source: main/trunk/greenstone3/build.xml@ 25136

Last change on this file since 25136 was 25136, checked in by sjm84, 12 years ago

Corrected the cgi-bin dirs to point to the common-src folder
File size: 91.2 KB
Line 
1<?xml version="1.0"?>
2<!-- ======================================================================
3 March 2005
4
5 Greenstone3 build and install script
6
7 kjdon
8 ====================================================================== -->
9<project name="greenstone3" default="usage" basedir=".">
10 <echo>os.name: ${os.name}</echo>
11
12 <!-- ============ classpath =================== -->
13 <path id="project.classpath">
14 <fileset dir="lib/java">
15 <include name="**/*.jar"/>
16 </fileset>
17 </path>
18
19 <!-- ============ self defined tasks =================== -->
20 <taskdef name="mysetproxy" classname="org.greenstone.anttasks.MySetProxy" classpathref="project.classpath"/>
21 <taskdef name="getuserandpassword" classname="org.greenstone.anttasks.MyGetUserAndPassword" classpathref="project.classpath"/>
22 <taskdef name="rsr" classname="org.greenstone.anttasks.RegexSearchReplace" classpathref="project.classpath"/>
23 <!--<taskdef name="svn" classname="org.tigris.subversion.svnant.SvnTask" classpathref="project.classpath"/>-->
24 <taskdef name="if" classname="ise.antelope.tasks.IfTask" classpathref="project.classpath"/>
25 <taskdef name="stringutil" classname="ise.antelope.tasks.StringUtilTask" classpathref="project.classpath"/>
26
27
28 <!-- ===================== Property Definitions =========================== -->
29
30 <!--
31
32 Each of the following properties are used in the build script.
33 Values for these properties are set by the first place they are
34 defined, from the following list:
35
36 * Definitions on the "ant" command line (ant -Dfoo=bar compile).
37
38 * Definitions from a "build.properties" file in the top level
39 source directory of this application.
40
41 * Definitions from a "build.properties" file in the user's
42 home directory.
43
44 * Default definitions in this build.xml file.
45
46 You will note below that property values can be composed based on the
47 contents of previously defined properties. This is a powerful technique
48 that helps you minimize the number of changes required when your development
49 environment is modified. Note that property composition is allowed within
50 "build.properties" files as well as in the "build.xml" script.
51
52 -->
53
54 <!-- create build.properties if it has not been created yet -->
55 <if>
56 <bool><not><available file="build.properties"/></not></bool>
57 <copy file="build.properties.in" tofile="build.properties"/>
58 </if>
59
60 <!-- create the packages dir if it has not been created yet -->
61 <mkdir dir="packages"/>
62
63 <!--the first three properties have to be put on the top to be used by build.properties-->
64 <property name="gs2build.home" value="${basedir}${file.separator}gs2build"/>
65 <property name="src.packages.home" value="${basedir}/src/packages"/>
66 <property name="flax.svn.root" value="http://svn.greenstone.org/flax"/>
67
68 <property file="build.properties"/>
69 <if><bool><available file="${user.home}/build.properties"/></bool>
70 <property file="${user.home}/build.properties"/>
71 </if>
72
73 <!-- now we've read in properties, apply defaults -->
74 <property name="disable.collection.building" value="false"/>
75
76 <!-- get properties from the environment -->
77 <property environment="env"/>
78
79 <!-- get the filesets defining components and executables -->
80 <import file="resources/xml/components.xml"/>
81 <import file="resources/xml/executables.xml"/>
82
83 <!-- version properties for external packages -->
84 <!-- for Java versions < 1.4, we print out the message that Java is too old.
85 For Java 1.4, we use Tomcat 5.5, for Java5 and higher, we use Tomcat 7.0-->
86 <condition property="tomcat.version" value="apache-tomcat-5.5.25" else="apache-tomcat-7.0.26">
87 <equals arg1="1.4" arg2="${ant.java.version}"/>
88 </condition>
89 <condition property="tomcat.version.major" value="5" else="7">
90 <equals arg1="1.4" arg2="${ant.java.version}"/>
91 </condition>
92 <condition property="privileged.attribute" value="privileged='true'" else="">
93 <equals arg1="6" arg2="${tomcat.version.major}"/>
94 </condition>
95
96 <property name="axis.zip.version" value="axis-bin-1_4.zip"/>
97 <property name="axis.dir.version" value="axis-1_4"/>
98 <property name="sqlite.targz.version" value="sqlite-autoconf-3070602.tar.gz"/>
99
100 <property name="build.home" value="${basedir}/build"/>
101 <property name="src.home" value="${basedir}/src/java"/>
102 <property name="packages.home" value="${basedir}/packages"/>
103 <!-- this may be set in build.properties, eg if you move the web dir to
104 tomcats webapps directory -->
105 <property name="web.home" value="${basedir}/web"/>
106 <!-- jar files needed by applets go here -->
107 <property name="web.applet" value="${web.home}/applet"/>
108
109 <!-- jar files needed by the servlet (and extra ones) go here -->
110 <property name="web.lib" value="${web.home}/WEB-INF/lib"/>
111 <!-- other files needed by the servlet go here -->
112 <property name="web.classes" value="${web.home}/WEB-INF/classes"/>
113 <!--- flax: the WordNet home -->
114 <property name="wn.home" value="${web.home}/WEB-INF/classes/flax/WordNet"/>
115
116 <!-- jni libraries and java wrappers go here -->
117 <property name="lib.jni" value="${basedir}/lib/jni"/>
118
119 <!-- other jar files needed for installation (but not runtime) go here -->
120 <property name="lib.java" value="${basedir}/lib/java"/>
121
122 <property name="javadocs" value="${basedir}/docs/javadoc"/>
123
124 <property name="app.name" value="greenstone3"/>
125 <property name="app.path" value="/${app.name}"/>
126
127 <property name="admin.dir" value="${basedir}/admin"/>
128
129 <!-- defaults - set these on the command line or in build.properties or they will take these default values-->
130 <property name="app.version" value="trunk"/>
131 <property name="branch.path" value="trunk"/>
132 <property name="branch.revision" value="HEAD"/>
133
134 <!--constants -->
135 <property name="svn.root" value="http://svn.greenstone.org"/>
136
137 <!-- catalina home is set to tomcat basedir if already installed, otherwise
138 use greenstone's tomcat -->
139 <condition property="catalina.home" value="${tomcat.installed.path}" else="${packages.home}/tomcat">
140 <and>
141 <isset property="tomcat.installed.path"/>
142 <not>
143 <equals arg1="" arg2="${tomcat.installed.path}"/>
144 </not>
145 </and>
146 </condition>
147
148 <property name="os.linux" value="Linux"/>
149 <property name="os.mac" value="Mac OS X"/>
150 <property name="os.solaris" value="SunOS"/>
151 <property name="os.unix" value="${os.linux},${os.mac},${os.solaris}"/>
152 <property name="os.windows" value="Windows 95,Windows 98,Windows 2000,Windows 2003,Windows XP,Windows NT,Windows ME,Windows Vista,Windows 7"/> <!-- check this!!!-->
153
154 <!-- this is true for linux and macs -->
155 <condition property="current.os.isunix">
156 <os family="unix"/>
157 </condition>
158
159 <condition property="current.os.isunixnotmac">
160 <and>
161 <os family="unix"/>
162 <not>
163 <os family="mac"/>
164 </not>
165 </and>
166 </condition>
167
168 <condition property="current.os.ismac">
169 <os family="mac"/>
170 </condition>
171
172 <condition property="current.os.iswindows">
173 <os family="windows"/>
174 </condition>
175
176 <!-- is there a better way to do this?? what about solaris?? -->
177 <condition property="os.bin.dir" value="windows">
178 <os family="windows"/>
179 </condition>
180 <condition property="os.bin.dir" value="darwin">
181 <os family="mac"/>
182 </condition>
183 <condition property="os.bin.dir" value="linux">
184 <and>
185 <os family="unix"/>
186 <not>
187 <os family="mac"/>
188 </not>
189 </and>
190 </condition>
191
192
193 <condition property="collection.building.disabled">
194 <and>
195 <isset property="disable.collection.building"/>
196 <istrue value="${disable.collection.building}"/>
197 </and>
198 </condition>
199
200 <condition property="collection.building.enabled">
201 <not>
202 <istrue value="${disable.collection.building}"/>
203 </not>
204 </condition>
205
206 <condition property="collection.building.enabled.windows">
207 <and>
208 <istrue value="${collection.building.enabled}"/>
209 <isset property="current.os.iswindows"/>
210 </and>
211 </condition>
212
213 <condition property="collection.building.enabled.unix">
214 <and>
215 <istrue value="${collection.building.enabled}"/>
216 <isset property="current.os.isunix"/>
217 </and>
218 </condition>
219
220 <condition property="static.arg" value="LDFLAGS=-static" else=" ">
221 <isset property="compile.static"/>
222 </condition>
223
224 <!-- If building a release then we want to adjust environment variables so that the support library can be see during compilation -->
225 <if><bool><isset property="use.support.lib"/></bool>
226 <property name="gnome-lib-dir" value="${basedir}/ext/gnome-lib-minimal/${os.bin.dir}"/>
227
228 <if><bool><isset property="env.CFLAGS"/></bool>
229 <property name="cflags.arg" value="CFLAGS=&quot;-I${gnome-lib-dir}/include ${env.CFLAGS}&quot;"/>
230 <else>
231 <property name="cflags.arg" value="CFLAGS=&quot;-I${gnome-lib-dir}/include&quot;"/>
232 </else>
233 </if>
234
235 <if><bool><isset property="env.CPPFLAGS"/></bool>
236 <property name="cppflags.arg" value="CPPFLAGS=&quot;-I${gnome-lib-dir}/include ${env.CPPFLAGS}&quot;"/>
237 <else>
238 <property name="cppflags.arg" value="CPPFLAGS=&quot;-I${gnome-lib-dir}/include&quot;"/>
239 </else>
240 </if>
241
242 <if><bool><isset property="env.CXXFLAGS"/></bool>
243 <property name="cxxflags.arg" value="CXXFLAGS=&quot;-I${gnome-lib-dir}/include ${env.CXXFLAGS}&quot;"/>
244 <else>
245 <property name="cxxflags.arg" value="CXXFLAGS=&quot;-I${gnome-lib-dir}/include&quot;"/>
246 </else>
247 </if>
248
249 <if><bool><isset property="env.LDFLAGS"/></bool>
250 <property name="ldflags.arg" value="LDFLAGS=&quot;-L${gnome-lib-dir}/lib ${env.LDFLAGS}&quot;"/>
251 <else>
252 <property name="ldflags.arg" value="LDFLAGS=&quot;-L${gnome-lib-dir}/lib&quot;"/>
253 </else>
254 </if>
255
256 <if><bool><isset property="env.PATH"/></bool>
257 <property name="path.arg" value="PATH=&quot;${gnome-lib-dir}/bin:${env.PATH}&quot;"/>
258 <else>
259 <property name="path.arg" value="PATH=&quot;${gnome-lib-dir}/bin&quot;"/>
260 </else>
261 </if>
262
263 <if><bool><isset property="env.PKG_CONFIG_PATH"/></bool>
264 <property name="pcpath.arg" value="PKG_CONFIG_PATH=&quot;${gnome-lib-dir}/lib/pkgconfig:${env.PKG_CONFIG_PATH}&quot;"/>
265 <else>
266 <property name="pcpath.arg" value="PKG_CONFIG_PATH=&quot;${gnome-lib-dir}/lib/pkgconfig&quot;"/>
267 </else>
268 </if>
269
270 <if><bool><equals arg1="${os.bin.dir}" arg2="darwin"/></bool>
271 <if><bool><isset property="env.DYLD_LIBRARY_PATH"/></bool>
272 <property name="ldlpath.arg" value="DYLD_LIBRARY_PATH=&quot;${gnome-lib-dir}/lib:${env.DYLD_LIBRARY_PATH}&quot;"/>
273 <else>
274 <property name="ldlpath.arg" value="DYLD_LIBRARY_PATH=&quot;${gnome-lib-dir}/lib&quot;"/>
275 </else>
276 </if>
277 <else>
278 <if><bool><isset property="env.LD_LIBRARY_PATH"/></bool>
279 <property name="ldlpath.arg" value="LD_LIBRARY_PATH=&quot;${gnome-lib-dir}/lib:${env.LD_LIBRARY_PATH}&quot;"/>
280 <else>
281 <property name="ldlpath.arg" value="LD_LIBRARY_PATH=&quot;${gnome-lib-dir}/lib&quot;"/>
282 </else>
283 </if>
284 </else>
285 </if>
286
287 <else>
288 <if><bool><isset property="env.CFLAGS"/></bool>
289 <property name="cflags.arg" value="CFLAGS=&quot;${env.CFLAGS}&quot;"/>
290 <else>
291 <property name="cflags.arg" value=" "/>
292 </else>
293 </if>
294
295 <if><bool><isset property="env.CPPFLAGS"/></bool>
296 <property name="cppflags.arg" value="CPPFLAGS=&quot;${env.CPPFLAGS}&quot;"/>
297 <else>
298 <property name="cppflags.arg" value=" "/>
299 </else>
300 </if>
301
302 <if><bool><isset property="env.CXXFLAGS"/></bool>
303 <property name="cxxflags.arg" value="CXXFLAGS=&quot;${env.CXXFLAGS}&quot;"/>
304 <else>
305 <property name="cxxflags.arg" value=" "/>
306 </else>
307 </if>
308
309 <if><bool><isset property="env.LDFLAGS"/></bool>
310 <property name="ldflags.arg" value="LDFLAGS=&quot;${env.LDFLAGS}&quot;"/>
311 <else>
312 <property name="ldflags.arg" value=" "/>
313 </else>
314 </if>
315
316 <if><bool><isset property="env.PATH"/></bool>
317 <property name="path.arg" value="PATH=&quot;${env.PATH}&quot;"/>
318 <else>
319 <property name="path.arg" value=" "/>
320 </else>
321 </if>
322
323 <if><bool><isset property="env.PKG_CONFIG_PATH"/></bool>
324 <property name="pcpath.arg" value="PKG_CONFIG_PATH=&quot;${env.PKG_CONFIG_PATH}&quot;"/>
325 <else>
326 <property name="pcpath.arg" value=" "/>
327 </else>
328 </if>
329
330 <if><bool><equals arg1="${os.bin.dir}" arg2="darwin"/></bool>
331 <if><bool><isset property="env.DYLD_LIBRARY_PATH"/></bool>
332 <property name="ldlpath.arg" value="DYLD_LIBRARY_PATH=&quot;${env.DYLD_LIBRARY_PATH}&quot;"/>
333 <else>
334 <property name="ldlpath.arg" value=" "/>
335 </else>
336 </if>
337 <else>
338 <if><bool><isset property="env.LD_LIBRARY_PATH"/></bool>
339 <property name="ldlpath.arg" value="LD_LIBRARY_PATH=&quot;${env.LD_LIBRARY_PATH}&quot;"/>
340 <else>
341 <property name="ldlpath.arg" value=" "/>
342 </else>
343 </if>
344 </else>
345 </if>
346 </else>
347 </if>
348 <property name="allargs" value="${cflags.arg} ${cxxflags.arg} ${cppflags.arg} ${ldflags.arg} ${path.arg} ${ldlpath.arg} ${pcpath.arg}"/>
349
350 <condition property="gs2.opt.args" value= " " else="--disable-mg --disable-mgpp --disable-accentfold --disable-gdbm --disable-sqlite">
351 <istrue value="${with.jni}"/>
352 </condition>
353 <condition property="gs2.compile.target" value="with-jni" else="without-jni">
354 <istrue value="${with.jni}"/>
355 </condition>
356 <condition property="gs2.install.target" value="install-with-jni" else="install-without-jni">
357 <istrue value="${with.jni}"/>
358 </condition>
359 <condition property="gs2.windows.enablejni" value="1" else="0">
360 <istrue value="${with.jni}"/>
361 </condition>
362 <condition property="gs2.windows.enablemg" value="1" else="0">
363 <istrue value="${with.jni}"/>
364 </condition>
365 <condition property="gs2.windows.enablemgpp" value="1" else="0">
366 <istrue value="${with.jni}"/>
367 </condition>
368 <!-- Should accent folding not also be set here ?? -->
369 <condition property="gs2.windows.usegdbm" value="1" else="0">
370 <istrue value="${with.jni}"/>
371 </condition>
372 <condition property="gs2.windows.usesqlite" value="1" else="0">
373 <istrue value="${with.jni}"/>
374 </condition>
375
376 <!-- where is search4j tool -->
377 <condition property="search4j.exec" value="bin/search4j.exe" else="bin/search4j">
378 <isset property="current.os.iswindows"/>
379 </condition>
380
381
382 <!-- ============= Base dirs for each package and component ============ -->
383 <property name="src.gsdl3.home" value="${src.home}/org/greenstone/gsdl3"/>
384 <property name="anttasks.home" value="${src.home}/org/greenstone/anttasks"/>
385 <property name="gli.home" value="${basedir}/gli"/>
386 <property name="javagdbm.home" value="${src.packages.home}/javagdbm"/>
387
388 <condition property="common.src.home" value="${basedir}/common-src" else="${gs2build.home}${file.separator}common-src">
389 <istrue value="${disable.collection.building}"/>
390 </condition>
391
392 <property name="build.src.home" value="${gs2build.home}/build-src"/>
393 <property name="gdbm.home" value="${common.src.home}/packages/gdbm"/>
394 <property name="mg.home" value="${common.src.home}/indexers/mg"/>
395 <property name="mgpp.home" value="${common.src.home}/indexers/mgpp"/>
396 <property name="lucene.home" value="${common.src.home}/indexers/lucene-gs"/>
397
398 <!-- ==================== Compilation Control Options ==================== -->
399
400 <!--
401
402 These properties control option settings on the Javac compiler when it
403 is invoked using the <javac> task.
404
405 compile.debug Should compilation include the debug option?
406
407 compile.deprecation Should compilation include the deprecation option?
408
409 compile.optimize Should compilation include the optimize option?
410
411 -->
412
413 <property name="compile.debug" value="true"/>
414 <property name="compile.deprecation" value="true"/>
415 <property name="compile.optimize" value="true"/>
416
417 <!--
418
419 Rather than relying on the CLASSPATH environment variable, Ant includes
420 features that makes it easy to dynamically construct the classpath you
421 need for each compilation. The example below constructs the compile
422 classpath to include the servlet.jar file, as well as the other components
423 that Tomcat makes available to web applications automatically, plus anything
424 that you explicitly added.
425
426 -->
427
428 <!-- All elements that Tomcat 5 exposes to applications -->
429 <path id="tomcat5">
430 <pathelement location="${catalina.home}/common/classes"/>
431 <fileset dir="${catalina.home}/common/endorsed">
432 <include name="*.jar"/>
433 </fileset>
434 <fileset dir="${catalina.home}/common/lib">
435 <include name="*.jar"/>
436 </fileset>
437 <!-- seems to be empty, but will leave in just in case some people make use of this to customise their install: -->
438 <pathelement location="${catalina.home}/shared/classes"/>
439 <fileset dir="${catalina.home}/shared/lib">
440 <include name="*.jar"/>
441 </fileset>
442 </path>
443
444 <!-- All elements that Tomcat 7 exposes to applications -->
445 <path id="tomcat7">
446 <fileset dir="${catalina.home}/lib">
447 <include name="*.jar"/>
448 </fileset>
449 </path>
450
451 <path id="compile.classpath">
452 <!-- Include all jar files and libraries in our jni lib directory -->
453 <pathelement location="${lib.jni}"/>
454 <fileset dir="${lib.jni}">
455 <include name="*.jar"/>
456 </fileset>
457 <!-- Include all jar files in our web lib directory -->
458 <pathelement location="${web.lib}"/>
459 <fileset dir="${web.lib}">
460 <include name="*.jar"/>
461 </fileset>
462
463 <pathelement location="${lib.java}"/>
464 <fileset dir="${lib.java}">
465 <include name="*.jar"/>
466 </fileset>
467
468 <!-- include the jar files from the source packages -->
469 <!-- mg and mgpp get installed into lib/jni but they may not be there yet
470 so we add them in by name -->
471 <!-- *** is there any way to make this optional, based on ${with.jni}? -->
472 <pathelement location="${lib.jni}/mg.jar"/>
473 <pathelement location="${lib.jni}/mgpp.jar"/>
474
475 <!-- Include all elements that Tomcat exposes to applications -->
476 <path refid="tomcat${tomcat.version.major}"/>
477
478 </path>
479
480 <path id="local.tomcat.classpath">
481 <!-- explicitly include the jni java wrappers in the classpath -->
482 <pathelement location="${lib.jni}"/>
483 <fileset dir="${lib.jni}">
484 <include name="*.jar"/>
485 </fileset>
486
487 <pathelement location="${web.lib}"/>
488 <fileset dir="${web.lib}">
489 <include name="derby.jar"/>
490 </fileset>
491 </path>
492
493 <path id="local.tomcat.path">
494 <pathelement location="${basedir}/bin/script"/>
495 <pathelement location="${basedir}/bin"/>
496 <pathelement location="${lib.jni}"/>
497 <pathelement path="${env.PATH}"/>
498 <pathelement path="${env.Path}"/>
499 <pathelement path="${wn.home}/bin"/>
500 </path>
501
502 <target name="test-setup">
503 <echo>ant java version=${ant.java.version}</echo>
504 <echo>is unix : ${current.os.isunix}</echo>
505 <echo>is mac : ${current.os.ismac}</echo>
506 <echo>is unixnotmac : ${current.os.isunixnotmac}</echo>
507 <echo>is windows : ${current.os.iswindows}</echo>
508 <echo>os.unix: ${os.unix}</echo>
509 </target>
510
511 <!-- ==================== Primary and Global Targets ============================= -->
512
513 <target name="prepare" depends="accept-properties,init,prepare-core,prepare-packages,prepare-common-src,prepare-collection-building,prepare-tomcat,prepare-axis,prepare-web,prepare-collections, prepare-flax"
514 description="Use this when you first checkout the code: 'ant prepare install'. This will do some additional subversion checkouts and downloads, so you need to be online to run this.">
515
516 <!-- make sure .sh files are executable -->
517 <chmod dir="${basedir}" perm="ugo+rx"
518 includes="*.sh"/>
519 <chmod dir="${basedir}/bin/script" perm="ugo+rx"
520 includes="*.sh,*.pl"/>
521 </target>
522
523 <!-- install-common-src and install-collection-building are mutually exclusive and either one or the other will be done depending on whether collection building is enabled or not -->
524 <target name="install" depends="init,install-common-src,install-collection-building,install-runtime"
525 description="Install Greenstone 3. Use this when you first checkout the code: 'ant prepare new-install'."/>
526
527 <target name="install-common-src" depends="init"
528 description="Install (configure, compile, install) only the common-src package (shared code from Greenstone 2). " >
529 <antcall target="configure-common-src"/>
530 <antcall target="compile-common-src"/>
531 <antcall target="install-auxiliary-jar-files"/>
532 <antcall target="install-jni-files"/>
533 </target>
534
535 <target name="install-collection-building" depends="init" if="collection.building.enabled"
536 description="Install (configure, compile, install) the Greenstone 2 collection building package." >
537 <antcall target="configure-collection-building"/>
538 <antcall target="tweak-makefiles" />
539 <antcall target="compile-collection-building"/>
540 </target>
541
542
543 <target name="install-runtime" depends="init,configure,configure-packages,configure-core,compile-web,compile-packages,compile-core,compile-classpath-jars"
544 description="Install (configure, compile, install) the runtime system. Needs either common-src or collection-building to have been installed first." />
545
546 <target name="svnupdate" depends="init,svnupdate-packages,svnupdate-core,svnupdate-common-src,svnupdate-collection-building,svnupdate-web"
547 description="Do a `svn update` for all sources. Doesn't recompile the code. You need to be online to run this."/>
548
549 <target name="configure" depends="init,configure-tomcat,configure-web"
550 description="Configure the installation (not the C++ code). Includes setting up config files. Should be re-run if you change the build.properties file, including if you change the port number."/>
551
552 <target name="clean" depends="init,clean-packages,clean-core,clean-common-src,clean-collection-building,clean-classpath-jars"
553 description="Remove all old compiled code. Includes runtime and collection-building if necessary"/>
554
555 <target name="distclean" depends="init,distclean-packages,clean-core,distclean-common-src,distclean-collection-building,clean-classpath-jars"
556 description="Remove all compiled code and also any Makefiles etc generated during configure-c++. Includes runtime and collection-building as necessary"/>
557
558 <target name="update" depends="init,svnupdate,clean,install"
559 description="Update (thru Subversion) all the source (including common-src or collection-building, and runtime), then clean, and re-install. To do this without any SVN updates, run it like 'ant -Dnosvn.mode=yes update'"/>
560
561
562 <target name="perl-for-building" depends="init">
563 <!-- uses perl.path if set in build.properties, otherwise try for
564 environment variable PERLPATH, and failing that assumes 'perl'
565 is on environment PATH -->
566 <!-- if, outside build.properties, we only set perl.path if we have gs2build/build-src (collection building), then we won't set perl.path in a (flax) binary, since it doesn't have build-src -->
567 <if><bool><available file="${gs2build.home}"/></bool>
568
569 <if><bool><not><isset property="perl.path"/></not></bool>
570
571 <if>
572 <bool>
573 <and>
574 <isset property="env.PERLPATH"/>
575 <not><equals arg1="${env.PERLPATH}" arg2=""/></not>
576 </and>
577 </bool>
578 <property name="perl.path" value="${env.PERLPATH}"/>
579 <else>
580 <echo>
581 Using PATH environment variable to locate Perl.
582 </echo>
583 <exec executable="which" os="${os.unix}" spawn="false" outputproperty="full.perl.path">
584 <arg value="perl" />
585 </exec>
586
587 <exec executable="${gs2build.home}/bin/windows/which" os="${os.windows}" spawn="false" outputproperty="full.perl.path">
588 <arg value="perl" />
589 </exec>
590
591 <stringutil string="${full.perl.path}" property="perl.path">
592 <replace regex="\/[^\/]*$" replacement="" />
593 </stringutil>
594 <if><bool><istrue value="${current.os.isunix}"/></bool>
595
596 <if><bool><not><equals arg1="${full.perl.path}" arg2="/usr/bin/perl"/></not></bool>
597 <echo>
598 Non-standard location of Perl found: ${full.perl.path}
599 Set the environment variable PERLPATH or the perl.path property in
600 build.properties to explicitly control the version of Perl used.
601 </echo>
602 </if>
603 </if>
604 </else>
605 </if>
606 </if>
607
608 <!-- full.perl.path is for pretty-printing only, e.g. used in target "start" -->
609 <if><bool><isset property="perl.path"/></bool>
610 <property name="full.perl.path" value="${perl.path}${file.separator}perl"/>
611 <else>
612 <property name="full.perl.path" value="perl (will use the enviroment variable PATH to find this executable)"/>
613 </else>
614 </if>
615
616 <!-- gs2build not available, perl.path -->
617 <else>
618 <property name="perl.path" value=""/>
619 </else>
620 </if>
621 </target>
622
623 <target name="start" depends="init,configure-web,start-tomcat"
624 description="Startup the Tomcat server." >
625 <echo>${app.name} (${app.version}) server running using Apache Tomcat and Java</echo>
626 <echo>Tomcat: ${catalina.home}</echo>
627 <echo>Java : ${java.home}</echo>
628 <if><bool><available file="${build.src.home}"/></bool>
629 <echo>Perl : ${full.perl.path}</echo>
630 </if>
631 <if><bool><isset property="install.flax"/></bool>
632 <property name="url" value="http://${tomcat.server}:${tomcat.port}${app.path}/flax"/>
633 <else>
634 <property name="url" value="http://${tomcat.server}:${tomcat.port}${app.path}/"/>
635 </else>
636 </if>
637 <echo>URL : ${url}</echo>
638 <!-- assuming that index.html is not needed here -->
639 </target>
640
641 <target name="stop" depends="init,stop-tomcat"
642 description="Shutdown the Tomcat server."/>
643
644 <target name="restart" description="Shutdown and restart Tomcat" depends="init,stop,start"/>
645
646
647 <!-- =========== Help targets =================================== -->
648
649 <property name="install-command" value="ant [options] prepare install"/>
650
651 <target name="usage" description="Print a help message">
652 <echo message=" Execute 'ant -projecthelp' for a list of targets."/>
653 <echo message=" Execute 'ant -help' for Ant help."/>
654 <echo>
655 To install Greenstone3, run '${install-command}'.
656 There are properties defined in build.properties. The install
657 process will ask you if these properties are set correctly.
658 To avoid this prompt, use the '-Dproperties.accepted=yes'
659 option.
660 To log the output, use the '-logfile build.log' option.
661 The README.txt file has more information about the ant targets
662 and install process.
663 </echo>
664 </target>
665
666 <target name="help" depends="usage" description="Print a help message"/>
667
668 <target name="debug" depends="init" description="Display all the currently used properties">
669 <echoproperties/>
670 </target>
671
672 <!-- ====== initialization and setup targets ================== -->
673
674 <target name="accept-properties" unless="properties.accepted">
675 <input addproperty="properties.ok" validargs="y,n">The following properties (among others) are being used from a build.properties file found in this directory:
676 tomcat.server=${tomcat.server}
677 tomcat.port=${tomcat.port}
678 tomcat.installed.path=${tomcat.installed.path} (this is the location of Tomcat's base dir if it is already installed)
679 proxy.host=${proxy.host}
680 proxy.port=${proxy.port}
681 disable.collection.building=${disable.collection.building}
682 If these are not acceptable, please change them and rerun this target. Continue [y/n]?
683 </input>
684 <condition property="do.abort">
685 <equals arg1="n" arg2="${properties.ok}"/>
686 </condition>
687 <fail if="do.abort">Build aborted by user. Please change your properties settings and re-run the target</fail>
688 </target>
689
690 <!-- this sets up some initial properties -->
691 <target name="init">
692
693 <!-- has the gs3-setup script been run?? -->
694 <condition property="gs3-setup-not-done">
695 <not>
696 <isset property="env.GSDL3HOME"/>
697 </not>
698 </condition>
699
700 <!--<fail if="gs3-setup-not-done" message="please run 'gs3-setup' (Windows) or 'source gs3-setup.sh' (Linux/Mac) before running this target."/>-->
701
702 <condition property="java.too.old">
703 <or>
704 <equals arg1="1.1" arg2="${ant.java.version}"/>
705 <equals arg1="1.2" arg2="${ant.java.version}"/>
706 <equals arg1="1.3" arg2="${ant.java.version}"/>
707 </or>
708 </condition>
709 <fail if="java.too.old" message="You need Java 1.4 or greater to run Greenstone 3"/>
710
711 <available file="${basedir}/gli" property="gli.present"/>
712 <available file="${basedir}/common-src" property="common.src.present"/>
713 <available file="${basedir}/gs2build" property="gs2build.present"/>
714
715 <condition property="tomcat.islocal">
716 <or>
717 <not><isset property="tomcat.installed.path"/></not>
718 <equals arg1="" arg2="${tomcat.installed.path}"/>
719 </or>
720 </condition>
721
722 <echo>tomcat.port = ${tomcat.port}</echo>
723
724 <condition property="proxy.present">
725 <and>
726 <isset property="proxy.host"/>
727 <not><equals arg1="" arg2="${proxy.host}"/></not>
728 </and>
729 </condition>
730
731 <!--
732 the next block checks if the bundled tomcat is present in the 'packages' directory,
733 and checks for the lethal combination of tomcat 7 and java 1.4. Test for
734 tomcat6 is based on the presence of a file inserted by greenstone into the tomcat6
735 download, as there is no other surefire way to check tomcat version under java 1.4
736 -->
737 <condition property="packages.tomcat.ispresent" value="true" else="false">
738 <available file="packages/tomcat"/>
739 </condition>
740 <condition property="packages.tomcat.istomcat7" value="true" else="false">
741 <available file="packages/tomcat/tomcat7.txt"/>
742 </condition>
743 <if>
744 <bool>
745 <and>
746 <istrue value="${packages.tomcat.ispresent}"/>
747 <istrue value="${packages.tomcat.istomcat7}"/>
748 <equals arg1="1.4" arg2="${ant.java.version}"/>
749 </and>
750 </bool>
751 <fail>Your Java (version 1.4) is too old to work with the bundled Apache Tomcat (version 6). Please upgrade to Java version 1.5 or greater. Alternatively, you may remove the bundled Apache Tomcat from the 'packages' folder and then run 'ant prepare-tomcat'.</fail>
752 </if>
753
754 </target>
755
756 <target name="setup-proxy" depends="init" if="proxy.present">
757 <condition property="ask.user">
758 <or>
759 <equals arg1="" arg2="${proxy.user}"/>
760 <equals arg1="" arg2="${proxy.password}"/>
761 </or>
762 </condition>
763
764 <getuserandpassword message="Using proxy: ${proxy.host}:${proxy.port}" if="ask.user" username="${proxy.user}" userproperty="proxy.username" pwordproperty="proxy.password"/>
765 <mysetproxy proxyhost="${proxy.host}" proxyport="${proxy.port}" proxyuser="${proxy.username}" proxypassword="${proxy.password}"/>
766 </target>
767
768 <!-- ========== Web app Targets ================================ -->
769
770 <target name="prepare-web" depends="init">
771 <mkdir dir="${web.home}/applet"/>
772 <mkdir dir="${web.home}/logs"/>
773 </target>
774
775 <!-- if we are using java 1.5+, we need the xalan.jar file in web/WEB-INF/lib, but if we are using java 1.4, we can't have it there.
776 The test for whether we need it assumes we won't be trying to compile GS3 against Java versions less than 1.4. -->
777 <target name="configure-java-version" depends="init"
778 description="Activates or deactivates some jar libraries as needed depending on your java version">
779
780 <available property="have.xalan.jar" file="${web.lib}/xalan.jar"/>
781 <condition property="need.xalan.jar">
782 <or>
783 <not><equals arg1="1.4" arg2="${ant.java.version}"/></not>
784 </or>
785 </condition>
786
787 <!-- if they have xalan.jar but dont need it -->
788 <if>
789 <bool>
790 <and>
791 <isset property="have.xalan.jar"/>
792 <not><isset property="need.xalan.jar"/></not>
793 </and>
794 </bool>
795 <antcall target="deactivate-xalan-jar"/>
796 </if>
797
798 <!-- if they need xalan.jar but dont have it -->
799 <if>
800 <bool>
801 <and>
802 <not><isset property="have.xalan.jar"/></not>
803 <isset property="need.xalan.jar"/>
804 </and>
805 </bool>
806 <antcall target="activate-xalan-jar"/>
807 </if>
808
809 </target>
810
811 <target name="activate-xalan-jar">
812 <echo>activating xalan.jar</echo>
813 <copy file="${web.lib}/xalan.jar.tmp" tofile="${web.lib}/xalan.jar"/>
814 <if>
815 <bool>
816 <and>
817 <isset property="current.os.ismac"/>
818 <available file="${catalina.home}/common/endorsed" type="dir"/>
819 </and>
820 </bool>
821 <copy file="${web.lib}/xalan.jar.tmp" tofile="${catalina.home}/common/endorsed/xalan.jar"/>
822 </if>
823 </target>
824
825 <target name="deactivate-xalan-jar">
826 <echo>deactivating xalan.jar</echo>
827 <delete file="${web.lib}/xalan.jar"/>
828 <!-- should we be deleting common/endorsed/xalan.jar on mac?? -->
829 </target>
830
831
832 <target name="prepare-collections" depends="init">
833 <property name="collect.dir" value="${web.home}/sites/localsite/collect"/>
834 <property name="index.zip" value="index.zip"/>
835
836 <echo message="installing collections..."/>
837 <antcall target="gs2mgdemo-install"/>
838 <antcall target="gs2mgppdemo-install"/>
839 <antcall target="gberg-install"/>
840 </target>
841
842 <target name="gs2mgdemo-prepare" if="collect.dir">
843 <property name="gs2mgdemo.dir" value="${collect.dir}/gs2mgdemo"/>
844
845 <condition property="gs2mgdemo.present">
846 <and>
847 <available file="${gs2mgdemo.dir}/${index.zip}"/>
848 </and>
849 </condition>
850 </target>
851
852 <target name="gs2mgdemo-install" if="gs2mgdemo.present" depends="gs2mgdemo-prepare">
853 <echo> installing gs2mgdemo</echo>
854 <unzip dest="${gs2mgdemo.dir}" src="${gs2mgdemo.dir}/${index.zip}" />
855 <echo>collection gs2mgdemo installed</echo>
856 </target>
857
858 <target name="gs2mgppdemo-prepare" if="collect.dir">
859 <property name="gs2mgppdemo.dir" value="${collect.dir}/gs2mgppdemo"/>
860
861 <condition property="gs2mgppdemo.present">
862 <and>
863 <available file="${gs2mgppdemo.dir}/${index.zip}"/>
864 </and>
865 </condition>
866 </target>
867
868 <target name="gs2mgppdemo-install" if="gs2mgppdemo.present" depends="gs2mgppdemo-prepare">
869 <unzip dest="${gs2mgppdemo.dir}" src="${gs2mgppdemo.dir}/${index.zip}" />
870 <echo>collection gs2mgppdemo installed</echo>
871 </target>
872
873 <target name="gberg-prepare" if="collect.dir">
874 <property name="gberg.dir" value="${collect.dir}/gberg"/>
875 <available file="${gberg.dir}/index/${index.zip}" property="gberg.present"/>
876 </target>
877
878 <target name="gberg-install" if="gberg.present" depends="gberg-prepare">
879 <unzip dest="${gberg.dir}/index" src="${gberg.dir}/index/${index.zip}"/>
880 <echo>collection gberg installed</echo>
881 </target>
882
883 <target name="configure-web" depends="init,perl-for-building"
884 description="Configure only the web app config files">
885 <!-- we want a unix path in the global.properties file -->
886 <pathconvert targetos="unix" property="src.gsdl3.home.unix">
887 <path path="${web.home}"/>
888 </pathconvert>
889 <stringutil string="${perl.path}" property="escaped.perl.path">
890 <replace regex="\\" replacement="\\\\" />
891 </stringutil>
892
893 <filter token="gsdl3home" value="${src.gsdl3.home.unix}"/>
894 <filter token="gsdl3version" value="${app.version}"/>
895 <filter token="tomcat.server" value="${tomcat.server}"/>
896 <filter token="tomcat.port" value="${tomcat.port}"/>
897 <filter token="perlpath" value="${escaped.perl.path}"/>
898 <copy file="${basedir}/resources/java/global.properties.in" tofile="${web.classes}/global.properties" filtering="true" overwrite="true"/>
899 <copy file="${basedir}/resources/java/log4j.properties.in" tofile="${web.classes}/log4j.properties" filtering="true" overwrite="true"/>
900 <chmod file="${web.classes}/global.properties" perm="600"/>
901 <chmod file="${web.classes}/log4j.properties" perm="600"/>
902 </target>
903
904 <target name="compile-web" depends="init">
905 <javac srcdir="${web.classes}"
906 destdir="${web.classes}"
907 debug="${compile.debug}"
908 deprecation="${compile.deprecation}"
909 optimize="${compile.optimize}">
910 <classpath><path refid="compile.classpath"/></classpath>
911 </javac>
912 </target>
913
914 <target name="compile-classpath-jars" depends="init">
915 <if><bool><available file="admin/cp.mf"/></bool>
916 <jar destfile="admin/cp.jar" manifest="admin/cp.mf"/>
917 </if>
918 <if><bool><available file="${lib.java}/cp.mf"/></bool>
919 <jar destfile="${lib.java}/cp.jar" manifest="${lib.java}/cp.mf"/>
920 </if>
921 <if><bool><available file="${lib.jni}/cp.mf"/></bool>
922 <jar destfile="${lib.jni}/cp.jar" manifest="${lib.jni}/cp.mf"/>
923 </if>
924 <if><bool><available file="${web.lib}/cp.mf"/></bool>
925 <jar destfile="${web.lib}/cp.jar" manifest="${web.lib}/cp.mf"/>
926 </if>
927 <jar destfile="cp.jar">
928 <manifest>
929 <attribute name="Class-Path" value="server.jar admin/cp.jar lib/java/cp.jar lib/jni/cp.jar web/WEB-INF/lib/cp.jar"/>
930 </manifest>
931 </jar>
932 </target>
933
934 <target name="clean-classpath-jars" depends="init">
935 <delete file="admin/cp.jar"/>
936 <delete file="${lib.java}/cp.jar"/>
937 <delete file="${lib.jni}/cp.jar"/>
938 <delete file="${web.lib}/cp.jar"/>
939 <delete file="cp.jar"/>
940 </target>
941
942
943 <target name="svnupdate-web" unless="nosvn.mode">
944 <exec executable="svn">
945 <arg value="update"/>
946 <arg value="${web.home}"/>
947 <arg value="-r"/><arg value="${branch.revision}"/>
948 </exec>
949 </target>
950
951 <target name="update-web" depends="init,svnupdate-web,configure-web"
952 description="update only the web stuff (config files)"/>
953
954 <!-- ======================= Tomcat Targets ========================== -->
955
956 <!-- this target downloads and installs Tomcat -->
957 <!-- we download tomcat (version 7 for Java 1.5 and later, version 5 for Java 1.4 plus the 1.4 compatibility package). -->
958 <target name="prepare-tomcat" depends="init,setup-proxy" if="tomcat.islocal"
959 description="downloads the appropriate version of Tomcat (Tomcat 5 if using Java 1.4, Tomcat 7 if using Java 1.5 or higher). If you want to change which version of Java you are using between 1.4 and 1.5/7 then you need to run prepare-tomcat">
960 <if>
961 <bool>
962 <not><available file="${packages.home}/tomcat/.flagfile"/></not>
963 </bool>
964
965 <!-- check that packages dir is there -->
966 <mkdir dir="${packages.home}"/>
967 <get src="http://www.greenstone.org/gs3files/${tomcat.version}.zip"
968 dest="${packages.home}/${tomcat.version}.zip"
969 usetimestamp="true"/>
970 <unzip src="${packages.home}/${tomcat.version}.zip"
971 dest="${packages.home}"/>
972
973 <!-- If we are using Java 1.4, we'd be using tomcat 5.5 in which case
974 we would need to have the tomcat compat package to work with Java 1.4-->
975 <if>
976 <bool><equals arg1="1.4" arg2="${ant.java.version}"/></bool>
977 <get src="http://www.greenstone.org/gs3files/${tomcat.version}-compat.zip"
978 dest="${packages.home}/${tomcat.version}-compat.zip"
979 usetimestamp="true"/>
980 <unzip src="${packages.home}/${tomcat.version}-compat.zip"
981 dest="${packages.home}"/>
982 </if>
983
984 <!-- delete any existing tomcat -->
985 <delete dir="${packages.home}/tomcat"/>
986 <move todir="${packages.home}/tomcat">
987 <fileset dir="${packages.home}/${tomcat.version}"/>
988 </move>
989 <!--
990 <copy file="${basedir}/resources/tomcat/setclasspath.bat"
991 tofile="${packages.home}/tomcat/bin/setclasspath.bat"
992 overwrite="true"/>
993 <copy file="${basedir}/resources/tomcat/setclasspath.sh"
994 tofile="${packages.home}/tomcat/bin/setclasspath.sh"
995 overwrite="true"/>
996 -->
997 <!-- make sure we have execute permission for the .sh files -->
998 <chmod dir="${packages.home}/tomcat/bin" perm="ugo+rx"
999 includes="*.sh"/>
1000
1001 <echo file="${packages.home}/tomcat/.flagfile">
1002 the timestamp of this file is the time that tomcat was extracted from the zip files.
1003 it is used to figure out whether the files need to be refreshed or not in `ant prepare-tomcat`
1004 </echo>
1005
1006 <!-- this is not strictly a prepare tomcat thing, but if one changes
1007 Java, then they need to change tomcat as well, so might as well call
1008 it here -->
1009 <antcall target="configure-java-version"/>
1010 <else>
1011 <echo>Tomcat has been prepared, will not prepare</echo>
1012 <echo>Delete ${packages.home}/tomcat/.flagfile to force refresh</echo>
1013 </else>
1014
1015 </if>
1016
1017 </target>
1018
1019 <target name="configure-tomcat" depends="init,configure-tomcat-local,configure-tomcat-external"/>
1020
1021 <target name="configure-tomcat-local" depends="init" if="tomcat.islocal">
1022 <!-- re-setup the server.xml file -->
1023 <copy file="${basedir}/resources/tomcat/server_tomcat${tomcat.version.major}.xml"
1024 tofile="${packages.home}/tomcat/conf/server.xml" overwrite="true">
1025 <filterset>
1026 <filter token="port" value="${tomcat.port}"/>
1027 <filter token="shutdown-port" value="${tomcat.shutdown.port}"/>
1028 </filterset>
1029 </copy>
1030 <!-- set up the greenstone3 context -->
1031 <copy file="${basedir}/resources/tomcat/greenstone3.xml" tofile="${packages.home}/tomcat/conf/Catalina/localhost/greenstone3.xml" overwrite="true">
1032 <filterset>
1033 <filter token="gsdl3webhome" value="${web.home}"/>
1034 <filter token="privilegedattribute" value ="${privileged.attribute}"/>
1035 </filterset>
1036 </copy>
1037 </target>
1038
1039 <target name="configure-tomcat-external" depends="init" unless="tomcat.islocal">
1040 <!-- re-setup the server.xml file -->
1041 <!-- need to edit the config file, or do we get the user to do this???-->
1042 </target>
1043
1044
1045
1046<!-- Another way: http://ptrthomas.wordpress.com/2006/03/25/how-to-start-and-stop-tomcat-from-ant/ -->
1047 <target name="start-tomcat" description="Startup only Tomcat" depends="init" if="tomcat.islocal">
1048 <property name="tomcat.classpath" refid="local.tomcat.classpath"/>
1049 <property name="tomcat.path" refid="local.tomcat.path"/>
1050 <property name="catalina.opts" value="-Djava.util.prefs.syncInterval=2000000 -DGSDL3HOME=$GSDL3HOME -DGSDLOS=$GSDLOS -DPATH=$PATH -Xmx400M"/>
1051
1052 <echo file="${catalina.home}/bin/setenv.bat">set CLASSPATH=${tomcat.classpath}</echo>
1053 <echo file="${catalina.home}/bin/setenv.sh">export CLASSPATH=${tomcat.classpath}</echo>
1054
1055 <exec executable="${catalina.home}/bin/startup.sh" os="${os.unix}" dir="${catalina.home}/bin" spawn="false">
1056 <!--<env key="GSDLOS" value="linux"/> do we need this?? -->
1057 <env key="GSDL3HOME" value="${basedir}"/>
1058 <env key="PATH" path="${tomcat.path}"/>
1059 <env key="CATALINA_OPTS" value="${catalina.opts}"/>
1060 <env key="CATALINA_HOME" value="${catalina.home}"/>
1061 <env key="CLASSPATH" path="${tomcat.classpath}"/>
1062 <env key="LD_LIBRARY_PATH" path="${env.LD_LIBRARY_PATH}:${lib.jni}"/>
1063 <env key="DYLD_LIBRARY_PATH" path="${env.DYLD_LIBRARY_PATH}:${lib.jni}:${gdbm.home}/lib"/> <!-- for mac os --> <!-- need gdbm here these days ??-->
1064 <env key="WNHOME" path="${wn.home}"/>
1065 </exec>
1066 <exec executable="${catalina.home}/bin/startup.bat" os="${os.windows}" dir="${catalina.home}/bin" spawn="false">
1067 <env key="GSDLOS" value="windows"/>
1068 <env key="GSDL3HOME" value="${basedir}"/>
1069 <env key="Path" path="${tomcat.path}"/>
1070 <env key="PATH" path="${tomcat.path}"/>
1071 <env key="CATALINA_OPTS" value="${catalina.opts}"/>
1072 <env key="CATALINA_HOME" value="${catalina.home}"/>
1073 <env key="CLASSPATH" path="${tomcat.classpath}"/>
1074 </exec>
1075 <!-- wait for the server to startup in case other targets need it running -->
1076 <waitfor maxwait="5" maxwaitunit="second">
1077 <and>
1078 <socket server="${tomcat.server}" port="${tomcat.port}"/>
1079 <http url="http://${tomcat.server}:${tomcat.port}${app.path}/index.html"/>
1080 </and>
1081 </waitfor>
1082 </target>
1083
1084 <!--ant task http: http://www.jajakarta.org/ant/ant-1.6.1/docs/ja/manual/api/org/apache/tools/ant/taskdefs/condition/Http.html-->
1085 <target name="reconfigure" description="Reconfigure the message router">
1086 <waitfor maxwait="5" maxwaitunit="second">
1087 <http url="http://${tomcat.server}:${tomcat.port}${app.path}${server.default.servlet}?a=s&amp;sa=c"/>
1088 </waitfor>
1089 </target>
1090
1091 <!--Command-line args to Ant: http://www.jguru.com/faq/view.jsp?EID=471794-->
1092 <target name="reconfigure-collection" description="Reconfigure the collection">
1093 <waitfor maxwait="5" maxwaitunit="second">
1094 <http url="http://${tomcat.server}:${tomcat.port}${app.path}${server.default.servlet}?a=s&amp;sa=c&amp;sc=${collection}"/>
1095 </waitfor>
1096 </target>
1097
1098 <!-- windows: do we want to launch a webrowser?? -->
1099 <!-- shouldn't this test whether anything is running first? -->
1100 <target name="stop-tomcat" description="Shutdown only Tomcat" depends="init" if="tomcat.islocal">
1101 <exec executable="${catalina.home}/bin/shutdown.sh" os="${os.unix}" dir="${catalina.home}/bin" spawn="false">
1102 <env key="CATALINA_HOME" value="${catalina.home}"/>
1103 </exec>
1104 <exec executable="${catalina.home}/bin/shutdown.bat" os="${os.windows}" dir="${catalina.home}/bin" spawn="false">
1105 <env key="CATALINA_HOME" value="${catalina.home}"/>
1106 </exec>
1107 </target>
1108
1109 <target name="restart-tomcat" description="Shutdown and restart only Tomcat" depends="init,stop-tomcat,start-tomcat"/>
1110
1111 <target name="setup-catalina-ant-tasks">
1112 <!-- Configure the custom Ant tasks for the Tomcat Manager application -->
1113 <taskdef name="deploy" classname="org.apache.catalina.ant.DeployTask"
1114 classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
1115 <taskdef name="list" classname="org.apache.catalina.ant.ListTask"
1116 classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
1117 <taskdef name="reload" classname="org.apache.catalina.ant.ReloadTask"
1118 classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
1119 <taskdef name="resources" classname="org.apache.catalina.ant.ResourcesTask"
1120 classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
1121 <taskdef name="roles" classname="org.apache.catalina.ant.RolesTask"
1122 classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
1123 <taskdef name="start" classname="org.apache.catalina.ant.StartTask"
1124 classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
1125 <taskdef name="stop" classname="org.apache.catalina.ant.StopTask"
1126 classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
1127 <taskdef name="undeploy" classname="org.apache.catalina.ant.UndeployTask"
1128 classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
1129 </target>
1130
1131
1132 <!-- ======================= ant Targets ============================ -->
1133 <target name="prepare-ant" depends="init">
1134 <if>
1135 <bool>
1136 <not><available file="${packages.home}/ant/.flagfile"/></not>
1137 </bool>
1138
1139 <get src="http://www.greenstone.org/gs3files/apache-ant-1.7.0-bin.zip"
1140 dest="${packages.home}/apache-ant-1.7.0-bin.zip"
1141 usetimestamp="true"/>
1142 <unzip src="${packages.home}/apache-ant-1.7.0-bin.zip"
1143 dest="${packages.home}"/>
1144 <move todir="${packages.home}/ant">
1145 <fileset dir="${packages.home}/apache-ant-1.7.0"/>
1146 </move>
1147 <echo file="${packages.home}/ant/.flagfile">
1148 the timestamp of this file is the time that ant was extracted from the zip files.
1149 it is used to figure out whether the files need to be refreshed or not in `ant prepare-ant`
1150 </echo>
1151
1152 <else>
1153 <echo>Ant has been prepared, will not prepare</echo>
1154 <echo>Delete ${packages.home}/ant/.flagfile to force refresh</echo>
1155 </else>
1156
1157 </if>
1158 </target>
1159
1160 <!-- ======================= Axis Targets ============================ -->
1161
1162 <target name="prepare-axis" depends="init">
1163
1164 <if>
1165 <bool>
1166 <not><available file="${packages.home}/axis/.flagfile"/></not>
1167 </bool>
1168
1169 <get src="http://www.greenstone.org/gs3files/${axis.zip.version}"
1170 dest="${packages.home}/${axis.zip.version}"
1171 usetimestamp="true"/>
1172 <unzip src="${packages.home}/${axis.zip.version}"
1173 dest="${packages.home}"/>
1174 <move todir="${packages.home}/axis">
1175 <fileset dir="${packages.home}/${axis.dir.version}"/>
1176 </move>
1177 <!-- install axis into greenstone web app -->
1178 <copy todir="${web.lib}">
1179 <fileset dir="${packages.home}/axis/webapps/axis/WEB-INF/lib">
1180 <include name="*.jar"/>
1181 </fileset>
1182 </copy>
1183 <copy todir="${web.home}">
1184 <fileset dir="${packages.home}/axis/webapps/axis/">
1185 <include name="*.jsp"/>
1186 <include name="*.jws"/>
1187 </fileset>
1188 </copy>
1189 <copy tofile="${web.home}/axis.html" file="${packages.home}/axis/webapps/axis/index.html"/>
1190 <copy todir="${web.classes}">
1191 <fileset dir="${packages.home}/axis/webapps/axis/WEB-INF/classes">
1192 <include name="*.properties"/>
1193 </fileset>
1194 </copy>
1195 <echo file="${packages.home}/axis/.flagfile">
1196 the timestamp of this file is the time that axis was extracted from the zip files.
1197 it is used to figure out whether the files need to be refreshed or not in `ant prepare-axis`
1198 </echo>
1199
1200 <else>
1201 <echo>Axis has been prepared, will not prepare</echo>
1202 <echo>Delete ${packages.home}/axis/.flagfile to force refresh</echo>
1203 </else>
1204
1205 </if>
1206 </target>
1207
1208 <target name="soap-deploy-site" depends="init,get-sitename,get-siteuri,get-webservices,create-deployment-files,deploy-site"
1209 description="Deploy a SOAP web service for a local Greenstone site. Tomcat must be running for this to work."/>
1210
1211 <target name="deploy-site">
1212 <java classname="org.apache.axis.client.AdminClient">
1213 <classpath refid="compile.classpath"/>
1214 <arg value="-l"/>
1215 <arg value="http://${tomcat.server}:${tomcat.port}${app.path}/servlet/AxisServlet"/>
1216 <arg file="${basedir}/resources/soap/deploy.wsdd"/>
1217 </java>
1218 <delete file="${basedir}/resources/soap/deploy.wsdd"/> <!--clean up, no longer used-->
1219 </target>
1220
1221 <target name="soap-undeploy-site" depends="get-undeploy-service-name"
1222 description="Undeploy a SOAP web service for a local Greenstone site. Tomcat must be running for this to work.">
1223 <filter token="servicesname" value="${axis.undeploy.servicename}"/>
1224 <copy file="${basedir}/resources/soap/undeploy-site.wsdd.template"
1225 tofile="${basedir}/resources/soap/undeploy.wsdd"
1226 filtering="true"
1227 overwrite="true"/>
1228 <java classname="org.apache.axis.client.AdminClient">
1229 <classpath refid="compile.classpath"/>
1230 <arg value="-l"/>
1231 <arg value="http://${tomcat.server}:${tomcat.port}${app.path}/servlet/AxisServlet"/>
1232 <arg file="${basedir}/resources/soap/undeploy.wsdd"/>
1233 </java>
1234 <delete file="${basedir}/resources/soap/undeploy.wsdd"/> <!--clean up, no longer used-->
1235 </target>
1236
1237 <!-- this target used to deploy the default web service SOAPServer (base.webservice.name) on the localsite server
1238 with the default servicename of localsite-->
1239 <target name="deploy-localsite" depends="init"
1240 description="Deploy the SOAP server for localsite. Will start and stop Tomcat.">
1241 <antcall target="start-tomcat"/>
1242 <echo>Deploying ${base.webservice.name} web services for localsite under service name: localsite</echo>
1243 <antcall target="create-deployment-files">
1244 <param name="axis.sitename" value="localsite"/>
1245 <param name="axis.servicesname" value="${base.webservice.name}"/>
1246 <param name="axis.siteuri" value="localsite"/>
1247 </antcall>
1248 <antcall target="deploy-site">
1249 <param name="axis.sitename" value="localsite"/>
1250 <param name="axis.servicesname" value="${base.webservice.name}"/>
1251 <param name="axis.siteuri" value="localsite"/>
1252 </antcall>
1253 <echo>The Greenstone server has been started up. If you do not want it running, please type: ant stop.</echo>
1254 </target>
1255
1256 <target name="get-sitename" unless="axis.sitename">
1257 <input addproperty="axis.sitename" defaultvalue="localsite">What site do you want to deploy services for?
1258Press Enter for default:localsite</input>
1259 </target>
1260
1261 <target name="get-undeploy-service-name" unless="axis.undeploy.servicename">
1262 <input addproperty="axis.undeploy.servicename" defaultvalue="localsite">Please enter the full name of the service you wish to undeploy.
1263To find out which web services you've got deployed, point your browser to http://HOST:PORT/greenstone3/services
1264Or press Enter for undeploying the default:localsite /&gt;</input>
1265 <echo>Name of service to undeploy: ${axis.undeploy.servicename}</echo>
1266 </target>
1267
1268 <target name="get-webservices" unless="axis.servicesname">
1269 <input addproperty="axis.servicesname" defaultvalue="${base.webservice.name}">Which set of web services do you want to deploy?
1270Choose from: ${web.services.list}
1271Or press Enter for default:${base.webservice.name} /&gt;</input>
1272 <echo>${axis.servicesname}</echo>
1273 </target>
1274
1275 <target name="get-siteuri" depends="get-sitename,get-webservices" unless="axis.siteuri">
1276 <input addproperty="axis.siteuri" defaultvalue="${axis.servicesname}${axis.sitename}">What name do you want the service to have? (Press Enter for default:${axis.servicesname}${axis.sitename})</input>
1277 <echo>Site: ${axis.sitename}, services: ${axis.servicesname}, servicesname: ${axis.siteuri}</echo>
1278 </target>
1279
1280 <target name="set-soapmethod" description="Determines whether the service in the wsdd should have the style attribute set to message or the provider attribute set to java:RPC" if="axis.servicesname">
1281 <condition property="soap.method" value="provider='java:MSG' style='message' use='literal'">
1282 <equals arg1="${axis.servicesname}" arg2="${base.webservice.name}"/>
1283 </condition>
1284
1285 <!--everything else defaults to java:RPC at present-->
1286 <condition property="soap.method" value="provider='java:RPC'">
1287 <not>
1288 <equals arg1="${axis.servicesname}" arg2="${base.webservice.name}"/>
1289 </not>
1290 </condition>
1291 </target>
1292
1293 <target name="create-deployment-files" depends="set-soapmethod" if="axis.sitename">
1294 <filter token="sitename" value="${axis.sitename}"/>
1295 <filter token="siteuri" value="${axis.siteuri}"/>
1296 <filter token="servicesname" value="${axis.servicesname}"/>
1297 <filter token="soapmethod" value="${soap.method}"/>
1298 <copy file="${basedir}/resources/soap/site.wsdd.template"
1299 tofile="${basedir}/resources/soap/deploy.wsdd"
1300 filtering="true"
1301 overwrite="true"/>
1302 <!-- create the java files and compile them -->
1303 <copy file="${basedir}/resources/java/${axis.servicesname}.java.in"
1304 tofile="${src.gsdl3.home}/${axis.servicesname}${axis.sitename}.java"
1305 filtering="true"
1306 overwrite="true"/>
1307 <mkdir dir="${build.home}"/>
1308 <javac srcdir="${src.home}"
1309 destdir="${build.home}"
1310 debug="${compile.debug}"
1311 deprecation="${compile.deprecation}"
1312 optimize="${compile.optimize}">
1313 <classpath refid="compile.classpath"/>
1314 <include name="org/greenstone/gsdl3/${axis.servicesname}${axis.sitename}.java" />
1315 </javac>
1316 <mkdir dir="${web.classes}/org/greenstone/gsdl3"/>
1317 <copy file="${build.home}/org/greenstone/gsdl3/${axis.servicesname}${axis.sitename}.class"
1318 tofile="${web.classes}/org/greenstone/gsdl3/${axis.servicesname}${axis.sitename}.class"
1319 overwrite="true" />
1320 </target>
1321
1322
1323 <!-- ====================== Core targets ============================== -->
1324 <!-- core targets refer to the core gsdl3 java src -->
1325
1326 <target name="prepare-core"/>
1327
1328 <target name="configure-core"/>
1329
1330 <target name="update-core" depends="init,svnupdate-core,clean-core,compile-core"
1331 description="Update only the Greenstone core" />
1332
1333 <target name="svnupdate-core" unless="nosvn.mode">
1334 <exec executable="svn">
1335 <arg value="update"/>
1336 <arg value="${basedir}"/>
1337 <arg value="-r"/><arg value="${branch.revision}"/>
1338 </exec>
1339 </target>
1340
1341 <target name="clean-core"
1342 description="Clean only the Greenstone core">
1343 <!-- should this delete the gsdl3.jar from web/WEB-INF?? -->
1344 <delete dir="${build.home}"/>
1345 </target>
1346
1347 <target name="compile-core" depends="init"
1348 description="Compile only the Greenstone core">
1349 <mkdir dir="${build.home}"/>
1350
1351 <if><bool><isset property="with.jni"/></bool>
1352 <javac srcdir="${src.home}"
1353 destdir="${build.home}"
1354 debug="${compile.debug}"
1355 deprecation="${compile.deprecation}"
1356 optimize="${compile.optimize}">
1357 <classpath>
1358 <path refid="compile.classpath"/>
1359 </classpath>
1360 </javac>
1361 <else>
1362 <property name="gsprefix" value=""/>
1363 <javac srcdir="${src.home}"
1364 destdir="${build.home}"
1365 debug="${compile.debug}"
1366 deprecation="${compile.deprecation}"
1367 optimize="${compile.optimize}">
1368 <classpath>
1369 <path refid="compile.classpath"/>
1370 </classpath>
1371 <exclude name="org/greenstone/gsdl3/service/GS2MGPPRetrieve.java"/>
1372 <exclude name="org/greenstone/gsdl3/service/GS2MGPPSearch.java"/>
1373 <exclude name="org/greenstone/gsdl3/service/GS2MGSearch.java"/>
1374 <exclude name="org/greenstone/gsdl3/service/GS2MGRetrieve.java"/>
1375 <exclude name="org/greenstone/gsdl3/service/GoogleNgramMGPPSearch.java"/>
1376 <exclude name="org/greenstone/gsdl3/service/PhindPhraseBrowse.java"/>
1377 <exclude name="org/greenstone/gsdl3/util/GDBMWrapper.java"/>
1378 </javac>
1379 </else>
1380 </if>
1381 <jar destfile="${build.home}/gsdl3.jar">
1382 <fileset dir="${build.home}">
1383 <include name="org/greenstone/gsdl3/**"/>
1384 <include name="org/flax/**"/>
1385 <exclude name="**/Test.class"/>
1386 </fileset>
1387 <manifest>
1388 <attribute name="Built-By" value="${user.name}" />
1389 </manifest>
1390 </jar>
1391 <copy file="${build.home}/gsdl3.jar" todir="${web.lib}"/>
1392
1393 <jar destfile="${build.home}/gutil.jar">
1394 <fileset dir="${build.home}">
1395 <include name="org/greenstone/util/**"/>
1396 </fileset>
1397 <manifest>
1398 <attribute name="Built-By" value="${user.name}" />
1399 </manifest>
1400 </jar>
1401 <copy file="${build.home}/gutil.jar" todir="${web.lib}"/>
1402
1403 <!-- copy the localsite server in case we need it -->
1404 <copy file="${build.home}/org/greenstone/gsdl3/${base.webservice.name}localsite.class" tofile="${web.classes}/org/greenstone/gsdl3/${base.webservice.name}localsite.class" />
1405
1406 <!-- Greenstone Administrator Interface -->
1407 <jar destfile="${build.home}/GAI.jar">
1408 <fileset dir="${build.home}">
1409 <include name="org/greenstone/admin/**"/>
1410 </fileset>
1411 <manifest>
1412 <attribute name="Built-By" value="${user.name}" />
1413 </manifest>
1414 </jar>
1415 <copy file="${build.home}/GAI.jar" todir="${web.lib}"/>
1416 <copy file="${build.home}/GAI.jar" todir="${admin.dir}"/>
1417 <jar destfile="${build.home}/phind.jar">
1418 <fileset dir="${build.home}">
1419 <include name="org/greenstone/applet/phind/**"/>
1420 </fileset>
1421 <manifest>
1422 <attribute name="Built-By" value="${user.name}" />
1423 </manifest>
1424 </jar>
1425 <mkdir dir="${web.applet}"/>
1426 <copy file="${build.home}/phind.jar" todir="${web.applet}"/>
1427 <!-- phind also needs xercesImpl.jar and xml-apis.jar to be in web/applet -->
1428 <if>
1429 <bool><istrue value="${tomcat.islocal}"/></bool>
1430 <copy file="${web.lib}/xercesImpl.jar" todir="${web.applet}"/>
1431 <copy file="${web.lib}/xml-apis.jar" todir="${web.applet}"/>
1432 </if>
1433
1434
1435 <!-- skip anttasks for now
1436 <jar destfile="${build.home}/anttasks.jar">
1437 <fileset dir="${build.home}">
1438 <include name="org/greenstone/anttasks/**"/>
1439 </fileset>
1440 <manifest>
1441 <attribute name="Built-By" value="${user.name}" />
1442 </manifest>
1443 </jar>
1444 <copy file="${build.home}/anttasks.jar" todir="${basedir}/lib/java"/>-->
1445 <jar destfile="${build.home}/gsdl3test.jar">
1446 <fileset dir="${build.home}">
1447 <include name="org/greenstone/gsdl3/**/*Test.class"/>
1448 <include name="org/greenstone/testing/**"/>
1449 </fileset>
1450 <manifest>
1451 <attribute name="Built-By" value="${user.name}" />
1452 </manifest>
1453 </jar>
1454 <jar destfile="${build.home}/server.jar">
1455 <fileset dir="${build.home}">
1456 <include name="org/greenstone/server/**"/>
1457 <include name="org/greenstone/util/**"/>
1458 </fileset>
1459 <fileset file="${basedir}/resources/java/server.properties"/>
1460 <manifest>
1461 <attribute name="Built-By" value="${user.name}"/>
1462 </manifest>
1463 </jar>
1464 <copy file="${build.home}/server.jar" todir="${basedir}"/>
1465 </target>
1466
1467 <!-- ================== Packages targets ================================ -->
1468 <!-- these targets refer to the greenstone source packages - these need
1469 updating less often, so are in separate targets to the core -->
1470 <target name="prepare-packages" depends="init"/>
1471
1472 <target name="update-packages" depends="init,svnupdate-packages,configure-packages,clean-packages,compile-packages"
1473 description="Update only the source packages"/>
1474
1475 <target name="svnupdate-packages" unless="nosvn.mode">
1476 <exec executable="svn">
1477 <arg value="update"/>
1478 <arg value="${src.packages.home}"/>
1479 <arg value="-r"/><arg value="${branch.revision}"/>
1480 </exec>
1481 </target>
1482
1483
1484 <target name="configure-packages" depends="init,configure-javagdbm"
1485 description="Configure only the packages."/>
1486
1487 <target name="configure-javagdbm" if="with.jni">
1488 <echo>
1489 Configuring JavaGDBM
1490 </echo>
1491
1492 <exec executable="${javagdbm.home}/configure" os="${os.unix}" dir="${javagdbm.home}" failonerror="true">
1493 <arg value="--prefix=${basedir}"/>
1494 <arg value="--libdir=${lib.jni}"/>
1495 <arg value="--with-gdbm=${gdbm.home}"/>
1496 </exec>
1497 </target>
1498
1499 <target name="clean-packages" depends="init,clean-javagdbm" description="Clean only the packages"/>
1500
1501 <target name="clean-javagdbm" depends="init">
1502 <exec executable="make" os="${os.unix}"
1503 dir="${javagdbm.home}" failonerror="true">
1504 <arg value="clean"/>
1505 </exec>
1506 </target>
1507
1508 <target name="distclean-packages" depends="init,distclean-javagdbm" description="Distclean only the packages"/>
1509
1510 <target name="distclean-javagdbm" depends="init">
1511 <exec executable="make" os="${os.unix}"
1512 dir="${javagdbm.home}" failonerror="true">
1513 <arg value="distclean"/>
1514 </exec>
1515 </target>
1516
1517 <target name="compile-packages" description="Compile only the source packages">
1518 <!-- javagdbm -->
1519 <antcall target="compile-javagdbm"/>
1520 <!-- Search4j -->
1521 <antcall target="compile-search4j"/>
1522 </target>
1523
1524 <target name="compile-javagdbm" description="Compile JavaGDBM" if="with.jni">
1525
1526 <!-- unix: -->
1527 <echo>compile javagdbm</echo>
1528 <exec executable="make" os="${os.unix}" dir="${javagdbm.home}" failonerror="true"/>
1529 <exec executable="make" os="${os.unix}" dir="${javagdbm.home}" failonerror="true">
1530 <arg value="install"/>
1531 </exec>
1532
1533 <!-- windows: Calling without the "compile" argument first will run winMake.bat with
1534 "all" which will then perform both the compile AND link targets in jni/win32.mak
1535 (thereby also generating gdbmjava.dll). Then we run the same command with
1536 the "install" argument to copy the gdbmjava.dll into the correct location. -->
1537 <echo>Windows: compile javagdbm</echo>
1538 <exec executable="${javagdbm.home}/winMake.bat" os="${os.windows}" dir="${javagdbm.home}" failonerror="true">
1539 <env key="GSDL3SRCHOME" path="${basedir}"/>
1540 </exec>
1541 <exec executable="${javagdbm.home}/winMake.bat" os="${os.windows}" dir="${javagdbm.home}" failonerror="true">
1542 <env key="GSDL3SRCHOME" path="${basedir}"/>
1543 <arg value="install"/>
1544 </exec>
1545
1546 <!-- install the jar file -->
1547 <echo>Install the javagdbm jar file ${javagdbm.home}/javagdbm.jar ${lib.jni}</echo>
1548 <copy file="${javagdbm.home}/javagdbm.jar" todir="${lib.jni}"/>
1549 </target>
1550
1551 <target name="compile-search4j">
1552
1553 <!-- windows -->
1554 <if><bool><istrue value="${current.os.iswindows}"/></bool>
1555 <exec executable="nmake" dir="${src.packages.home}/search4j" failonerror="true">
1556 <arg value="/f"/>
1557 <arg value="win32.mak"/>
1558 <arg value='BINDIR="${basedir}\bin"'/>
1559 </exec>
1560 <exec executable="nmake" dir="${src.packages.home}/search4j" failonerror="true">
1561 <arg value="/f"/>
1562 <arg value="win32.mak"/>
1563 <arg value="install"/>
1564 <arg value='BINDIR="${basedir}\bin"'/>
1565 </exec>
1566
1567 <!-- unix -->
1568 <else><if><bool><istrue value="${current.os.isunix}"/></bool>
1569 <exec executable="${src.packages.home}/search4j/configure" dir="${src.packages.home}/search4j" failonerror="true">
1570 <arg value="--bindir=${basedir}/bin"/>
1571 <arg value="${static.arg}"/>
1572 </exec>
1573 <exec executable="make" dir="${src.packages.home}/search4j" failonerror="true"/>
1574 <exec executable="make" dir="${src.packages.home}/search4j" failonerror="true">
1575 <arg value="install"/>
1576 </exec>
1577
1578 <!-- else warn -->
1579 <else>
1580 <fail>this target does not support the current os</fail>
1581
1582 </else></if></else></if>
1583
1584 </target>
1585
1586 <target name="install-auxiliary-jar-files" depends="init">
1587
1588 <if>
1589 <bool><available file="${mg.home}/mg.jar"/></bool>
1590 <copy file="${mg.home}/mg.jar" todir="${lib.jni}"/>
1591 </if>
1592
1593 <if>
1594 <bool><available file="${mgpp.home}/mgpp.jar"/></bool>
1595 <copy file="${mgpp.home}/mgpp.jar" todir="${lib.jni}"/>
1596 </if>
1597
1598 <copy file="${lucene.home}/LuceneWrapper3.jar" todir="${web.lib}"/>
1599 </target>
1600
1601 <target name="install-jni-files" depends="init" if="with.jni">
1602 <antcall target="install-jni-files-linux"/>
1603 <antcall target="install-jni-files-windows"/>
1604 <antcall target="install-jni-files-macos"/>
1605 </target>
1606
1607 <target name="install-jni-files-linux" depends="init" if="current.os.isunixnotmac">
1608 <copy file="${mg.home}/jni/libmgretrievejni.so" todir="${lib.jni}"/>
1609 <copy file="${mg.home}/jni/libmgsearchjni.so" todir="${lib.jni}"/>
1610 <copy file="${mg.home}/jni/libmgpassjni.so" todir="${lib.jni}"/>
1611 <copy file="${mgpp.home}/jni/libmgppretrievejni.so" todir="${lib.jni}"/>
1612 <copy file="${mgpp.home}/jni/libmgppsearchjni.so" todir="${lib.jni}"/>
1613 <copy file="${mgpp.home}/jni/libmgpppassjni.so" todir="${lib.jni}"/>
1614 </target>
1615 <target name="install-jni-files-windows" depends="init" if="current.os.iswindows">
1616 <copy file="${mg.home}/jni/mgretrievejni.dll" todir="${lib.jni}"/>
1617 <copy file="${mg.home}/jni/mgsearchjni.dll" todir="${lib.jni}"/>
1618 <copy file="${mg.home}/jni/mgpassjni.dll" todir="${lib.jni}"/>
1619 <copy file="${mgpp.home}/jni/mgppretrievejni.dll" todir="${lib.jni}"/>
1620 <copy file="${mgpp.home}/jni/mgppsearchjni.dll" todir="${lib.jni}"/>
1621 <copy file="${mgpp.home}/jni/mgpppassjni.dll" todir="${lib.jni}"/>
1622 </target>
1623 <target name="install-jni-files-macos" depends="init" if="current.os.ismac">
1624 <copy file="${mg.home}/jni/libmgretrievejni.jnilib" todir="${lib.jni}"/>
1625 <copy file="${mg.home}/jni/libmgsearchjni.jnilib" todir="${lib.jni}"/>
1626 <copy file="${mg.home}/jni/libmgpassjni.jnilib" todir="${lib.jni}"/>
1627 <copy file="${mgpp.home}/jni/libmgppretrievejni.jnilib" todir="${lib.jni}"/>
1628 <copy file="${mgpp.home}/jni/libmgppsearchjni.jnilib" todir="${lib.jni}"/>
1629 <copy file="${mgpp.home}/jni/libmgpppassjni.jnilib" todir="${lib.jni}"/>
1630 </target>
1631
1632 <!-- ========common-src targets =================================-->
1633 <!-- these are used to get common-src (for indexers, gdbm, sqlite etc) when
1634 collection building is not enabled -->
1635
1636 <target name="update-common-src" depends="init" if="collection.building.disabled">
1637 </target>
1638
1639 <target name="svnupdate-common-src" depends="init" if="collection.building.disabled" unless="nosvn.mode">
1640 <exec executable="svn">
1641 <arg value="update"/>
1642 <arg value="${common.src.home}"/>
1643 <arg value="-r"/><arg value="${branch.revision}"/>
1644 </exec>
1645 </target>
1646
1647 <target name="prepare-common-src" depends="init" if="collection.building.disabled" unless="common.src.present">
1648 <antcall target="checkout-common-src"/>
1649 <antcall target="unzip-windows-packages"/>
1650 </target>
1651
1652 <target name="checkout-common-src" depends="init" if="collection.building.disabled" unless="nosvn.mode">
1653 <echo>checking out common-src</echo>
1654 <exec executable="svn">
1655 <arg value="checkout"/>
1656 <arg value="${svn.root}/main/${branch.path}/greenstone2/common-src"/>
1657 <arg value="common-src"/>
1658 <arg value="-r"/><arg value="${branch.revision}"/>
1659 </exec>
1660 </target>
1661
1662 <target name="configure-common-src" depends="init">
1663 <exec executable="${common.src.home}/configure" os="${os.unix}"
1664 dir="${common.src.home}" failonerror="true">
1665 <arg value="--prefix=${gs2build.home}"/> <!-- what value to use?? -->
1666 <arg value="--bindir=${gs2build.home}/bin/${os.bin.dir}"/> <!-- what value to use?? -->
1667 <arg line="${gs2.opt.args}"/>
1668 <arg line="${static.arg}"/>
1669 <arg line="${allargs}"/>
1670 </exec>
1671 </target>
1672
1673 <target name="clean-common-src" depends="init">
1674 <!-- unix: -->
1675 <exec executable="make" os="${os.unix}" dir="${common.src.home}" failonerror="true">
1676 <arg value="clean"/>
1677 </exec>
1678 <!-- windows: -->
1679 <exec executable="nmake" dir="${common.src.home}" os="${os.windows}" failonerror="true">
1680 <arg value="/f"/>
1681 <arg value="win32.mak"/>
1682 <arg value="clean"/>
1683 <arg value="GSDLHOME=${gs2build.home}"/>
1684 </exec>
1685 </target>
1686 <target name="distclean-common-src" depends="init">
1687 <!-- unix: -->
1688 <exec executable="make" os="${os.unix}" dir="${common.src.home}" failonerror="true">
1689 <arg value="distclean"/>
1690 </exec>
1691 <!-- windows: distclean = clean + remove configure products (remove makefiles). But on Windows there is no removing makefiles, so we just call clean -->
1692 <exec executable="nmake" dir="${common.src.home}" os="${os.windows}" failonerror="true">
1693 <arg value="/f"/>
1694 <arg value="win32.mak"/>
1695 <arg value="clean"/>
1696 <arg value="GSDLHOME=${gs2build.home}"/>
1697 </exec>
1698 </target>
1699 <target name="compile-common-src" depends="init">
1700 <!-- unix: -->
1701 <exec executable="make" os="${os.unix}" dir="${common.src.home}" failonerror="true">
1702 <arg value="${gs2.compile.target}"/>
1703 </exec>
1704 <!-- windows: -->
1705 <exec executable="nmake" dir="${common.src.home}" os="${os.windows}" failonerror="true">
1706 <arg value="/f"/>
1707 <arg value="win32.mak"/>
1708 <arg value="GSDLHOME=${gs2build.home}"/>
1709 <arg value="ENABLE_JNI=${gs2.windows.enablejni}"/>
1710 <arg value="ENABLE_MG=${gs2.windows.enablemg}"/>
1711 <arg value="ENABLE_MGPP=${gs2.windows.enablemgpp}"/>
1712 <arg value="USE_GDBM=${gs2.windows.usegdbm}"/>
1713 <arg value="USE_SQLITE=${gs2.windows.usesqlite}"/>
1714 </exec>
1715 </target>
1716
1717 <!-- ======= collection-building targets ===========================-->
1718
1719 <target name="update-collection-building" if="collection.building.enabled"
1720 depends="init,svnupdate-collection-building,gs2build-edit-setup-bat,configure-common-src,clean-common-src,compile-common-src,configure-collection-building,clean-collection-building,compile-collection-building"
1721 description="Update (SVN update, configure, compile etc) only the collection building components"/>
1722
1723 <target name="svnupdate-collection-building" if="collection.building.enabled" depends="init,svnupdate-gs2build,svnupdate-gli" unless="nosvn.mode"
1724 description="SVN update the collection building components">
1725 </target>
1726
1727 <target name="prepare-collection-building" depends="init,prepare-gs2build,prepare-gli" if="collection.building.enabled">
1728 </target>
1729
1730 <target name="configure-collection-building" depends="init,configure-build-src" if="collection.building.enabled"
1731 description="Configure the collection building components">
1732 </target>
1733
1734 <target name="clean-collection-building" depends="init,clean-gli,clean-build-src"
1735 description="Clean only the collection building components"
1736 if="collection.building.enabled"/>
1737
1738 <target name="distclean-collection-building" depends="init,clean-build-src,distclean-build-src"
1739 description="Distclean only the collection building components"
1740 if="collection.building.enabled"/>
1741
1742 <target name="compile-collection-building" depends="init,compile-build-src,compile-gli" if="collection.building.enabled"
1743 description="Compile only the collection building components">
1744 <!-- make install for common-src -->
1745 <!-- unix: -->
1746 <exec executable="make" os="${os.unix}" dir="${common.src.home}" failonerror="true">
1747 <arg value="${gs2.install.target}"/>
1748 </exec>
1749
1750 <!-- windows: -->
1751 <exec executable="nmake" dir="${common.src.home}" os="${os.windows}" failonerror="true">
1752 <arg value="/f"/>
1753 <arg value="win32.mak"/>
1754 <arg value="install"/>
1755 <arg value="GSDLHOME=${gs2build.home}"/>
1756 <arg value="ENABLE_JNI=${gs2.windows.enablejni}"/>
1757 <arg value="ENABLE_MG=${gs2.windows.enablemg}"/>
1758 <arg value="ENABLE_MGPP=${gs2.windows.enablemgpp}"/>
1759 <arg value="USE_GDBM=${gs2.windows.usegdbm}"/>
1760 <arg value="USE_SQLITE=${gs2.windows.usesqlite}"/>
1761 <!--
1762 <arg value="ENABLE_JNI=${gs2.windows.enablejni}"/>
1763 <arg value="USE_SQLITE=0"/>--> <!-- why is this not on by default? -->
1764 </exec>
1765
1766 <!-- install gs2build indexers for windows -->
1767 <if>
1768 <bool><istrue value="${current.os.iswindows}"/></bool>
1769 <copy todir="${gs2build.home}/bin/windows">
1770 <fileset dir="${gs2build.home}/common-src/indexers/bin">
1771 <include name="*.*"/>
1772 </fileset>
1773 </copy>
1774 </if>
1775
1776 <!-- LuceneWrapper jar file not installed by default -->
1777 <mkdir dir="${gs2build.home}/bin/java"/>
1778 <copy file="${lucene.home}/LuceneWrapper3.jar" todir="${gs2build.home}/bin/java"/>
1779
1780 </target>
1781
1782 <!-- ============== gli targets ================================= -->
1783 <target name="svnupdate-gli" if="collection.building.enabled" depends="init" unless="nosvn.mode">
1784
1785 <exec executable="svn">
1786 <arg value="update"/>
1787 <arg value="${gli.home}"/>
1788 <arg value="-r"/><arg value="${branch.revision}"/>
1789 </exec>
1790
1791 <exec executable="svn" dir="web/WEB-INF/cgi">
1792 <arg value="export"/>
1793 <arg value="-r"/><arg value="${branch.revision}"/>
1794 <arg value="${svn.root}/main/${branch.path}/greenstone2/common-src/cgi-bin/gliserver.pl"/>
1795 </exec>
1796 <exec executable="svn" dir="web/WEB-INF/cgi">
1797 <arg value="export"/>
1798 <arg value="-r"/><arg value="${branch.revision}"/>
1799 <arg value="${svn.root}/main/${branch.path}/greenstone2/common-src/cgi-bin/gsdlCGI.pm"/>
1800 </exec>
1801
1802 </target>
1803
1804 <target name="prepare-gli" depends="init" if="collection.building.enabled" unless="gli.present">
1805 <!-- checkout -->
1806 <if><bool><and><not><istrue value="${nosvn.mode}"/></not><isset property="with.gli.and.gems"/></and></bool>
1807
1808 <exec executable="svn">
1809 <arg value="checkout"/>
1810 <arg value="${svn.root}/main/${branch.path}/gli"/>
1811 <arg value="-r"/><arg value="${branch.revision}"/>
1812 </exec>
1813
1814 <exec executable="svn" dir="web/WEB-INF/cgi">
1815 <arg value="export"/>
1816 <arg value="-r"/><arg value="${branch.revision}"/>
1817 <arg value="${svn.root}/main/${branch.path}/greenstone2/cgi-bin/gliserver.pl"/>
1818 </exec>
1819 <exec executable="svn" dir="web/WEB-INF/cgi">
1820 <arg value="export"/>
1821 <arg value="-r"/><arg value="${branch.revision}"/>
1822 <arg value="${svn.root}/main/${branch.path}/greenstone2/cgi-bin/gsdlCGI.pm"/>
1823 </exec>
1824
1825 </if>
1826 </target>
1827
1828 <target name="clean-gli" depends="init" if="collection.building.enabled">
1829 <!-- gli -->
1830 <property name="gli.home" value="${basedir}/gli"/>
1831 <!-- linux -->
1832 <exec executable="clean.sh" os="${os.unix}" dir="${gli.home}"
1833 resolveExecutable="true" failonerror="true"/>
1834 <!-- windows -->
1835 <exec executable="clean.bat" os="${os.windows}" dir="${gli.home}"
1836 resolveExecutable="true" failonerror="true"/>
1837 </target>
1838
1839 <target name="compile-gli" depends="init" if="collection.building.enabled">
1840 <if><bool><isset property="with.gli.and.gems"/></bool>
1841 <!-- gli -->
1842 <property name="gli.home" value="${basedir}/gli"/>
1843
1844 <!-- linux -->
1845 <exec executable="makegli.sh" os="${os.unix}" dir="${gli.home}" resolveExecutable="true" failonerror="true"/>
1846 <!--remote gli-->
1847 <exec executable="makejar.sh" os="${os.unix}" dir="${gli.home}"
1848 resolveExecutable="true" failonerror="true"/>
1849 <!-- windows -->
1850 <exec executable="makegli.bat" os="${os.windows}" dir="${gli.home}" resolveExecutable="true" failonerror="true"/>
1851 <!--remote gli-->
1852 <exec executable="makejar.bat" os="${os.windows}" dir="${gli.home}"
1853 resolveExecutable="true" failonerror="true"/>
1854 <copy file="${gli.home}/GLIServer.jar" todir="${gs2build.home}/bin/java" />
1855 </if>
1856 </target>
1857
1858 <target name="gli" description="Run the Greenstone Librarian Interface" depends="init" if="collection.building.enabled">
1859 <exec executable="${basedir}/gli/gli.sh" os="${os.linux},${os.solaris}" dir="${basedir}/gli" spawn="true">
1860 <env key="gsdl3path" path="${basedir}"/>
1861 <env key="gsdlpath" path="${gs2build.home}"/>
1862 </exec>
1863 <exec executable="${basedir}/gli/gli.sh" os="${os.mac}" dir="${basedir}/gli" spawn="true">
1864 <env key="gsdl3path" path="${basedir}"/>
1865 <env key="gsdlpath" path="${gs2build.home}"/>
1866 <env key="DYLD_LIBRARY_PATH" path="${env.DYLD_LIBRARY_PATH}:${gdbm.home}/lib"/>
1867 </exec>
1868 <exec executable="${basedir}/gli/gli.bat" os="${os.windows}" dir="${basedir}/gli" spawn="true">
1869 <env key="GSDL3PATH" path="${basedir}"/>
1870 <env key="GSDLPATH" path="${gs2build.home}"/>
1871 </exec>
1872 <echo>Running GLI from Ant means that you don't get to see any of the terminal output. If you have problems with GLI and want to see the output, please run the script gli.sh/bat from the greenstone3/gli directory.
1873 </echo>
1874 </target>
1875
1876 <!-- ================ gs2build targets =========================== -->
1877
1878 <target name="svnupdate-gs2build" if="collection.building.enabled" depends="init" unless="nosvn.mode">
1879 <echo>svn updating gs2build</echo>
1880 <exec executable="svn">
1881 <arg value="update"/>
1882 <arg value="${gs2build.home}"/>
1883 <arg value="-r"/><arg value="${branch.revision}"/>
1884 </exec>
1885 </target>
1886
1887 <target name="prepare-gs2build" depends="init" if="collection.building.enabled" unless="gs2build.present">
1888 <antcall target="checkout-gs2build"/>
1889 <antcall target="unzip-windows-packages"/>
1890 <antcall target="checkout-winbin"/>
1891 <antcall target="get-windows-binaries"/>
1892 <antcall target="delete-winbin"/>
1893 </target>
1894
1895 <target name="checkout-gs2build" depends="init" if="collection.building.enabled" unless="nosvn.mode">
1896 <echo>checking out gs2build</echo>
1897 <exec executable="svn">
1898 <arg value="checkout"/>
1899 <arg value="${svn.root}/main/${branch.path}/gs2build"/>
1900 <arg value="-r"/><arg value="${branch.revision}"/>
1901 </exec>
1902
1903
1904 </target>
1905
1906 <target name="checkout-winbin" depends="init" if="current.os.iswindows"
1907 unless="nosvn.mode">
1908
1909 <exec executable="svn">
1910 <arg value="checkout"/>
1911 <arg value="${svn.root}/main/${branch.path}/binaries/windows"/>
1912 <arg value="-r"/><arg value="${branch.revision}"/>
1913 <arg value="winbin"/>
1914 </exec>
1915
1916 </target>
1917
1918 <target name="update-winbin" depends="init" if="current.os.iswindows" unless="nosvn.mode">
1919 <exec executable="svn">
1920 <arg value="update"/>
1921 <arg value="winbin"/>
1922 <arg value="-r"/><arg value="${branch.revision}"/>
1923 </exec>
1924
1925 </target>
1926
1927 <target name="get-windows-binaries" depends="init" if="collection.building.enabled.windows">
1928 <move todir="${gs2build.home}/bin/windows" failonerror="false">
1929 <fileset dir="${basedir}/winbin/bin"/>
1930 </move>
1931 </target>
1932
1933 <target name="delete-winbin" depends="init" if="collection.building.enabled.windows">
1934 <delete dir="${basedir}/winbin"/>
1935 </target>
1936
1937 <target name="unzip-windows-packages" depends="init" if="current.os.iswindows">
1938 <unzip src="${common.src.home}/packages/windows/crypt/crypt.zip"
1939 dest="${common.src.home}/packages/windows/crypt"/>
1940 <untar compression="gzip"
1941 src="${common.src.home}/packages/sqlite/${sqlite.targz.version}"
1942 dest="${common.src.home}/packages/sqlite"/>
1943 <unzip src="${common.src.home}/indexers/packages/windows/iconv/iconv.zip"
1944 dest="${common.src.home}/indexers/packages/windows/iconv"/>
1945 </target>
1946
1947 <target name="gs2build-edit-setup-bat" if="collection.building.enabled.windows">
1948 <!-- we want a windows path in the setup.bat file -->
1949 <pathconvert targetos="windows" property="gs2build.home.windows">
1950 <path path="${gs2build.home}"/>
1951 </pathconvert>
1952 <move file="${gs2build.home}/setup.bat" tofile="${gs2build.home}/setup-tmp.bat">
1953 <filterset>
1954 <filter token="gsdlhome" value="${gs2build.home.windows}"/>
1955 </filterset>
1956 </move>
1957 <move file="${gs2build.home}/setup-tmp.bat" tofile="${gs2build.home}/setup.bat" />
1958 </target>
1959
1960
1961 <target name="clean-build-src" depends="init" if="collection.building.enabled">
1962 <!-- unix: -->
1963 <exec executable="make" os="${os.unix}" dir="${build.src.home}" failonerror="true">
1964 <arg value="clean"/>
1965 </exec>
1966 <!-- windows: -->
1967 <exec executable="nmake" dir="${build.src.home}" os="${os.windows}" failonerror="true">
1968 <arg value="/f"/>
1969 <arg value="win32.mak"/>
1970 <arg value="clean"/>
1971 <arg value="GSDLHOME=${gs2build.home}"/>
1972 </exec>
1973 </target>
1974
1975
1976 <target name="distclean-build-src" depends="init,clean-build-src" if="collection.building.enabled">
1977 <!-- unix: -->
1978 <exec executable="make" os="${os.unix}" dir="${build.src.home}" failonerror="true">
1979 <arg value="distclean"/>
1980 </exec>
1981 <!-- windows: distclean = clean + remove configure products (remove makefiles). But on Windows there is no removing makefiles, so we just call clean -->
1982 <exec executable="nmake" dir="${build.src.home}" os="${os.windows}" failonerror="true">
1983 <arg value="/f"/>
1984 <arg value="win32.mak"/>
1985 <arg value="clean"/>
1986 <arg value="GSDLHOME=${gs2build.home}"/>
1987 </exec>
1988 </target>
1989
1990 <target name="configure-build-src" depends="init" if="collection.building.enabled"
1991 description="Configure the build-src component">
1992 <exec executable="${build.src.home}/configure" os="${os.unix}"
1993 dir="${build.src.home}" failonerror="true">
1994 <arg value="--prefix=${gs2build.home}"/>
1995 <arg line="${gs2.opt.args} ${static.arg} ${allargs}"/>
1996 </exec>
1997 </target>
1998
1999 <!-- common-src is done separately and needs to be compiled first -->
2000 <target name="compile-build-src" depends="init" if="collection.building.enabled">
2001
2002 <exec executable="make" dir="${build.src.home}" os="${os.unix}" failonerror="true">
2003 <arg line="${ldlpath.arg}"/>
2004 </exec>
2005
2006 <exec executable="make" dir="${build.src.home}" os="${os.unix}" failonerror="true">
2007 <arg value="install"/>
2008 </exec>
2009
2010 <!-- run the setup script -->
2011 <!-- <exec executable="${compile.windows.c++.setup}" os="${os.windows}" failonerror="true"/>-->
2012 <!--Above does not work: even though vcvars.bat executes, the env changes it makes don't get saved. Need user to run vcvars.bat first before calling ant-->
2013 <exec executable="nmake" dir="${build.src.home}" os="${os.windows}" failonerror="true">
2014 <arg value="/f"/>
2015 <arg value="win32.mak"/>
2016 <arg value="GSDLHOME=${gs2build.home}"/>
2017 </exec>
2018 <exec executable="nmake" dir="${build.src.home}" os="${os.windows}" failonerror="true">
2019 <arg value="/f"/>
2020 <arg value="win32.mak"/>
2021 <arg value="install"/>
2022 <arg value="GSDLHOME=${gs2build.home}"/>
2023 </exec>
2024 </target>
2025
2026
2027 <!-- ======================== TESTING Targets ========================= -->
2028
2029 <target name="test" description="Run the (incomplete) JUnit test suite "
2030 depends="init">
2031 <mkdir dir="${basedir}/test"/>
2032 <junit printsummary="withOutAndErr"
2033 errorproperty="test.failed"
2034 failureproperty="test.failed"
2035 fork="${junit.fork}">
2036 <formatter type="plain"/>
2037 <classpath>
2038 <pathelement location="${build.home}/gsdl3test.jar"/>
2039 <path refid="compile.classpath"/>
2040 </classpath>
2041 <test name="${testcase}" if="testcase"/>
2042 <batchtest todir="${basedir}/test" unless="testcase">
2043 <fileset dir="${build.home}" includes="**/*Test.class" />
2044 </batchtest>
2045 </junit>
2046 <echo>
2047 *********************************************
2048 Test output can be found in directory 'test'
2049 *********************************************
2050 </echo>
2051 </target>
2052
2053 <!-- ======================== FLAX Targets ========================= -->
2054 <target name="prepare-flax" description="check out flax source code from another repository" if="install.flax">
2055 <echo>checking out flax ...</echo>
2056 <mkdir dir="${basedir}/src/java/org/flax"/>
2057 <mkdir dir="${basedir}/src/java/org/greenstone/gsdl3/flax"/>
2058 <mkdir dir="${basedir}/src/java/org/greenstone/gsdl3/action/flax"/>
2059 <mkdir dir="${web.home}/WEB-INF/classes/flax"/>
2060 <mkdir dir="${web.home}/interfaces/flax"/>
2061 <mkdir dir="${web.home}/sites/flax"/>
2062 <mkdir dir="${basedir}/flax-resources"/>
2063 <mkdir dir="${basedir}/flax-lib"/>
2064 <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/src/java/org/flax"/>
2065 <arg value="src/java/org/flax"/></exec>
2066 <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/src/java/org/greenstone/gsdl3/flax"/>
2067 <arg value="src/java/org/greenstone/gsdl3/flax"/></exec>
2068 <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/src/java/org/greenstone/gsdl3/action/flax"/>
2069 <arg value="src/java/org/greenstone/gsdl3/action/flax"/></exec>
2070 <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/web/WEB-INF/classes/flax"/>
2071 <arg value="${web.home}/WEB-INF/classes/flax"/></exec>
2072 <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/web/interfaces/flax"/>
2073 <arg value="${web.home}/interfaces/flax"/></exec>
2074 <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/web/sites/flax"/>
2075 <arg value="${web.home}/sites/flax"/></exec>
2076 <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/flax-resources"/>
2077 <arg value="flax-resources"/></exec>
2078 <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/lib"/>
2079 <arg value="flax-lib"/></exec>
2080 <antcall target="flax-copy-files" />
2081 </target>
2082
2083 <target name="flax-copy-files" description="copy some flax files into the appropriate greenstone3 directories">
2084 <echo>copying flax files ...</echo>
2085 <copy file="${web.home}/WEB-INF/classes/flax/web.xml" todir="${web.home}/WEB-INF" overwrite="true" />
2086 <!-- A configuration file containing web service binding information for the axis engine -->
2087 <copy file="${web.home}/WEB-INF/classes/flax/server-config.wsdd" todir="${web.home}/WEB-INF" overwrite="true" />
2088 <!-- A static web service wsdl file which is queried by soap client. The reason this file is used (instead of the dynamically generated version) is in case any redirects are used in the Apache configuration (e.g., flax.nzdl.org:80 redirects to harakeke:8080) -->
2089 <copy file="${basedir}/flax-resources/FlaxWebService.wsdl" tofile="${web.home}/FlaxWebService.wsdl" overwrite="true"/>
2090 <copy todir="${web.home}/WEB-INF/lib">
2091 <fileset dir="${basedir}/flax-lib">
2092 <include name="*.jar"/>
2093 </fileset>
2094 </copy>
2095 </target>
2096 <target name="configure-flax-wsdl" description="Configure flax webservice with tomcat server/port">
2097 <copy file="${basedir}/flax-resources/FlaxWebService.wsdl" tofile="${web.home}/FlaxWebService.wsdl" overwrite="true"/>
2098 <rsr file="${web.home}/FlaxWebService.wsdl" pattern="@flaxpublicserver@:@flaxpublicport@" replacement="${tomcat.server}:${tomcat.port}"/>
2099 <echo>FLAX server for Moodle module is configured to: http://${tomcat.server}:${tomcat.port}.</echo>
2100 </target>
2101
2102 <target name="update-flax" description="update flax from repository">
2103 <echo>updating flax ...</echo>
2104 <exec executable="svn"><arg value="update"/>
2105 <arg value="src/java/org/flax"/></exec>
2106 <exec executable="svn"><arg value="update"/>
2107 <arg value="src/java/org/greenstone/gsdl3/action/flax"/></exec>
2108 <exec executable="svn"><arg value="update"/>
2109 <arg value="src/java/org/greenstone/gsdl3/flax"/></exec>
2110 <exec executable="svn"><arg value="update"/>
2111 <arg value="${web.home}/WEB-INF/classes/flax"/></exec>
2112 <exec executable="svn"><arg value="update"/>
2113 <arg value="${web.home}/interfaces/flax"/></exec>
2114 <exec executable="svn"><arg value="update"/>
2115 <arg value="${web.home}/web/sites/flax"/></exec>
2116 <exec executable="svn"><arg value="update"/>
2117 <arg value="flax-resources"/></exec>
2118 <exec executable="svn"><arg value="update"/>
2119 <arg value="flax-lib"/></exec>
2120 <antcall target="compile-core" />
2121 </target>
2122
2123
2124 <target name="compile-javadocs">
2125 <javadoc packagenames="org.greenstone.*"
2126 sourcepath="src/java"
2127 defaultexcludes="yes"
2128 destdir="docs/javadoc"
2129 author="true"
2130 version="true"
2131 use="true"
2132 windowtitle="Greenstone3 API">
2133 <doctitle><![CDATA[<h1>Greenstone3 API</h1>]]></doctitle>
2134 </javadoc>
2135 </target>
2136
2137<!-- ========== Some distribution targets ======================== -->
2138 <target name="remove-source">
2139 <if><bool><isset property="with.gli.and.gems"/></bool>
2140 <delete includeEmptyDirs="true">
2141 <fileset dir="." defaultexcludes="false">
2142 <patternset refid="greenstone3.source.component"/>
2143 </fileset>
2144 </delete>
2145
2146 <else>
2147 <delete includeEmptyDirs="true">
2148 <fileset dir="." defaultexcludes="false">
2149 <patternset refid="greenstone3.source.no.gli.component"/>
2150 </fileset>
2151 </delete>
2152 </else>
2153 </if>
2154 </target>
2155
2156 <target name="dist-tidy"
2157 description="'tidies-up' a greenstone3 installation for distribution.">
2158
2159 <!-- delete unneeded things -->
2160 <delete dir="${packages.home}/axis"/>
2161 <delete><fileset dir="${packages.home}" includes="*.zip"/></delete>
2162 <delete file="README-SVN.txt"/>
2163 <delete file="build.properties.in"/>
2164
2165 <!-- delete source files -->
2166 <antcall target="remove-source"/>
2167
2168 <!-- create empty directories -->
2169 <mkdir dir="${web.home}/applet"/>
2170 <mkdir dir="${web.home}/logs"/>
2171
2172 <!-- os specific tidy-ups -->
2173 <!-- linux, mac -->
2174 <if><bool><istrue value="${current.os.isunix}"/></bool>
2175 <delete><fileset dir="." includes="*.bat"/></delete>
2176 <if><bool><isset property="with.gli.and.gems"/></bool>
2177 <delete><fileset dir="gli" includes="*.bat"/></delete>
2178 </if>
2179 <delete><fileset dir="gs2build" includes="*.bat"/></delete>
2180 <delete><fileset dir="bin/script" includes="*.bat"/></delete>
2181 <delete file="${basedir}/gs2build/win32cfg.h"/>
2182 <delete file="${basedir}/gs2build/win32.mak"/>
2183 <delete dir="${basedir}/winutil"/>
2184 <delete failonerror="false"><fileset dir="${lib.jni}" includes="*.dll"/></delete>
2185
2186 <!-- windows -->
2187 <else><if><bool><istrue value="${current.os.iswindows}"/></bool>
2188 <delete><fileset dir="." includes="*.sh,*.bash,*.csh"/></delete>
2189 <if><bool><isset property="with.gli.and.gems"/></bool>
2190 <delete><fileset dir="gli" includes="*.sh,*.bash,*.csh"/></delete>
2191 </if>
2192 <delete><fileset dir="gs2build" includes="*.sh,*.bash,*.csh"/></delete>
2193 <delete><fileset dir="bin/script" includes="*.sh,*.bash,*.csh"/></delete>
2194 </if></else></if>
2195
2196 </target>
2197
2198 <!-- fix up executable permissions for binary release -->
2199 <target name="fix-execute-permissions">
2200 <echo>Setting binaries to executable</echo>
2201 <chmod perm="775">
2202 <fileset dir="."><patternset refid="greenstone3.executables"/></fileset>
2203 </chmod>
2204 </target>
2205
2206 <!-- fix up executable permissions for source code release -->
2207 <target name="fix-execute-permissions-source">
2208 <chmod perm="775">
2209 <fileset dir="."><patternset refid="greenstone3.source.executables"/></fileset>
2210 </chmod>
2211 </target>
2212
2213
2214 <!-- ============= tweaks for making compilation static ========== -->
2215 <target name="tweak-makefiles" depends="init" if="compile.static">
2216 <antcall target="rtftohtml-add-static" />
2217 </target>
2218
2219 <target name="rtftohtml-add-static" depends="init" if="collection.building.enabled">
2220 <rsr file="${gs2build.home}/build-src/packages/rtftohtml/rtftohtml_src/Makefile" pattern="-o rtftohtml(.{2})EXEEXT(.{1})" replacement="-o rtftohtml$1EXEEXT$2 -static" />
2221 </target>
2222
2223</project>
2224
Note: See TracBrowser for help on using the repository browser.