source: gsdl/trunk/perllib/util.pm@ 16380

Last change on this file since 16380 was 16380, checked in by kjdon, 16 years ago

added two methods, get_full_filenames (which used to be in BasePlugin), and get_prefix_and_tail_by_regex (which is used with associate_tail_re stuff)

  • Property svn:keywords set to Author Date Id Revision
File size: 23.3 KB
Line 
1###########################################################################
2#
3# util.pm -- various useful utilities
4# A component of the Greenstone digital library software
5# from the New Zealand Digital Library Project at the
6# University of Waikato, New Zealand.
7#
8# Copyright (C) 1999 New Zealand Digital Library Project
9#
10# This program is free software; you can redistribute it and/or modify
11# it under the terms of the GNU General Public License as published by
12# the Free Software Foundation; either version 2 of the License, or
13# (at your option) any later version.
14#
15# This program is distributed in the hope that it will be useful,
16# but WITHOUT ANY WARRANTY; without even the implied warranty of
17# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18# GNU General Public License for more details.
19#
20# You should have received a copy of the GNU General Public License
21# along with this program; if not, write to the Free Software
22# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23#
24###########################################################################
25
26package util;
27
28use File::Copy;
29use File::Basename;
30
31use strict;
32
33
34# removes files (but not directories)
35sub rm {
36 my (@files) = @_;
37 my @filefiles = ();
38
39 # make sure the files we want to delete exist
40 # and are regular files
41 foreach my $file (@files) {
42 if (!-e $file) {
43 print STDERR "util::rm $file does not exist\n";
44 } elsif ((!-f $file) && (!-l $file)) {
45 print STDERR "util::rm $file is not a regular (or symbolic) file\n";
46 } else {
47 push (@filefiles, $file);
48 }
49 }
50
51 # remove the files
52 my $numremoved = unlink @filefiles;
53
54 # check to make sure all of them were removed
55 if ($numremoved != scalar(@filefiles)) {
56 print STDERR "util::rm Not all files were removed\n";
57 }
58}
59
60
61
62# recursive removal
63sub filtered_rm_r {
64 my ($files,$file_accept_re,$file_reject_re) = @_;
65
66 my @files_array = (ref $files eq "ARRAY") ? @$files : ($files);
67
68 # recursively remove the files
69 foreach my $file (@files_array) {
70 $file =~ s/[\/\\]+$//; # remove trailing slashes
71
72 if (!-e $file) {
73 print STDERR "util::filtered_rm_r $file does not exist\n";
74
75 } elsif ((-d $file) && (!-l $file)) { # don't recurse down symbolic link
76 # get the contents of this directory
77 if (!opendir (INDIR, $file)) {
78 print STDERR "util::filtered_rm_r could not open directory $file\n";
79 } else {
80 my @filedir = grep (!/^\.\.?$/, readdir (INDIR));
81 closedir (INDIR);
82
83 # remove all the files in this directory
84 map {$_="$file/$_";} @filedir;
85 &filtered_rm_r (\@filedir,$file_accept_re,$file_reject_re);
86
87 if (!defined $file_accept_re && !defined $file_reject_re) {
88 # remove this directory
89 if (!rmdir $file) {
90 print STDERR "util::filtered_rm_r couldn't remove directory $file\n";
91 }
92 }
93 }
94 } else {
95 next if (defined $file_reject_re && ($file =~ m/$file_reject_re/));
96
97 if ((!defined $file_accept_re) || ($file =~ m/$file_accept_re/)) {
98 # remove this file
99 &rm ($file);
100 }
101 }
102 }
103}
104
105
106# recursive removal
107sub rm_r {
108 my (@files) = @_;
109
110 # use the more general (but reterospectively written function
111 # filtered_rm_r function()
112
113 filtered_rm_r(\@files,undef,undef); # no accept or reject expressions
114}
115
116
117
118
119# moves a file or a group of files
120sub mv {
121 my $dest = pop (@_);
122 my (@srcfiles) = @_;
123
124 # remove trailing slashes from source and destination files
125 $dest =~ s/[\\\/]+$//;
126 map {$_ =~ s/[\\\/]+$//;} @srcfiles;
127
128 # a few sanity checks
129 if (scalar (@srcfiles) == 0) {
130 print STDERR "util::mv no destination directory given\n";
131 return;
132 } elsif ((scalar (@srcfiles) > 1) && (!-d $dest)) {
133 print STDERR "util::mv if multiple source files are given the ".
134 "destination must be a directory\n";
135 return;
136 }
137
138 # move the files
139 foreach my $file (@srcfiles) {
140 my $tempdest = $dest;
141 if (-d $tempdest) {
142 my ($filename) = $file =~ /([^\\\/]+)$/;
143 $tempdest .= "/$filename";
144 }
145 if (!-e $file) {
146 print STDERR "util::mv $file does not exist\n";
147 } else {
148 rename ($file, $tempdest);
149 }
150 }
151}
152
153
154# copies a file or a group of files
155sub cp {
156 my $dest = pop (@_);
157 my (@srcfiles) = @_;
158
159 # remove trailing slashes from source and destination files
160 $dest =~ s/[\\\/]+$//;
161 map {$_ =~ s/[\\\/]+$//;} @srcfiles;
162
163 # a few sanity checks
164 if (scalar (@srcfiles) == 0) {
165 print STDERR "util::cp no destination directory given\n";
166 return;
167 } elsif ((scalar (@srcfiles) > 1) && (!-d $dest)) {
168 print STDERR "util::cp if multiple source files are given the ".
169 "destination must be a directory\n";
170 return;
171 }
172
173 # copy the files
174 foreach my $file (@srcfiles) {
175 my $tempdest = $dest;
176 if (-d $tempdest) {
177 my ($filename) = $file =~ /([^\\\/]+)$/;
178 $tempdest .= "/$filename";
179 }
180 if (!-e $file) {
181 print STDERR "util::cp $file does not exist\n";
182 } elsif (!-f $file) {
183 print STDERR "util::cp $file is not a plain file\n";
184 } else {
185 &File::Copy::copy ($file, $tempdest);
186 }
187 }
188}
189
190
191
192# recursively copies a file or group of files
193# syntax: cp_r (sourcefiles, destination directory)
194# destination must be a directory - to copy one file to
195# another use cp instead
196sub cp_r {
197 my $dest = pop (@_);
198 my (@srcfiles) = @_;
199
200 # a few sanity checks
201 if (scalar (@srcfiles) == 0) {
202 print STDERR "util::cp_r no destination directory given\n";
203 return;
204 } elsif (-f $dest) {
205 print STDERR "util::cp_r destination must be a directory\n";
206 return;
207 }
208
209 # create destination directory if it doesn't exist already
210 if (! -d $dest) {
211 my $store_umask = umask(0002);
212 mkdir ($dest, 0777);
213 umask($store_umask);
214 }
215
216 # copy the files
217 foreach my $file (@srcfiles) {
218
219 if (!-e $file) {
220 print STDERR "util::cp_r $file does not exist\n";
221
222 } elsif (-d $file) {
223 # make the new directory
224 my ($filename) = $file =~ /([^\\\/]*)$/;
225 $dest = &util::filename_cat ($dest, $filename);
226 my $store_umask = umask(0002);
227 mkdir ($dest, 0777);
228 umask($store_umask);
229
230 # get the contents of this directory
231 if (!opendir (INDIR, $file)) {
232 print STDERR "util::cp_r could not open directory $file\n";
233 } else {
234 my @filedir = readdir (INDIR);
235 closedir (INDIR);
236 foreach my $f (@filedir) {
237 next if $f =~ /^\.\.?$/;
238 # copy all the files in this directory
239 my $ff = &util::filename_cat ($file, $f);
240 &cp_r ($ff, $dest);
241 }
242 }
243
244 } else {
245 &cp($file, $dest);
246 }
247 }
248}
249
250# copies a directory and its contents, excluding subdirectories, into a new directory
251sub cp_r_toplevel {
252 my $dest = pop (@_);
253 my (@srcfiles) = @_;
254
255 # a few sanity checks
256 if (scalar (@srcfiles) == 0) {
257 print STDERR "util::cp_r no destination directory given\n";
258 return;
259 } elsif (-f $dest) {
260 print STDERR "util::cp_r destination must be a directory\n";
261 return;
262 }
263
264 # create destination directory if it doesn't exist already
265 if (! -d $dest) {
266 my $store_umask = umask(0002);
267 mkdir ($dest, 0777);
268 umask($store_umask);
269 }
270
271 # copy the files
272 foreach my $file (@srcfiles) {
273
274 if (!-e $file) {
275 print STDERR "util::cp_r $file does not exist\n";
276
277 } elsif (-d $file) {
278 # make the new directory
279 my ($filename) = $file =~ /([^\\\/]*)$/;
280 $dest = &util::filename_cat ($dest, $filename);
281 my $store_umask = umask(0002);
282 mkdir ($dest, 0777);
283 umask($store_umask);
284
285 # get the contents of this directory
286 if (!opendir (INDIR, $file)) {
287 print STDERR "util::cp_r could not open directory $file\n";
288 } else {
289 my @filedir = readdir (INDIR);
290 closedir (INDIR);
291 foreach my $f (@filedir) {
292 next if $f =~ /^\.\.?$/;
293
294 # copy all the files in this directory, but not directories
295 my $ff = &util::filename_cat ($file, $f);
296 if (-f $ff) {
297 &cp($ff, $dest);
298 #&cp_r ($ff, $dest);
299 }
300 }
301 }
302
303 } else {
304 &cp($file, $dest);
305 }
306 }
307}
308
309sub mk_dir {
310 my ($dir) = @_;
311
312 my $store_umask = umask(0002);
313 my $mkdir_ok = mkdir ($dir, 0777);
314 umask($store_umask);
315
316 if (!$mkdir_ok)
317 {
318 print STDERR "util::mk_dir could not create directory $dir\n";
319 return;
320 }
321}
322
323# in case anyone cares - I did some testing (using perls Benchmark module)
324# on this subroutine against File::Path::mkpath (). mk_all_dir() is apparently
325# slightly faster (surprisingly) - Stefan.
326sub mk_all_dir {
327 my ($dir) = @_;
328
329 # use / for the directory separator, remove duplicate and
330 # trailing slashes
331 $dir=~s/[\\\/]+/\//g;
332 $dir=~s/[\\\/]+$//;
333
334 # make sure the cache directory exists
335 my $dirsofar = "";
336 my $first = 1;
337 foreach my $dirname (split ("/", $dir)) {
338 $dirsofar .= "/" unless $first;
339 $first = 0;
340
341 $dirsofar .= $dirname;
342
343 next if $dirname =~ /^(|[a-z]:)$/i;
344 if (!-e $dirsofar)
345 {
346 my $store_umask = umask(0002);
347 my $mkdir_ok = mkdir ($dirsofar, 0777);
348 umask($store_umask);
349 if (!$mkdir_ok)
350 {
351 print STDERR "util::mk_all_dir could not create directory $dirsofar\n";
352 return;
353 }
354 }
355 }
356}
357
358# make hard link to file if supported by OS, otherwise copy the file
359sub hard_link {
360 my ($src, $dest) = @_;
361
362 # remove trailing slashes from source and destination files
363 $src =~ s/[\\\/]+$//;
364 $dest =~ s/[\\\/]+$//;
365
366 # a few sanity checks
367 if (-e $dest) {
368 # destination file already exists
369 return;
370 }
371 elsif (!-e $src) {
372 print STDERR "util::hard_link source file $src does not exist\n";
373 return 1;
374 }
375 elsif (-d $src) {
376 print STDERR "util::hard_link source $src is a directory\n";
377 return 1;
378 }
379
380 my $dest_dir = &File::Basename::dirname($dest);
381 mk_all_dir($dest_dir) if (!-e $dest_dir);
382
383 # link not supported on windows 9x
384 if (($ENV{'GSDLOS'} =~ /^windows$/i) && (Win32::FsType() !~ /^ntfs$/i)) {
385 &File::Copy::copy ($src, $dest);
386
387 } elsif (!link($src, $dest)) {
388 print STDERR "util::hard_link: unable to create hard link. ";
389 print STDERR " Attempting to copy file: $src -> $dest\n";
390 &File::Copy::copy ($src, $dest);
391 }
392 return 0;
393}
394
395# make soft link to file if supported by OS, otherwise copy file
396sub soft_link {
397 my ($src, $dest, $ensure_paths_absolute) = @_;
398
399 # remove trailing slashes from source and destination files
400 $src =~ s/[\\\/]+$//;
401 $dest =~ s/[\\\/]+$//;
402
403 # Ensure file paths are absolute IF requested to do so
404 # Soft_linking didn't work for relative paths
405 if(defined $ensure_paths_absolute && $ensure_paths_absolute) {
406 # We need to ensure that the src file is the absolute path
407 # See http://perldoc.perl.org/File/Spec.html
408 if(!File::Spec->file_name_is_absolute( $src )) { # it's relative
409 $src = File::Spec->rel2abs($src); # make absolute
410 }
411 # Might as well ensure that the destination file's absolute path is used
412 if(!File::Spec->file_name_is_absolute( $dest )) {
413 $dest = File::Spec->rel2abs($dest); # make absolute
414 }
415 }
416
417 # a few sanity checks
418 if (!-e $src) {
419 print STDERR "util::soft_link source file $src does not exist\n";
420 return 0;
421 }
422
423 my $dest_dir = &File::Basename::dirname($dest);
424 mk_all_dir($dest_dir) if (!-e $dest_dir);
425
426 if ($ENV{'GSDLOS'} =~ /^windows$/i) {
427 # symlink not supported on windows
428 &File::Copy::copy ($src, $dest);
429
430 } elsif (!eval {symlink($src, $dest)}) {
431 print STDERR "util::soft_link: unable to create soft link.\n";
432 return 0;
433 }
434
435 return 1;
436}
437
438
439
440
441# updates a copy of a directory in some other part of the filesystem
442# verbosity settings are: 0=low, 1=normal, 2=high
443# both $fromdir and $todir should be absolute paths
444sub cachedir {
445 my ($fromdir, $todir, $verbosity) = @_;
446 $verbosity = 1 unless defined $verbosity;
447
448 # use / for the directory separator, remove duplicate and
449 # trailing slashes
450 $fromdir=~s/[\\\/]+/\//g;
451 $fromdir=~s/[\\\/]+$//;
452 $todir=~s/[\\\/]+/\//g;
453 $todir=~s/[\\\/]+$//;
454
455 &mk_all_dir ($todir);
456
457 # get the directories in ascending order
458 if (!opendir (FROMDIR, $fromdir)) {
459 print STDERR "util::cachedir could not read directory $fromdir\n";
460 return;
461 }
462 my @fromdir = grep (!/^\.\.?$/, sort(readdir (FROMDIR)));
463 closedir (FROMDIR);
464
465 if (!opendir (TODIR, $todir)) {
466 print STDERR "util::cacedir could not read directory $todir\n";
467 return;
468 }
469 my @todir = grep (!/^\.\.?$/, sort(readdir (TODIR)));
470 closedir (TODIR);
471
472 my $fromi = 0;
473 my $toi = 0;
474
475 while ($fromi < scalar(@fromdir) || $toi < scalar(@todir)) {
476# print "fromi: $fromi toi: $toi\n";
477
478 # see if we should delete a file/directory
479 # this should happen if the file/directory
480 # is not in the from list or if its a different
481 # size, or has an older timestamp
482 if ($toi < scalar(@todir)) {
483 if (($fromi >= scalar(@fromdir)) ||
484 ($todir[$toi] lt $fromdir[$fromi] ||
485 ($todir[$toi] eq $fromdir[$fromi] &&
486 &differentfiles("$fromdir/$fromdir[$fromi]","$todir/$todir[$toi]",
487 $verbosity)))) {
488
489 # the files are different
490 &rm_r("$todir/$todir[$toi]");
491 splice(@todir, $toi, 1); # $toi stays the same
492
493 } elsif ($todir[$toi] eq $fromdir[$fromi]) {
494 # the files are the same
495 # if it is a directory, check its contents
496 if (-d "$todir/$todir[$toi]") {
497 &cachedir ("$fromdir/$fromdir[$fromi]",
498 "$todir/$todir[$toi]", $verbosity);
499 }
500
501 $toi++;
502 $fromi++;
503 next;
504 }
505 }
506
507 # see if we should insert a file/directory
508 # we should insert a file/directory if there
509 # is no tofiles left or if the tofile does not exist
510 if ($fromi < scalar(@fromdir) && ($toi >= scalar(@todir) ||
511 $todir[$toi] gt $fromdir[$fromi])) {
512 &cp_r ("$fromdir/$fromdir[$fromi]", "$todir/$fromdir[$fromi]");
513 splice (@todir, $toi, 0, $fromdir[$fromi]);
514
515 $toi++;
516 $fromi++;
517 }
518 }
519}
520
521# this function returns -1 if either file is not found
522# assumes that $file1 and $file2 are absolute file names or
523# in the current directory
524# $file2 is allowed to be newer than $file1
525sub differentfiles {
526 my ($file1, $file2, $verbosity) = @_;
527 $verbosity = 1 unless defined $verbosity;
528
529 $file1 =~ s/\/+$//;
530 $file2 =~ s/\/+$//;
531
532 my ($file1name) = $file1 =~ /\/([^\/]*)$/;
533 my ($file2name) = $file2 =~ /\/([^\/]*)$/;
534
535 return -1 unless (-e $file1 && -e $file2);
536 if ($file1name ne $file2name) {
537 print STDERR "filenames are not the same\n" if ($verbosity >= 2);
538 return 1;
539 }
540
541 my @file1stat = stat ($file1);
542 my @file2stat = stat ($file2);
543
544 if (-d $file1) {
545 if (! -d $file2) {
546 print STDERR "one file is a directory\n" if ($verbosity >= 2);
547 return 1;
548 }
549 return 0;
550 }
551
552 # both must be regular files
553 unless (-f $file1 && -f $file2) {
554 print STDERR "one file is not a regular file\n" if ($verbosity >= 2);
555 return 1;
556 }
557
558 # the size of the files must be the same
559 if ($file1stat[7] != $file2stat[7]) {
560 print STDERR "different sized files\n" if ($verbosity >= 2);
561 return 1;
562 }
563
564 # the second file cannot be older than the first
565 if ($file1stat[9] > $file2stat[9]) {
566 print STDERR "file is older\n" if ($verbosity >= 2);
567 return 1;
568 }
569
570 return 0;
571}
572
573
574sub get_tmp_filename
575{
576 my $file_ext = shift(@_) || undef;
577
578 my $opt_dot_file_ext = (defined $file_ext) ? ".$file_ext" : "";
579
580 my $tmpdir = filename_cat($ENV{'GSDLHOME'}, "tmp");
581 &mk_all_dir ($tmpdir) unless -e $tmpdir;
582
583 my $count = 1000;
584 my $rand = int(rand $count);
585 my $full_tmp_filename = &filename_cat($tmpdir, "F$rand$opt_dot_file_ext");
586
587 while (-e $full_tmp_filename) {
588 $rand = int(rand $count);
589 $full_tmp_filename = &filename_cat($tmpdir, "F$rand$opt_dot_file_ext");
590 $count++;
591 }
592
593 return $full_tmp_filename;
594}
595
596
597sub filename_cat {
598 my $first_file = shift(@_);
599 my (@filenames) = @_;
600
601# Useful for debugging
602# -- might make sense to call caller(0) rather than (1)??
603# my ($cpackage,$cfilename,$cline,$csubr,$chas_args,$cwantarray) = caller(1);
604# print STDERR "Calling method; $cfilename:$cline $cpackage->$csubr\n";
605
606 # Check for empty first filename
607 if ($first_file =~ /\S/) {
608 unshift(@filenames, $first_file);
609 }
610
611 my $filename = join("/", @filenames);
612
613 # remove duplicate slashes and remove the last slash
614 if ($ENV{'GSDLOS'} =~ /^windows$/i) {
615 $filename =~ s/[\\\/]+/\\/g;
616 } else {
617 $filename =~ s/[\/]+/\//g;
618 # DB: want a filename abc\de.html to remain like this
619 }
620 $filename =~ s/[\\\/]$//;
621
622 return $filename;
623}
624
625
626sub envvar_prepend {
627 my ($var,$val) = @_;
628
629 my $current_val = $ENV{$var};
630
631 if ($ENV{'GSDLOS'} =~ /^windows$/i) {
632 $ENV{$var} .= "$val;$current_val";
633 }
634 else {
635 $ENV{$var} .= "$val:$current_val";
636 }
637}
638
639sub envvar_append {
640 my ($var,$val) = @_;
641
642 if ($ENV{'GSDLOS'} =~ /^windows$/i) {
643 $ENV{$var} .= ";$val";
644 }
645 else {
646 $ENV{$var} .= ":$val";
647 }
648}
649
650# splits a filename into a prefix and a tail extension using the tail_re, or
651# if that fails, splits on the file_extension . (dot)
652sub get_prefix_and_tail_by_regex {
653
654 my ($filename,$tail_re) = @_;
655
656 my ($file_prefix,$file_ext) = ($filename =~ m/^(.*?)($tail_re)$/);
657 if ((!defined $file_prefix) || (!defined $file_ext)) {
658 ($file_prefix,$file_ext) = ($filename =~ m/^(.*)(\..*?)$/);
659 }
660
661 return ($file_prefix,$file_ext);
662}
663
664# get full path and file only path from a base_dir (which may be empty) and
665# file (which may contain directories)
666sub get_full_filenames {
667 my ($base_dir, $file) = @_;
668
669 my $filename_full_path = $file;
670 # add on directory if present
671 $filename_full_path = &util::filename_cat ($base_dir, $file) if $base_dir =~ /\S/;
672
673 my $filename_no_path = $file;
674
675 # remove directory if present
676 $filename_no_path =~ s/^.*[\/\\]//;
677 return ($filename_full_path, $filename_no_path);
678}
679
680# returns the path of a file without the filename -- ie. the directory the file is in
681sub filename_head {
682 my $filename = shift(@_);
683
684 if ($ENV{'GSDLOS'} =~ /^windows$/i) {
685 $filename =~ s/[^\\\\]*$//;
686 }
687 else {
688 $filename =~ s/[^\\\/]*$//;
689 }
690
691 return $filename;
692}
693
694
695# returns 1 if filename1 and filename2 point to the same
696# file or directory
697sub filenames_equal {
698 my ($filename1, $filename2) = @_;
699
700 # use filename_cat to clean up trailing slashes and
701 # multiple slashes
702 $filename1 = filename_cat ($filename1);
703 $filename2 = filename_cat ($filename2);
704
705 # filenames not case sensitive on windows
706 if ($ENV{'GSDLOS'} =~ /^windows$/i) {
707 $filename1 =~ tr/[A-Z]/[a-z]/;
708 $filename2 =~ tr/[A-Z]/[a-z]/;
709 }
710 return 1 if $filename1 eq $filename2;
711 return 0;
712}
713
714sub filename_within_collection
715{
716 my ($filename) = @_;
717
718 my $collect_dir = $ENV{'GSDLCOLLECTDIR'};
719
720 if (defined $collect_dir) {
721 my $dirsep = &util::get_dirsep();
722 if ($collect_dir !~ m/$dirsep$/) {
723 $collect_dir .= $dirsep;
724 }
725
726 $collect_dir =~ s/\\/\\\\/g; # escape DOS style file separator
727
728 # if from within GSDLCOLLECTDIR, then remove directory prefix
729 # so source_filename is realative to it. This is done to aid
730 # portability, i.e. the collection can be moved to somewhere
731 # else on the file system and the archives directory will still
732 # work. This is needed, for example in the applet version of
733 # GLI where GSDLHOME/collect on the server will be different to
734 # the collect directory of the remove user. Of course,
735 # GSDLCOLLECTDIR subsequently needs to be put back on to turn
736 # it back into a full pathname.
737
738 if ($filename =~ /^$collect_dir(.*)$/) {
739 $filename = $1;
740 }
741 }
742
743 return $filename;
744}
745
746
747sub get_dirsep {
748
749 if ($ENV{'GSDLOS'} =~ /^windows$/i) {
750 return "\\";
751 } else {
752 return "\/";
753 }
754}
755
756sub get_os_dirsep {
757
758 if ($ENV{'GSDLOS'} =~ /^windows$/i) {
759 return "\\\\";
760 } else {
761 return "\\\/";
762 }
763}
764
765sub get_re_dirsep {
766
767 return "\\\\|\\\/";
768}
769
770
771sub get_dirsep_tail {
772 my ($filename) = @_;
773
774 # returns last part of directory or filename
775 # On unix e.g. a/b.d => b.d
776 # a/b/c => c
777
778 my $dirsep = get_re_dirsep();
779 my @dirs = split (/$dirsep/, $filename);
780 my $tail = pop @dirs;
781
782 # - caused problems under windows
783 #my ($tail) = ($filename =~ m/^(?:.*?$dirsep)?(.*?)$/);
784
785 return $tail;
786}
787
788
789# if this is running on windows we want binaries to end in
790# .exe, otherwise they don't have to end in any extension
791sub get_os_exe {
792 return ".exe" if $ENV{'GSDLOS'} =~ /^windows$/i;
793 return "";
794}
795
796
797# test to see whether this is a big or little endian machine
798sub is_little_endian
799{
800 # To determine the name of the operating system, the variable $^O is a cheap alternative to pulling it out of the Config module;
801 # If it is a Macintosh machine (i.e. the Darwin operating system), regardless if it's running on the IBM power-pc cpu or the x86 Intel-based chip with a power-pc emulator running on top of it, it's big-endian
802 # Otherwise, it's little endian
803
804 #return 0 if $^O =~ /^darwin$/i;
805 return 0 if $ENV{'GSDLOS'} =~ /^darwin$/i;
806 return (ord(substr(pack("s",1), 0, 1)) == 1);
807}
808
809
810# will return the collection name if successful, "" otherwise
811sub use_collection {
812 my ($collection, $collectdir) = @_;
813
814 if (!defined $collectdir || $collectdir eq "") {
815 $collectdir = &filename_cat ($ENV{'GSDLHOME'}, "collect");
816 }
817
818 # get and check the collection
819 if (!defined($collection) || $collection eq "") {
820 if (defined $ENV{'GSDLCOLLECTION'}) {
821 $collection = $ENV{'GSDLCOLLECTION'};
822 } else {
823 print STDOUT "No collection specified\n";
824 return "";
825 }
826 }
827
828 if ($collection eq "modelcol") {
829 print STDOUT "You can't use modelcol.\n";
830 return "";
831 }
832
833 # make sure the environment variables GSDLCOLLECTION and GSDLCOLLECTDIR
834 # are defined
835 $ENV{'GSDLCOLLECTION'} = $collection unless defined $ENV{'GSDLCOLLECTION'};
836 $ENV{'GSDLCOLLECTDIR'} = &filename_cat ($collectdir, $collection);
837
838 # make sure this collection exists
839 if (!-e $ENV{'GSDLCOLLECTDIR'}) {
840 print STDOUT "Invalid collection ($collection).\n";
841 return "";
842 }
843
844 # everything is ready to go
845 return $collection;
846}
847
848
849
850
851# will return the collection name if successful, "" otherwise.
852# Like use_collection (above) but for greenstone 3 (taking account of site level)
853
854sub use_site_collection {
855 my ($site, $collection, $collectdir) = @_;
856
857 if (!defined $collectdir || $collectdir eq "") {
858 die "GSDL3HOME not set.\n" unless defined $ENV{'GSDL3HOME'};
859 $collectdir = &filename_cat ($ENV{'GSDL3HOME'}, "sites", $site, "collect");
860 }
861
862 # collectdir explicitly set by this point (using $site variable if required).
863 # Can call "old" gsdl2 use_collection now.
864
865 return use_collection($collection,$collectdir);
866}
867
868
869
870sub locate_config_file
871{
872 my ($file) = @_;
873
874 my $locations = locate_config_files($file);
875
876 return shift @$locations; # returns undef if 'locations' is empty
877}
878
879
880sub locate_config_files
881{
882 my ($file) = @_;
883
884 my @locations = ();
885
886 if (-e $file) {
887 # Clearly specified (most likely full filename)
888 # No need to hunt in 'etc' directories, return value unchanged
889 push(@locations,$file);
890 }
891 else {
892 # Check for collection specific one before looking in global GSDL 'etc'
893
894 my $test_collect_etc_filename
895 = &util::filename_cat($ENV{'GSDLCOLLECTDIR'},"etc", $file);
896
897 if (-e $test_collect_etc_filename) {
898 push(@locations,$test_collect_etc_filename);
899 }
900
901 my $test_main_etc_filename
902 = &util::filename_cat($ENV{'GSDLHOME'},"etc", $file);
903 if (-e $test_main_etc_filename) {
904 push(@locations,$test_main_etc_filename);
905 }
906 }
907
908 return \@locations;
909}
910
911
912sub hyperlink_text
913{
914 my ($text) = @_;
915
916 $text =~ s/(http:\/\/[^\s]+)/<a href=\"$1\">$1<\/a>/mg;
917 $text =~ s/(^|\s+)(www\.(\w|\.)+)/<a href=\"http:\/\/$2\">$2<\/a>/mg;
918
919 return $text;
920}
921
922
9231;
Note: See TracBrowser for help on using the repository browser.