Context Navigation

source: main/trunk/greenstone3/build.xml@ 25437

Last change on this file since 25437 was 25437, checked in by ak19, 12 years ago
stop-tomcat always does a force stop, since it's the force stop that performs a wait sufficient to allow a proper (re)start or at least without enough messages to indicate if a stop did not take place.
File size: 97.2 KB

Rev	Line
[15124]	1	<?xml version="1.0"?>
	2	<!-- ======================================================================
	3	March 2005
	4
	5	Greenstone3 build and install script
	6
	7	kjdon
	8	====================================================================== -->
	9	<project name="greenstone3" default="usage" basedir=".">
[20241]	10	<echo>os.name: ${os.name}</echo>
[15124]	11
[15799]	12	<!-- ============ classpath =================== -->
	13	<path id="project.classpath">
	14	<fileset dir="lib/java">
	15	<include name="*/.jar"/>
	16	</fileset>
	17	</path>
	18
	19	<!-- ============ self defined tasks =================== -->
	20	<taskdef name="mysetproxy" classname="org.greenstone.anttasks.MySetProxy" classpathref="project.classpath"/>
	21	<taskdef name="getuserandpassword" classname="org.greenstone.anttasks.MyGetUserAndPassword" classpathref="project.classpath"/>
[19930]	22	<taskdef name="rsr" classname="org.greenstone.anttasks.RegexSearchReplace" classpathref="project.classpath"/>
[21196]	23	<!--<taskdef name="svn" classname="org.tigris.subversion.svnant.SvnTask" classpathref="project.classpath"/>-->
[15799]	24	<taskdef name="if" classname="ise.antelope.tasks.IfTask" classpathref="project.classpath"/>
[23854]	25	<taskdef name="stringutil" classname="ise.antelope.tasks.StringUtilTask" classpathref="project.classpath"/>
	26
[19930]	27
[15799]	28	<!-- ===================== Property Definitions =========================== -->
	29
	30	<!--
[15124]	31
	32	Each of the following properties are used in the build script.
	33	Values for these properties are set by the first place they are
	34	defined, from the following list:
	35
	36	* Definitions on the "ant" command line (ant -Dfoo=bar compile).
	37
	38	* Definitions from a "build.properties" file in the top level
[15799]	39	source directory of this application.
[15124]	40
	41	* Definitions from a "build.properties" file in the user's
[15799]	42	home directory.
[15124]	43
	44	* Default definitions in this build.xml file.
	45
	46	You will note below that property values can be composed based on the
	47	contents of previously defined properties. This is a powerful technique
	48	that helps you minimize the number of changes required when your development
	49	environment is modified. Note that property composition is allowed within
	50	"build.properties" files as well as in the "build.xml" script.
	51
[15799]	52	-->
[18227]	53
	54	<!-- create build.properties if it has not been created yet -->
	55	<if>
	56	<bool><not><available file="build.properties"/></not></bool>
	57	<copy file="build.properties.in" tofile="build.properties"/>
	58	</if>
	59
[18515]	60	<!-- create the packages dir if it has not been created yet -->
	61	<mkdir dir="packages"/>
[15799]	62
[15859]	63	<!--the first three properties have to be put on the top to be used by build.properties-->
[19960]	64	<property name="gs2build.home" value="${basedir}${file.separator}gs2build"/>
[15124]	65	<property name="src.packages.home" value="${basedir}/src/packages"/>
[15859]	66	<property name="flax.svn.root" value="http://svn.greenstone.org/flax"/>
[19878]	67
[15124]	68	<property file="build.properties"/>
[16962]	69	<if><bool><available file="${user.home}/build.properties"/></bool>
	70	<property file="${user.home}/build.properties"/>
	71	</if>
[15124]	72
[20464]	73	<!-- now we've read in properties, apply defaults -->
	74	<property name="disable.collection.building" value="false"/>
	75
[15124]	76	<!-- get properties from the environment -->
	77	<property environment="env"/>
[15799]	78
[20127]	79	<!-- get the filesets defining components and executables -->
[19975]	80	<import file="resources/xml/components.xml"/>
[20127]	81	<import file="resources/xml/executables.xml"/>
[15799]	82
	83	<!-- version properties for external packages -->
[20079]	84	<!-- for Java versions < 1.4, we print out the message that Java is too old.
[25131]	85	For Java 1.4, we use Tomcat 5.5, for Java5 and higher, we use Tomcat 7.0-->
	86	<condition property="tomcat.version" value="apache-tomcat-5.5.25" else="apache-tomcat-7.0.26">
[20079]	87	<equals arg1="1.4" arg2="${ant.java.version}"/>
	88	</condition>
[25131]	89	<condition property="tomcat.version.major" value="5" else="7">
[20079]	90	<equals arg1="1.4" arg2="${ant.java.version}"/>
	91	</condition>
[22320]	92	<condition property="privileged.attribute" value="privileged='true'" else="">
[25384]	93	<equals arg1="7" arg2="${tomcat.version.major}"/>
[22320]	94	</condition>
[20233]	95
[22405]	96	<property name="axis.zip.version" value="axis-bin-1_4.zip"/>
	97	<property name="axis.dir.version" value="axis-1_4"/>
[24077]	98	<property name="sqlite.targz.version" value="sqlite-autoconf-3070602.tar.gz"/>
[15799]	99
[15124]	100	<property name="build.home" value="${basedir}/build"/>
	101	<property name="src.home" value="${basedir}/src/java"/>
	102	<property name="packages.home" value="${basedir}/packages"/>
	103	<!-- this may be set in build.properties, eg if you move the web dir to
	104	tomcats webapps directory -->
	105	<property name="web.home" value="${basedir}/web"/>
	106	<!-- jar files needed by applets go here -->
	107	<property name="web.applet" value="${web.home}/applet"/>
[20085]	108
[15124]	109	<!-- jar files needed by the servlet (and extra ones) go here -->
	110	<property name="web.lib" value="${web.home}/WEB-INF/lib"/>
	111	<!-- other files needed by the servlet go here -->
	112	<property name="web.classes" value="${web.home}/WEB-INF/classes"/>
	113	<!--- flax: the WordNet home -->
	114	<property name="wn.home" value="${web.home}/WEB-INF/classes/flax/WordNet"/>
	115
	116	<!-- jni libraries and java wrappers go here -->
	117	<property name="lib.jni" value="${basedir}/lib/jni"/>
[19878]	118
	119	<!-- other jar files needed for installation (but not runtime) go here -->
[18110]	120	<property name="lib.java" value="${basedir}/lib/java"/>
[15799]	121
[15124]	122	<property name="javadocs" value="${basedir}/docs/javadoc"/>
	123
	124	<property name="app.name" value="greenstone3"/>
	125	<property name="app.path" value="/${app.name}"/>
	126
[18124]	127	<property name="admin.dir" value="${basedir}/admin"/>
[15124]	128
	129	<!-- defaults - set these on the command line or in build.properties or they will take these default values-->
	130	<property name="app.version" value="trunk"/>
	131	<property name="branch.path" value="trunk"/>
	132	<property name="branch.revision" value="HEAD"/>
	133
	134	<!--constants -->
	135	<property name="svn.root" value="http://svn.greenstone.org"/>
	136
[19878]	137	<!-- catalina home is set to tomcat basedir if already installed, otherwise
[15124]	138	use greenstone's tomcat -->
[20085]	139	<condition property="catalina.home" value="${tomcat.installed.path}" else="${packages.home}/tomcat">
[15124]	140	<and>
	141	<isset property="tomcat.installed.path"/>
	142	<not>
[16936]	143	<equals arg1="" arg2="${tomcat.installed.path}"/>
[15124]	144	</not>
	145	</and>
	146	</condition>
[25131]	147
[15124]	148	<property name="os.linux" value="Linux"/>
	149	<property name="os.mac" value="Mac OS X"/>
	150	<property name="os.solaris" value="SunOS"/>
	151	<property name="os.unix" value="${os.linux},${os.mac},${os.solaris}"/>
[22056]	152	<property name="os.windows" value="Windows 95,Windows 98,Windows 2000,Windows 2003,Windows XP,Windows NT,Windows ME,Windows Vista,Windows 7"/> <!-- check this!!!-->
[15124]	153
	154	<!-- this is true for linux and macs -->
	155	<condition property="current.os.isunix">
	156	<os family="unix"/>
	157	</condition>
	158
	159	<condition property="current.os.isunixnotmac">
	160	<and>
	161	<os family="unix"/>
	162	<not>
[19933]	163	<os family="mac"/>
[15124]	164	</not>
	165	</and>
	166	</condition>
[19878]	167
[15124]	168	<condition property="current.os.ismac">
	169	<os family="mac"/>
	170	</condition>
	171
	172	<condition property="current.os.iswindows">
	173	<os family="windows"/>
	174	</condition>
	175
[19933]	176	<!-- is there a better way to do this?? what about solaris?? -->
	177	<condition property="os.bin.dir" value="windows">
	178	<os family="windows"/>
	179	</condition>
	180	<condition property="os.bin.dir" value="darwin">
	181	<os family="mac"/>
	182	</condition>
	183	<condition property="os.bin.dir" value="linux">
	184	<and>
	185	<os family="unix"/>
	186	<not>
	187	<os family="mac"/>
	188	</not>
	189	</and>
	190	</condition>
	191
	192
[19878]	193	<condition property="collection.building.disabled">
[20464]	194	<and>
	195	<isset property="disable.collection.building"/>
	196	<istrue value="${disable.collection.building}"/>
	197	</and>
[19878]	198	</condition>
	199
[15124]	200	<condition property="collection.building.enabled">
	201	<not>
[20464]	202	<istrue value="${disable.collection.building}"/>
[15124]	203	</not>
	204	</condition>
[19878]	205
[15124]	206	<condition property="collection.building.enabled.windows">
	207	<and>
[20464]	208	<istrue value="${collection.building.enabled}"/>
[15124]	209	<isset property="current.os.iswindows"/>
	210	</and>
	211	</condition>
	212
	213	<condition property="collection.building.enabled.unix">
	214	<and>
[20464]	215	<istrue value="${collection.building.enabled}"/>
[15124]	216	<isset property="current.os.isunix"/>
	217	</and>
	218	</condition>
[22847]	219
[20085]	220	<condition property="static.arg" value="LDFLAGS=-static" else=" ">
[19931]	221	<isset property="compile.static"/>
	222	</condition>
[22184]	223
[22845]	224	<!-- If building a release then we want to adjust environment variables so that the support library can be see during compilation -->
	225	<if><bool><isset property="use.support.lib"/></bool>
[23599]	226	<property name="gnome-lib-dir" value="${basedir}/ext/gnome-lib-minimal/${os.bin.dir}"/>
[22845]	227
[23599]	228	<if><bool><isset property="env.CFLAGS"/></bool>
	229	<property name="cflags.arg" value="CFLAGS="-I${gnome-lib-dir}/include ${env.CFLAGS}""/>
	230	<else>
	231	<property name="cflags.arg" value="CFLAGS="-I${gnome-lib-dir}/include""/>
	232	</else>
	233	</if>
[22845]	234
[23599]	235	<if><bool><isset property="env.CPPFLAGS"/></bool>
	236	<property name="cppflags.arg" value="CPPFLAGS="-I${gnome-lib-dir}/include ${env.CPPFLAGS}""/>
	237	<else>
	238	<property name="cppflags.arg" value="CPPFLAGS="-I${gnome-lib-dir}/include""/>
	239	</else>
	240	</if>
[22847]	241
[23599]	242	<if><bool><isset property="env.CXXFLAGS"/></bool>
	243	<property name="cxxflags.arg" value="CXXFLAGS="-I${gnome-lib-dir}/include ${env.CXXFLAGS}""/>
	244	<else>
	245	<property name="cxxflags.arg" value="CXXFLAGS="-I${gnome-lib-dir}/include""/>
	246	</else>
	247	</if>
	248
	249	<if><bool><isset property="env.LDFLAGS"/></bool>
	250	<property name="ldflags.arg" value="LDFLAGS="-L${gnome-lib-dir}/lib ${env.LDFLAGS}""/>
	251	<else>
	252	<property name="ldflags.arg" value="LDFLAGS="-L${gnome-lib-dir}/lib""/>
	253	</else>
	254	</if>
	255
	256	<if><bool><isset property="env.PATH"/></bool>
	257	<property name="path.arg" value="PATH="${gnome-lib-dir}/bin:${env.PATH}""/>
	258	<else>
	259	<property name="path.arg" value="PATH="${gnome-lib-dir}/bin""/>
	260	</else>
	261	</if>
	262
	263	<if><bool><isset property="env.PKG_CONFIG_PATH"/></bool>
	264	<property name="pcpath.arg" value="PKG_CONFIG_PATH="${gnome-lib-dir}/lib/pkgconfig:${env.PKG_CONFIG_PATH}""/>
	265	<else>
	266	<property name="pcpath.arg" value="PKG_CONFIG_PATH="${gnome-lib-dir}/lib/pkgconfig""/>
	267	</else>
	268	</if>
	269
[23611]	270	<if><bool><equals arg1="${os.bin.dir}" arg2="darwin"/></bool>
	271	<if><bool><isset property="env.DYLD_LIBRARY_PATH"/></bool>
	272	<property name="ldlpath.arg" value="DYLD_LIBRARY_PATH="${gnome-lib-dir}/lib:${env.DYLD_LIBRARY_PATH}""/>
	273	<else>
	274	<property name="ldlpath.arg" value="DYLD_LIBRARY_PATH="${gnome-lib-dir}/lib""/>
	275	</else>
	276	</if>
[23599]	277	<else>
[23611]	278	<if><bool><isset property="env.LD_LIBRARY_PATH"/></bool>
	279	<property name="ldlpath.arg" value="LD_LIBRARY_PATH="${gnome-lib-dir}/lib:${env.LD_LIBRARY_PATH}""/>
	280	<else>
	281	<property name="ldlpath.arg" value="LD_LIBRARY_PATH="${gnome-lib-dir}/lib""/>
	282	</else>
	283	</if>
[23599]	284	</else>
	285	</if>
	286
	287	<else>
	288	<if><bool><isset property="env.CFLAGS"/></bool>
	289	<property name="cflags.arg" value="CFLAGS="${env.CFLAGS}""/>
	290	<else>
	291	<property name="cflags.arg" value=" "/>
	292	</else>
	293	</if>
	294
	295	<if><bool><isset property="env.CPPFLAGS"/></bool>
	296	<property name="cppflags.arg" value="CPPFLAGS="${env.CPPFLAGS}""/>
	297	<else>
	298	<property name="cppflags.arg" value=" "/>
	299	</else>
	300	</if>
	301
	302	<if><bool><isset property="env.CXXFLAGS"/></bool>
	303	<property name="cxxflags.arg" value="CXXFLAGS="${env.CXXFLAGS}""/>
	304	<else>
	305	<property name="cxxflags.arg" value=" "/>
	306	</else>
	307	</if>
	308
	309	<if><bool><isset property="env.LDFLAGS"/></bool>
	310	<property name="ldflags.arg" value="LDFLAGS="${env.LDFLAGS}""/>
	311	<else>
	312	<property name="ldflags.arg" value=" "/>
	313	</else>
	314	</if>
	315
	316	<if><bool><isset property="env.PATH"/></bool>
	317	<property name="path.arg" value="PATH="${env.PATH}""/>
	318	<else>
	319	<property name="path.arg" value=" "/>
	320	</else>
	321	</if>
	322
	323	<if><bool><isset property="env.PKG_CONFIG_PATH"/></bool>
	324	<property name="pcpath.arg" value="PKG_CONFIG_PATH="${env.PKG_CONFIG_PATH}""/>
	325	<else>
	326	<property name="pcpath.arg" value=" "/>
	327	</else>
	328	</if>
	329
[23611]	330	<if><bool><equals arg1="${os.bin.dir}" arg2="darwin"/></bool>
	331	<if><bool><isset property="env.DYLD_LIBRARY_PATH"/></bool>
	332	<property name="ldlpath.arg" value="DYLD_LIBRARY_PATH="${env.DYLD_LIBRARY_PATH}""/>
	333	<else>
	334	<property name="ldlpath.arg" value=" "/>
	335	</else>
	336	</if>
[23599]	337	<else>
[23611]	338	<if><bool><isset property="env.LD_LIBRARY_PATH"/></bool>
	339	<property name="ldlpath.arg" value="LD_LIBRARY_PATH="${env.LD_LIBRARY_PATH}""/>
	340	<else>
	341	<property name="ldlpath.arg" value=" "/>
	342	</else>
	343	</if>
	344	</else>
[23599]	345	</if>
	346	</else>
[22868]	347	</if>
[23611]	348	<property name="allargs" value="${cflags.arg} ${cxxflags.arg} ${cppflags.arg} ${ldflags.arg} ${path.arg} ${ldlpath.arg} ${pcpath.arg}"/>
[22868]	349
[22184]	350	<condition property="gs2.opt.args" value= " " else="--disable-mg --disable-mgpp --disable-accentfold --disable-gdbm --disable-sqlite">
	351	<istrue value="${with.jni}"/>
	352	</condition>
	353	<condition property="gs2.compile.target" value="with-jni" else="without-jni">
	354	<istrue value="${with.jni}"/>
	355	</condition>
	356	<condition property="gs2.install.target" value="install-with-jni" else="install-without-jni">
	357	<istrue value="${with.jni}"/>
	358	</condition>
	359	<condition property="gs2.windows.enablejni" value="1" else="0">
	360	<istrue value="${with.jni}"/>
	361	</condition>
[22976]	362	<condition property="gs2.windows.enablemg" value="1" else="0">
	363	<istrue value="${with.jni}"/>
	364	</condition>
	365	<condition property="gs2.windows.enablemgpp" value="1" else="0">
	366	<istrue value="${with.jni}"/>
	367	</condition>
	368	<!-- Should accent folding not also be set here ?? -->
	369	<condition property="gs2.windows.usegdbm" value="1" else="0">
	370	<istrue value="${with.jni}"/>
	371	</condition>
	372	<condition property="gs2.windows.usesqlite" value="1" else="0">
	373	<istrue value="${with.jni}"/>
	374	</condition>
[19931]	375
[15799]	376	<!-- where is search4j tool -->
[20085]	377	<condition property="search4j.exec" value="bin/search4j.exe" else="bin/search4j">
[15799]	378	<isset property="current.os.iswindows"/>
[15136]	379	</condition>
	380
[15799]	381
[15124]	382	<!-- ============= Base dirs for each package and component ============ -->
	383	<property name="src.gsdl3.home" value="${src.home}/org/greenstone/gsdl3"/>
	384	<property name="anttasks.home" value="${src.home}/org/greenstone/anttasks"/>
	385	<property name="gli.home" value="${basedir}/gli"/>
	386	<property name="javagdbm.home" value="${src.packages.home}/javagdbm"/>
	387
[21347]	388	<condition property="common.src.home" value="${basedir}/common-src" else="${gs2build.home}${file.separator}common-src">
[20464]	389	<istrue value="${disable.collection.building}"/>
[19871]	390	</condition>
[19931]	391
	392	<property name="build.src.home" value="${gs2build.home}/build-src"/>
[19871]	393	<property name="gdbm.home" value="${common.src.home}/packages/gdbm"/>
	394	<property name="mg.home" value="${common.src.home}/indexers/mg"/>
	395	<property name="mgpp.home" value="${common.src.home}/indexers/mgpp"/>
	396	<property name="lucene.home" value="${common.src.home}/indexers/lucene-gs"/>
	397
[15799]	398	<!-- ==================== Compilation Control Options ==================== -->
[15124]	399
[15799]	400	<!--
[15124]	401
	402	These properties control option settings on the Javac compiler when it
	403	is invoked using the <javac> task.
	404
	405	compile.debug Should compilation include the debug option?
	406
	407	compile.deprecation Should compilation include the deprecation option?
	408
	409	compile.optimize Should compilation include the optimize option?
	410
[15799]	411	-->
[15124]	412
	413	<property name="compile.debug" value="true"/>
	414	<property name="compile.deprecation" value="true"/>
	415	<property name="compile.optimize" value="true"/>
	416
[15799]	417	<!--
[15124]	418
	419	Rather than relying on the CLASSPATH environment variable, Ant includes
	420	features that makes it easy to dynamically construct the classpath you
	421	need for each compilation. The example below constructs the compile
	422	classpath to include the servlet.jar file, as well as the other components
	423	that Tomcat makes available to web applications automatically, plus anything
	424	that you explicitly added.
	425
[15799]	426	-->
[20079]	427
	428	<!-- All elements that Tomcat 5 exposes to applications -->
	429	<path id="tomcat5">
[20085]	430	<pathelement location="${catalina.home}/common/classes"/>
	431	<fileset dir="${catalina.home}/common/endorsed">
	432	<include name="*.jar"/>
	433	</fileset>
	434	<fileset dir="${catalina.home}/common/lib">
	435	<include name="*.jar"/>
	436	</fileset>
	437	<!-- seems to be empty, but will leave in just in case some people make use of this to customise their install: -->
	438	<pathelement location="${catalina.home}/shared/classes"/>
	439	<fileset dir="${catalina.home}/shared/lib">
	440	<include name="*.jar"/>
	441	</fileset>
[20079]	442	</path>
	443
[25131]	444	<!-- All elements that Tomcat 7 exposes to applications -->
	445	<path id="tomcat7">
[20085]	446	<fileset dir="${catalina.home}/lib">
	447	<include name="*.jar"/>
	448	</fileset>
[20079]	449	</path>
	450
[15124]	451	<path id="compile.classpath">
	452	<!-- Include all jar files and libraries in our jni lib directory -->
	453	<pathelement location="${lib.jni}"/>
	454	<fileset dir="${lib.jni}">
	455	<include name="*.jar"/>
	456	</fileset>
	457	<!-- Include all jar files in our web lib directory -->
	458	<pathelement location="${web.lib}"/>
	459	<fileset dir="${web.lib}">
	460	<include name="*.jar"/>
	461	</fileset>
	462
[18110]	463	<pathelement location="${lib.java}"/>
	464	<fileset dir="${lib.java}">
	465	<include name="*.jar"/>
	466	</fileset>
[15124]	467
	468	<!-- include the jar files from the source packages -->
	469	<!-- mg and mgpp get installed into lib/jni but they may not be there yet
	470	so we add them in by name -->
[22184]	471	<!-- *** is there any way to make this optional, based on ${with.jni}? -->
[15124]	472	<pathelement location="${lib.jni}/mg.jar"/>
	473	<pathelement location="${lib.jni}/mgpp.jar"/>
	474
[20085]	475	<!-- Include all elements that Tomcat exposes to applications -->
	476	<path refid="tomcat${tomcat.version.major}"/>
	477
[15124]	478	</path>
	479
	480	<path id="local.tomcat.classpath">
	481	<!-- explicitly include the jni java wrappers in the classpath -->
	482	<pathelement location="${lib.jni}"/>
	483	<fileset dir="${lib.jni}">
	484	<include name="*.jar"/>
	485	</fileset>
[25095]	486
	487	<pathelement location="${web.lib}"/>
	488	<fileset dir="${web.lib}">
	489	<include name="derby.jar"/>
	490	</fileset>
[15124]	491	</path>
	492
	493	<path id="local.tomcat.path">
	494	<pathelement location="${basedir}/bin/script"/>
	495	<pathelement location="${basedir}/bin"/>
	496	<pathelement location="${lib.jni}"/>
	497	<pathelement path="${env.PATH}"/>
	498	<pathelement path="${env.Path}"/>
	499	<pathelement path="${wn.home}/bin"/>
	500	</path>
	501
	502	<target name="test-setup">
	503	<echo>ant java version=${ant.java.version}</echo>
	504	<echo>is unix : ${current.os.isunix}</echo>
	505	<echo>is mac : ${current.os.ismac}</echo>
	506	<echo>is unixnotmac : ${current.os.isunixnotmac}</echo>
	507	<echo>is windows : ${current.os.iswindows}</echo>
	508	<echo>os.unix: ${os.unix}</echo>
	509	</target>
[20085]	510
[15799]	511	<!-- ==================== Primary and Global Targets ============================= -->
[15124]	512
[19873]	513	<target name="prepare" depends="accept-properties,init,prepare-core,prepare-packages,prepare-common-src,prepare-collection-building,prepare-tomcat,prepare-axis,prepare-web,prepare-collections, prepare-flax"
[15124]	514	description="Use this when you first checkout the code: 'ant prepare install'. This will do some additional subversion checkouts and downloads, so you need to be online to run this.">
	515
	516	<!-- make sure .sh files are executable -->
	517	<chmod dir="${basedir}" perm="ugo+rx"
	518	includes="*.sh"/>
	519	<chmod dir="${basedir}/bin/script" perm="ugo+rx"
	520	includes=".sh,.pl"/>
	521	</target>
[16936]	522
[19871]	523	<!-- install-common-src and install-collection-building are mutually exclusive and either one or the other will be done depending on whether collection building is enabled or not -->
[19878]	524	<target name="install" depends="init,install-common-src,install-collection-building,install-runtime"
[19843]	525	description="Install Greenstone 3. Use this when you first checkout the code: 'ant prepare new-install'."/>
	526
[19931]	527	<target name="install-common-src" depends="init"
	528	description="Install (configure, compile, install) only the common-src package (shared code from Greenstone 2). " >
[19894]	529	<antcall target="configure-common-src"/>
	530	<antcall target="compile-common-src"/>
	531	<antcall target="install-auxiliary-jar-files"/>
	532	<antcall target="install-jni-files"/>
	533	</target>
[19878]	534
[19894]	535	<target name="install-collection-building" depends="init" if="collection.building.enabled"
	536	description="Install (configure, compile, install) the Greenstone 2 collection building package." >
	537	<antcall target="configure-collection-building"/>
[19931]	538	<antcall target="tweak-makefiles" />
[19894]	539	<antcall target="compile-collection-building"/>
	540	</target>
	541
[19878]	542
[20209]	543	<target name="install-runtime" depends="init,configure,configure-packages,configure-core,compile-web,compile-packages,compile-core,compile-classpath-jars"
[19878]	544	description="Install (configure, compile, install) the runtime system. Needs either common-src or collection-building to have been installed first." />
	545
	546	<target name="svnupdate" depends="init,svnupdate-packages,svnupdate-core,svnupdate-common-src,svnupdate-collection-building,svnupdate-web"
[15124]	547	description="Do a `svn update` for all sources. Doesn't recompile the code. You need to be online to run this."/>
	548
	549	<target name="configure" depends="init,configure-tomcat,configure-web"
[23855]	550	description="Configure the installation (not the C++ code). Includes setting up config files. Should be re-run if you change the build.properties file, including if you change the port number."/>
[15124]	551
[20209]	552	<target name="clean" depends="init,clean-packages,clean-core,clean-common-src,clean-collection-building,clean-classpath-jars"
[19878]	553	description="Remove all old compiled code. Includes runtime and collection-building if necessary"/>
[15124]	554
[20209]	555	<target name="distclean" depends="init,distclean-packages,clean-core,distclean-common-src,distclean-collection-building,clean-classpath-jars"
[19878]	556	description="Remove all compiled code and also any Makefiles etc generated during configure-c++. Includes runtime and collection-building as necessary"/>
[15799]	557
[19878]	558	<target name="update" depends="init,svnupdate,clean,install"
	559	description="Update (thru Subversion) all the source (including common-src or collection-building, and runtime), then clean, and re-install. To do this without any SVN updates, run it like 'ant -Dnosvn.mode=yes update'"/>
[15124]	560
[23854]	561
	562	<target name="perl-for-building" depends="init">
	563	<!-- uses perl.path if set in build.properties, otherwise try for
	564	environment variable PERLPATH, and failing that assumes 'perl'
	565	is on environment PATH -->
[23856]	566	<!-- if, outside build.properties, we only set perl.path if we have gs2build/build-src (collection building), then we won't set perl.path in a (flax) binary, since it doesn't have build-src -->
[23857]	567	<if><bool><available file="${gs2build.home}"/></bool>
[23854]	568
	569	<if><bool><not><isset property="perl.path"/></not></bool>
	570
	571	<if>
	572	<bool>
	573	<and>
	574	<isset property="env.PERLPATH"/>
	575	<not><equals arg1="${env.PERLPATH}" arg2=""/></not>
	576	</and>
	577	</bool>
	578	<property name="perl.path" value="${env.PERLPATH}"/>
	579	<else>
	580	<echo>
[23896]	581	Using PATH environment variable to locate Perl.
[23854]	582	</echo>
	583	<exec executable="which" os="${os.unix}" spawn="false" outputproperty="full.perl.path">
	584	<arg value="perl" />
	585	</exec>
	586
[23941]	587	<exec executable="${gs2build.home}/bin/windows/which" os="${os.windows}" spawn="false" outputproperty="full.perl.path">
	588	<arg value="perl" />
	589	</exec>
[23896]	590
[23854]	591	<stringutil string="${full.perl.path}" property="perl.path">
[23896]	592	<replace regex="\/[^\/]*$" replacement="" />
[23854]	593	</stringutil>
[23896]	594	<if><bool><istrue value="${current.os.isunix}"/></bool>
	595
	596	<if><bool><not><equals arg1="${full.perl.path}" arg2="/usr/bin/perl"/></not></bool>
	597	<echo>
[23854]	598	Non-standard location of Perl found: ${full.perl.path}
	599	Set the environment variable PERLPATH or the perl.path property in
	600	build.properties to explicitly control the version of Perl used.
[23896]	601	</echo>
	602	</if>
[23854]	603	</if>
	604	</else>
	605	</if>
	606	</if>
	607
	608	<!-- full.perl.path is for pretty-printing only, e.g. used in target "start" -->
	609	<if><bool><isset property="perl.path"/></bool>
	610	<property name="full.perl.path" value="${perl.path}${file.separator}perl"/>
	611	<else>
	612	<property name="full.perl.path" value="perl (will use the enviroment variable PATH to find this executable)"/>
	613	</else>
	614	</if>
[23857]	615
	616	<!-- gs2build not available, perl.path -->
	617	<else>
	618	<property name="perl.path" value=""/>
	619	</else>
	620	</if>
[23854]	621	</target>
	622
	623	<target name="start" depends="init,configure-web,start-tomcat"
[15124]	624	description="Startup the Tomcat server." >
[15799]	625	<echo>${app.name} (${app.version}) server running using Apache Tomcat and Java</echo>
[16936]	626	<echo>Tomcat: ${catalina.home}</echo>
	627	<echo>Java : ${java.home}</echo>
[23849]	628	<if><bool><available file="${build.src.home}"/></bool>
	629	<echo>Perl : ${full.perl.path}</echo>
	630	</if>
[23936]	631	<if><bool><isset property="install.flax"/></bool>
	632	<property name="url" value="http://${tomcat.server}:${tomcat.port}${app.path}/flax"/>
	633	<else>
	634	<property name="url" value="http://${tomcat.server}:${tomcat.port}${app.path}/"/>
	635	</else>
	636	</if>
	637	<echo>URL : ${url}</echo>
[15799]	638	<!-- assuming that index.html is not needed here -->
[15124]	639	</target>
	640
	641	<target name="stop" depends="init,stop-tomcat"
	642	description="Shutdown the Tomcat server."/>
	643
	644	<target name="restart" description="Shutdown and restart Tomcat" depends="init,stop,start"/>
	645
	646
[15799]	647	<!-- =========== Help targets =================================== -->
[15124]	648
	649	<property name="install-command" value="ant [options] prepare install"/>
	650
	651	<target name="usage" description="Print a help message">
	652	<echo message=" Execute 'ant -projecthelp' for a list of targets."/>
	653	<echo message=" Execute 'ant -help' for Ant help."/>
[23849]	654	<echo>
	655	To install Greenstone3, run '${install-command}'.
	656	There are properties defined in build.properties. The install
	657	process will ask you if these properties are set correctly.
	658	To avoid this prompt, use the '-Dproperties.accepted=yes'
	659	option.
	660	To log the output, use the '-logfile build.log' option.
	661	The README.txt file has more information about the ant targets
	662	and install process.
[15124]	663	</echo>
	664	</target>
	665
	666	<target name="help" depends="usage" description="Print a help message"/>
	667
	668	<target name="debug" depends="init" description="Display all the currently used properties">
	669	<echoproperties/>
	670	</target>
	671
[15799]	672	<!-- ====== initialization and setup targets ================== -->
[15124]	673
	674	<target name="accept-properties" unless="properties.accepted">
	675	<input addproperty="properties.ok" validargs="y,n">The following properties (among others) are being used from a build.properties file found in this directory:
[15799]	676	tomcat.server=${tomcat.server}
	677	tomcat.port=${tomcat.port}
	678	tomcat.installed.path=${tomcat.installed.path} (this is the location of Tomcat's base dir if it is already installed)
	679	proxy.host=${proxy.host}
	680	proxy.port=${proxy.port}
[19878]	681	disable.collection.building=${disable.collection.building}
[19910]	682	If these are not acceptable, please change them and rerun this target. Continue [y/n]?
[15124]	683	</input>
	684	<condition property="do.abort">
	685	<equals arg1="n" arg2="${properties.ok}"/>
	686	</condition>
	687	<fail if="do.abort">Build aborted by user. Please change your properties settings and re-run the target</fail>
	688	</target>
[20085]	689
[15124]	690	<!-- this sets up some initial properties -->
	691	<target name="init">
	692
[20085]	693	<!-- has the gs3-setup script been run?? -->
	694	<condition property="gs3-setup-not-done">
	695	<not>
	696	<isset property="env.GSDL3HOME"/>
	697	</not>
	698	</condition>
	699
[20092]	700	<!--<fail if="gs3-setup-not-done" message="please run 'gs3-setup' (Windows) or 'source gs3-setup.sh' (Linux/Mac) before running this target."/>-->
[20085]	701
[15124]	702	<condition property="java.too.old">
	703	<or>
[16936]	704	<equals arg1="1.1" arg2="${ant.java.version}"/>
	705	<equals arg1="1.2" arg2="${ant.java.version}"/>
	706	<equals arg1="1.3" arg2="${ant.java.version}"/>
[15124]	707	</or>
	708	</condition>
[20208]	709	<fail if="java.too.old" message="You need Java 1.4 or greater to run Greenstone 3"/>
[15124]	710
	711	<available file="${basedir}/gli" property="gli.present"/>
[19878]	712	<available file="${basedir}/common-src" property="common.src.present"/>
[15124]	713	<available file="${basedir}/gs2build" property="gs2build.present"/>
	714
	715	<condition property="tomcat.islocal">
	716	<or>
[16936]	717	<not><isset property="tomcat.installed.path"/></not>
	718	<equals arg1="" arg2="${tomcat.installed.path}"/>
[15124]	719	</or>
	720	</condition>
	721
[15799]	722	<echo>tomcat.port = ${tomcat.port}</echo>
[15124]	723
	724	<condition property="proxy.present">
	725	<and>
[16936]	726	<isset property="proxy.host"/>
	727	<not><equals arg1="" arg2="${proxy.host}"/></not>
[15124]	728	</and>
	729	</condition>
	730
[20235]	731	<!--
[20290]	732	the next block checks if the bundled tomcat is present in the 'packages' directory,
[25131]	733	and checks for the lethal combination of tomcat 7 and java 1.4. Test for
[20290]	734	tomcat6 is based on the presence of a file inserted by greenstone into the tomcat6
	735	download, as there is no other surefire way to check tomcat version under java 1.4
[20235]	736	-->
	737	<condition property="packages.tomcat.ispresent" value="true" else="false">
	738	<available file="packages/tomcat"/>
	739	</condition>
[25131]	740	<condition property="packages.tomcat.istomcat7" value="true" else="false">
	741	<available file="packages/tomcat/tomcat7.txt"/>
[20290]	742	</condition>
[20235]	743	<if>
	744	<bool>
[20290]	745	<and>
	746	<istrue value="${packages.tomcat.ispresent}"/>
[25131]	747	<istrue value="${packages.tomcat.istomcat7}"/>
[20290]	748	<equals arg1="1.4" arg2="${ant.java.version}"/>
	749	</and>
[20235]	750	</bool>
[20290]	751	<fail>Your Java (version 1.4) is too old to work with the bundled Apache Tomcat (version 6). Please upgrade to Java version 1.5 or greater. Alternatively, you may remove the bundled Apache Tomcat from the 'packages' folder and then run 'ant prepare-tomcat'.</fail>
[20235]	752	</if>
	753
[15124]	754	</target>
	755
	756	<target name="setup-proxy" depends="init" if="proxy.present">
	757	<condition property="ask.user">
	758	<or>
[16936]	759	<equals arg1="" arg2="${proxy.user}"/>
	760	<equals arg1="" arg2="${proxy.password}"/>
[15124]	761	</or>
	762	</condition>
[19878]	763
[15124]	764	<getuserandpassword message="Using proxy: ${proxy.host}:${proxy.port}" if="ask.user" username="${proxy.user}" userproperty="proxy.username" pwordproperty="proxy.password"/>
	765	<mysetproxy proxyhost="${proxy.host}" proxyport="${proxy.port}" proxyuser="${proxy.username}" proxypassword="${proxy.password}"/>
	766	</target>
	767
[15799]	768	<!-- ========== Web app Targets ================================ -->
	769
[20089]	770	<target name="prepare-web" depends="init">
[15124]	771	<mkdir dir="${web.home}/applet"/>
	772	<mkdir dir="${web.home}/logs"/>
	773	</target>
	774
[24607]	775	<!-- if we are using java 1.5+, we need the xalan.jar file in web/WEB-INF/lib, but if we are using java 1.4, we can't have it there.
	776	The test for whether we need it assumes we won't be trying to compile GS3 against Java versions less than 1.4. -->
[15124]	777	<target name="configure-java-version" depends="init"
[15139]	778	description="Activates or deactivates some jar libraries as needed depending on your java version">
[15136]	779
[15799]	780	<available property="have.xalan.jar" file="${web.lib}/xalan.jar"/>
[15124]	781	<condition property="need.xalan.jar">
[15799]	782	<or>
[24607]	783	<not><equals arg1="1.4" arg2="${ant.java.version}"/></not>
[15799]	784	</or>
	785	</condition>
[15136]	786
[15799]	787	<!-- if they have xalan.jar but dont need it -->
	788	<if>
	789	<bool>
[16936]	790	<and>
	791	<isset property="have.xalan.jar"/>
	792	<not><isset property="need.xalan.jar"/></not>
	793	</and>
[15799]	794	</bool>
	795	<antcall target="deactivate-xalan-jar"/>
	796	</if>
[15136]	797
[15799]	798	<!-- if they need xalan.jar but dont have it -->
	799	<if>
	800	<bool>
[16936]	801	<and>
	802	<not><isset property="have.xalan.jar"/></not>
	803	<isset property="need.xalan.jar"/>
	804	</and>
[15799]	805	</bool>
	806	<antcall target="activate-xalan-jar"/>
	807	</if>
[15136]	808
[15124]	809	</target>
	810
[15139]	811	<target name="activate-xalan-jar">
[15799]	812	<echo>activating xalan.jar</echo>
[15124]	813	<copy file="${web.lib}/xalan.jar.tmp" tofile="${web.lib}/xalan.jar"/>
[20085]	814	<if>
	815	<bool>
	816	<and>
	817	<isset property="current.os.ismac"/>
	818	<available file="${catalina.home}/common/endorsed" type="dir"/>
	819	</and>
	820	</bool>
	821	<copy file="${web.lib}/xalan.jar.tmp" tofile="${catalina.home}/common/endorsed/xalan.jar"/>
[15799]	822	</if>
[15124]	823	</target>
[15035]	824
[15139]	825	<target name="deactivate-xalan-jar">
[15799]	826	<echo>deactivating xalan.jar</echo>
[15124]	827	<delete file="${web.lib}/xalan.jar"/>
[20089]	828	<!-- should we be deleting common/endorsed/xalan.jar on mac?? -->
[15124]	829	</target>
	830
[15837]	831
[16936]	832	<target name="prepare-collections" depends="init">
	833	<property name="collect.dir" value="${web.home}/sites/localsite/collect"/>
[17008]	834	<property name="index.zip" value="index.zip"/>
[15799]	835
[16936]	836	<echo message="installing collections..."/>
	837	<antcall target="gs2mgdemo-install"/>
	838	<antcall target="gs2mgppdemo-install"/>
	839	<antcall target="gberg-install"/>
[25214]	840	<antcall target="lucene-jdbm-demo-install"/>
[16936]	841	</target>
[15837]	842
[16936]	843	<target name="gs2mgdemo-prepare" if="collect.dir">
	844	<property name="gs2mgdemo.dir" value="${collect.dir}/gs2mgdemo"/>
[15799]	845
[16936]	846	<condition property="gs2mgdemo.present">
	847	<and>
[15837]	848	<available file="${gs2mgdemo.dir}/${index.zip}"/>
[16936]	849	</and>
	850	</condition>
	851	</target>
[15799]	852
[17008]	853	<target name="gs2mgdemo-install" if="gs2mgdemo.present" depends="gs2mgdemo-prepare">
	854	<unzip dest="${gs2mgdemo.dir}" src="${gs2mgdemo.dir}/${index.zip}" />
[16936]	855	<echo>collection gs2mgdemo installed</echo>
	856	</target>
[15799]	857
[16936]	858	<target name="gs2mgppdemo-prepare" if="collect.dir">
	859	<property name="gs2mgppdemo.dir" value="${collect.dir}/gs2mgppdemo"/>
[15837]	860
[16936]	861	<condition property="gs2mgppdemo.present">
	862	<and>
[15837]	863	<available file="${gs2mgppdemo.dir}/${index.zip}"/>
[16936]	864	</and>
	865	</condition>
	866	</target>
[15799]	867
[16936]	868	<target name="gs2mgppdemo-install" if="gs2mgppdemo.present" depends="gs2mgppdemo-prepare">
[17008]	869	<unzip dest="${gs2mgppdemo.dir}" src="${gs2mgppdemo.dir}/${index.zip}" />
[16936]	870	<echo>collection gs2mgppdemo installed</echo>
	871	</target>
[15799]	872
[16936]	873	<target name="gberg-prepare" if="collect.dir">
	874	<property name="gberg.dir" value="${collect.dir}/gberg"/>
[17008]	875	<available file="${gberg.dir}/index/${index.zip}" property="gberg.present"/>
[16936]	876	</target>
[15799]	877
[16936]	878	<target name="gberg-install" if="gberg.present" depends="gberg-prepare">
[19878]	879	<unzip dest="${gberg.dir}/index" src="${gberg.dir}/index/${index.zip}"/>
[16936]	880	<echo>collection gberg installed</echo>
	881	</target>
[15799]	882
[25214]	883	<target name="lucene-jdbm-demo-prepare" if="collect.dir">
	884	<property name="lucene-jdbm-demo.dir" value="${collect.dir}/lucene-jdbm-demo"/>
	885	<available file="${lucene-jdbm-demo.dir}/index/${index.zip}" property="lucene-jdbm-demo.present"/>
	886	</target>
	887
	888	<target name="lucene-jdbm-demo-install" if="lucene-jdbm-demo.present" depends="lucene-jdbm-demo-prepare">
	889	<unzip dest="${lucene-jdbm-demo.dir}/index" src="${lucene-jdbm-demo.dir}/index/${index.zip}"/>
	890	<echo>collection lucene-jdbm-demo installed</echo>
	891	</target>
	892
[23854]	893	<target name="configure-web" depends="init,perl-for-building"
[15124]	894	description="Configure only the web app config files">
	895	<!-- we want a unix path in the global.properties file -->
	896	<pathconvert targetos="unix" property="src.gsdl3.home.unix">
	897	<path path="${web.home}"/>
	898	</pathconvert>
[24868]	899	<stringutil string="${perl.path}" property="escaped.perl.path">
	900	<replace regex="\\" replacement="\\\\" />
	901	</stringutil>
	902
[15124]	903	<filter token="gsdl3home" value="${src.gsdl3.home.unix}"/>
	904	<filter token="gsdl3version" value="${app.version}"/>
	905	<filter token="tomcat.server" value="${tomcat.server}"/>
	906	<filter token="tomcat.port" value="${tomcat.port}"/>
[24868]	907	<filter token="perlpath" value="${escaped.perl.path}"/>
[15124]	908	<copy file="${basedir}/resources/java/global.properties.in" tofile="${web.classes}/global.properties" filtering="true" overwrite="true"/>
	909	<copy file="${basedir}/resources/java/log4j.properties.in" tofile="${web.classes}/log4j.properties" filtering="true" overwrite="true"/>
	910	<chmod file="${web.classes}/global.properties" perm="600"/>
	911	<chmod file="${web.classes}/log4j.properties" perm="600"/>
	912	</target>
	913
	914	<target name="compile-web" depends="init">
	915	<javac srcdir="${web.classes}"
	916	destdir="${web.classes}"
	917	debug="${compile.debug}"
	918	deprecation="${compile.deprecation}"
	919	optimize="${compile.optimize}">
[16936]	920	<classpath><path refid="compile.classpath"/></classpath>
[15124]	921	</javac>
	922	</target>
	923
[20209]	924	<target name="compile-classpath-jars" depends="init">
	925	<if><bool><available file="admin/cp.mf"/></bool>
	926	<jar destfile="admin/cp.jar" manifest="admin/cp.mf"/>
	927	</if>
	928	<if><bool><available file="${lib.java}/cp.mf"/></bool>
	929	<jar destfile="${lib.java}/cp.jar" manifest="${lib.java}/cp.mf"/>
	930	</if>
	931	<if><bool><available file="${lib.jni}/cp.mf"/></bool>
	932	<jar destfile="${lib.jni}/cp.jar" manifest="${lib.jni}/cp.mf"/>
	933	</if>
	934	<if><bool><available file="${web.lib}/cp.mf"/></bool>
	935	<jar destfile="${web.lib}/cp.jar" manifest="${web.lib}/cp.mf"/>
	936	</if>
	937	<jar destfile="cp.jar">
	938	<manifest>
[20211]	939	<attribute name="Class-Path" value="server.jar admin/cp.jar lib/java/cp.jar lib/jni/cp.jar web/WEB-INF/lib/cp.jar"/>
[20209]	940	</manifest>
	941	</jar>
	942	</target>
	943
	944	<target name="clean-classpath-jars" depends="init">
	945	<delete file="admin/cp.jar"/>
	946	<delete file="${lib.java}/cp.jar"/>
	947	<delete file="${lib.jni}/cp.jar"/>
	948	<delete file="${web.lib}/cp.jar"/>
	949	<delete file="cp.jar"/>
	950	</target>
	951
	952
[15799]	953	<target name="svnupdate-web" unless="nosvn.mode">
[20930]	954	<exec executable="svn">
	955	<arg value="update"/>
	956	<arg value="${web.home}"/>
	957	<arg value="-r"/><arg value="${branch.revision}"/>
	958	</exec>
[15799]	959	</target>
[15124]	960
	961	<target name="update-web" depends="init,svnupdate-web,configure-web"
	962	description="update only the web stuff (config files)"/>
	963
[15799]	964	<!-- ======================= Tomcat Targets ========================== -->
[15124]	965
	966	<!-- this target downloads and installs Tomcat -->
[25131]	967	<!-- we download tomcat (version 7 for Java 1.5 and later, version 5 for Java 1.4 plus the 1.4 compatibility package). -->
[20089]	968	<target name="prepare-tomcat" depends="init,setup-proxy" if="tomcat.islocal"
[25131]	969	description="downloads the appropriate version of Tomcat (Tomcat 5 if using Java 1.4, Tomcat 7 if using Java 1.5 or higher). If you want to change which version of Java you are using between 1.4 and 1.5/7 then you need to run prepare-tomcat">
	970	<if>
[16951]	971	<bool>
	972	<not><available file="${packages.home}/tomcat/.flagfile"/></not>
	973	</bool>
	974
	975	<!-- check that packages dir is there -->
	976	<mkdir dir="${packages.home}"/>
	977	<get src="http://www.greenstone.org/gs3files/${tomcat.version}.zip"
	978	dest="${packages.home}/${tomcat.version}.zip"
	979	usetimestamp="true"/>
	980	<unzip src="${packages.home}/${tomcat.version}.zip"
	981	dest="${packages.home}"/>
[20085]	982
	983	<!-- If we are using Java 1.4, we'd be using tomcat 5.5 in which case
	984	we would need to have the tomcat compat package to work with Java 1.4-->
	985	<if>
	986	<bool><equals arg1="1.4" arg2="${ant.java.version}"/></bool>
	987	<get src="http://www.greenstone.org/gs3files/${tomcat.version}-compat.zip"
	988	dest="${packages.home}/${tomcat.version}-compat.zip"
	989	usetimestamp="true"/>
	990	<unzip src="${packages.home}/${tomcat.version}-compat.zip"
	991	dest="${packages.home}"/>
	992	</if>
	993
[16951]	994	<!-- delete any existing tomcat -->
	995	<delete dir="${packages.home}/tomcat"/>
	996	<move todir="${packages.home}/tomcat">
	997	<fileset dir="${packages.home}/${tomcat.version}"/>
	998	</move>
[25133]	999	<!--
[16951]	1000	<copy file="${basedir}/resources/tomcat/setclasspath.bat"
	1001	tofile="${packages.home}/tomcat/bin/setclasspath.bat"
	1002	overwrite="true"/>
	1003	<copy file="${basedir}/resources/tomcat/setclasspath.sh"
	1004	tofile="${packages.home}/tomcat/bin/setclasspath.sh"
	1005	overwrite="true"/>
[25133]	1006	-->
[16951]	1007	<!-- make sure we have execute permission for the .sh files -->
	1008	<chmod dir="${packages.home}/tomcat/bin" perm="ugo+rx"
	1009	includes="*.sh"/>
	1010
	1011	<echo file="${packages.home}/tomcat/.flagfile">
	1012	the timestamp of this file is the time that tomcat was extracted from the zip files.
	1013	it is used to figure out whether the files need to be refreshed or not in `ant prepare-tomcat`
	1014	</echo>
	1015
[20089]	1016	<!-- this is not strictly a prepare tomcat thing, but if one changes
	1017	Java, then they need to change tomcat as well, so might as well call
	1018	it here -->
	1019	<antcall target="configure-java-version"/>
[16951]	1020	<else>
	1021	<echo>Tomcat has been prepared, will not prepare</echo>
	1022	<echo>Delete ${packages.home}/tomcat/.flagfile to force refresh</echo>
	1023	</else>
	1024
	1025	</if>
	1026
[15124]	1027	</target>
	1028
	1029	<target name="configure-tomcat" depends="init,configure-tomcat-local,configure-tomcat-external"/>
	1030
	1031	<target name="configure-tomcat-local" depends="init" if="tomcat.islocal">
	1032	<!-- re-setup the server.xml file -->
[20079]	1033	<copy file="${basedir}/resources/tomcat/server_tomcat${tomcat.version.major}.xml"
	1034	tofile="${packages.home}/tomcat/conf/server.xml" overwrite="true">
[15124]	1035	<filterset>
[16936]	1036	<filter token="port" value="${tomcat.port}"/>
	1037	<filter token="shutdown-port" value="${tomcat.shutdown.port}"/>
[15124]	1038	</filterset>
	1039	</copy>
	1040	<!-- set up the greenstone3 context -->
	1041	<copy file="${basedir}/resources/tomcat/greenstone3.xml" tofile="${packages.home}/tomcat/conf/Catalina/localhost/greenstone3.xml" overwrite="true">
	1042	<filterset>
[16936]	1043	<filter token="gsdl3webhome" value="${web.home}"/>
[22320]	1044	<filter token="privilegedattribute" value ="${privileged.attribute}"/>
[15124]	1045	</filterset>
	1046	</copy>
	1047	</target>
	1048
	1049	<target name="configure-tomcat-external" depends="init" unless="tomcat.islocal">
	1050	<!-- re-setup the server.xml file -->
	1051	<!-- need to edit the config file, or do we get the user to do this???-->
	1052	</target>
[22551]	1053
[23854]	1054
	1055
[22551]	1056	<!-- Another way: http://ptrthomas.wordpress.com/2006/03/25/how-to-start-and-stop-tomcat-from-ant/ -->
[20089]	1057	<target name="start-tomcat" description="Startup only Tomcat" depends="init" if="tomcat.islocal">
[15799]	1058	<property name="tomcat.classpath" refid="local.tomcat.classpath"/>
[15124]	1059	<property name="tomcat.path" refid="local.tomcat.path"/>
	1060	<property name="catalina.opts" value="-Djava.util.prefs.syncInterval=2000000 -DGSDL3HOME=$GSDL3HOME -DGSDLOS=$GSDLOS -DPATH=$PATH -Xmx400M"/>
[25095]	1061
	1062	<echo file="${catalina.home}/bin/setenv.bat">set CLASSPATH=${tomcat.classpath}</echo>
	1063	<echo file="${catalina.home}/bin/setenv.sh">export CLASSPATH=${tomcat.classpath}</echo>
	1064
[21351]	1065	<exec executable="${catalina.home}/bin/startup.sh" os="${os.unix}" dir="${catalina.home}/bin" spawn="false">
[15124]	1066	<!--<env key="GSDLOS" value="linux"/> do we need this?? -->
	1067	<env key="GSDL3HOME" value="${basedir}"/>
	1068	<env key="PATH" path="${tomcat.path}"/>
	1069	<env key="CATALINA_OPTS" value="${catalina.opts}"/>
	1070	<env key="CATALINA_HOME" value="${catalina.home}"/>
	1071	<env key="CLASSPATH" path="${tomcat.classpath}"/>
	1072	<env key="LD_LIBRARY_PATH" path="${env.LD_LIBRARY_PATH}:${lib.jni}"/>
[22184]	1073	<env key="DYLD_LIBRARY_PATH" path="${env.DYLD_LIBRARY_PATH}:${lib.jni}:${gdbm.home}/lib"/> <!-- for mac os --> <!-- need gdbm here these days ??-->
[15124]	1074	<env key="WNHOME" path="${wn.home}"/>
	1075	</exec>
[25095]	1076	<exec executable="${catalina.home}/bin/startup.bat" os="${os.windows}" dir="${catalina.home}/bin" spawn="false">
[15124]	1077	<env key="GSDLOS" value="windows"/>
	1078	<env key="GSDL3HOME" value="${basedir}"/>
	1079	<env key="Path" path="${tomcat.path}"/>
	1080	<env key="PATH" path="${tomcat.path}"/>
	1081	<env key="CATALINA_OPTS" value="${catalina.opts}"/>
[16628]	1082	<env key="CATALINA_HOME" value="${catalina.home}"/>
[15124]	1083	<env key="CLASSPATH" path="${tomcat.classpath}"/>
	1084	</exec>
	1085	<!-- wait for the server to startup in case other targets need it running -->
	1086	<waitfor maxwait="5" maxwaitunit="second">
	1087	<and>
[16936]	1088	<socket server="${tomcat.server}" port="${tomcat.port}"/>
	1089	<http url="http://${tomcat.server}:${tomcat.port}${app.path}/index.html"/>
[15124]	1090	</and>
	1091	</waitfor>
	1092	</target>
	1093
[22551]	1094	<!--ant task http: http://www.jajakarta.org/ant/ant-1.6.1/docs/ja/manual/api/org/apache/tools/ant/taskdefs/condition/Http.html-->
	1095	<target name="reconfigure" description="Reconfigure the message router">
	1096	<waitfor maxwait="5" maxwaitunit="second">
	1097	<http url="http://${tomcat.server}:${tomcat.port}${app.path}${server.default.servlet}?a=s&sa=c"/>
	1098	</waitfor>
	1099	</target>
	1100
	1101	<!--Command-line args to Ant: http://www.jguru.com/faq/view.jsp?EID=471794-->
	1102	<target name="reconfigure-collection" description="Reconfigure the collection">
	1103	<waitfor maxwait="5" maxwaitunit="second">
	1104	<http url="http://${tomcat.server}:${tomcat.port}${app.path}${server.default.servlet}?a=s&sa=c&sc=${collection}"/>
	1105	</waitfor>
	1106	</target>
	1107
[15124]	1108	<!-- windows: do we want to launch a webrowser?? -->
[25418]	1109	<!-- shouldn't this test whether anything is running first?
	1110	It's safer to always attempt to stop tomcat: that way we won't be dependent on the right time
	1111	to check whether the server is stopped or still running before attempting to start again.
	1112	This target, which was recently called force-stop-tomcat for a while but is back to being
	1113	called stop-tomcat, now hides the Java exception output that appears whenever tomcat is already
	1114	stopped as happens when stop-tomcat is called consecutively. -->
[25420]	1115	<target name="force-stop-tomcat" description="Shutdown only Tomcat" depends="init" if="tomcat.islocal">
[21351]	1116	<exec executable="${catalina.home}/bin/shutdown.sh" os="${os.unix}" dir="${catalina.home}/bin" spawn="false">
[15124]	1117	<env key="CATALINA_HOME" value="${catalina.home}"/>
[25418]	1118	<arg line=">/dev/null 2>&1"/>
[15124]	1119	</exec>
[21351]	1120	<exec executable="${catalina.home}/bin/shutdown.bat" os="${os.windows}" dir="${catalina.home}/bin" spawn="false">
[16628]	1121	<env key="CATALINA_HOME" value="${catalina.home}"/>
[25418]	1122	<arg line=">nul 2>&1"/>
[16628]	1123	</exec>
[25420]	1124	<!--<antcall target="wait-until-tomcat-stopped"/>
[15124]	1125	</target>
	1126
[25420]	1127	<target name="wait-until-tomcat-stopped">-->
	1128	<echo>Waiting for the server to shutdown...</echo>
	1129	<waitfor maxwait="15" maxwaitunit="second" checkevery="1" checkeveryunit="second" timeoutproperty="tomcat.timedout">
	1130	<socket server="${tomcat.server}" port="${tomcat.port}"/>
	1131	</waitfor>
	1132
	1133	<if>
	1134	<bool>
	1135	<isset property="${tomcat.timedout}"/>
	1136	</bool>
	1137	<property name="tomcat.isrunning" value="true"/>
	1138	<echo>WARNING: Checked socket 15 times, but port ${tomcat.port} still busy. Going to try to continue anyway...</echo>
	1139	<else>
	1140	<echo>Tomcat is stopped.</echo>
	1141	<property name="tomcat.isrunning" value="false"/>
	1142	</else>
	1143	</if>
	1144	</target>
	1145
[25418]	1146	<!-- Can also try the "socket" condition in place of the "http" condition
	1147	And also use a <waitfor> in place of <condition>, such as:
	1148	<waitfor maxwait="5" maxwaitunit="second" timeoutproperty="tomcat.isstopped"><http url="..."/></waitfor>
[25420]	1149	The http URL resolves to host:port/greenstone3
	1150	Condition uses <http/> rather than <socket/> for testing, since if the server was stopped, the socket
	1151	might still be in use for some moments. We test the URL with the http condition since it's likelier to
	1152	fail sooner if the server has indeed been stopped. -->
[25418]	1153	<target name="check-tomcat-running">
	1154	<condition property="tomcat.isrunning">
	1155	<http url="http://${tomcat.server}:${tomcat.port}${app.path}"/>
	1156	</condition>
[25321]	1157	</target>
	1158
[25437]	1159	<target name="stop-tomcat" description="Shutdown only Tomcat if running"><!-- depends="check-tomcat-running" if="tomcat.isrunning">-->
[25321]	1160	<antcall target="force-stop-tomcat"/>
[25420]	1161	</target>
[25321]	1162
[15124]	1163	<target name="restart-tomcat" description="Shutdown and restart only Tomcat" depends="init,stop-tomcat,start-tomcat"/>
	1164
	1165	<target name="setup-catalina-ant-tasks">
	1166	<!-- Configure the custom Ant tasks for the Tomcat Manager application -->
	1167	<taskdef name="deploy" classname="org.apache.catalina.ant.DeployTask"
	1168	classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
	1169	<taskdef name="list" classname="org.apache.catalina.ant.ListTask"
	1170	classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
	1171	<taskdef name="reload" classname="org.apache.catalina.ant.ReloadTask"
	1172	classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
	1173	<taskdef name="resources" classname="org.apache.catalina.ant.ResourcesTask"
	1174	classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
	1175	<taskdef name="roles" classname="org.apache.catalina.ant.RolesTask"
	1176	classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
	1177	<taskdef name="start" classname="org.apache.catalina.ant.StartTask"
	1178	classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
	1179	<taskdef name="stop" classname="org.apache.catalina.ant.StopTask"
	1180	classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
	1181	<taskdef name="undeploy" classname="org.apache.catalina.ant.UndeployTask"
	1182	classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
	1183	</target>
	1184
	1185
[15799]	1186	<!-- ======================= ant Targets ============================ -->
[15124]	1187	<target name="prepare-ant" depends="init">
[16951]	1188	<if>
	1189	<bool>
	1190	<not><available file="${packages.home}/ant/.flagfile"/></not>
	1191	</bool>
	1192
	1193	<get src="http://www.greenstone.org/gs3files/apache-ant-1.7.0-bin.zip"
	1194	dest="${packages.home}/apache-ant-1.7.0-bin.zip"
	1195	usetimestamp="true"/>
	1196	<unzip src="${packages.home}/apache-ant-1.7.0-bin.zip"
	1197	dest="${packages.home}"/>
	1198	<move todir="${packages.home}/ant">
	1199	<fileset dir="${packages.home}/apache-ant-1.7.0"/>
	1200	</move>
	1201	<echo file="${packages.home}/ant/.flagfile">
	1202	the timestamp of this file is the time that ant was extracted from the zip files.
	1203	it is used to figure out whether the files need to be refreshed or not in `ant prepare-ant`
	1204	</echo>
	1205
	1206	<else>
	1207	<echo>Ant has been prepared, will not prepare</echo>
	1208	<echo>Delete ${packages.home}/ant/.flagfile to force refresh</echo>
	1209	</else>
	1210
	1211	</if>
[15124]	1212	</target>
	1213
[25338]	1214	<!-- ======================= Admin Targets ============================ -->
	1215
	1216	<!-- This target won't work with Eclipse because the SecureInputHandler used below conflicts with it.
	1217	See http://www.dcepler.net/post.cfm/hiding-password-input-in-ant
	1218	But you can do: echo mypassword \| ant config-admin -->
	1219	<target name="config-admin" description="Reset admin password">
	1220	<input addproperty="admin.password" defaultvalue="admin" message="New admin password (3-8 characters):>">
	1221	<handler classname="org.apache.tools.ant.input.SecureInputHandler" /> <!-- password won't be visible on screen -->
	1222	</input>
[25343]	1223	<!--<echo>PWD: ${admin.password}</echo>-->
[25338]	1224	<antcall target="update-userdb">
	1225	<param name="user.username" value="admin"/>
	1226	<param name="user.password" value="${admin.password}"/>
	1227	<param name="user.groups" value=""/>
	1228	<param name="user.status" value=""/>
	1229	<param name="user.comment" value="Password updated."/>
	1230	<param name="user.email" value=""/>
	1231	</antcall>
	1232	</target>
	1233
	1234	<target name="config-user" description="Add or modify users" depends="get-user-data,update-userdb"/>
	1235
	1236	<target name="get-user-data" description="Get user details">
	1237	<input addproperty="user.username" message="Username:>"/>
	1238	<input addproperty="user.password" defaultvalue="" message="Password (3-8 characters):>">
	1239	<handler classname="org.apache.tools.ant.input.SecureInputHandler" /> <!-- password won't be visible on screen -->
	1240	</input>
	1241	<input addproperty="user.groups" defaultvalue="" message="Groups (comma-separated list):>"/>
	1242	<input addproperty="user.status" defaultvalue="true" message="Enabled (true/false):>"/>
	1243	<input addproperty="user.comment" defaultvalue="" message="Comment:>"/>
	1244	<input addproperty="user.email" defaultvalue="" message="Email:>"/>
	1245	</target>
	1246
	1247	<!-- This target won't work with Eclipse because the SecureInputHandler used below conflicts with it.
	1248	See http://www.dcepler.net/post.cfm/hiding-password-input-in-ant
	1249	But you can do: echo mypassword \| ant config-admin -->
[25418]	1250	<target name="update-userdb" description="Add or modify users" depends="check-tomcat-running">
	1251
	1252	<!-- stop tomcat if running, since derby db is embedded and only allows connections from one jvm instance at a time
	1253	See http://db.apache.org/derby/papers/DerbyTut/embedded_intro.html
	1254	The ${tomcat.isrunning} property is set by the depends-target "check-tomcat-running" -->
[25338]	1255	<if>
	1256	<bool>
	1257	<istrue value="${tomcat.isrunning}"/>
	1258	</bool>
[25418]	1259	<antcall target="stop-tomcat"/>
[25338]	1260	</if>
	1261
	1262	<!--<echo>${admin.password}</echo>--> <!-- for testing -->
	1263	<java classname="org.greenstone.gsdl3.util.ModifyUsersDB">
	1264	<classpath refid="compile.classpath"/> <!--for ${web.lib}/gsdl3.jar and supporting files-->
	1265	<arg file="${web.home}/sites/localsite/etc/usersDB"/>
	1266	<arg value="${user.username}"/>
	1267	<arg value="password=${user.password}"/>
	1268	<arg value="groups=${user.groups}"/>
	1269	<arg value="status=${user.status}"/>
	1270	<arg value="comment=${user.comment}"/>
	1271	<arg value="email=${user.email}"/>
	1272	</java>
	1273
	1274	<!-- run tomcat again if it used to be running -->
	1275	<if>
	1276	<bool>
	1277	<istrue value="${tomcat.isrunning}"/>
	1278	</bool>
	1279	<antcall target="start-tomcat"/>
	1280	</if>
	1281	</target>
	1282
	1283
[20079]	1284	<!-- ======================= Axis Targets ============================ -->
	1285
[15124]	1286	<target name="prepare-axis" depends="init">
[16951]	1287
	1288	<if>
	1289	<bool>
	1290	<not><available file="${packages.home}/axis/.flagfile"/></not>
	1291	</bool>
	1292
	1293	<get src="http://www.greenstone.org/gs3files/${axis.zip.version}"
	1294	dest="${packages.home}/${axis.zip.version}"
	1295	usetimestamp="true"/>
	1296	<unzip src="${packages.home}/${axis.zip.version}"
	1297	dest="${packages.home}"/>
	1298	<move todir="${packages.home}/axis">
	1299	<fileset dir="${packages.home}/${axis.dir.version}"/>
	1300	</move>
	1301	<!-- install axis into greenstone web app -->
	1302	<copy todir="${web.lib}">
	1303	<fileset dir="${packages.home}/axis/webapps/axis/WEB-INF/lib">
	1304	<include name="*.jar"/>
	1305	</fileset>
	1306	</copy>
	1307	<copy todir="${web.home}">
	1308	<fileset dir="${packages.home}/axis/webapps/axis/">
	1309	<include name="*.jsp"/>
	1310	<include name="*.jws"/>
	1311	</fileset>
	1312	</copy>
	1313	<copy tofile="${web.home}/axis.html" file="${packages.home}/axis/webapps/axis/index.html"/>
	1314	<copy todir="${web.classes}">
	1315	<fileset dir="${packages.home}/axis/webapps/axis/WEB-INF/classes">
	1316	<include name="*.properties"/>
	1317	</fileset>
	1318	</copy>
	1319	<echo file="${packages.home}/axis/.flagfile">
	1320	the timestamp of this file is the time that axis was extracted from the zip files.
	1321	it is used to figure out whether the files need to be refreshed or not in `ant prepare-axis`
	1322	</echo>
	1323
	1324	<else>
	1325	<echo>Axis has been prepared, will not prepare</echo>
	1326	<echo>Delete ${packages.home}/axis/.flagfile to force refresh</echo>
	1327	</else>
	1328
	1329	</if>
[15124]	1330	</target>
	1331
[15229]	1332	<target name="soap-deploy-site" depends="init,get-sitename,get-siteuri,get-webservices,create-deployment-files,deploy-site"
[15124]	1333	description="Deploy a SOAP web service for a local Greenstone site. Tomcat must be running for this to work."/>
[15799]	1334
	1335	<target name="deploy-site">
[15124]	1336	<java classname="org.apache.axis.client.AdminClient">
	1337	<classpath refid="compile.classpath"/>
	1338	<arg value="-l"/>
	1339	<arg value="http://${tomcat.server}:${tomcat.port}${app.path}/servlet/AxisServlet"/>
[15229]	1340	<arg file="${basedir}/resources/soap/deploy.wsdd"/>
	1341	</java>
	1342	<delete file="${basedir}/resources/soap/deploy.wsdd"/> <!--clean up, no longer used-->
[15124]	1343	</target>
	1344
[15229]	1345	<target name="soap-undeploy-site" depends="get-undeploy-service-name"
[15124]	1346	description="Undeploy a SOAP web service for a local Greenstone site. Tomcat must be running for this to work.">
[15229]	1347	<filter token="servicesname" value="${axis.undeploy.servicename}"/>
	1348	<copy file="${basedir}/resources/soap/undeploy-site.wsdd.template"
	1349	tofile="${basedir}/resources/soap/undeploy.wsdd"
	1350	filtering="true"
	1351	overwrite="true"/>
[15124]	1352	<java classname="org.apache.axis.client.AdminClient">
	1353	<classpath refid="compile.classpath"/>
	1354	<arg value="-l"/>
	1355	<arg value="http://${tomcat.server}:${tomcat.port}${app.path}/servlet/AxisServlet"/>
[15229]	1356	<arg file="${basedir}/resources/soap/undeploy.wsdd"/>
[15124]	1357	</java>
[15229]	1358	<delete file="${basedir}/resources/soap/undeploy.wsdd"/> <!--clean up, no longer used-->
[15799]	1359	</target>
[15124]	1360
[16936]	1361	<!-- this target used to deploy the default web service SOAPServer (base.webservice.name) on the localsite server
	1362	with the default servicename of localsite-->
[15124]	1363	<target name="deploy-localsite" depends="init"
	1364	description="Deploy the SOAP server for localsite. Will start and stop Tomcat.">
	1365	<antcall target="start-tomcat"/>
[15235]	1366	<echo>Deploying ${base.webservice.name} web services for localsite under service name: localsite</echo>
[15229]	1367	<antcall target="create-deployment-files">
	1368	<param name="axis.sitename" value="localsite"/>
[15235]	1369	<param name="axis.servicesname" value="${base.webservice.name}"/>
[15229]	1370	<param name="axis.siteuri" value="localsite"/>
	1371	</antcall>
[15124]	1372	<antcall target="deploy-site">
	1373	<param name="axis.sitename" value="localsite"/>
[15235]	1374	<param name="axis.servicesname" value="${base.webservice.name}"/>
[15229]	1375	<param name="axis.siteuri" value="localsite"/>
[15124]	1376	</antcall>
[15369]	1377	<echo>The Greenstone server has been started up. If you do not want it running, please type: ant stop.</echo>
[15124]	1378	</target>
[15799]	1379
[16936]	1380	<target name="get-sitename" unless="axis.sitename">
[15229]	1381	<input addproperty="axis.sitename" defaultvalue="localsite">What site do you want to deploy services for?
[15235]	1382	Press Enter for default:localsite</input>
[15124]	1383	</target>
	1384
[15229]	1385	<target name="get-undeploy-service-name" unless="axis.undeploy.servicename">
	1386	<input addproperty="axis.undeploy.servicename" defaultvalue="localsite">Please enter the full name of the service you wish to undeploy.
	1387	To find out which web services you've got deployed, point your browser to http://HOST:PORT/greenstone3/services
[20209]	1388	Or press Enter for undeploying the default:localsite /></input>
[15229]	1389	<echo>Name of service to undeploy: ${axis.undeploy.servicename}</echo>
[15124]	1390	</target>
	1391
[15229]	1392	<target name="get-webservices" unless="axis.servicesname">
[15235]	1393	<input addproperty="axis.servicesname" defaultvalue="${base.webservice.name}">Which set of web services do you want to deploy?
[15229]	1394	Choose from: ${web.services.list}
[20209]	1395	Or press Enter for default:${base.webservice.name} /></input>
[15229]	1396	<echo>${axis.servicesname}</echo>
	1397	</target>
	1398
	1399	<target name="get-siteuri" depends="get-sitename,get-webservices" unless="axis.siteuri">
[15235]	1400	<input addproperty="axis.siteuri" defaultvalue="${axis.servicesname}${axis.sitename}">What name do you want the service to have? (Press Enter for default:${axis.servicesname}${axis.sitename})</input>
[15229]	1401	<echo>Site: ${axis.sitename}, services: ${axis.servicesname}, servicesname: ${axis.siteuri}</echo>
	1402	</target>
	1403
	1404	<target name="set-soapmethod" description="Determines whether the service in the wsdd should have the style attribute set to message or the provider attribute set to java:RPC" if="axis.servicesname">
	1405	<condition property="soap.method" value="provider='java:MSG' style='message' use='literal'">
[15235]	1406	<equals arg1="${axis.servicesname}" arg2="${base.webservice.name}"/>
[15124]	1407	</condition>
[15229]	1408
	1409	<!--everything else defaults to java:RPC at present-->
	1410	<condition property="soap.method" value="provider='java:RPC'">
	1411	<not>
[15235]	1412	<equals arg1="${axis.servicesname}" arg2="${base.webservice.name}"/>
[15229]	1413	</not>
	1414	</condition>
[16936]	1415	</target>
[15799]	1416
[16936]	1417	<target name="create-deployment-files" depends="set-soapmethod" if="axis.sitename">
[15124]	1418	<filter token="sitename" value="${axis.sitename}"/>
	1419	<filter token="siteuri" value="${axis.siteuri}"/>
[15229]	1420	<filter token="servicesname" value="${axis.servicesname}"/>
	1421	<filter token="soapmethod" value="${soap.method}"/>
[15124]	1422	<copy file="${basedir}/resources/soap/site.wsdd.template"
[15229]	1423	tofile="${basedir}/resources/soap/deploy.wsdd"
	1424	filtering="true"
	1425	overwrite="true"/>
[15124]	1426	<!-- create the java files and compile them -->
[15229]	1427	<copy file="${basedir}/resources/java/${axis.servicesname}.java.in"
	1428	tofile="${src.gsdl3.home}/${axis.servicesname}${axis.sitename}.java"
	1429	filtering="true"
	1430	overwrite="true"/>
[15124]	1431	<mkdir dir="${build.home}"/>
	1432	<javac srcdir="${src.home}"
	1433	destdir="${build.home}"
	1434	debug="${compile.debug}"
	1435	deprecation="${compile.deprecation}"
	1436	optimize="${compile.optimize}">
	1437	<classpath refid="compile.classpath"/>
[15229]	1438	<include name="org/greenstone/gsdl3/${axis.servicesname}${axis.sitename}.java" />
[15124]	1439	</javac>
	1440	<mkdir dir="${web.classes}/org/greenstone/gsdl3"/>
[15799]	1441	<copy file="${build.home}/org/greenstone/gsdl3/${axis.servicesname}${axis.sitename}.class"
	1442	tofile="${web.classes}/org/greenstone/gsdl3/${axis.servicesname}${axis.sitename}.class"
	1443	overwrite="true" />
[15124]	1444	</target>
[15799]	1445
[15124]	1446
[15799]	1447	<!-- ====================== Core targets ============================== -->
	1448	<!-- core targets refer to the core gsdl3 java src -->
[15124]	1449
[19878]	1450	<target name="prepare-core"/>
[15124]	1451
	1452	<target name="configure-core"/>
	1453
	1454	<target name="update-core" depends="init,svnupdate-core,clean-core,compile-core"
	1455	description="Update only the Greenstone core" />
	1456
[15799]	1457	<target name="svnupdate-core" unless="nosvn.mode">
[20930]	1458	<exec executable="svn">
	1459	<arg value="update"/>
	1460	<arg value="${basedir}"/>
	1461	<arg value="-r"/><arg value="${branch.revision}"/>
	1462	</exec>
[15124]	1463	</target>
	1464
	1465	<target name="clean-core"
	1466	description="Clean only the Greenstone core">
[19878]	1467	<!-- should this delete the gsdl3.jar from web/WEB-INF?? -->
[15124]	1468	<delete dir="${build.home}"/>
	1469	</target>
	1470
[15799]	1471	<target name="compile-core" depends="init"
[15124]	1472	description="Compile only the Greenstone core">
	1473	<mkdir dir="${build.home}"/>
[25131]	1474
[23803]	1475	<if><bool><isset property="with.jni"/></bool>
	1476	<javac srcdir="${src.home}"
	1477	destdir="${build.home}"
	1478	debug="${compile.debug}"
	1479	deprecation="${compile.deprecation}"
	1480	optimize="${compile.optimize}">
	1481	<classpath>
	1482	<path refid="compile.classpath"/>
	1483	</classpath>
	1484	</javac>
	1485	<else>
	1486	<property name="gsprefix" value=""/>
	1487	<javac srcdir="${src.home}"
	1488	destdir="${build.home}"
	1489	debug="${compile.debug}"
	1490	deprecation="${compile.deprecation}"
	1491	optimize="${compile.optimize}">
	1492	<classpath>
	1493	<path refid="compile.classpath"/>
	1494	</classpath>
	1495	<exclude name="org/greenstone/gsdl3/service/GS2MGPPRetrieve.java"/>
	1496	<exclude name="org/greenstone/gsdl3/service/GS2MGPPSearch.java"/>
	1497	<exclude name="org/greenstone/gsdl3/service/GS2MGSearch.java"/>
	1498	<exclude name="org/greenstone/gsdl3/service/GS2MGRetrieve.java"/>
	1499	<exclude name="org/greenstone/gsdl3/service/GoogleNgramMGPPSearch.java"/>
	1500	<exclude name="org/greenstone/gsdl3/service/PhindPhraseBrowse.java"/>
	1501	<exclude name="org/greenstone/gsdl3/util/GDBMWrapper.java"/>
	1502	</javac>
	1503	</else>
	1504	</if>
[15124]	1505	<jar destfile="${build.home}/gsdl3.jar">
	1506	<fileset dir="${build.home}">
[16936]	1507	<include name="org/greenstone/gsdl3/**"/>
[15124]	1508	<include name="org/flax/**"/>
[16936]	1509	<exclude name="**/Test.class"/>
[15124]	1510	</fileset>
	1511	<manifest>
[16936]	1512	<attribute name="Built-By" value="${user.name}" />
[15124]	1513	</manifest>
	1514	</jar>
	1515	<copy file="${build.home}/gsdl3.jar" todir="${web.lib}"/>
[22101]	1516
	1517	<jar destfile="${build.home}/gutil.jar">
	1518	<fileset dir="${build.home}">
	1519	<include name="org/greenstone/util/**"/>
	1520	</fileset>
	1521	<manifest>
	1522	<attribute name="Built-By" value="${user.name}" />
	1523	</manifest>
	1524	</jar>
	1525	<copy file="${build.home}/gutil.jar" todir="${web.lib}"/>
	1526
[15124]	1527	<!-- copy the localsite server in case we need it -->
[15235]	1528	<copy file="${build.home}/org/greenstone/gsdl3/${base.webservice.name}localsite.class" tofile="${web.classes}/org/greenstone/gsdl3/${base.webservice.name}localsite.class" />
[15124]	1529
[17918]	1530	<!-- Greenstone Administrator Interface -->
[15124]	1531	<jar destfile="${build.home}/GAI.jar">
	1532	<fileset dir="${build.home}">
[16936]	1533	<include name="org/greenstone/admin/**"/>
[15124]	1534	</fileset>
	1535	<manifest>
[16936]	1536	<attribute name="Built-By" value="${user.name}" />
[15124]	1537	</manifest>
	1538	</jar>
[17917]	1539	<copy file="${build.home}/GAI.jar" todir="${web.lib}"/>
[18124]	1540	<copy file="${build.home}/GAI.jar" todir="${admin.dir}"/>
[15124]	1541	<jar destfile="${build.home}/phind.jar">
	1542	<fileset dir="${build.home}">
[16936]	1543	<include name="org/greenstone/applet/phind/**"/>
[15124]	1544	</fileset>
	1545	<manifest>
[16936]	1546	<attribute name="Built-By" value="${user.name}" />
[15124]	1547	</manifest>
	1548	</jar>
	1549	<mkdir dir="${web.applet}"/>
	1550	<copy file="${build.home}/phind.jar" todir="${web.applet}"/>
	1551	<!-- phind also needs xercesImpl.jar and xml-apis.jar to be in web/applet -->
[18515]	1552	<if>
	1553	<bool><istrue value="${tomcat.islocal}"/></bool>
[20085]	1554	<copy file="${web.lib}/xercesImpl.jar" todir="${web.applet}"/>
	1555	<copy file="${web.lib}/xml-apis.jar" todir="${web.applet}"/>
[18515]	1556	</if>
	1557
	1558
[17116]	1559	<!-- skip anttasks for now
[15124]	1560	<jar destfile="${build.home}/anttasks.jar">
	1561	<fileset dir="${build.home}">
[16936]	1562	<include name="org/greenstone/anttasks/**"/>
[15124]	1563	</fileset>
	1564	<manifest>
[16936]	1565	<attribute name="Built-By" value="${user.name}" />
[15124]	1566	</manifest>
	1567	</jar>
[17116]	1568	<copy file="${build.home}/anttasks.jar" todir="${basedir}/lib/java"/>-->
[15124]	1569	<jar destfile="${build.home}/gsdl3test.jar">
	1570	<fileset dir="${build.home}">
[16936]	1571	<include name="org/greenstone/gsdl3/*/Test.class"/>
	1572	<include name="org/greenstone/testing/**"/>
[15124]	1573	</fileset>
	1574	<manifest>
[16936]	1575	<attribute name="Built-By" value="${user.name}" />
[15124]	1576	</manifest>
	1577	</jar>
	1578	<jar destfile="${build.home}/server.jar">
	1579	<fileset dir="${build.home}">
[16936]	1580	<include name="org/greenstone/server/**"/>
[22634]	1581	<include name="org/greenstone/util/**"/>
[15124]	1582	</fileset>
	1583	<fileset file="${basedir}/resources/java/server.properties"/>
	1584	<manifest>
[16936]	1585	<attribute name="Built-By" value="${user.name}"/>
[15124]	1586	</manifest>
	1587	</jar>
	1588	<copy file="${build.home}/server.jar" todir="${basedir}"/>
	1589	</target>
[15799]	1590
	1591	<!-- ================== Packages targets ================================ -->
[15124]	1592	<!-- these targets refer to the greenstone source packages - these need
	1593	updating less often, so are in separate targets to the core -->
[19871]	1594	<target name="prepare-packages" depends="init"/>
[15124]	1595
	1596	<target name="update-packages" depends="init,svnupdate-packages,configure-packages,clean-packages,compile-packages"
	1597	description="Update only the source packages"/>
	1598
[15799]	1599	<target name="svnupdate-packages" unless="nosvn.mode">
[20930]	1600	<exec executable="svn">
	1601	<arg value="update"/>
	1602	<arg value="${src.packages.home}"/>
	1603	<arg value="-r"/><arg value="${branch.revision}"/>
	1604	</exec>
[15124]	1605	</target>
[19931]	1606
[15124]	1607
[19871]	1608	<target name="configure-packages" depends="init,configure-javagdbm"
[15124]	1609	description="Configure only the packages."/>
	1610
[22184]	1611	<target name="configure-javagdbm" if="with.jni">
[15124]	1612	<echo>
	1613	Configuring JavaGDBM
	1614	</echo>
[18417]	1615
[19904]	1616	<exec executable="${javagdbm.home}/configure" os="${os.unix}" dir="${javagdbm.home}" failonerror="true">
[15124]	1617	<arg value="--prefix=${basedir}"/>
	1618	<arg value="--libdir=${lib.jni}"/>
[19873]	1619	<arg value="--with-gdbm=${gdbm.home}"/>
[15124]	1620	</exec>
	1621	</target>
	1622
[19871]	1623	<target name="clean-packages" depends="init,clean-javagdbm" description="Clean only the packages"/>
[15124]	1624
	1625	<target name="clean-javagdbm" depends="init">
	1626	<exec executable="make" os="${os.unix}"
[19904]	1627	dir="${javagdbm.home}" failonerror="true">
[15124]	1628	<arg value="clean"/>
	1629	</exec>
	1630	</target>
	1631
[19871]	1632	<target name="distclean-packages" depends="init,distclean-javagdbm" description="Distclean only the packages"/>
[15185]	1633
[15799]	1634	<target name="distclean-javagdbm" depends="init">
	1635	<exec executable="make" os="${os.unix}"
[19904]	1636	dir="${javagdbm.home}" failonerror="true">
[15799]	1637	<arg value="distclean"/>
	1638	</exec>
	1639	</target>
	1640
	1641	<target name="compile-packages" description="Compile only the source packages">
[22184]	1642	<!-- javagdbm -->
	1643	<antcall target="compile-javagdbm"/>
	1644	<!-- Search4j -->
	1645	<antcall target="compile-search4j"/>
	1646	</target>
	1647
	1648	<target name="compile-javagdbm" description="Compile JavaGDBM" if="with.jni">
[15799]	1649
[19878]	1650	<!-- unix: -->
[15799]	1651	<echo>compile javagdbm</echo>
[19904]	1652	<exec executable="make" os="${os.unix}" dir="${javagdbm.home}" failonerror="true"/>
	1653	<exec executable="make" os="${os.unix}" dir="${javagdbm.home}" failonerror="true">
[15799]	1654	<arg value="install"/>
	1655	</exec>
[15098]	1656
[23852]	1657	<!-- windows: Calling without the "compile" argument first will run winMake.bat with
	1658	"all" which will then perform both the compile AND link targets in jni/win32.mak
	1659	(thereby also generating gdbmjava.dll). Then we run the same command with
	1660	the "install" argument to copy the gdbmjava.dll into the correct location. -->
[23849]	1661	<echo>Windows: compile javagdbm</echo>
[24076]	1662	<exec executable="${javagdbm.home}/winMake.bat" os="${os.windows}" dir="${javagdbm.home}" failonerror="true">
	1663	<env key="GSDL3SRCHOME" path="${basedir}"/>
[23852]	1664	</exec>
	1665	<exec executable="${javagdbm.home}/winMake.bat" os="${os.windows}" dir="${javagdbm.home}" failonerror="true">
[24076]	1666	<env key="GSDL3SRCHOME" path="${basedir}"/>
[23847]	1667	<arg value="install"/>
[15799]	1668	</exec>
[15124]	1669
[15799]	1670	<!-- install the jar file -->
[23847]	1671	<echo>Install the javagdbm jar file ${javagdbm.home}/javagdbm.jar ${lib.jni}</echo>
[15799]	1672	<copy file="${javagdbm.home}/javagdbm.jar" todir="${lib.jni}"/>
	1673	</target>
	1674
[17491]	1675	<target name="compile-search4j">
[17509]	1676
[19996]	1677	<!-- windows -->
[19997]	1678	<if><bool><istrue value="${current.os.iswindows}"/></bool>
[19996]	1679	<exec executable="nmake" dir="${src.packages.home}/search4j" failonerror="true">
	1680	<arg value="/f"/>
	1681	<arg value="win32.mak"/>
	1682	<arg value='BINDIR="${basedir}\bin"'/>
	1683	</exec>
	1684	<exec executable="nmake" dir="${src.packages.home}/search4j" failonerror="true">
	1685	<arg value="/f"/>
	1686	<arg value="win32.mak"/>
	1687	<arg value="install"/>
	1688	<arg value='BINDIR="${basedir}\bin"'/>
	1689	</exec>
[17509]	1690
[19996]	1691	<!-- unix -->
[19997]	1692	<else><if><bool><istrue value="${current.os.isunix}"/></bool>
[19996]	1693	<exec executable="${src.packages.home}/search4j/configure" dir="${src.packages.home}/search4j" failonerror="true">
	1694	<arg value="--bindir=${basedir}/bin"/>
	1695	<arg value="${static.arg}"/>
	1696	</exec>
	1697	<exec executable="make" dir="${src.packages.home}/search4j" failonerror="true"/>
	1698	<exec executable="make" dir="${src.packages.home}/search4j" failonerror="true">
	1699	<arg value="install"/>
	1700	</exec>
[17509]	1701
[19996]	1702	<!-- else warn -->
	1703	<else>
	1704	<fail>this target does not support the current os</fail>
[17509]	1705
[19996]	1706	</else></if></else></if>
	1707
[17491]	1708	</target>
	1709
[19871]	1710	<target name="install-auxiliary-jar-files" depends="init">
[22184]	1711
	1712	<if>
	1713	<bool><available file="${mg.home}/mg.jar"/></bool>
	1714	<copy file="${mg.home}/mg.jar" todir="${lib.jni}"/>
	1715	</if>
	1716
	1717	<if>
[22199]	1718	<bool><available file="${mgpp.home}/mgpp.jar"/></bool>
[22184]	1719	<copy file="${mgpp.home}/mgpp.jar" todir="${lib.jni}"/>
	1720	</if>
	1721
[24744]	1722	<copy file="${lucene.home}/LuceneWrapper3.jar" todir="${web.lib}"/>
[19871]	1723	</target>
	1724
[22976]	1725	<target name="install-jni-files" depends="init" if="with.jni">
	1726	<antcall target="install-jni-files-linux"/>
	1727	<antcall target="install-jni-files-windows"/>
	1728	<antcall target="install-jni-files-macos"/>
	1729	</target>
[15124]	1730
[15799]	1731	<target name="install-jni-files-linux" depends="init" if="current.os.isunixnotmac">
[15124]	1732	<copy file="${mg.home}/jni/libmgretrievejni.so" todir="${lib.jni}"/>
	1733	<copy file="${mg.home}/jni/libmgsearchjni.so" todir="${lib.jni}"/>
[15799]	1734	<copy file="${mg.home}/jni/libmgpassjni.so" todir="${lib.jni}"/>
[15124]	1735	<copy file="${mgpp.home}/jni/libmgppretrievejni.so" todir="${lib.jni}"/>
	1736	<copy file="${mgpp.home}/jni/libmgppsearchjni.so" todir="${lib.jni}"/>
[15799]	1737	<copy file="${mgpp.home}/jni/libmgpppassjni.so" todir="${lib.jni}"/>
	1738	</target>
	1739	<target name="install-jni-files-windows" depends="init" if="current.os.iswindows">
[15124]	1740	<copy file="${mg.home}/jni/mgretrievejni.dll" todir="${lib.jni}"/>
	1741	<copy file="${mg.home}/jni/mgsearchjni.dll" todir="${lib.jni}"/>
[15799]	1742	<copy file="${mg.home}/jni/mgpassjni.dll" todir="${lib.jni}"/>
[15124]	1743	<copy file="${mgpp.home}/jni/mgppretrievejni.dll" todir="${lib.jni}"/>
	1744	<copy file="${mgpp.home}/jni/mgppsearchjni.dll" todir="${lib.jni}"/>
[15799]	1745	<copy file="${mgpp.home}/jni/mgpppassjni.dll" todir="${lib.jni}"/>
	1746	</target>
	1747	<target name="install-jni-files-macos" depends="init" if="current.os.ismac">
[15124]	1748	<copy file="${mg.home}/jni/libmgretrievejni.jnilib" todir="${lib.jni}"/>
	1749	<copy file="${mg.home}/jni/libmgsearchjni.jnilib" todir="${lib.jni}"/>
[15799]	1750	<copy file="${mg.home}/jni/libmgpassjni.jnilib" todir="${lib.jni}"/>
[15124]	1751	<copy file="${mgpp.home}/jni/libmgppretrievejni.jnilib" todir="${lib.jni}"/>
	1752	<copy file="${mgpp.home}/jni/libmgppsearchjni.jnilib" todir="${lib.jni}"/>
[15799]	1753	<copy file="${mgpp.home}/jni/libmgpppassjni.jnilib" todir="${lib.jni}"/>
	1754	</target>
	1755
[19871]	1756	<!-- ========common-src targets =================================-->
	1757	<!-- these are used to get common-src (for indexers, gdbm, sqlite etc) when
	1758	collection building is not enabled -->
	1759
	1760	<target name="update-common-src" depends="init" if="collection.building.disabled">
	1761	</target>
[19931]	1762
[19871]	1763	<target name="svnupdate-common-src" depends="init" if="collection.building.disabled" unless="nosvn.mode">
[20930]	1764	<exec executable="svn">
	1765	<arg value="update"/>
	1766	<arg value="${common.src.home}"/>
	1767	<arg value="-r"/><arg value="${branch.revision}"/>
	1768	</exec>
[19871]	1769	</target>
	1770
[19878]	1771	<target name="prepare-common-src" depends="init" if="collection.building.disabled" unless="common.src.present">
[19871]	1772	<antcall target="checkout-common-src"/>
	1773	<antcall target="unzip-windows-packages"/>
	1774	</target>
	1775
	1776	<target name="checkout-common-src" depends="init" if="collection.building.disabled" unless="nosvn.mode">
	1777	<echo>checking out common-src</echo>
[20930]	1778	<exec executable="svn">
	1779	<arg value="checkout"/>
[21196]	1780	<arg value="${svn.root}/main/${branch.path}/greenstone2/common-src"/>
[20930]	1781	<arg value="common-src"/>
	1782	<arg value="-r"/><arg value="${branch.revision}"/>
	1783	</exec>
[19871]	1784	</target>
	1785
[19931]	1786	<target name="configure-common-src" depends="init">
[19871]	1787	<exec executable="${common.src.home}/configure" os="${os.unix}"
[19904]	1788	dir="${common.src.home}" failonerror="true">
[19931]	1789	<arg value="--prefix=${gs2build.home}"/> <!-- what value to use?? -->
[19933]	1790	<arg value="--bindir=${gs2build.home}/bin/${os.bin.dir}"/> <!-- what value to use?? -->
[22184]	1791	<arg line="${gs2.opt.args}"/>
[22854]	1792	<arg line="${static.arg}"/>
[23611]	1793	<arg line="${allargs}"/>
[19871]	1794	</exec>
	1795	</target>
	1796
[19931]	1797	<target name="clean-common-src" depends="init">
[19871]	1798	<!-- unix: -->
[19904]	1799	<exec executable="make" os="${os.unix}" dir="${common.src.home}" failonerror="true">
[19871]	1800	<arg value="clean"/>
	1801	</exec>
	1802	<!-- windows: -->
[19904]	1803	<exec executable="nmake" dir="${common.src.home}" os="${os.windows}" failonerror="true">
[19871]	1804	<arg value="/f"/>
	1805	<arg value="win32.mak"/>
	1806	<arg value="clean"/>
[19960]	1807	<arg value="GSDLHOME=${gs2build.home}"/>
[19871]	1808	</exec>
	1809	</target>
[19931]	1810	<target name="distclean-common-src" depends="init">
[19960]	1811	<!-- unix: -->
[19904]	1812	<exec executable="make" os="${os.unix}" dir="${common.src.home}" failonerror="true">
[19871]	1813	<arg value="distclean"/>
	1814	</exec>
[19960]	1815	<!-- windows: distclean = clean + remove configure products (remove makefiles). But on Windows there is no removing makefiles, so we just call clean -->
	1816	<exec executable="nmake" dir="${common.src.home}" os="${os.windows}" failonerror="true">
	1817	<arg value="/f"/>
	1818	<arg value="win32.mak"/>
	1819	<arg value="clean"/>
	1820	<arg value="GSDLHOME=${gs2build.home}"/>
	1821	</exec>
[19871]	1822	</target>
[19931]	1823	<target name="compile-common-src" depends="init">
[19871]	1824	<!-- unix: -->
[19904]	1825	<exec executable="make" os="${os.unix}" dir="${common.src.home}" failonerror="true">
[22184]	1826	<arg value="${gs2.compile.target}"/>
[19871]	1827	</exec>
	1828	<!-- windows: -->
[19904]	1829	<exec executable="nmake" dir="${common.src.home}" os="${os.windows}" failonerror="true">
[19871]	1830	<arg value="/f"/>
	1831	<arg value="win32.mak"/>
[19934]	1832	<arg value="GSDLHOME=${gs2build.home}"/>
[22184]	1833	<arg value="ENABLE_JNI=${gs2.windows.enablejni}"/>
[22976]	1834	<arg value="ENABLE_MG=${gs2.windows.enablemg}"/>
	1835	<arg value="ENABLE_MGPP=${gs2.windows.enablemgpp}"/>
	1836	<arg value="USE_GDBM=${gs2.windows.usegdbm}"/>
	1837	<arg value="USE_SQLITE=${gs2.windows.usesqlite}"/>
[19871]	1838	</exec>
	1839	</target>
	1840
[19843]	1841	<!-- ======= collection-building targets ===========================-->
[15124]	1842
[19843]	1843	<target name="update-collection-building" if="collection.building.enabled"
[19931]	1844	depends="init,svnupdate-collection-building,gs2build-edit-setup-bat,configure-common-src,clean-common-src,compile-common-src,configure-collection-building,clean-collection-building,compile-collection-building"
[19843]	1845	description="Update (SVN update, configure, compile etc) only the collection building components"/>
[15124]	1846
[19843]	1847	<target name="svnupdate-collection-building" if="collection.building.enabled" depends="init,svnupdate-gs2build,svnupdate-gli" unless="nosvn.mode"
	1848	description="SVN update the collection building components">
	1849	</target>
[15124]	1850
[19843]	1851	<target name="prepare-collection-building" depends="init,prepare-gs2build,prepare-gli" if="collection.building.enabled">
[15124]	1852	</target>
	1853
[19931]	1854	<target name="configure-collection-building" depends="init,configure-build-src" if="collection.building.enabled"
	1855	description="Configure the collection building components">
[19843]	1856	</target>
[15098]	1857
[19948]	1858	<target name="clean-collection-building" depends="init,clean-gli,clean-build-src"
[19843]	1859	description="Clean only the collection building components"
	1860	if="collection.building.enabled"/>
[18495]	1861
[19948]	1862	<target name="distclean-collection-building" depends="init,clean-build-src,distclean-build-src"
[19843]	1863	description="Distclean only the collection building components"
	1864	if="collection.building.enabled"/>
	1865
[19931]	1866	<target name="compile-collection-building" depends="init,compile-build-src,compile-gli" if="collection.building.enabled"
[19843]	1867	description="Compile only the collection building components">
[19931]	1868	<!-- make install for common-src -->
	1869	<!-- unix: -->
	1870	<exec executable="make" os="${os.unix}" dir="${common.src.home}" failonerror="true">
[22184]	1871	<arg value="${gs2.install.target}"/>
[19931]	1872	</exec>
	1873
	1874	<!-- windows: -->
	1875	<exec executable="nmake" dir="${common.src.home}" os="${os.windows}" failonerror="true">
	1876	<arg value="/f"/>
	1877	<arg value="win32.mak"/>
[21370]	1878	<arg value="install"/>
[23837]	1879	<arg value="GSDLHOME=${gs2build.home}"/>
[22184]	1880	<arg value="ENABLE_JNI=${gs2.windows.enablejni}"/>
[23837]	1881	<arg value="ENABLE_MG=${gs2.windows.enablemg}"/>
	1882	<arg value="ENABLE_MGPP=${gs2.windows.enablemgpp}"/>
	1883	<arg value="USE_GDBM=${gs2.windows.usegdbm}"/>
	1884	<arg value="USE_SQLITE=${gs2.windows.usesqlite}"/>
	1885	<!--
	1886	<arg value="ENABLE_JNI=${gs2.windows.enablejni}"/>
	1887	<arg value="USE_SQLITE=0"/>--> <!-- why is this not on by default? -->
[19931]	1888	</exec>
	1889
	1890	<!-- install gs2build indexers for windows -->
	1891	<if>
	1892	<bool><istrue value="${current.os.iswindows}"/></bool>
	1893	<copy todir="${gs2build.home}/bin/windows">
	1894	<fileset dir="${gs2build.home}/common-src/indexers/bin">
	1895	<include name="."/>
	1896	</fileset>
	1897	</copy>
	1898	</if>
	1899
	1900	<!-- LuceneWrapper jar file not installed by default -->
	1901	<mkdir dir="${gs2build.home}/bin/java"/>
[24744]	1902	<copy file="${lucene.home}/LuceneWrapper3.jar" todir="${gs2build.home}/bin/java"/>
[19931]	1903
[15124]	1904	</target>
[19843]	1905
	1906	<!-- ============== gli targets ================================= -->
[15799]	1907	<target name="svnupdate-gli" if="collection.building.enabled" depends="init" unless="nosvn.mode">
[19929]	1908
[20930]	1909	<exec executable="svn">
	1910	<arg value="update"/>
	1911	<arg value="${gli.home}"/>
	1912	<arg value="-r"/><arg value="${branch.revision}"/>
	1913	</exec>
	1914
[21196]	1915	<exec executable="svn" dir="web/WEB-INF/cgi">
[20930]	1916	<arg value="export"/>
	1917	<arg value="-r"/><arg value="${branch.revision}"/>
[25136]	1918	<arg value="${svn.root}/main/${branch.path}/greenstone2/common-src/cgi-bin/gliserver.pl"/>
[20930]	1919	</exec>
[21196]	1920	<exec executable="svn" dir="web/WEB-INF/cgi">
	1921	<arg value="export"/>
	1922	<arg value="-r"/><arg value="${branch.revision}"/>
[25136]	1923	<arg value="${svn.root}/main/${branch.path}/greenstone2/common-src/cgi-bin/gsdlCGI.pm"/>
[21196]	1924	</exec>
[20930]	1925
[15124]	1926	</target>
	1927
[19843]	1928	<target name="prepare-gli" depends="init" if="collection.building.enabled" unless="gli.present">
[19911]	1929	<!-- checkout -->
[23808]	1930	<if><bool><and><not><istrue value="${nosvn.mode}"/></not><isset property="with.gli.and.gems"/></and></bool>
[19929]	1931
[20930]	1932	<exec executable="svn">
	1933	<arg value="checkout"/>
[21196]	1934	<arg value="${svn.root}/main/${branch.path}/gli"/>
[20930]	1935	<arg value="-r"/><arg value="${branch.revision}"/>
	1936	</exec>
	1937
[21196]	1938	<exec executable="svn" dir="web/WEB-INF/cgi">
[20930]	1939	<arg value="export"/>
	1940	<arg value="-r"/><arg value="${branch.revision}"/>
[21196]	1941	<arg value="${svn.root}/main/${branch.path}/greenstone2/cgi-bin/gliserver.pl"/>
[20930]	1942	</exec>
[21196]	1943	<exec executable="svn" dir="web/WEB-INF/cgi">
	1944	<arg value="export"/>
	1945	<arg value="-r"/><arg value="${branch.revision}"/>
	1946	<arg value="${svn.root}/main/${branch.path}/greenstone2/cgi-bin/gsdlCGI.pm"/>
	1947	</exec>
[20930]	1948
[19911]	1949	</if>
[15124]	1950	</target>
[19843]	1951
	1952	<target name="clean-gli" depends="init" if="collection.building.enabled">
	1953	<!-- gli -->
	1954	<property name="gli.home" value="${basedir}/gli"/>
	1955	<!-- linux -->
	1956	<exec executable="clean.sh" os="${os.unix}" dir="${gli.home}"
[20826]	1957	resolveExecutable="true" failonerror="true"/>
[19843]	1958	<!-- windows -->
	1959	<exec executable="clean.bat" os="${os.windows}" dir="${gli.home}"
[20826]	1960	resolveExecutable="true" failonerror="true"/>
[19843]	1961	</target>
	1962
	1963	<target name="compile-gli" depends="init" if="collection.building.enabled">
[23808]	1964	<if><bool><isset property="with.gli.and.gems"/></bool>
[23807]	1965	<!-- gli -->
	1966	<property name="gli.home" value="${basedir}/gli"/>
[15098]	1967
[23807]	1968	<!-- linux -->
	1969	<exec executable="makegli.sh" os="${os.unix}" dir="${gli.home}" resolveExecutable="true" failonerror="true"/>
	1970	<!--remote gli-->
	1971	<exec executable="makejar.sh" os="${os.unix}" dir="${gli.home}"
	1972	resolveExecutable="true" failonerror="true"/>
	1973	<!-- windows -->
	1974	<exec executable="makegli.bat" os="${os.windows}" dir="${gli.home}" resolveExecutable="true" failonerror="true"/>
	1975	<!--remote gli-->
	1976	<exec executable="makejar.bat" os="${os.windows}" dir="${gli.home}"
	1977	resolveExecutable="true" failonerror="true"/>
	1978	<copy file="${gli.home}/GLIServer.jar" todir="${gs2build.home}/bin/java" />
	1979	</if>
[19843]	1980	</target>
[15124]	1981
[19843]	1982	<target name="gli" description="Run the Greenstone Librarian Interface" depends="init" if="collection.building.enabled">
[21351]	1983	<exec executable="${basedir}/gli/gli.sh" os="${os.linux},${os.solaris}" dir="${basedir}/gli" spawn="true">
[19843]	1984	<env key="gsdl3path" path="${basedir}"/>
[19871]	1985	<env key="gsdlpath" path="${gs2build.home}"/>
[19843]	1986	</exec>
[21351]	1987	<exec executable="${basedir}/gli/gli.sh" os="${os.mac}" dir="${basedir}/gli" spawn="true">
[19843]	1988	<env key="gsdl3path" path="${basedir}"/>
[19871]	1989	<env key="gsdlpath" path="${gs2build.home}"/>
[19873]	1990	<env key="DYLD_LIBRARY_PATH" path="${env.DYLD_LIBRARY_PATH}:${gdbm.home}/lib"/>
[19843]	1991	</exec>
[21351]	1992	<exec executable="${basedir}/gli/gli.bat" os="${os.windows}" dir="${basedir}/gli" spawn="true">
[19843]	1993	<env key="GSDL3PATH" path="${basedir}"/>
[19871]	1994	<env key="GSDLPATH" path="${gs2build.home}"/>
[19843]	1995	</exec>
	1996	<echo>Running GLI from Ant means that you don't get to see any of the terminal output. If you have problems with GLI and want to see the output, please run the script gli.sh/bat from the greenstone3/gli directory.
	1997	</echo>
	1998	</target>
	1999
	2000	<!-- ================ gs2build targets =========================== -->
	2001
	2002	<target name="svnupdate-gs2build" if="collection.building.enabled" depends="init" unless="nosvn.mode">
	2003	<echo>svn updating gs2build</echo>
[20930]	2004	<exec executable="svn">
	2005	<arg value="update"/>
	2006	<arg value="${gs2build.home}"/>
	2007	<arg value="-r"/><arg value="${branch.revision}"/>
	2008	</exec>
[15799]	2009	</target>
[19843]	2010
[15124]	2011	<target name="prepare-gs2build" depends="init" if="collection.building.enabled" unless="gs2build.present">
	2012	<antcall target="checkout-gs2build"/>
	2013	<antcall target="unzip-windows-packages"/>
	2014	<antcall target="checkout-winbin"/>
	2015	<antcall target="get-windows-binaries"/>
	2016	<antcall target="delete-winbin"/>
	2017	</target>
	2018
[19843]	2019	<target name="checkout-gs2build" depends="init" if="collection.building.enabled" unless="nosvn.mode">
	2020	<echo>checking out gs2build</echo>
[20930]	2021	<exec executable="svn">
	2022	<arg value="checkout"/>
[21196]	2023	<arg value="${svn.root}/main/${branch.path}/gs2build"/>
[20930]	2024	<arg value="-r"/><arg value="${branch.revision}"/>
	2025	</exec>
	2026
[21196]	2027
[19843]	2028	</target>
	2029
[15124]	2030	<target name="checkout-winbin" depends="init" if="current.os.iswindows"
[15799]	2031	unless="nosvn.mode">
[20930]	2032
	2033	<exec executable="svn">
	2034	<arg value="checkout"/>
[21196]	2035	<arg value="${svn.root}/main/${branch.path}/binaries/windows"/>
[20930]	2036	<arg value="-r"/><arg value="${branch.revision}"/>
[21196]	2037	<arg value="winbin"/>
[20930]	2038	</exec>
	2039
[15124]	2040	</target>
	2041
[15799]	2042	<target name="update-winbin" depends="init" if="current.os.iswindows" unless="nosvn.mode">
[20930]	2043	<exec executable="svn">
	2044	<arg value="update"/>
	2045	<arg value="winbin"/>
	2046	<arg value="-r"/><arg value="${branch.revision}"/>
	2047	</exec>
	2048
[15799]	2049	</target>
[15124]	2050
	2051	<target name="get-windows-binaries" depends="init" if="collection.building.enabled.windows">
	2052	<move todir="${gs2build.home}/bin/windows" failonerror="false">
	2053	<fileset dir="${basedir}/winbin/bin"/>
	2054	</move>
	2055	</target>
[19843]	2056
[15124]	2057	<target name="delete-winbin" depends="init" if="collection.building.enabled.windows">
	2058	<delete dir="${basedir}/winbin"/>
	2059	</target>
	2060
[19871]	2061	<target name="unzip-windows-packages" depends="init" if="current.os.iswindows">
	2062	<unzip src="${common.src.home}/packages/windows/crypt/crypt.zip"
	2063	dest="${common.src.home}/packages/windows/crypt"/>
[18179]	2064	<untar compression="gzip"
[19871]	2065	src="${common.src.home}/packages/sqlite/${sqlite.targz.version}"
	2066	dest="${common.src.home}/packages/sqlite"/>
	2067	<unzip src="${common.src.home}/indexers/packages/windows/iconv/iconv.zip"
	2068	dest="${common.src.home}/indexers/packages/windows/iconv"/>
[15799]	2069	</target>
[19878]	2070
[15124]	2071	<target name="gs2build-edit-setup-bat" if="collection.building.enabled.windows">
	2072	<!-- we want a windows path in the setup.bat file -->
	2073	<pathconvert targetos="windows" property="gs2build.home.windows">
	2074	<path path="${gs2build.home}"/>
	2075	</pathconvert>
	2076	<move file="${gs2build.home}/setup.bat" tofile="${gs2build.home}/setup-tmp.bat">
	2077	<filterset>
[16620]	2078	<filter token="gsdlhome" value="${gs2build.home.windows}"/>
[15799]	2079	</filterset>
[15124]	2080	</move>
	2081	<move file="${gs2build.home}/setup-tmp.bat" tofile="${gs2build.home}/setup.bat" />
	2082	</target>
	2083
[19843]	2084
[19948]	2085	<target name="clean-build-src" depends="init" if="collection.building.enabled">
[19871]	2086	<!-- unix: -->
[19948]	2087	<exec executable="make" os="${os.unix}" dir="${build.src.home}" failonerror="true">
[15124]	2088	<arg value="clean"/>
	2089	</exec>
	2090	<!-- windows: -->
[19948]	2091	<exec executable="nmake" dir="${build.src.home}" os="${os.windows}" failonerror="true">
[15799]	2092	<arg value="/f"/>
	2093	<arg value="win32.mak"/>
	2094	<arg value="clean"/>
[19960]	2095	<arg value="GSDLHOME=${gs2build.home}"/>
[15124]	2096	</exec>
	2097	</target>
	2098
[19948]	2099
	2100	<target name="distclean-build-src" depends="init,clean-build-src" if="collection.building.enabled">
[19960]	2101	<!-- unix: -->
[19948]	2102	<exec executable="make" os="${os.unix}" dir="${build.src.home}" failonerror="true">
[15124]	2103	<arg value="distclean"/>
	2104	</exec>
[19960]	2105	<!-- windows: distclean = clean + remove configure products (remove makefiles). But on Windows there is no removing makefiles, so we just call clean -->
	2106	<exec executable="nmake" dir="${build.src.home}" os="${os.windows}" failonerror="true">
	2107	<arg value="/f"/>
	2108	<arg value="win32.mak"/>
	2109	<arg value="clean"/>
	2110	<arg value="GSDLHOME=${gs2build.home}"/>
	2111	</exec>
[15124]	2112	</target>
[19843]	2113
[19931]	2114	<target name="configure-build-src" depends="init" if="collection.building.enabled"
	2115	description="Configure the build-src component">
	2116	<exec executable="${build.src.home}/configure" os="${os.unix}"
	2117	dir="${build.src.home}" failonerror="true">
	2118	<arg value="--prefix=${gs2build.home}"/>
[23611]	2119	<arg line="${gs2.opt.args} ${static.arg} ${allargs}"/>
[19931]	2120	</exec>
	2121	</target>
[19910]	2122
[19931]	2123	<!-- common-src is done separately and needs to be compiled first -->
	2124	<target name="compile-build-src" depends="init" if="collection.building.enabled">
	2125
	2126	<exec executable="make" dir="${build.src.home}" os="${os.unix}" failonerror="true">
[23611]	2127	<arg line="${ldlpath.arg}"/>
[22845]	2128	</exec>
	2129
	2130	<exec executable="make" dir="${build.src.home}" os="${os.unix}" failonerror="true">
[19931]	2131	<arg value="install"/>
	2132	</exec>
[19910]	2133
[19931]	2134	<!-- run the setup script -->
[20826]	2135	<!-- <exec executable="${compile.windows.c++.setup}" os="${os.windows}" failonerror="true"/>-->
[19910]	2136	<!--Above does not work: even though vcvars.bat executes, the env changes it makes don't get saved. Need user to run vcvars.bat first before calling ant-->
[19931]	2137	<exec executable="nmake" dir="${build.src.home}" os="${os.windows}" failonerror="true">
[19910]	2138	<arg value="/f"/>
	2139	<arg value="win32.mak"/>
[19934]	2140	<arg value="GSDLHOME=${gs2build.home}"/>
[19910]	2141	</exec>
[19931]	2142	<exec executable="nmake" dir="${build.src.home}" os="${os.windows}" failonerror="true">
[19910]	2143	<arg value="/f"/>
	2144	<arg value="win32.mak"/>
	2145	<arg value="install"/>
[19934]	2146	<arg value="GSDLHOME=${gs2build.home}"/>
[19910]	2147	</exec>
[15124]	2148	</target>
	2149
	2150
[15799]	2151	<!-- ======================== TESTING Targets ========================= -->
[15124]	2152
	2153	<target name="test" description="Run the (incomplete) JUnit test suite "
	2154	depends="init">
	2155	<mkdir dir="${basedir}/test"/>
	2156	<junit printsummary="withOutAndErr"
	2157	errorproperty="test.failed"
	2158	failureproperty="test.failed"
	2159	fork="${junit.fork}">
	2160	<formatter type="plain"/>
	2161	<classpath>
[16936]	2162	<pathelement location="${build.home}/gsdl3test.jar"/>
	2163	<path refid="compile.classpath"/>
[15124]	2164	</classpath>
	2165	<test name="${testcase}" if="testcase"/>
	2166	<batchtest todir="${basedir}/test" unless="testcase">
[18505]	2167	<fileset dir="${build.home}" includes="*/Test.class" />
[15124]	2168	</batchtest>
	2169	</junit>
	2170	<echo>
	2171	*********************************************
[15799]	2172	Test output can be found in directory 'test'
[15124]	2173	*********************************************
	2174	</echo>
	2175	</target>
[15799]	2176
[20950]	2177	<!-- ======================== FLAX Targets ========================= -->
	2178	<target name="prepare-flax" description="check out flax source code from another repository" if="install.flax">
	2179	<echo>checking out flax ...</echo>
	2180	<mkdir dir="${basedir}/src/java/org/flax"/>
	2181	<mkdir dir="${basedir}/src/java/org/greenstone/gsdl3/flax"/>
[22198]	2182	<mkdir dir="${basedir}/src/java/org/greenstone/gsdl3/action/flax"/>
[20950]	2183	<mkdir dir="${web.home}/WEB-INF/classes/flax"/>
	2184	<mkdir dir="${web.home}/interfaces/flax"/>
	2185	<mkdir dir="${web.home}/sites/flax"/>
	2186	<mkdir dir="${basedir}/flax-resources"/>
	2187	<mkdir dir="${basedir}/flax-lib"/>
[21272]	2188	<exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/src/java/org/flax"/>
	2189	<arg value="src/java/org/flax"/></exec>
	2190	<exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/src/java/org/greenstone/gsdl3/flax"/>
	2191	<arg value="src/java/org/greenstone/gsdl3/flax"/></exec>
[22198]	2192	<exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/src/java/org/greenstone/gsdl3/action/flax"/>
	2193	<arg value="src/java/org/greenstone/gsdl3/action/flax"/></exec>
	2194	<exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/web/WEB-INF/classes/flax"/>
[21272]	2195	<arg value="${web.home}/WEB-INF/classes/flax"/></exec>
	2196	<exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/web/interfaces/flax"/>
	2197	<arg value="${web.home}/interfaces/flax"/></exec>
	2198	<exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/web/sites/flax"/>
	2199	<arg value="${web.home}/sites/flax"/></exec>
	2200	<exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/flax-resources"/>
	2201	<arg value="flax-resources"/></exec>
	2202	<exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/lib"/>
	2203	<arg value="flax-lib"/></exec>
[20950]	2204	<antcall target="flax-copy-files" />
	2205	</target>
[23442]	2206
	2207	<target name="flax-copy-files" description="copy some flax files into the appropriate greenstone3 directories">
	2208	<echo>copying flax files ...</echo>
	2209	<copy file="${web.home}/WEB-INF/classes/flax/web.xml" todir="${web.home}/WEB-INF" overwrite="true" />
	2210	<!-- A configuration file containing web service binding information for the axis engine -->
	2211	<copy file="${web.home}/WEB-INF/classes/flax/server-config.wsdd" todir="${web.home}/WEB-INF" overwrite="true" />
	2212	<!-- A static web service wsdl file which is queried by soap client. The reason this file is used (instead of the dynamically generated version) is in case any redirects are used in the Apache configuration (e.g., flax.nzdl.org:80 redirects to harakeke:8080) -->
[23696]	2213	<copy file="${basedir}/flax-resources/FlaxWebService.wsdl" tofile="${web.home}/FlaxWebService.wsdl" overwrite="true"/>
[23442]	2214	<copy todir="${web.home}/WEB-INF/lib">
	2215	<fileset dir="${basedir}/flax-lib">
[23443]	2216	<include name="*.jar"/>
[23442]	2217	</fileset>
	2218	</copy>
	2219	</target>
[23681]	2220	<target name="configure-flax-wsdl" description="Configure flax webservice with tomcat server/port">
[23986]	2221	<copy file="${basedir}/flax-resources/FlaxWebService.wsdl" tofile="${web.home}/FlaxWebService.wsdl" overwrite="true"/>
[23696]	2222	<rsr file="${web.home}/FlaxWebService.wsdl" pattern="@flaxpublicserver@:@flaxpublicport@" replacement="${tomcat.server}:${tomcat.port}"/>
[23936]	2223	<echo>FLAX server for Moodle module is configured to: http://${tomcat.server}:${tomcat.port}.</echo>
[23681]	2224	</target>
[20950]	2225
	2226	<target name="update-flax" description="update flax from repository">
	2227	<echo>updating flax ...</echo>
[21272]	2228	<exec executable="svn"><arg value="update"/>
	2229	<arg value="src/java/org/flax"/></exec>
	2230	<exec executable="svn"><arg value="update"/>
[22198]	2231	<arg value="src/java/org/greenstone/gsdl3/action/flax"/></exec>
	2232	<exec executable="svn"><arg value="update"/>
[21272]	2233	<arg value="src/java/org/greenstone/gsdl3/flax"/></exec>
	2234	<exec executable="svn"><arg value="update"/>
	2235	<arg value="${web.home}/WEB-INF/classes/flax"/></exec>
	2236	<exec executable="svn"><arg value="update"/>
	2237	<arg value="${web.home}/interfaces/flax"/></exec>
	2238	<exec executable="svn"><arg value="update"/>
[24366]	2239	<arg value="${web.home}/web/sites/flax"/></exec>
	2240	<exec executable="svn"><arg value="update"/>
[21272]	2241	<arg value="flax-resources"/></exec>
	2242	<exec executable="svn"><arg value="update"/>
	2243	<arg value="flax-lib"/></exec>
[24098]	2244	<antcall target="compile-core" />
[20950]	2245	</target>
	2246
[20963]	2247
[19354]	2248	<target name="compile-javadocs">
	2249	<javadoc packagenames="org.greenstone.*"
	2250	sourcepath="src/java"
	2251	defaultexcludes="yes"
	2252	destdir="docs/javadoc"
	2253	author="true"
	2254	version="true"
	2255	use="true"
	2256	windowtitle="Greenstone3 API">
	2257	<doctitle><![CDATA[<h1>Greenstone3 API</h1>]]></doctitle>
	2258	</javadoc>
	2259	</target>
	2260
[20089]	2261	<!-- ========== Some distribution targets ======================== -->
[19972]	2262	<target name="remove-source">
[23809]	2263	<if><bool><isset property="with.gli.and.gems"/></bool>
[19975]	2264	<delete includeEmptyDirs="true">
	2265	<fileset dir="." defaultexcludes="false">
	2266	<patternset refid="greenstone3.source.component"/>
	2267	</fileset>
	2268	</delete>
[23809]	2269
	2270	<else>
	2271	<delete includeEmptyDirs="true">
	2272	<fileset dir="." defaultexcludes="false">
	2273	<patternset refid="greenstone3.source.no.gli.component"/>
	2274	</fileset>
	2275	</delete>
	2276	</else>
	2277	</if>
[19972]	2278	</target>
	2279
[19903]	2280	<target name="dist-tidy"
	2281	description="'tidies-up' a greenstone3 installation for distribution.">
	2282
	2283	<!-- delete unneeded things -->
	2284	<delete dir="${packages.home}/axis"/>
	2285	<delete><fileset dir="${packages.home}" includes="*.zip"/></delete>
	2286	<delete file="README-SVN.txt"/>
[20215]	2287	<delete file="build.properties.in"/>
[19903]	2288
[19961]	2289	<!-- delete source files -->
[19972]	2290	<antcall target="remove-source"/>
[19903]	2291
	2292	<!-- create empty directories -->
	2293	<mkdir dir="${web.home}/applet"/>
	2294	<mkdir dir="${web.home}/logs"/>
	2295
	2296	<!-- os specific tidy-ups -->
[20051]	2297	<!-- linux, mac -->
	2298	<if><bool><istrue value="${current.os.isunix}"/></bool>
[19903]	2299	<delete><fileset dir="." includes="*.bat"/></delete>
[23809]	2300	<if><bool><isset property="with.gli.and.gems"/></bool>
	2301	<delete><fileset dir="gli" includes="*.bat"/></delete>
	2302	</if>
[19903]	2303	<delete><fileset dir="gs2build" includes="*.bat"/></delete>
	2304	<delete><fileset dir="bin/script" includes="*.bat"/></delete>
[19946]	2305	<delete file="${basedir}/gs2build/win32cfg.h"/>
[19939]	2306	<delete file="${basedir}/gs2build/win32.mak"/>
[20051]	2307	<delete dir="${basedir}/winutil"/>
[19903]	2308	<delete failonerror="false"><fileset dir="${lib.jni}" includes="*.dll"/></delete>
	2309
[20051]	2310	<!-- windows -->
	2311	<else><if><bool><istrue value="${current.os.iswindows}"/></bool>
	2312	<delete><fileset dir="." includes=".sh,.bash,*.csh"/></delete>
[23809]	2313	<if><bool><isset property="with.gli.and.gems"/></bool>
	2314	<delete><fileset dir="gli" includes=".sh,.bash,*.csh"/></delete>
	2315	</if>
[20051]	2316	<delete><fileset dir="gs2build" includes=".sh,.bash,*.csh"/></delete>
	2317	<delete><fileset dir="bin/script" includes=".sh,.bash,*.csh"/></delete>
	2318	</if></else></if>
	2319
[19903]	2320	</target>
	2321
[20089]	2322	<!-- fix up executable permissions for binary release -->
	2323	<target name="fix-execute-permissions">
	2324	<echo>Setting binaries to executable</echo>
[20127]	2325	<chmod perm="775">
	2326	<fileset dir="."><patternset refid="greenstone3.executables"/></fileset>
	2327	</chmod>
[20089]	2328	</target>
	2329
	2330	<!-- fix up executable permissions for source code release -->
	2331	<target name="fix-execute-permissions-source">
[20127]	2332	<chmod perm="775">
	2333	<fileset dir="."><patternset refid="greenstone3.source.executables"/></fileset>
	2334	</chmod>
[20089]	2335	</target>
	2336
	2337
[19931]	2338	<!-- ============= tweaks for making compilation static ========== -->
	2339	<target name="tweak-makefiles" depends="init" if="compile.static">
	2340	<antcall target="rtftohtml-add-static" />
	2341	</target>
	2342
	2343	<target name="rtftohtml-add-static" depends="init" if="collection.building.enabled">
	2344	<rsr file="${gs2build.home}/build-src/packages/rtftohtml/rtftohtml_src/Makefile" pattern="-o rtftohtml(.{2})EXEEXT(.{1})" replacement="-o rtftohtml$1EXEEXT$2 -static" />
	2345	</target>
	2346
[15028]	2347	</project>
[22184]	2348

Note: See TracBrowser for help on using the repository browser.

Download in other formats: