

    $strOptions .= " -e httpproxy=$self->{'proxy_host'}:$self->{'proxy_port'} ";

    if ($self->{'user_name'} && $self->{'user_password'})
    {
        $strOptions .= "--proxy-user=$self->{'user_name'}"." --proxy-passwd=$self->{'user_password'}";
    }
    }

    if ($self->{'proxy_on'}) {
    $strOptions .= " --proxy ";
    }

    return $strOptions;
}

# Checking for proxy setup: proxy server, proxy port, proxy username and password.
sub checkProxySetup
{
    my ($self) = @_;
    ($self->{'proxy_on'}) || &error("checkProxySetup","The proxy is not on? How could that be happening?");
    # Setup .wgetrc by using $self->{'proxy_host'} and $self->{'proxy_port'}
    # Test if the connection is successful. If the connection wasn't successful then ask user to supply username and password.

}

# Returns true if the wget status needs to be monitored through sockets
# (if a socket is used to communicate with the Java program on when to
# terminate wget). True if we are running gli, or if the particular type
# of WgetDownload is *not* OAIDownload (in that case, the original way of 
# terminating the perl script from Java terminated wget as well).
sub dealingWithSockets() {
    my ($self) = @_;
    return (defined $self->{'gli'} && $self->{'gli'} && !defined $port && ref($self) ne "OAIDownload");
                       # use ref($self) to find the classname of an object
}

sub get_childpid {
    my ($self, $pid) = @_;
    my $os = $^O;
    # for windows, we do nothing special
    if ($os =~ m/mswin/i) {
    return $pid;
    }
    
    # else $os is macos or linux
    # This means the wget child process may have been spawned from a subshell
    # (the real child) that was launched by this perl script. However, we want
    # the pid of the wget process, since that is what we want to terminate.

    sleep(2); # give it some time to start up, else we'd have finished searching beforehand

    # Look through any processes spawned immediately/soon after the subshell.
    # Look for any pid greater than the subshell's, but within a certain limit (10)
    my $child = $pid;
    for(my $i = 1; $i <= 10; $i++) {
    $child = $child+$i;
    if(kill(0, $child)) { # this process exists
        return $child;
    }
    }
    
    return $pid; # could not find any process within limit, so return the original process id?
}

sub useWget
{
    #local $| = 1; # autoflush stdout buffer
    #print STDOUT "*** Start of subroutine useWget in $0\n";

    my ($self, $cmdWget,$blnShow, $working_dir) = @_;

    my ($strReadIn,$strLine,$command);
    $strReadIn = "" unless defined $strReadIn;

    my $current_dir = cwd();
    my $changed_dir = 0;
    if (defined $working_dir && -e $working_dir) {
    chdir "$working_dir";
    $changed_dir = 1;
    }

    # When we are running this script through GLI, the SIGTERM signal handler 
    # won't get called on Windows when wget is to be prematurely terminated. 
    # Instead, when wget has to be terminated in the middle of execution, GLI will
    # connect to a serverSocket here to communicate when it's time to stop wget.
    if($self->dealingWithSockets()) {

    $port = <STDIN>; # gets a port on localhost that's not yet in use
    chomp($port);
    
    $serverSocket = IO::Socket::INET->new( Proto     => 'tcp',
                           LocalPort => $port,
                           Listen    => 1,
                           Reuse     => 1);
    
    die "can't setup server" unless $serverSocket;
    #print STDOUT "[Serversocket $0 accepting clients at port $port]\n";

    $read_set = new IO::Select();         # create handle set for reading
    $read_set->add($serverSocket);        # add the main socket to the set
    }

    my $wget_file_path = &util::filename_cat($ENV{'GSDLHOME'}, "bin", $ENV{'GSDLOS'}, "wget");
    $command = "\"$wget_file_path\" $cmdWget 2>&1";
    # print STDERR "Command is: $command\n";
    $childpid = open2($chld_out, $chld_in, $command) || die "wget request failed: $!\n";
    
    # for linux the wget process starts off as achild of a subshell launched as the child of 
    # this perl script. We want the pid of the wget process, not that of the subshell. 
    $childpid = $self->get_childpid($childpid);

    my $loop = 1;
    while($loop)
    {
    if (defined(my $strLine=<$chld_out>)) { # we're reading in from child process' stdout
        if($blnShow) {
        print STDERR "$strLine\n";
        }
        $strReadIn .= $strLine;
    } 
    else { # wget finished, terminate naturally
        #print STDOUT "\nPerl: open2 command, input stream closed. Wget terminated naturally.\n";
        close($chld_in);
        close($chld_out);
        waitpid $childpid, 0;
        $loop = 0;
        
        $childpid = undef;
        if(defined $port) {
        $read_set->remove($serverSocket);
        close($serverSocket);
        }
    }

    # if we run this script from the command-line (as opposed to from GLI), 
    # then we're not working with sockets and can therefore can skip the next bits
    next unless(defined $port);

    # http://www.perlfect.com/articles/select.shtml
    # "multiplex between several filehandles within a single thread of control, 
    # thus creating the effect of parallelism in the handling of I/O."
    my @rh_set = $read_set->can_read(0.002); # every 2 ms check if there's a client socket connecting

    # take all readable handles in turn
    foreach my $rh (@rh_set) {
        if($rh == $serverSocket) {
        my $client = $rh->accept();
        #$client->autoflush(1); # autoflush output buffer - don't put this back in: output split irregularly over lines
        print $client "Talked to ServerSocket (port $port). Connection accepted\n";
        
        # Read from the client (getting rid of the trailing newline)
        # Has the client sent the <<STOP>> signal?
        my $signal = <$client>;
        chomp($signal); 
        if($signal eq "<<STOP>>") {
            print $client "Perl received STOP signal (on port $port): stopping wget\n";
            $loop = 0;                          # out of outer while loop
            $self->{'forced_quit'} = 1;         # subclasses need to know we're quitting
            
            # Sometimes the wget process takes some time to start up. If the STOP signal
            # was sent, don't try to terminate the process until we know it is running. 
            # Otherwise wget may start running after we tried to kill it. Wait 5 seconds
            # for it to start up, checking for whether it is running in order to kill it.
            for(my $seconds = 1; $seconds <= 5; $seconds++) {
            if(kill(0, $childpid)) { 
                # If kill(0, $childpid) returns true, then the process is running
                # and we need to kill it.
                close($chld_in);
                close($chld_out);
                kill("TERM", $childpid);
                
                $childpid = undef;
                
                # Stop monitoring the read_handle and close the serverSocket 
                # (the Java end will close the client socket that Java opened)
                $read_set->remove($rh);     #$read_set->remove($serverSocket);
                close($rh);             #close($serverSocket);
                print $client "Perl terminated wget and is about to exit\n";
            }
            else { # the process may just be starting up, wait
                sleep(1);
            }
            last;                           # out of inner for loop
            }
            last;                               # out of foreach loop
        }
        }
    }
    }

    if ($changed_dir) {
    chdir $current_dir;
    }
    
    return $strReadIn;
}


sub useWgetMonitored
{
    #local $| = 1; # autoflush stdout buffer
    #print STDOUT "*** Start of subroutine useWgetMonitored in $0\n";

    my ($self, $cmdWget,$blnShow, $working_dir) = @_;


    my $current_dir = cwd();
    my $changed_dir = 0;
    if (defined $working_dir && -e $working_dir) {
    chdir "$working_dir";
    $changed_dir = 1;
    }

    # When we are running this script through GLI, the SIGTERM signal handler 
    # won't get called on Windows when wget is to be prematurely terminated. 
    # Instead, when wget has to be terminated in the middle of execution, GLI will
    # connect to a serverSocket here to communicate when it's time to stop wget.
    if($self->dealingWithSockets()) {

    $port = <STDIN>; # gets a port on localhost that's not yet in use
    chomp($port);
    
    $serverSocket = IO::Socket::INET->new( Proto     => 'tcp',
                           LocalPort => $port,
                           Listen    => 1,
                           Reuse     => 1);
    
    die "can't setup server" unless $serverSocket;
    #print STDOUT "[Serversocket $0 accepting clients at port $port]\n";

    $read_set = new IO::Select();         # create handle set for reading
    $read_set->add($serverSocket);        # add the main socket to the set
    }

    my $wget_file_path = &util::filename_cat($ENV{'GSDLHOME'}, "bin", $ENV{'GSDLOS'}, "wget");
    #my $command = "\"$wget_file_path\" $cmdWget 2>&1 |"; #open(*WIN,$command) || die "wget request failed: $!\n";
    my $command = "\"$wget_file_path\" $cmdWget 2>&1";
    # print STDERR "Command is: $command\n";
    $childpid = open2($chld_out, $chld_in, $command) || die "wget request failed: $!\n";

    # for linux the wget process starts off as achild of a subshell launched as the child of 
    # this perl script. We want the pid of the wget process, not that of the subshell. 
    $childpid = $self->get_childpid($childpid);

    my $full_text = "";
    my $error_text = "";
    my @follow_list = ();
    my $line;

    my $loop = 1;
    while($loop)
    {
    if (defined($line=<$chld_out>)) { # we're reading in from child process' stdout
        if((defined $blnShow) && $blnShow)
        {
        print STDERR "$line";
        }
        
        if ($line =~ m/^Location:\s*(.*?)\s*\[following\]\s*$/i) {
        my $follow_url = $1;
        push(@follow_list,$follow_url);
        }
        
        if ($line =~ m/ERROR\s+\d+/) {
        $error_text .= $line;
        }
        
        $full_text .= $line;
    } 
    else { # wget finished, terminate naturally
        #print STDERR "\nPerl: open2 command, input stream closed. Wget terminated naturally.\n";
        close($chld_in);
        close($chld_out);
        # Program terminates only when the following line is included 
        # http://perldoc.perl.org/IPC/Open2.html explains why this is necessary
        # it prevents the child from turning into a "zombie process".
        # While the wget process terminates without it, this perl script does not: 
        # the DOS prompt is not returned without it.
        waitpid $childpid, 0;
        $loop = 0;
        
        $childpid = undef;
        if(defined $port) {
        $read_set->remove($serverSocket);
        close($serverSocket);
        }
    }

    # if we run this script from the command-line (as opposed to from GLI), 
    # then we're not working with sockets and can therefore can skip the next bits
    next unless(defined $port);

    # http://www.perlfect.com/articles/select.shtml
    # "multiplex between several filehandles within a single thread of control, 
    # thus creating the effect of parallelism in the handling of I/O."
    my @rh_set = $read_set->can_read(0.002); # every 2 ms check if there's a client socket connecting

    # take all readable handles in turn
    foreach my $rh (@rh_set) {
        if($rh == $serverSocket) {
        my $client = $rh->accept();
        #$client->autoflush(1); # autoflush output buffer - don't put this back in: splits output irregularly over multilines
        print $client "Talked to ServerSocket (port $port). Connection accepted\n";
        
        # Read from the client (getting rid of trailing newline)
        # Has the client sent the <<STOP>> signal?
        my $signal = <$client>;
        chomp($signal); 
        if($signal eq "<<STOP>>") {
            print $client "Perl received STOP signal (on port $port): stopping wget\n";
            $loop = 0;                          # out of outer while loop
            $self->{'forced_quit'} = 1;         # subclasses need to know we're quitting
            
            # Sometimes the wget process takes some time to start up. If the STOP signal
            # was sent, don't try to terminate the process until we know it is running. 
            # Otherwise wget may start running after we tried to kill it. Wait 5 seconds
            # for it to start up, checking for whether it is running in order to kill it.
            for(my $seconds = 1; $seconds <= 5; $seconds++) {
            if(kill(0, $childpid)) { 
                # If kill(0, $childpid) returns true, then the process is running
                # and we need to kill it.
                close($chld_in);
                close($chld_out);
                kill("TERM", $childpid);
                
                $childpid = undef;
                
                # Stop monitoring the read_handle and close the serverSocket 
                # (the Java end will close the client socket that Java opened)
                $read_set->remove($rh);     #$read_set->remove($serverSocket);
                close($rh);             #close($serverSocket);
                print $client "Perl terminated wget and is about to exit\n";
            }
            else { # the process may just be starting up, wait
                sleep(1);
            }
            last;                           # out of inner for loop
            }
            last;                               # out of foreach loop
        }
        }
    }
    }

    my $command_status = $?;
    if ($command_status != 0) {
    $error_text .= "Exit error: $command_status";
    }

    if ($changed_dir) {
    chdir $current_dir;
    }
    
    my $final_follow = pop(@follow_list); # might be undefined, but that's OK
    
    return ($full_text,$error_text,$final_follow);
}


# TODO: Check if the URL is valid?? Not sure what should be in this function yet!!
sub checkURL
{
    my ($self) = @_;
    if ($self->{'url'} eq "")
    {
    &error("checkURL","no URL is specified!! Please specifies the URL for downloading.");
    }
}

sub error
{
    my ($strFunctionName,$strError) = @_;
    {
    print "Error occoured in WgetDownload.pm\n".
        "In Function:".$strFunctionName."\n".
        "Error Message:".$strError."\n";
    exit(-1);
    }
}

1;