root/main/trunk/greenstone3/build.xml @ 30013

Revision 30013, 141.2 KB (checked in by ak19, 5 years ago)

ant restart calls both stop and start, which tries to stop and start both the derby and the tomcat, all in a single ant command. Derby stop and start both do a check to see if the derbyserver is running and set a property. Tomcat stop and start similarly both do a check to see if the tomcat server is running and set a property. Since a property is set obly once during a single ant invocation, two properties are needed to store the stop check and the start check for tomcat respectively, and two properties are needed for the stop check and start check for the derbyserver respectively.

Line 
1<?xml version="1.0"?>
2<!-- ======================================================================
3     March 2005                                                   
4
5     Greenstone3 build and install script
6                 
7     kjdon                                                               
8     ====================================================================== -->
9<project name="greenstone3" default="usage" basedir=".">
10  <echo>os.name: ${os.name}</echo>
11
12  <!-- ============ classpath =================== -->
13  <path id="project.classpath">
14    <fileset dir="lib/java">
15      <include name="**/*.jar"/>
16    </fileset>
17  </path>
18 
19  <!-- ============ self defined tasks =================== -->
20  <taskdef name="mysetproxy" classname="org.greenstone.anttasks.MySetProxy" classpathref="project.classpath"/>
21  <taskdef name="getuserandpassword" classname="org.greenstone.anttasks.MyGetUserAndPassword" classpathref="project.classpath"/>
22  <taskdef name="rsr" classname="org.greenstone.anttasks.RegexSearchReplace" classpathref="project.classpath"/>
23  <!--<taskdef name="svn" classname="org.tigris.subversion.svnant.SvnTask" classpathref="project.classpath"/>-->
24  <taskdef name="if" classname="ise.antelope.tasks.IfTask" classpathref="project.classpath"/>
25  <taskdef name="for" classname="net.sf.antcontrib.logic.ForTask" classpathref="project.classpath"/>
26  <taskdef name="stringutil" classname="ise.antelope.tasks.StringUtilTask" classpathref="project.classpath"/>
27
28 
29  <!-- ===================== Property Definitions =========================== -->
30 
31  <!--
32
33  Each of the following properties are used in the build script.
34  Values for these properties are set by the first place they are
35  defined, from the following list:
36
37  * Definitions on the "ant" command line (ant -Dfoo=bar compile).
38
39  * Definitions from a "build.properties" file in the top level
40  source directory of this application.
41
42  * Definitions from a "build.properties" file in the user's
43  home directory.
44
45  * Default definitions in this build.xml file.
46
47  You will note below that property values can be composed based on the
48  contents of previously defined properties.  This is a powerful technique
49  that helps you minimize the number of changes required when your development
50  environment is modified.  Note that property composition is allowed within
51  "build.properties" files as well as in the "build.xml" script.
52
53  -->
54
55  <property name="os.linux" value="Linux"/>
56  <property name="os.mac" value="Mac OS X"/>
57  <property name="os.solaris" value="SunOS"/>
58  <property name="os.unix" value="${os.linux},${os.mac},${os.solaris}"/>
59  <property name="os.windows" value="Windows 95,Windows 98,Windows 2000,Windows 2003,Windows XP,Windows NT,Windows ME,Windows Vista,Windows 7,Windows Server 2008,Windows Server 2008 R2"/> <!-- check this!!!-->
60
61  <!-- this is true for linux and macs -->
62  <condition property="current.os.isunix">
63    <os family="unix"/>
64  </condition>
65 
66  <condition property="current.os.isunixnotmac">
67    <and>
68      <os family="unix"/>
69      <not>
70    <os family="mac"/>
71      </not>
72    </and>
73  </condition>
74 
75  <condition property="current.os.ismac">
76    <os family="mac"/>
77  </condition>
78 
79  <condition property="current.os.iswindows">
80    <os family="windows"/>
81  </condition>
82
83  <!-- create build.properties if it has not been created yet -->
84  <if>
85    <bool><not><available file="build.properties"/></not></bool>
86    <copy file="build.properties.in" tofile="build.properties"/>
87  </if>
88
89  <!-- create the packages dir if it has not been created yet -->
90  <mkdir dir="packages"/>
91 
92  <!--the first three properties have to be put on the top to be used by build.properties-->
93  <property name="gs2build.home" value="${basedir}${file.separator}gs2build"/>
94  <property name="src.packages.home" value="${basedir}/src/packages"/>
95  <property name="flax.svn.root" value="http://svn.greenstone.org/flax"/>
96
97  <property name="solr-ext.home" value="${basedir}/ext/solr"/>
98
99  <property file="build.properties"/>
100  <if><bool><available file="${user.home}/build.properties"/></bool>
101    <property file="${user.home}/build.properties"/>
102  </if>
103
104  <!-- now we've read in properties, apply defaults -->
105  <property name="disable.collection.building" value="false"/>
106
107  <!-- get properties from the environment -->
108  <property environment="env"/>
109
110  <!-- get the filesets defining components and executables -->
111  <import file="resources/xml/components.xml"/>
112  <import file="resources/xml/executables.xml"/>
113   
114  <!-- version properties for external packages -->
115  <!-- for Java versions < 1.4, we print out the message that Java is too old.
116    For Java 1.4, we use Tomcat 5.5, for Java5 and higher, we use Tomcat 7.0-->
117  <condition property="tomcat.version" value="apache-tomcat-5.5.25" else="apache-tomcat-7.0.57">
118    <equals arg1="1.4" arg2="${ant.java.version}"/>
119  </condition>
120  <condition property="tomcat.version.major" value="5" else="7">
121    <equals arg1="1.4" arg2="${ant.java.version}"/>
122  </condition>
123  <condition property="privileged.attribute" value="privileged='true'" else="">
124    <equals arg1="7" arg2="${tomcat.version.major}"/>
125  </condition>
126
127  <!-- external access to the GS3 pages or not
128       https://tomcat.apache.org/tomcat-7.0-doc/config/valve.html -->
129  <condition property="allowed.IPs"
130         value=".*"
131         else="(127\.0\.0\.1|::1|0:0:0:0:0:0:0:1)">
132    <matches pattern="^(1|true|yes)$" string="${server.external.access}"/>
133  </condition>
134
135  <property name="axis.zip.version" value="axis-bin-1_4.zip"/>
136  <property name="axis.dir.version" value="axis-1_4"/>
137  <property name="sqlite.targz.version" value="sqlite-autoconf-3070602.tar.gz"/>
138
139  <property name="build.home" value="${basedir}/build"/>
140  <property name="src.home" value="${basedir}/src/java"/>
141
142  <if><bool><istrue value="${gsdl3home.isreadonly}"/></bool>
143    <property name="readonly-packages.home" value="${basedir}/packages"/>
144    <property name="packages.home" value="${gsdl3.writablehome}/packages"/>
145  <else>
146    <property name="packages.home" value="${basedir}/packages"/>
147  </else>
148  </if>
149
150  <!-- this may be set in build.properties, e.g. if you move the web dir to
151       tomcats webapps directory -->
152  <property name="web.home" value="${basedir}/web"/>
153  <property name="web.writablehome" value="${gsdl3.writablehome}"/>
154
155  <!-- jar files needed by applets go here -->
156  <property name="web.applet" value="${web.home}/applet"/>
157
158  <!-- jar files needed by the servlet (and extra ones) go here -->
159  <property name="web.lib" value="${web.home}/WEB-INF/lib"/>
160  <property name="web.writablelib" value="${web.writablehome}/WEB-INF/lib"/>
161  <!-- other files needed by the servlet go here -->
162  <property name="web.classes" value="${web.home}/WEB-INF/classes"/>
163  <property name="web.writableclasses" value="${web.writablehome}/WEB-INF/classes"/>
164
165  <if>
166    <bool><istrue value="${gsdl3home.isreadonly}"/></bool>
167    <echo>Greenstone3 home directory is read-only</echo>
168    <echo>  => Writable area is: ${gsdl3.writablehome}</echo>
169
170    <condition property="gsdl3.writablehome.already-exists">
171      <available file="${gsdl3.writablehome}" type="dir"/>
172    </condition>
173
174    <if>
175      <bool><not><istrue value="${gsdl3.writablehome.already-exists}"/></not></bool>
176
177      <!-- set up writable area -->
178      <echo>No previous Greenstone home writable area detected</echo>
179      <echo>  => Setting up area</echo>
180      <mkdir dir="${gsdl3.writablehome}"/>
181      <mkdir dir="${gsdl3.writablehome}/packages"/>
182      <mkdir dir="${gsdl3.writablehome}/logs"/>
183      <mkdir dir="${gsdl3.writablehome}/ext/solr"/>
184
185      <chmod perm="a+rwx" dir="${gsdl3.writablehome}"/>
186      <chmod perm="a+rwx" dir="${gsdl3.writablehome}/packages"/>
187      <chmod perm="a+rwx" dir="${gsdl3.writablehome}/logs"/>
188      <chmod perm="a+rwx" dir="${gsdl3.writablehome}/ext/solr"/>
189
190      <!-- copy over packages tomcat folder -->
191
192      <if>
193    <bool><istrue value="${current.os.iswindows}"/></bool>
194    <copy todir="${gsdl3.writablehome}/packages/tomcat"
195          preservelastmodified="true"
196          failonerror="true" > 
197      <fileset dir="${readonly-packages.home}/tomcat" includes="**"/> 
198    </copy>
199     
200    <else>
201      <!-- else assume Unix -->
202      <!-- Can't go through the OS-independant <copy> task as it fails to preserve exec permissions -->
203      <echo>Copying to ${gsdl3.writablehome}/packages/tomcat</echo>
204      <exec executable="cp" output="/dev/null" spawn="false">
205            <arg value="-r"/>
206            <arg value="${readonly-packages.home}/tomcat"/>
207            <arg value="${gsdl3.writablehome}/packages/."/>
208      </exec>
209     
210    </else>
211      </if>
212     
213      <echo>  => Copying Greenstone's web/WEB-INF to writable area</echo>
214      <copy todir="${gsdl3.writablehome}/WEB-INF"
215        preservelastmodified="true"
216        failonerror="true" > 
217    <fileset dir="${web.home}/WEB-INF" includes="**"/> 
218      </copy>
219
220      <copy todir="${gsdl3.writablehome}"
221        preservelastmodified="true"
222        failonerror="true" > 
223    <fileset dir="${web.home}" includes="index.html"/> 
224      </copy>
225
226    </if>
227  </if>
228
229
230  <!--- flax: the WordNet home -->
231  <property name="wn.home" value="${web.home}/WEB-INF/classes/flax/WordNet"/>
232
233  <!-- jni libraries and java wrappers go here -->
234  <property name="lib.jni" value="${basedir}/lib/jni"/>
235
236  <!-- other jar files needed for installation (but not runtime) go here -->
237  <property name="lib.java" value="${basedir}/lib/java"/>
238 
239  <property name="javadocs" value="${basedir}/docs/javadoc"/>
240
241  <property name="app.name"      value="greenstone3"/>
242  <property name="app.path"      value="/${app.name}"/>
243
244   <property name="admin.dir"      value="${basedir}/admin"/>
245
246  <!-- defaults - set these on the command line or in build.properties or
247       they will take these default values-->
248  <property name="app.version" value="trunk"/>
249  <property name="branch.path" value="trunk"/>
250  <property name="branch.revision" value="HEAD"/>
251
252  <!--constants -->
253  <property name="svn.root" value="http://svn.greenstone.org"/>
254
255  <!-- catalina home is set to tomcat basedir if already installed, otherwise
256       use greenstone's tomcat -->
257  <condition property="catalina.home" value="${tomcat.installed.path}" else="${packages.home}/tomcat">
258    <and>
259      <isset property="tomcat.installed.path"/>
260      <not>
261    <equals arg1="" arg2="${tomcat.installed.path}"/>
262      </not>
263    </and>
264  </condition>
265 
266
267  <!-- is there a better way to do this?? what about solaris?? -->
268  <condition property="os.bin.dir" value="${cross.os}">
269      <istrue value="${compile.cross}"/>
270  </condition>
271  <condition property="os.bin.dir" value="windows">
272    <os family="windows"/>
273  </condition>
274  <condition property="os.bin.dir" value="darwin">
275    <os family="mac"/>
276  </condition>
277  <condition property="os.bin.dir" value="linux">
278    <and>
279      <os family="unix"/>
280      <not>
281    <os family="mac"/>
282      </not>
283    </and>
284  </condition>
285
286 
287  <condition property="collection.building.disabled">
288    <and>
289      <isset property="disable.collection.building"/>
290      <istrue value="${disable.collection.building}"/>
291    </and>
292  </condition>
293
294  <condition property="collection.building.enabled">
295    <not>
296      <istrue value="${disable.collection.building}"/>
297    </not>
298  </condition>
299 
300  <condition property="collection.building.enabled.windows">
301    <and>
302      <istrue value="${collection.building.enabled}"/>
303      <isset property="current.os.iswindows"/>
304    </and>
305  </condition>
306 
307  <condition property="collection.building.enabled.unix">
308    <and>
309      <istrue value="${collection.building.enabled}"/>
310      <isset property="current.os.isunix"/>
311    </and>
312  </condition>
313
314  <condition property="static.arg" value="LDFLAGS=-static" else=" ">
315    <isset property="compile.static"/>
316  </condition>
317
318  <!-- If building a release then we want to adjust environment variables so that the support library can be seen during compilation -->
319  <if><bool><isset property="use.gnomelib.ext"/></bool>
320    <property name="gnome-lib-dir" value="${basedir}/ext/gnome-lib-minimal/${os.bin.dir}"/>
321
322    <if><bool><isset property="env.CFLAGS"/></bool>
323        <property name="cflags.arg" value="CFLAGS=&quot;-I${gnome-lib-dir}/include ${env.CFLAGS}&quot;"/>
324    <else>
325        <property name="cflags.arg" value="CFLAGS=&quot;-I${gnome-lib-dir}/include&quot;"/>
326    </else>
327    </if>
328
329    <if><bool><isset property="env.CPPFLAGS"/></bool>
330        <property name="cppflags.arg" value="CPPFLAGS=&quot;-I${gnome-lib-dir}/include ${env.CPPFLAGS}&quot;"/>
331    <else>
332        <property name="cppflags.arg" value="CPPFLAGS=&quot;-I${gnome-lib-dir}/include&quot;"/>
333    </else>
334    </if>
335
336    <if><bool><isset property="env.CXXFLAGS"/></bool>
337        <property name="cxxflags.arg" value="CXXFLAGS=&quot;-I${gnome-lib-dir}/include ${env.CXXFLAGS}&quot;"/>
338    <else>
339            <property name="cxxflags.arg" value="CXXFLAGS=&quot;-I${gnome-lib-dir}/include&quot;"/>
340    </else>
341    </if>
342
343    <if><bool><isset property="env.LDFLAGS"/></bool>
344        <property name="ldflags.arg" value="LDFLAGS=&quot;-L${gnome-lib-dir}/lib ${env.LDFLAGS}&quot;"/>
345    <else>
346            <property name="ldflags.arg" value="LDFLAGS=&quot;-L${gnome-lib-dir}/lib&quot;"/>
347    </else>
348    </if>
349
350    <if><bool><isset property="env.PATH"/></bool>
351        <property name="path.arg" value="PATH=&quot;${gnome-lib-dir}/bin:${env.PATH}&quot;"/>
352    <else>
353            <property name="path.arg" value="PATH=&quot;${gnome-lib-dir}/bin&quot;"/>
354    </else>
355    </if>
356
357    <if><bool><isset property="env.PKG_CONFIG_PATH"/></bool>
358        <property name="pcpath.arg" value="PKG_CONFIG_PATH=&quot;${gnome-lib-dir}/lib/pkgconfig:${env.PKG_CONFIG_PATH}&quot;"/>
359    <else>
360            <property name="pcpath.arg" value="PKG_CONFIG_PATH=&quot;${gnome-lib-dir}/lib/pkgconfig&quot;"/>
361    </else>
362    </if>
363
364    <if><bool><equals arg1="${os.bin.dir}" arg2="darwin"/></bool>
365        <if><bool><isset property="env.DYLD_LIBRARY_PATH"/></bool>
366            <property name="ldlpath.arg" value="DYLD_LIBRARY_PATH=&quot;${gnome-lib-dir}/lib:${env.DYLD_LIBRARY_PATH}&quot;"/>
367        <else>
368            <property name="ldlpath.arg" value="DYLD_LIBRARY_PATH=&quot;${gnome-lib-dir}/lib&quot;"/>
369        </else>
370        </if>
371    <else>
372        <if><bool><isset property="env.LD_LIBRARY_PATH"/></bool>
373            <property name="ldlpath.arg" value="LD_LIBRARY_PATH=&quot;${gnome-lib-dir}/lib:${env.LD_LIBRARY_PATH}&quot;"/>
374        <else>
375            <property name="ldlpath.arg" value="LD_LIBRARY_PATH=&quot;${gnome-lib-dir}/lib&quot;"/>
376        </else>
377        </if>
378    </else>
379    </if>
380
381    <else>
382        <if><bool><isset property="env.CFLAGS"/></bool>
383            <property name="cflags.arg" value="CFLAGS=&quot;${env.CFLAGS}&quot;"/>
384            <else>
385            <property name="cflags.arg" value=" "/>
386        </else>
387        </if>
388
389        <if><bool><isset property="env.CPPFLAGS"/></bool>
390                <property name="cppflags.arg" value="CPPFLAGS=&quot;${env.CPPFLAGS}&quot;"/>
391            <else>
392            <property name="cppflags.arg" value=" "/>
393        </else>
394        </if>
395
396        <if><bool><isset property="env.CXXFLAGS"/></bool>
397            <property name="cxxflags.arg" value="CXXFLAGS=&quot;${env.CXXFLAGS}&quot;"/>
398        <else>
399            <property name="cxxflags.arg" value=" "/>
400        </else>
401        </if>
402
403        <if><bool><isset property="env.LDFLAGS"/></bool>
404            <property name="ldflags.arg" value="LDFLAGS=&quot;${env.LDFLAGS}&quot;"/>
405        <else>
406            <property name="ldflags.arg" value=" "/>
407        </else>
408        </if>
409
410        <if><bool><isset property="env.PATH"/></bool>
411            <property name="path.arg" value="PATH=&quot;${env.PATH}&quot;"/>
412        <else>
413            <property name="path.arg" value=" "/>
414        </else>
415        </if>
416
417        <if><bool><isset property="env.PKG_CONFIG_PATH"/></bool>
418            <property name="pcpath.arg" value="PKG_CONFIG_PATH=&quot;${env.PKG_CONFIG_PATH}&quot;"/>
419        <else>
420            <property name="pcpath.arg" value=" "/>
421        </else>
422        </if>
423
424        <if><bool><equals arg1="${os.bin.dir}" arg2="darwin"/></bool>
425            <if><bool><isset property="env.DYLD_LIBRARY_PATH"/></bool>
426                <property name="ldlpath.arg" value="DYLD_LIBRARY_PATH=&quot;${env.DYLD_LIBRARY_PATH}&quot;"/>
427            <else>
428                <property name="ldlpath.arg" value=" "/>
429            </else>
430            </if>
431        <else>
432            <if><bool><isset property="env.LD_LIBRARY_PATH"/></bool>
433                <property name="ldlpath.arg" value="LD_LIBRARY_PATH=&quot;${env.LD_LIBRARY_PATH}&quot;"/>
434            <else>
435                <property name="ldlpath.arg" value=" "/>
436            </else>
437            </if>
438        </else> 
439        </if>
440    </else>
441  </if>
442  <property name="allargs" value="${cflags.arg} ${cxxflags.arg} ${cppflags.arg} ${ldflags.arg} ${path.arg} ${ldlpath.arg} ${pcpath.arg}"/>
443
444  <condition property="opt.cross.build"
445         value="--build=${cross.build}" else=" ">
446    <isset property="cross.build"/>
447  </condition>
448
449
450  <condition property="cross.configure.args"
451         value="--host=${cross.host} ${opt.cross.build} CPP=${cross.host}-cpp CC=${cross.host}-gcc CXX=${cross.host}-g++ LD=${cross.host}-ld AR=${cross.host}-ar RANLIB=${cross.host}-ranlib STRIP=${cross.host}-strip ${cross.configure.extraargs} crossOS=${cross.os}" else=" ">
452    <istrue value="${compile.cross}"/>
453  </condition>
454
455  <!-- if we're told to work with gnome-lib, or if there's a gnome-lib-minimal that the user
456       has placed in gs2build/ext, then compile gs2build after sourcing gnome-lib environment -->
457  <condition property="opt.gnomelibext.arg"
458         value="--enable-gnome-lib-ext" else=" ">
459    <or>
460      <available file="${gs2build.home}/ext/gnome-lib-minimal" type="dir"/>
461      <istrue value="${use.gnomelib.ext}"/>
462      <istrue value="${checkout.gnomelib.ext}"/>
463    </or>
464   </condition>
465
466<!-- if you want to disable wvware, do so here: set the value (not else) field to contain minus-minus-disable-wvware -->
467  <condition property="gs2.opt.args" value="${opt.gnomelibext.arg} " else="--disable-mg --disable-mgpp --disable-accentfold --disable-gdbm --disable-sqlite">
468    <istrue value="${with.jni}"/>
469  </condition>
470  <condition property="gs2.compile.target" value="with-jni" else="without-jni">
471    <istrue value="${with.jni}"/>
472  </condition>
473  <condition property="gs2.install.target" value="install-with-jni" else="install-without-jni">
474    <istrue value="${with.jni}"/>
475  </condition>
476  <condition property="gs2.windows.enablejni" value="1" else="0">
477    <istrue value="${with.jni}"/>
478  </condition>
479  <condition property="gs2.windows.enablemg" value="1" else="0">
480    <istrue value="${with.jni}"/>
481  </condition>
482  <condition property="gs2.windows.enablemgpp" value="1" else="0">
483    <istrue value="${with.jni}"/>
484  </condition>
485  <!-- Should accent folding not also be set here ?? -->
486  <condition property="gs2.windows.usegdbm" value="1" else="0">
487    <istrue value="${with.jni}"/>
488  </condition>
489  <condition property="gs2.windows.usesqlite" value="1" else="0">
490    <istrue value="${with.jni}"/>
491  </condition>
492 
493  <!-- where is search4j tool -->
494  <condition property="search4j.exec" value="bin/search4j.exe" else="bin/search4j">
495    <isset property="current.os.iswindows"/>
496  </condition>
497
498 
499  <!-- ============= Base dirs for each package and component ============ -->
500  <property name="src.gsdl3.home" value="${src.home}/org/greenstone/gsdl3"/>
501  <property name="anttasks.home" value="${src.home}/org/greenstone/anttasks"/>
502  <property name="gli.home" value="${basedir}/gli"/>
503  <property name="javagdbm.home" value="${src.packages.home}/javagdbm"/>
504
505  <condition property="common.src.home" value="${basedir}/common-src" else="${gs2build.home}${file.separator}common-src">
506    <istrue value="${disable.collection.building}"/>
507  </condition>
508 
509  <property name="build.src.home" value="${gs2build.home}/build-src"/>
510  <property name="gdbm.home" value="${common.src.home}/packages/gdbm"/>
511  <property name="mg.home" value="${common.src.home}/indexers/mg"/>
512  <property name="mgpp.home" value="${common.src.home}/indexers/mgpp"/>
513  <property name="lucene.home" value="${common.src.home}/indexers/lucene-gs"/>
514
515  <!--  ==================== Compilation Control Options ==================== -->
516
517  <!--
518
519  These properties control option settings on the Javac compiler when it
520  is invoked using the <javac> task.
521
522  compile.debug        Should compilation include the debug option?
523
524  compile.deprecation  Should compilation include the deprecation option?
525
526  compile.optimize     Should compilation include the optimize option?
527
528  -->
529
530  <property name="compile.debug"       value="true"/>
531  <property name="compile.deprecation" value="true"/>
532  <property name="compile.optimize"    value="true"/>
533  <property name="compile.encoding"    value="UTF8"/>
534  <property name="compile.includeantruntime" value="false"/> <!-- to get rid of annoying 'ant' warning -->
535
536  <!--
537
538  Rather than relying on the CLASSPATH environment variable, Ant includes
539  features that makes it easy to dynamically construct the classpath you
540  need for each compilation.  The example below constructs the compile
541  classpath to include the servlet.jar file, as well as the other components
542  that Tomcat makes available to web applications automatically, plus anything
543  that you explicitly added.
544
545  -->
546 
547  <!-- All elements that Tomcat 5 exposes to applications -->
548  <path id="tomcat5">
549    <pathelement location="${catalina.home}/common/classes"/>
550    <fileset dir="${catalina.home}/common/endorsed">
551      <include name="*.jar"/>
552    </fileset>
553    <fileset dir="${catalina.home}/common/lib">
554      <include name="*.jar"/>
555    </fileset>
556    <!-- seems to be empty, but will leave in just in case some people make use of this to customise their install: -->
557    <pathelement location="${catalina.home}/shared/classes"/>
558    <fileset dir="${catalina.home}/shared/lib">
559      <include name="*.jar"/>
560    </fileset>
561  </path>
562 
563  <!-- All elements that Tomcat 7 exposes to applications -->
564  <path id="tomcat7">
565    <fileset dir="${catalina.home}/lib">
566      <include name="*.jar"/>
567    </fileset>
568  </path>
569 
570  <path id="compile.classpath">
571    <!-- Include all jar files and libraries in our jni lib directory -->
572    <pathelement location="${lib.jni}"/>
573    <fileset dir="${lib.jni}">
574      <include name="*.jar"/>
575    </fileset>
576    <!-- Include all jar files in our web lib directory -->
577    <pathelement location="${web.lib}"/>
578    <fileset dir="${web.lib}">
579      <include name="*.jar"/>
580    </fileset>
581   
582    <pathelement location="${lib.java}"/>
583    <fileset dir="${lib.java}">
584      <include name="*.jar"/>
585    </fileset>
586   
587    <!-- include the jar files from the source packages -->
588    <!-- mg and mgpp get installed into lib/jni but they may not be there yet
589    so we add them in by name -->
590    <!-- *** is there any way to make this optional, based on ${with.jni}? -->
591    <pathelement location="${lib.jni}/mg.jar"/>
592    <pathelement location="${lib.jni}/mgpp.jar"/>
593   
594    <!-- Include all elements that Tomcat exposes to applications -->
595    <path refid="tomcat${tomcat.version.major}"/>
596   
597  </path>
598
599  <path id="local.tomcat.classpath">
600    <!-- explicitly include the jni java wrappers in the classpath -->
601    <pathelement location="${lib.jni}"/>
602    <fileset dir="${lib.jni}">
603      <include name="*.jar"/>
604    </fileset>
605   
606    <pathelement location="${web.writablelib}"/>
607    <fileset dir="${web.writablelib}">
608      <include name="derbyclient.jar"/> <!--<include name="derby.jar"/>-->
609    </fileset>
610  </path>
611 
612  <path id="derby.server.classpath">
613    <pathelement location="${web.lib}/derbynet.jar"/>
614    <pathelement location="${web.lib}/derby.jar"/>
615  </path>
616
617
618  <path id="local.tomcat.path">
619    <pathelement location="${basedir}/bin/script"/>
620    <pathelement location="${basedir}/bin"/>
621    <pathelement location="${lib.jni}"/>
622    <pathelement path="${env.PATH}"/>
623    <pathelement path="${env.Path}"/>
624    <pathelement path="${wn.home}/bin"/>
625  </path>
626
627  <target name="test-setup">
628    <echo>ant java version=${ant.java.version}</echo>
629    <echo>is unix : ${current.os.isunix}</echo>
630    <echo>is mac : ${current.os.ismac}</echo>
631    <echo>is unixnotmac : ${current.os.isunixnotmac}</echo>
632    <echo>is windows : ${current.os.iswindows}</echo>
633    <echo>os.unix: ${os.unix}</echo>
634  </target>
635
636  <!-- Appends the current env to the file environment.txt. For debugging env vars used by the release-kit. -->
637  <target name="write-env" description="Writes out the environment that this build.xml is executed in to file environment.txt. For debugging.">
638    <echo message="*****************ENVIRONMENT OUTPUT:****************${line.separator}" file="environment.txt" append="true" />
639
640    <if><bool><istrue value="${current.os.iswindows}"/></bool>
641      <exec executable="set" dir="${basedir}" failonerror="false" output="environment.txt" append="true">     
642    <arg value="/c" />
643    <arg value="set" />
644      </exec>
645      <else>
646    <exec executable="env" dir="${basedir}" failonerror="false" output="environment.txt" append="true" />
647      </else>
648    </if>
649
650    <echo message="${line.separator}" file="environment.txt" append="true" />
651  </target>
652
653 
654  <!-- ==================== Primary and Global Targets ============================= -->
655
656  <target name="prepare" depends="accept-properties,init,copy-dot-in-files,prepare-core,prepare-packages,prepare-common-src,prepare-collection-building,prepare-tomcat,prepare-axis,prepare-web,prepare-collections, prepare-flax"
657    description="Use this when you first checkout the code: 'ant prepare install'. This will do some additional subversion checkouts and downloads, so you need to be online to run this.">
658
659    <!-- make sure .sh files are executable -->
660    <chmod dir="${basedir}" perm="ugo+rx"
661      includes="*.sh"/>
662    <chmod dir="${basedir}/bin/script" perm="ugo+rx"
663      includes="*.sh,*.pl"/>
664  </target>
665
666  <!-- install-common-src and install-collection-building are mutually exclusive and either one or the other will be done depending on whether collection building is enabled or not -->
667  <!--before configuring build-src, make sure that gnome-lib is compiled up-->
668  <target name="install" depends="init,compile-imagemagick,compile-gnome-lib,install-common-src,install-collection-building,install-runtime,install-solr-ext,setup-for-eclipse,get-isisgdl"
669    description="Install Greenstone 3. Use this when you first checkout the code: 'ant prepare new-install'."/>
670
671  <target name="install-common-src" depends="init"
672    description="Install (configure, compile, install) only the common-src package (shared code from Greenstone 2). " >
673    <antcall target="configure-common-src"/>
674    <antcall target="compile-common-src"/>
675    <antcall target="install-auxiliary-jar-files"/>
676    <antcall target="install-jni-files"/>
677  </target>
678
679  <target name="install-collection-building" depends="init" if="collection.building.enabled"
680    description="Install (configure, compile, install) the Greenstone 2 collection building package." >
681    <antcall target="configure-collection-building"/>
682    <antcall target="tweak-makefiles" />
683    <antcall target="compile-collection-building"/>
684  </target>
685   
686
687  <target name="install-runtime" depends="init,configure,configure-packages,configure-core,compile-web,compile-packages,compile-core,compile-classpath-jars"
688    description="Install (configure, compile, install) the runtime system. Needs either common-src or collection-building to have been installed first." />
689   
690  <target name="svnupdate" depends="init,svnupdate-packages,svnupdate-core,svnupdate-common-src,svnupdate-collection-building,svnupdate-web"
691    description="Do a `svn update` for all sources. Doesn't recompile the code. You need to be online to run this."/>
692 
693  <target name="configure" depends="init,configure-tomcat,configure-web"
694    description="Configure the installation (not the C++ code). Includes setting up config files. Should be re-run if you change the build.properties file, including if you change the port number."/>
695
696  <target name="clean" depends="init,clean-packages,clean-core,clean-common-src,clean-collection-building,clean-classpath-jars"
697    description="Remove all old compiled code. Includes runtime and collection-building if necessary"/>
698 
699  <target name="distclean" depends="init,distclean-packages,clean-core,distclean-common-src,distclean-collection-building,clean-classpath-jars"
700    description="Remove all compiled code and also any Makefiles etc generated during configure-c++. Includes runtime and collection-building as necessary"/>
701 
702  <target name="update" depends="init,svnupdate,clean,install"
703    description="Update (thru Subversion) all the source (including common-src or collection-building, and runtime), then clean, and re-install. To do this without any SVN updates, run it like 'ant -Dnosvn.mode=yes update'"/>
704
705
706  <target name="perl-for-building" depends="init">
707    <!-- uses perl.path if set in build.properties, otherwise try for
708         environment variable PERLPATH, and failing that assumes 'perl'
709         is on environment PATH -->
710    <!-- if, outside build.properties, we only set perl.path if we have gs2build/build-src (collection building), then we won't set perl.path in a (flax) binary, since it doesn't have build-src -->
711    <if><bool><available file="${gs2build.home}"/></bool>
712
713      <if><bool><not><isset property="perl.path"/></not></bool>
714
715        <if>
716          <bool>
717            <and>
718              <isset property="env.PERLPATH"/>
719              <not><equals arg1="${env.PERLPATH}" arg2=""/></not>
720            </and>
721          </bool>
722          <!-- set perlpath to env.PERLPATH.
723            This is the path to perl\bin that's found by findperl.bat when the server is launched
724            through GLI instead of the console.
725            For windows, this env.PERLPATH is the bin folder and needs a backslash at end, since it
726            will appear suffixed with "perl.exe" in the perl setting in packages\tomcat\config\web.xml.
727            This web.xml's path to perl is then used to find perl when running the perl scripts in the
728            cgi folder, so without a slash appended at this point it becomes "binperl" in web.xml, and
729            things will break when GLI launches the server on Windows and the online GS3 metadata editor
730            is used to save user-edited metadata. -->
731          <if><bool><istrue value="${current.os.iswindows}"/></bool>
732            <property name="perl.path" value="${env.PERLPATH}\"/>
733          <else>
734            <property name="perl.path" value="${env.PERLPATH}"/>
735          </else>   
736          </if>
737         
738          <else>
739            <echo>
740  Using PATH environment variable to locate Perl.
741            </echo>
742            <exec executable="which" os="${os.unix}" spawn="false" outputproperty="full.perl.path">
743              <arg value="perl" />
744            </exec>
745
746        <exec executable="${gs2build.home}/bin/windows/which" osfamily="windows" spawn="false" outputproperty="full.perl.path">
747              <arg value="perl" />
748            </exec>
749
750            <stringutil string="${full.perl.path}" property="partial.perl.path">
751                <replace regex="\/[^\/]*$" replacement="/" />
752            </stringutil>
753        <stringutil string="${partial.perl.path}" property="perl.path">
754                <replace regex="\\[^\\]*$" replacement="\\" />
755            </stringutil>
756            <if><bool><istrue value="${current.os.isunix}"/></bool>
757              <if><bool><not><equals arg1="${full.perl.path}" arg2="/usr/bin/perl"/></not></bool>
758                <echo>
759    Non-standard location of Perl found: ${full.perl.path}
760    Set the environment variable PERLPATH or the perl.path property in
761    build.properties to explicitly control the version of Perl used.
762                </echo>
763              </if>
764            </if>
765          </else>
766        </if>
767      </if>
768
769      <!-- full.perl.path is for pretty-printing only, e.g. used in target "start" -->
770      <if><bool><isset property="perl.path"/></bool>
771        <property name="full.perl.path" value="${perl.path}${file.separator}perl"/>
772        <else>
773          <property name="full.perl.path" value="perl (will use the enviroment variable PATH to find this executable)"/>
774        </else>
775      </if>
776
777      <!-- gs2build not available, perl.path -->
778      <else>
779    <property name="perl.path" value=""/>
780      </else>
781    </if>
782    <stringutil string="${perl.path}" property="escaped.perl.path">
783      <replace regex="\\" replacement="\\\\" />
784    </stringutil>
785  </target>
786
787  <target name="get-default-servlet-url">
788    <echo>http://${tomcat.server}:${tomcat.port}${app.path}${server.default.servlet}</echo>
789  </target>
790
791  <target name="check-derbyserver-running">
792    <condition property="derby.isrunning" value="true" else="false">
793      <!--<socket server="jdbc:derby://${derby.server}" port="${derby.server.port}"/>-->
794      <socket server="${derby.server}" port="${derby.server.port}"/><!-- like telnet machine port -->
795    </condition>
796    <echo>Derby is running: ${derby.isrunning}</echo>
797  </target>
798
799  <!-- Need a copy of the check-derby-running target with a distinct property, because ant restart runs
800       both stop and start, which stop and start derby respectively. Both  need check the derby socket.
801       Because each property can be set only once during an invocation with ant, ant restart will need
802       two check-derbyserver properties, one for each derby check. -->
803  <target name="check-derbyserver-started">
804    <condition property="derby.isstarted" value="true" else="false">
805      <socket server="${derby.server}" port="${derby.server.port}"/>
806    </condition>
807    <echo>Derby is running: ${derby.isstarted}</echo>
808  </target>
809
810
811  <!-- Unused -->
812  <target name="start-derby-java" depends="check-derbyserver-running">
813    <if><bool><not><istrue value="${derby.isrunning}"/></not></bool>
814      <echo>Launching derby on ${derby.server}:${derby.server.port}...</echo>
815      <java classname="org.apache.derby.drda.NetworkServerControl" fork="true" spawn="true" clonevm="true">     
816    <arg value="start"/>
817    <classpath refid="derby.server.classpath"/>
818      </java>
819      <else>
820    <echo>Derby server ALREADY RUNNING on ${derby.server}:${derby.server.port}</echo>
821      </else>
822    </if>
823  </target>
824 
825  <target name="start-derby" depends="check-derbyserver-started">
826    <if><bool><not><istrue value="${derby.isstarted}"/></not></bool>
827      <echo>About to launch derby on ${derby.server}:${derby.server.port}</echo>
828      <antcall target="force-start-derby"/>
829      <else>
830    <echo>Derby networked server ALREADY RUNNING on ${derby.server}:${derby.server.port}</echo>
831      </else>
832    </if>
833  </target>
834
835  <!-- Using derby 10.1.2.1
836       See db-derby-10.1.2.1-bin/docs/html/adminguide/index.html -->
837  <target name="force-start-derby">
838      <property name="derby.server.classpath.prop" refid="derby.server.classpath" />
839     
840      <exec executable="java" spawn="true"><!-- failonerror="true"-->
841    <env key="CLASSPATH" path="${derby.server.classpath.prop}"/>
842    <arg value="org.apache.derby.drda.NetworkServerControl"/>
843    <arg value="start"/>
844    <arg value="-p"/>
845    <arg value="${derby.server.port}"/>
846      </exec>
847
848  </target>
849
850  <target name="force-stop-derby">
851    <java classname="org.apache.derby.drda.NetworkServerControl">
852      <arg value="shutdown"/>
853      <classpath refid="derby.server.classpath"/>
854    </java>
855  </target>
856
857  <target name="stop-derby" description="Shutdown derby server only if running" depends="check-derbyserver-running"><!-- if="${derby.isrunning}" checks if true or false only from ant 1.8 on -->
858    <if><bool><istrue value="${derby.isrunning}"/></bool>
859      <!--<echo>Derby is |${derby.isrunning}| running</echo>-->
860      <antcall target="force-stop-derby"/>
861      <else>
862    <echo>Derby is not running</echo>
863      </else>
864    </if>
865  </target>
866
867  <target name="start" depends="init,configure-tomcat,configure-web,configure-solr-ext,start-derby,start-tomcat"
868    description="Startup the Tomcat server." >
869    <echo>${app.name} (${app.version}) server running using Apache Tomcat and Java</echo>
870    <echo>Tomcat: ${catalina.home}</echo>
871    <echo>Java  : ${java.home}</echo>
872    <if><bool><available file="${build.src.home}"/></bool>
873      <echo>Perl  : ${full.perl.path}</echo>
874    </if>
875    <if><bool><isset property="install.flax"/></bool>
876        <property name="url" value="http://${tomcat.server}:${tomcat.port}${app.path}/flax"/>
877    <else>
878        <property name="url" value="http://${tomcat.server}:${tomcat.port}${app.path}/"/>
879    </else>
880    </if>
881    <echo>URL   : ${url}</echo>
882    <!-- assuming that index.html is not needed here -->   
883
884    <!--Now write out the url with oaiserver suffix as the baseURL property in OAIConfig.xml-->
885    <available file="${basedir}/resources/oai/OAIConfig.xml" property="oaiconfig.present"/>
886    <antcall target="init-oaiconfig">
887      <param name="url" value="${url}"/>
888    </antcall>
889  </target>
890
891  <target name="init-oaiconfig" if="oaiconfig.present">
892    <echo>Writing out baseURL ${url}oaiserver to ${web.writableclasses}/OAIConfig.xml</echo>
893    <copy file="${basedir}/resources/oai/OAIConfig.xml" tofile="${web.writableclasses}/OAIConfig.xml"/>
894    <rsr verbosity="1" file="${web.writableclasses}/OAIConfig.xml" pattern="&lt;baseURL&gt;.*&lt;/baseURL&gt;" replacement="&lt;baseURL&gt;${url}oaiserver&lt;/baseURL&gt;" />   
895  </target>
896
897  <target name="stop" depends="init,stop-tomcat,stop-derby"
898    description="Shutdown the Tomcat server."/>
899 
900  <target name="restart" description="Shutdown and restart Tomcat"  depends="init,stop,start"/>
901
902  <!-- =========== Help targets ===================================  -->
903 
904  <property name="install-command" value="ant [options] prepare install"/>
905 
906  <target name="usage" description="Print a help message">
907    <echo message="  Execute 'ant -projecthelp' for a list of targets."/>
908    <echo message="  Execute 'ant -help' for Ant help."/>
909    <echo>
910  To install Greenstone3, run '${install-command}'.
911    There are properties defined in build.properties. The install
912      process will ask you if these properties are set correctly.
913      To avoid this prompt, use the '-Dproperties.accepted=yes'
914      option.
915    To log the output, use the '-logfile build.log' option.
916  The README.txt file has more information about the ant targets
917    and install process.
918    </echo>
919  </target>
920 
921  <target name="help" depends="usage" description="Print a help message"/>
922 
923  <target name="debug" depends="init" description="Display all the currently used properties">
924    <echoproperties/>
925  </target>
926
927  <!-- ====== initialization and setup targets ================== -->
928
929  <target name="accept-properties" unless="properties.accepted">
930    <input addproperty="properties.ok" validargs="y,n">The following properties (among others) are being used from a build.properties file found in this directory:
931      tomcat.server=${tomcat.server}
932      tomcat.port=${tomcat.port}
933      tomcat.installed.path=${tomcat.installed.path} (this is the location of Tomcat's base dir if it is already installed)
934      proxy.host=${proxy.host}
935      proxy.port=${proxy.port}
936      disable.collection.building=${disable.collection.building}
937      If these are not acceptable, please change them and rerun this target. Continue [y/n]?
938    </input>
939    <condition property="do.abort">
940      <equals arg1="n" arg2="${properties.ok}"/>
941    </condition>
942    <fail if="do.abort">Build aborted by user. Please change your properties settings and re-run the target</fail>
943  </target>
944 
945  <!-- this sets up some initial properties -->
946  <target name="init">
947
948    <!-- has the gs3-setup script been run?? -->
949    <condition property="gs3-setup-not-done">
950      <not>
951    <isset property="env.GSDL3HOME"/>
952      </not>
953    </condition>
954
955    <!--<fail if="gs3-setup-not-done" message="please run 'gs3-setup' (Windows) or 'source gs3-setup.sh' (Linux/Mac) before running this target."/>-->
956   
957    <condition property="java.too.old">
958      <or>
959        <equals arg1="1.1" arg2="${ant.java.version}"/>
960        <equals arg1="1.2" arg2="${ant.java.version}"/>
961        <equals arg1="1.3" arg2="${ant.java.version}"/>
962      </or>
963    </condition>
964    <fail if="java.too.old" message="You need Java 1.4 or greater to run Greenstone 3"/>
965   
966    <available file="${basedir}/gli" property="gli.present"/>
967    <available file="${basedir}/common-src" property="common.src.present"/>
968    <available file="${basedir}/gs2build" property="gs2build.present"/>
969    <available file="${gnome-lib-dir}" property="gnome-lib.present"/>
970
971    <condition property="tomcat.islocal">
972      <or>
973        <not><isset property="tomcat.installed.path"/></not>
974        <equals arg1="" arg2="${tomcat.installed.path}"/>
975      </or>
976    </condition>
977   
978    <echo>tomcat.port = ${tomcat.port}</echo>
979
980    <condition property="proxy.present">
981      <and>
982        <isset property="proxy.host"/>
983        <not><equals arg1="" arg2="${proxy.host}"/></not>
984      </and>
985    </condition>
986
987    <!--
988    the next block checks if the bundled tomcat is present in the 'packages' directory,
989    and checks for the lethal combination of tomcat 7 and java 1.4. Test for
990    tomcat6 is based on the presence of a file inserted by greenstone into the tomcat6
991    download, as there is no other surefire way to check tomcat version under java 1.4
992    -->
993    <condition property="packages.tomcat.ispresent" value="true" else="false">
994      <available file="packages/tomcat"/>
995    </condition>
996    <condition property="packages.tomcat.istomcat7" value="true" else="false">
997      <available file="packages/tomcat/tomcat7.txt"/>
998    </condition>
999    <if>
1000      <bool>
1001        <and>
1002          <istrue value="${packages.tomcat.ispresent}"/>
1003          <istrue value="${packages.tomcat.istomcat7}"/>
1004          <equals arg1="1.4" arg2="${ant.java.version}"/>
1005        </and>
1006      </bool>
1007      <fail>Your Java (version 1.4) is too old to work with the bundled Apache Tomcat (version 6). Please upgrade to Java version 1.5 or greater. Alternatively, you may remove the bundled Apache Tomcat from the 'packages' folder and then run 'ant prepare-tomcat'.</fail>
1008    </if>
1009
1010  </target>
1011
1012  <target name="setup-proxy" depends="init" if="proxy.present">
1013    <condition property="ask.user">
1014      <or>
1015        <equals arg1="" arg2="${proxy.user}"/>
1016        <equals arg1="" arg2="${proxy.password}"/>
1017      </or>
1018    </condition>
1019   
1020    <getuserandpassword message="Using proxy: ${proxy.host}:${proxy.port}" if="ask.user" username="${proxy.user}" userproperty="proxy.username" pwordproperty="proxy.password"/>
1021    <mysetproxy proxyhost="${proxy.host}" proxyport="${proxy.port}" proxyuser="${proxy.username}" proxypassword="${proxy.password}"/>
1022  </target>
1023 
1024  <target name="copy-dot-in-files" depends="init"
1025      description="Copies all resources .in files to version without the .in suffix" >
1026    <if><bool><available file="${basedir}/resources/tomcat/greenstone3.xml"/></bool>
1027      <copy file="${basedir}/resources/tomcat/greenstone3.xml" tofile="${basedir}/resources/tomcat/greenstone3.xml.backup"  overwrite="true"/>
1028    </if>
1029   
1030    <copy file="${basedir}/resources/tomcat/greenstone3.xml.in" tofile="${basedir}/resources/tomcat/greenstone3.xml"  overwrite="true"/>
1031    <if><bool><available file="${basedir}/resources/tomcat/server_tomcat5.xml"/></bool>
1032      <copy file="${basedir}/resources/tomcat/server_tomcat5.xml" tofile="${basedir}/resources/tomcat/server_tomcat5.xml.backup"  overwrite="true"/>
1033    </if>
1034    <copy file="${basedir}/resources/tomcat/server_tomcat5.xml.in" tofile="${basedir}/resources/tomcat/server_tomcat5.xml"  overwrite="true"/>
1035    <if><bool><available file="${basedir}/resources/tomcat/server_tomcat7.xml"/></bool>
1036      <copy file="${basedir}/resources/tomcat/server_tomcat7.xml" tofile="${basedir}/resources/tomcat/server_tomcat7.xml.backup"  overwrite="true"/>
1037    </if>
1038    <copy file="${basedir}/resources/tomcat/server_tomcat7.xml.in" tofile="${basedir}/resources/tomcat/server_tomcat7.xml" overwrite="true"/>
1039    <if><bool><available file="${basedir}/resources/tomcat/web.xml"/></bool>
1040      <copy file="${basedir}/resources/tomcat/web.xml" tofile="${basedir}/resources/tomcat/web.xml.backup"  overwrite="true"/>
1041    </if>
1042    <copy file="${basedir}/resources/tomcat/web.xml.in" tofile="${basedir}/resources/tomcat/web.xml"  overwrite="true"/>
1043    <if><bool><available file="${basedir}/resources/oai/OAIConfig.xml"/></bool>
1044    <copy file="${basedir}/resources/oai/OAIConfig.xml" tofile="${basedir}/resources/oai/OAIConfig.xml.backup"  overwrite="true"/>
1045    </if>
1046    <copy file="${basedir}/resources/oai/OAIConfig.xml.in" tofile="${basedir}/resources/oai/OAIConfig.xml"  overwrite="true"/>
1047    <if><bool><available file="${basedir}/resources/cgi/gsdl3site.cfg"/></bool>
1048      <copy file="${basedir}/resources/cgi/gsdl3site.cfg" tofile="${basedir}/resources/cgi/gsdl3site.cfg.backup" overwrite="true"/>
1049    </if>
1050    <copy file="${basedir}/resources/cgi/gsdl3site.cfg.in" tofile="${basedir}/resources/cgi/gsdl3site.cfg" overwrite="true"/>
1051    <if><bool><available file="${basedir}/resources/web/global.properties"/></bool>
1052    <copy file="${basedir}/resources/web/global.properties" tofile="${basedir}/resources/web/global.properties.backup" overwrite="true"/>
1053    </if>
1054    <copy file="${basedir}/resources/web/global.properties.in" tofile="${basedir}/resources/web/global.properties" overwrite="true"/>
1055    <if><bool><available file="${basedir}/resources/web/log4j.properties"/></bool>
1056    <copy file="${basedir}/resources/web/log4j.properties" tofile="${basedir}/resources/web/log4j.properties.backup" overwrite="true"/>
1057    </if>
1058    <copy file="${basedir}/resources/web/log4j.properties.in" tofile="${basedir}/resources/web/log4j.properties" overwrite="true"/>
1059  </target>
1060  <!-- ========== Web app Targets ================================ -->
1061 
1062  <target name="prepare-web" depends="init">
1063    <mkdir dir="${web.writablehome}/applet"/>
1064    <mkdir dir="${web.writablehome}/logs"/>
1065    <mkdir dir="${web.writablehome}/logs/tmp"/>
1066  </target>
1067 
1068  <!-- if we are using java 1.5+, we need the xalan.jar file in web/WEB-INF/lib,  but if we are using java 1.4, we can't have it there.
1069       The test for whether we need it assumes we won't be trying to compile GS3 against Java versions less than 1.4. -->
1070  <target name="configure-java-version" depends="init"
1071    description="Activates or deactivates some jar libraries as needed depending on your java version">
1072
1073    <available property="have.xalan.jar" file="${web.lib}/xalan.jar"/>
1074    <condition property="need.xalan.jar">
1075      <or>
1076        <not><equals arg1="1.4" arg2="${ant.java.version}"/></not>
1077      </or>
1078    </condition>
1079
1080    <!-- if they have xalan.jar but dont need it -->
1081    <if>
1082      <bool>
1083        <and>
1084          <isset property="have.xalan.jar"/>
1085          <not><isset property="need.xalan.jar"/></not>
1086        </and>
1087      </bool>
1088      <antcall target="deactivate-xalan-jar"/>
1089    </if>
1090
1091    <!-- if they need xalan.jar but dont have it -->
1092    <if>
1093      <bool>
1094        <and>
1095          <not><isset property="have.xalan.jar"/></not>
1096          <isset property="need.xalan.jar"/>
1097        </and>
1098      </bool>
1099      <antcall target="activate-xalan-jar"/>
1100    </if>
1101
1102  </target>
1103 
1104  <target name="activate-xalan-jar">
1105    <echo>activating xalan.jar</echo>
1106    <copy file="${web.lib}/xalan.jar.tmp" tofile="${web.lib}/xalan.jar"/>
1107    <if>
1108      <bool>
1109    <and>
1110      <isset property="current.os.ismac"/>
1111      <available file="${catalina.home}/common/endorsed" type="dir"/>
1112    </and>
1113      </bool>
1114      <copy file="${web.lib}/xalan.jar.tmp" tofile="${catalina.home}/common/endorsed/xalan.jar"/>
1115    </if>
1116  </target>
1117
1118  <target name="deactivate-xalan-jar">
1119    <echo>deactivating xalan.jar</echo>
1120    <delete file="${web.lib}/xalan.jar"/>
1121    <!-- should we be deleting common/endorsed/xalan.jar on mac?? -->
1122  </target>
1123
1124
1125  <target name="prepare-collections" depends="init"
1126    description="Unpack all the collections from their svn zipped versions">
1127    <property name="collect.dir" value="${web.home}/sites/localsite/collect"/>
1128    <property name="index.zip" value="index.zip"/>
1129
1130    <echo message="installing collections..."/>
1131    <antcall target="gs2mgdemo-install"/>
1132    <antcall target="gs2mgppdemo-install"/>
1133    <antcall target="gberg-install"/>
1134    <antcall target="lucene-jdbm-demo-install"/>
1135  </target>
1136
1137  <target name="gs2mgdemo-prepare" if="collect.dir">
1138    <property name="gs2mgdemo.dir" value="${collect.dir}/gs2mgdemo"/>
1139
1140    <condition property="gs2mgdemo.present">
1141      <and>
1142        <available file="${gs2mgdemo.dir}/${index.zip}"/>
1143      </and>
1144    </condition>
1145  </target>
1146
1147  <target name="gs2mgdemo-install" if="gs2mgdemo.present" depends="gs2mgdemo-prepare">
1148    <unzip dest="${gs2mgdemo.dir}" src="${gs2mgdemo.dir}/${index.zip}" />
1149    <echo>collection gs2mgdemo installed</echo>
1150  </target>
1151
1152  <target name="gs2mgppdemo-prepare" if="collect.dir">
1153    <property name="gs2mgppdemo.dir" value="${collect.dir}/gs2mgppdemo"/>
1154 
1155    <condition property="gs2mgppdemo.present">
1156      <and>
1157        <available file="${gs2mgppdemo.dir}/${index.zip}"/>
1158      </and>
1159    </condition>
1160  </target>
1161
1162  <target name="gs2mgppdemo-install" if="gs2mgppdemo.present" depends="gs2mgppdemo-prepare">
1163    <unzip dest="${gs2mgppdemo.dir}" src="${gs2mgppdemo.dir}/${index.zip}" />
1164    <echo>collection gs2mgppdemo installed</echo>
1165  </target>   
1166
1167  <target name="gberg-prepare" if="collect.dir">
1168    <property name="gberg.dir" value="${collect.dir}/gberg"/>
1169    <available file="${gberg.dir}/index/${index.zip}" property="gberg.present"/>
1170  </target>
1171
1172  <target name="gberg-install" if="gberg.present" depends="gberg-prepare">
1173    <unzip dest="${gberg.dir}/index" src="${gberg.dir}/index/${index.zip}"/>
1174    <echo>collection gberg installed</echo>
1175  </target>
1176
1177  <target name="lucene-jdbm-demo-prepare" if="collect.dir">
1178    <property name="lucene-jdbm-demo.dir" value="${collect.dir}/lucene-jdbm-demo"/>
1179    <available file="${lucene-jdbm-demo.dir}/${index.zip}" property="lucene-jdbm-demo.present"/>
1180  </target>
1181
1182  <target name="lucene-jdbm-demo-install" if="lucene-jdbm-demo.present" depends="lucene-jdbm-demo-prepare">
1183    <unzip dest="${lucene-jdbm-demo.dir}" src="${lucene-jdbm-demo.dir}/${index.zip}"/>
1184    <echo>collection lucene-jdbm-demo installed</echo>
1185  </target>
1186
1187 
1188  <target name="install-solr-ext" depends="init" >
1189    <exec executable="ant.bat" osfamily="windows" dir="${solr-ext.home}" spawn="false">
1190      <arg value="add-service"/>
1191    </exec>
1192    <exec executable="ant" os="${os.unix}" dir="${solr-ext.home}" spawn="false">
1193      <arg value="add-service"/>
1194    </exec>
1195    <antcall target="solr-jdbm-demo-install"/>
1196  </target>
1197
1198  <target name="solr-jdbm-demo-prepare" if="collect.dir">
1199    <property name="solr-jdbm-demo.dir" value="${collect.dir}/solr-jdbm-demo"/>
1200    <available file="${solr-jdbm-demo.dir}/${index.zip}" property="solr-jdbm-demo.present"/>
1201  </target>
1202
1203  <target name="solr-jdbm-demo-install" if="solr-jdbm-demo.present" depends="solr-jdbm-demo-prepare">
1204    <unzip dest="${solr-jdbm-demo.dir}" src="${solr-jdbm-demo.dir}/${index.zip}"/>
1205    <echo>collection solr-jdbm-demo installed</echo>
1206  </target>
1207
1208  <!-- Until 64 bit Linux and Mac (Lion) machines can generate a working IsisGdl,
1209       use the ones generated on a 32 bit Linux and Mac (Leopard), respectively -->
1210  <target name="get-isisgdl" if="${current.os.isunix}">
1211    <exec executable="uname" dir="${basedir}" failonerror="false"
1212      outputproperty="uname.val">
1213      <arg value="-m"/>
1214    </exec>
1215   
1216    <if><bool><equals arg1="${uname.val}" arg2="x86_64"/></bool>
1217      <echo>Bitness: ${uname.val}</echo>
1218      <if><bool><contains string="${os.bin.dir}" substring="darwin" casesensitive="false"/></bool>
1219    <get src="http://www.greenstone.org/caveat-emptor/IsisGdl.macleopard"
1220             dest="${basedir}/gs2build/bin/${os.bin.dir}/IsisGdl"/>   
1221      </if>
1222      <if><bool><contains string="${os.bin.dir}" substring="linux" casesensitive="false"/></bool>
1223    <get src="http://www.greenstone.org/caveat-emptor/IsisGdl.bin32"
1224             dest="${basedir}/gs2build/bin/${os.bin.dir}/IsisGdl"/>
1225      </if>
1226      <chmod file="${basedir}/gs2build/bin/${os.bin.dir}/IsisGdl" perm="755"/>
1227    </if>
1228  </target>
1229
1230  <target name="set-perl-shebangs" depends="perl-for-building">
1231    <if>
1232      <bool>
1233        <and><isset property="perl.path"/>
1234          <not><equals arg1="${perl.path}" arg2=""/></not>
1235        </and>
1236      </bool>
1237
1238      <if><bool><istrue value="${current.os.iswindows}"/></bool>
1239    <property name="perl.exec" value="${perl.path}perl.exe"/>
1240    <else>
1241      <property name="perl.exec" value="${perl.path}perl"/>   
1242    </else>
1243      </if>
1244
1245      <!--<echo>**** PERLPATH: ${perl.path}</echo>-->
1246      <echo>Setting perl shebangs to Perl Exec: ${perl.exec}</echo>
1247
1248      <!-- set the shebangs in the cgi files to point to the correct perlpath -->
1249      <if>
1250    <bool><not><equals arg1="${web.home}" arg2="${web.writablehome}"></equals></not></bool>
1251    <mkdir dir="${web.writablehome}"/>
1252    <copy file="${web.home}/WEB-INF/cgi/gliserver.pl"       tofile="${web.writablehome}/WEB-INF/cgi/gliserver.pl"       overwrite="true"/>
1253    <copy file="${web.home}/WEB-INF/cgi/metadata-server.pl" tofile="${web.writablehome}/WEB-INF/cgi/metadata-server.pl" overwrite="true"/>
1254    <copy file="${web.home}/WEB-INF/cgi/checksum.pl"        tofile="${web.writablehome}/WEB-INF/cgi/checksum.pl"        overwrite="true"/>
1255      </if>
1256
1257      <rsr verbosity="1" file="${web.writablehome}/WEB-INF/cgi/gliserver.pl" pattern="^#!.*" replacement="#!${perl.exec} -w" lines="1"/>
1258      <rsr verbosity="1" file="${web.writablehome}/WEB-INF/cgi/metadata-server.pl" pattern="^#!.*" replacement="#!${perl.exec} -w" lines="1"/>
1259      <rsr verbosity="1" file="${web.writablehome}/WEB-INF/cgi/checksum.pl" pattern="^#!.*" replacement="#!${perl.exec} -w" lines="1"/>     
1260      <else>
1261    <echo>WARNING: perl.path is empty. Unable to set the shebangs in the perl files in ${web.writablehome}/WEB-INF/cgi</echo>
1262      </else>
1263    </if>
1264  </target>
1265
1266  <target name="configure-web" depends="init,perl-for-building"
1267    description="Configure only the web app config files">
1268    <!-- we want a unix path in the global.properties file -->
1269    <pathconvert targetos="unix" property="src.gsdl3.home.unix">
1270      <path path="${web.home}"/>
1271    </pathconvert>
1272    <pathconvert targetos="unix" property="src.gsdl3.writablehome.unix">
1273      <path path="${web.writablehome}"/>
1274    </pathconvert>
1275
1276    <antcall target="set-perl-shebangs" inheritAll="true" />
1277   
1278    <filter token="gsdlhome" value="${gs2build.home}"/>
1279    <filter token="gsdl3srchome" value="${basedir}"/>
1280    <filter token="gsdl3home" value="${src.gsdl3.home.unix}"/>
1281    <filter token="gsdl3writablehome" value="${src.gsdl3.writablehome.unix}"/>
1282    <filter token="gsdl3version" value="${app.version}"/>
1283    <filter token="tomcat.server" value="${tomcat.server}"/>
1284    <filter token="tomcat.port" value="${tomcat.port}"/>
1285    <filter token="derbyserver" value="${derby.server}"/>
1286    <filter token="derbyserver.port" value="${derby.server.port}"/>
1287    <filter token="perlpath" value="${escaped.perl.path}"/>
1288    <filter token="disable.collection.building" value="${disable.collection.building}"/>
1289    <copy file="${basedir}/resources/cgi/gsdl3site.cfg" tofile="${web.writablehome}/WEB-INF/cgi/gsdl3site.cfg" filtering="true" overwrite="true"/>
1290    <copy file="${basedir}/resources/web/global.properties" tofile="${web.writableclasses}/global.properties" filtering="true" overwrite="true"/>
1291    <copy file="${basedir}/resources/web/log4j.properties" tofile="${web.writableclasses}/log4j.properties" filtering="true" overwrite="true"/>
1292    <if><bool><istrue value="${gsdl3home.isreadonly}"/></bool>
1293      <!-- uncomment the writablehome properties -->
1294      <rsr verbosity="1" file="${web.writableclasses}/global.properties" pattern="^#gsdl3\.(writable{1})?home" replacement="gsdl3.$1home" />
1295    </if>
1296    <chmod file="${web.writableclasses}/global.properties" perm="644"/>
1297    <chmod file="${web.writableclasses}/log4j.properties" perm="644"/>
1298  </target>
1299
1300  <target name="compile-web" depends="init">
1301    <javac srcdir="${web.classes}"
1302      destdir="${web.classes}"
1303      includeantruntime="${compile.includeantruntime}"
1304      debug="${compile.debug}"
1305      deprecation="${compile.deprecation}"
1306      optimize="${compile.optimize}"
1307      encoding="${compile.encoding}">
1308      <classpath><path refid="compile.classpath"/></classpath>
1309    </javac>
1310  </target>
1311
1312  <target name="compile-classpath-jars" depends="init">
1313    <if><bool><available file="admin/cp.mf"/></bool>
1314      <jar destfile="admin/cp.jar" manifest="admin/cp.mf"/>
1315    </if>
1316    <if><bool><available file="${lib.java}/cp.mf"/></bool>
1317      <jar destfile="${lib.java}/cp.jar" manifest="${lib.java}/cp.mf"/>
1318    </if>
1319    <if><bool><available file="${lib.jni}/cp.mf"/></bool>
1320      <jar destfile="${lib.jni}/cp.jar" manifest="${lib.jni}/cp.mf"/>
1321    </if>
1322    <if><bool><available file="${web.lib}/cp.mf"/></bool>
1323      <jar destfile="${web.lib}/cp.jar" manifest="${web.lib}/cp.mf"/>
1324    </if>
1325    <jar destfile="cp.jar">
1326      <manifest>
1327        <attribute name="Class-Path" value="server.jar admin/cp.jar lib/java/cp.jar lib/jni/cp.jar web/WEB-INF/lib/cp.jar"/>
1328      </manifest>
1329    </jar>
1330  </target>
1331
1332  <target name="clean-classpath-jars" depends="init">
1333    <delete file="admin/cp.jar"/>
1334    <delete file="${lib.java}/cp.jar"/>
1335    <delete file="${lib.jni}/cp.jar"/>
1336    <delete file="${web.lib}/cp.jar"/>
1337    <delete file="cp.jar"/>
1338  </target>
1339
1340
1341  <target name="svnupdate-web" unless="nosvn.mode">
1342    <exec executable="svn">
1343      <arg value="update"/>
1344      <arg value="${web.writablehome}"/>
1345      <arg value="-r"/><arg value="${branch.revision}"/>
1346    </exec>
1347  </target>
1348
1349  <target name="update-web" depends="init,svnupdate-web,configure-web"
1350    description="update only the web stuff (config files)"/>
1351
1352  <!-- ======================= Tomcat Targets ========================== -->
1353 
1354  <!-- this target downloads and installs Tomcat -->
1355  <!-- we download tomcat (version 7 for Java 1.5 and later, version 5 for Java 1.4 plus the 1.4 compatibility package). -->
1356  <target name="prepare-tomcat" depends="init,setup-proxy" if="tomcat.islocal"
1357    description="downloads the appropriate version of Tomcat (Tomcat 5 if using Java 1.4, Tomcat 7 if using Java 1.5 or higher). If you want to change which version of Java you are using between 1.4 and 1.5/7 then you need to run prepare-tomcat">
1358  <if>
1359      <bool>
1360        <not><available file="${packages.home}/tomcat/.flagfile"/></not>
1361      </bool>
1362
1363      <!-- check that packages dir is there -->
1364      <mkdir dir="${packages.home}"/>
1365      <get src="http://www.greenstone.org/gs3files/${tomcat.version}.zip"
1366        dest="${packages.home}/${tomcat.version}.zip"
1367        usetimestamp="true"/>
1368      <unzip src="${packages.home}/${tomcat.version}.zip"
1369        dest="${packages.home}"/>
1370     
1371      <!-- If we are using Java 1.4, we'd be using tomcat 5.5 in which case
1372      we would need to have the tomcat compat package to work with Java 1.4-->
1373      <if>
1374    <bool><equals arg1="1.4" arg2="${ant.java.version}"/></bool>
1375    <get src="http://www.greenstone.org/gs3files/${tomcat.version}-compat.zip"
1376      dest="${packages.home}/${tomcat.version}-compat.zip"
1377      usetimestamp="true"/>
1378    <unzip src="${packages.home}/${tomcat.version}-compat.zip"
1379      dest="${packages.home}"/>
1380      </if>
1381     
1382      <!-- delete any existing tomcat -->
1383      <delete dir="${packages.home}/tomcat"/>
1384      <move todir="${packages.home}/tomcat">
1385        <fileset dir="${packages.home}/${tomcat.version}"/>
1386      </move>
1387      <!--
1388      <copy file="${basedir}/resources/tomcat/setclasspath.bat"
1389        tofile="${packages.home}/tomcat/bin/setclasspath.bat"
1390        overwrite="true"/>
1391      <copy file="${basedir}/resources/tomcat/setclasspath.sh"
1392        tofile="${packages.home}/tomcat/bin/setclasspath.sh"
1393        overwrite="true"/>
1394      -->
1395      <!-- make sure we have execute permission for the .sh files -->
1396      <chmod dir="${packages.home}/tomcat/bin" perm="ugo+rx"
1397        includes="*.sh"/>   
1398
1399      <echo file="${packages.home}/tomcat/.flagfile">
1400        the timestamp of this file is the time that tomcat was extracted from the zip files.
1401        it is used to figure out whether the files need to be refreshed or not in `ant prepare-tomcat`
1402      </echo>
1403
1404      <!-- this is not strictly a prepare tomcat thing, but if one changes
1405      Java, then they need to change tomcat as well, so might as well call
1406      it here -->
1407      <antcall target="configure-java-version"/>
1408      <else>
1409        <echo>Tomcat has been prepared, will not prepare</echo>
1410        <echo>Delete ${packages.home}/tomcat/.flagfile to force refresh</echo>
1411      </else>
1412
1413    </if>
1414
1415  </target>
1416 
1417  <target name="configure-tomcat" depends="init,configure-tomcat-local,configure-tomcat-external"/>
1418 
1419  <target name="configure-tomcat-local" depends="init,perl-for-building" if="tomcat.islocal">
1420    <!-- re-setup the server.xml file -->
1421    <copy file="${basedir}/resources/tomcat/server_tomcat${tomcat.version.major}.xml"
1422        tofile="${packages.home}/tomcat/conf/server.xml" overwrite="true">
1423      <filterset>
1424        <filter token="port" value="${tomcat.port}"/>
1425        <filter token="shutdown-port" value="${tomcat.shutdown.port}"/>
1426      </filterset>
1427    </copy>
1428    <!-- set up the greenstone3 context, it may have a custom name specified in build.properties -->
1429    <if><bool><not><equals arg1="greenstone3" arg2="${custom.context}"></equals></not></bool>
1430        <copy file="${basedir}/resources/tomcat/greenstone3.xml" tofile="${basedir}/resources/tomcat/${custom.context}.xml" overwrite="true"/>
1431    </if>
1432    <copy file="${basedir}/resources/tomcat/${custom.context}.xml" tofile="${packages.home}/tomcat/conf/Catalina/localhost/${custom.context}.xml" overwrite="true">
1433      <filterset>
1434        <filter token="gsdl3webhome" value="${web.home}"/>
1435        <filter token="gsdl3webwritablehome" value="${web.writablehome}"/>
1436    <filter token="privilegedattribute" value="${privileged.attribute}"/>
1437    <filter token="allowedIPs" value="${allowed.IPs}"/>
1438    <filter token="derbyserver" value="${derby.server}"/>
1439    <filter token="derbyserverport" value="${derby.server.port}"/>
1440      </filterset>
1441    </copy>
1442    <if>
1443        <bool>
1444            <and>
1445                <available file="${packages.home}/tomcat/conf/Catalina/localhost/greenstone3.xml"/>
1446                <not><equals arg1="greenstone3" arg2="${custom.context}"></equals></not>
1447            </and>
1448        </bool>
1449        <delete file="${packages.home}/tomcat/conf/Catalina/localhost/greenstone3.xml"/>
1450    </if>
1451   
1452    <!-- set up the greenstone3 web.xml file -->
1453    <copy file="${basedir}/resources/tomcat/web.xml" tofile="${packages.home}/tomcat/conf/web.xml" overwrite="true">
1454      <filterset>
1455    <filter token="perlpath" value="${perl.path}"/>
1456      </filterset>
1457    </copy>
1458  </target>
1459 
1460  <target name="configure-tomcat-external" depends="init" unless="tomcat.islocal">
1461    <!-- re-setup the server.xml file -->
1462    <!-- need to edit the config file, or do we get the user to do this???-->
1463  </target>
1464
1465  <target name="configure-solr-ext" depends="init" >
1466    <!-- re-setup the web/ext/solr/solr.xml file -->
1467    <copy file="${web.home}/ext/solr/solr.xml.in"
1468      tofile="${gsdl3.writablehome}/ext/solr/solr.xml" filtering="true" overwrite="true">
1469      <filterset>
1470        <filter token="gsdl3.home" value="${src.gsdl3.home.unix}"/>
1471        <filter token="gsdl3.writablehome" value="${src.gsdl3.writablehome.unix}"/>
1472      </filterset>
1473    </copy>
1474  </target>
1475 
1476  <!-- This target runs tomcat's "bin/catalina.bat(.sh) jpda start"
1477       to allow debugging the running GS3 server in Eclipse. See the instructions at
1478       http://www.wikijava.org/wiki/Debugging_a_servlet_with_tomcat_and_Eclipse_tutorial
1479       on how to use this with eclipse
1480    -->
1481  <target name="debug-start-tomcat" description="Startup Tomcat for debugger" depends="init" if="tomcat.islocal">
1482    <property name="tomcat.classpath" refid="local.tomcat.classpath"/>
1483    <property name="tomcat.path" refid="local.tomcat.path"/>
1484
1485    <if><bool>
1486    <isset property="fedora.maxpermsize"/></bool>
1487      <property name="catalina.opts" value="-Djava.util.prefs.syncInterval=2000000 -DGSDL3HOME=$GSDL3HOME -DGSDLOS=$GSDLOS -DPATH=$PATH -Xmx400M ${fedora.maxpermsize}"/>
1488      <else>
1489    <property name="catalina.opts" value="-Djava.util.prefs.syncInterval=2000000 -DGSDL3HOME=$GSDL3HOME -DGSDLOS=$GSDLOS -DPATH=$PATH -Xmx400M"/>
1490      </else>
1491    </if>
1492
1493    <echo file="${catalina.home}/bin/setenv.bat">set CLASSPATH=${tomcat.classpath}</echo>
1494    <echo file="${catalina.home}/bin/setenv.sh">export CLASSPATH=${tomcat.classpath}</echo>
1495   
1496    <exec executable="${catalina.home}/bin/catalina.sh" os="${os.unix}" dir="${catalina.home}/bin" spawn="false">
1497      <arg value="jpda" />
1498      <arg value="start" />
1499      <env key="JPDA_ADDRESS" value="8000"/> <!-- for debugging Tomcat in Eclipse -->
1500      <env key="JPDA_TRANSPORT" value="dt_socket"/> <!-- for debugging Tomcat in Eclipse -->
1501      <!--<env key="GSDLOS" value="linux"/> do we need this?? -->
1502      <env key="PATH" path="${tomcat.path}"/>
1503      <env key="CATALINA_OPTS" value="${catalina.opts}"/>
1504      <env key="CATALINA_HOME" value="${catalina.home}"/>
1505      <env key="CLASSPATH" path="${tomcat.classpath}"/>
1506      <env key="LD_LIBRARY_PATH" path="${env.LD_LIBRARY_PATH}:${lib.jni}"/>
1507      <env key="DYLD_LIBRARY_PATH" path="${env.DYLD_LIBRARY_PATH}:${lib.jni}:${gdbm.home}/lib"/> <!-- for mac os --> <!-- need gdbm here these days ??-->
1508      <env key="WNHOME" path="${wn.home}"/>
1509      <env key="FEDORA_HOME" path="${fedora.home}"/>
1510    </exec>
1511    <exec executable="${catalina.home}/bin/catalina.bat" osfamily="windows" dir="${catalina.home}/bin" spawn="true">
1512      <arg value="jpda" />
1513      <arg value="start" />
1514      <env key="JPDA_ADDRESS" value="8000"/> <!-- for debugging Tomcat in Eclipse -->
1515      <env key="JPDA_TRANSPORT" value="dt_socket"/> <!-- for debugging Tomcat in Eclipse -->
1516      <env key="GSDLOS" value="windows"/>
1517      <env key="GSDL3HOME" value="${basedir}"/>
1518      <env key="Path" path="${tomcat.path}"/>
1519      <env key="PATH" path="${tomcat.path}"/>
1520      <env key="CATALINA_OPTS" value="${catalina.opts}"/>
1521      <env key="CATALINA_HOME" value="${catalina.home}"/>
1522      <env key="CLASSPATH" path="${tomcat.classpath}"/>
1523      <env key="FEDORA_HOME" path="${fedora.home}"/>
1524    </exec>
1525    <!-- wait for the server to startup in case other targets need it running -->
1526    <waitfor maxwait="5" maxwaitunit="second">
1527      <and>
1528        <socket server="${tomcat.server}" port="${tomcat.port}"/>
1529        <http url="http://${tomcat.server}:${tomcat.port}${app.path}/index.html"/>
1530      </and>
1531    </waitfor>
1532  </target> 
1533 
1534  <target name="start-tomcat" description="Startup only Tomcat" depends="check-tomcat-started">
1535
1536    <if><bool><istrue value="${tomcat.isstarted}"/></bool>
1537      <echo>**************************************</echo>
1538      <echo>A WEB SERVER IS ALREADY RUNNING ON http://${tomcat.server}:${tomcat.port}. NOT STARTING.</echo>
1539      <echo>**************************************</echo>
1540      <else>
1541    <antcall target="force-start-tomcat"/>
1542      </else>
1543      </if>
1544  </target>
1545
1546  <!-- Another way: http://ptrthomas.wordpress.com/2006/03/25/how-to-start-and-stop-tomcat-from-ant/ -->
1547  <target name="force-start-tomcat" description="Startup only Tomcat" depends="init" if="tomcat.islocal">
1548
1549    <property name="tomcat.classpath" refid="local.tomcat.classpath"/>
1550    <property name="tomcat.path" refid="local.tomcat.path"/>
1551
1552    <if><bool>
1553    <isset property="fedora.maxpermsize"/></bool>
1554      <property name="catalina.opts" value="-Djava.util.prefs.syncInterval=2000000 -DGSDL3HOME=$GSDL3HOME -DGSDLOS=$GSDLOS -DPATH=$PATH -Xmx400M ${fedora.maxpermsize}"/>
1555      <else>
1556    <property name="catalina.opts" value="-Djava.util.prefs.syncInterval=2000000 -DGSDL3HOME=$GSDL3HOME -DGSDLOS=$GSDLOS -DPATH=$PATH -Xmx400M"/>
1557      </else>
1558    </if>
1559
1560    <echo file="${catalina.home}/bin/setenv.bat">set CLASSPATH=${tomcat.classpath}</echo>
1561    <echo file="${catalina.home}/bin/setenv.sh">export CLASSPATH=${tomcat.classpath}</echo>
1562
1563    <!-- using osfamily instead of testing os against os.windows list of recognised windows versions
1564     so that future windows versions are included. See http://simonharrer.wordpress.com/tag/osfamily/
1565    Can't use the osfamily test for linux-type machines as a group since osfamily=unix is separate from osfamily=mac,
1566    see http://ant-contrib.sourceforge.net/tasks/tasks/osfamily.html -->
1567
1568    <exec executable="${catalina.home}/bin/startup.sh" os="${os.unix}" dir="${catalina.home}/bin" spawn="false">
1569      <!--<env key="GSDLOS" value="linux"/> do we need this?? -->
1570      <env key="GSDL3HOME" value="${basedir}"/>
1571      <env key="PATH" path="${tomcat.path}"/>
1572      <env key="CATALINA_OPTS" value="${catalina.opts}"/>
1573      <env key="CATALINA_HOME" value="${catalina.home}"/>
1574      <env key="CLASSPATH" path="${tomcat.classpath}"/>
1575      <env key="LD_LIBRARY_PATH" path="${env.LD_LIBRARY_PATH}:${lib.jni}"/>
1576      <env key="DYLD_LIBRARY_PATH" path="${env.DYLD_LIBRARY_PATH}:${lib.jni}:${gdbm.home}/lib"/> <!-- for mac os --> <!-- need gdbm here these days ??-->
1577      <env key="WNHOME" path="${wn.home}"/>
1578      <env key="FEDORA_HOME" path="${fedora.home}"/>
1579    </exec>
1580    <exec executable="${catalina.home}/bin/startup.bat" osfamily="windows" dir="${catalina.home}/bin" spawn="true">
1581      <env key="GSDLOS" value="windows"/>
1582      <env key="GSDL3HOME" value="${basedir}"/>
1583      <env key="Path" path="${tomcat.path}"/>
1584      <env key="PATH" path="${tomcat.path}"/>
1585      <env key="CATALINA_OPTS" value="${catalina.opts}"/>
1586      <env key="CATALINA_HOME" value="${catalina.home}"/>
1587      <env key="CLASSPATH" path="${tomcat.classpath}"/>
1588      <env key="FEDORA_HOME" path="${fedora.home}"/>
1589    </exec>
1590    <!-- wait for the server to startup in case other targets need it running -->
1591    <waitfor maxwait="5" maxwaitunit="second">
1592      <and>
1593        <socket server="${tomcat.server}" port="${tomcat.port}"/>
1594        <http url="http://${tomcat.server}:${tomcat.port}${app.path}/index.html"/>
1595      </and>
1596    </waitfor>
1597
1598  </target>
1599
1600  <!--ant task http: http://www.jajakarta.org/ant/ant-1.6.1/docs/ja/manual/api/org/apache/tools/ant/taskdefs/condition/Http.html-->
1601  <target name="reconfigure" description="Reconfigure the message router">
1602    <waitfor maxwait="5" maxwaitunit="second">
1603      <http url="http://${tomcat.server}:${tomcat.port}${app.path}${server.default.servlet}?a=s&amp;sa=c"/>
1604    </waitfor>
1605  </target>
1606
1607  <!--Command-line args to Ant: http://www.jguru.com/faq/view.jsp?EID=471794-->
1608  <target name="reconfigure-collection" description="Reconfigure the collection">
1609    <waitfor maxwait="5" maxwaitunit="second">
1610      <http url="http://${tomcat.server}:${tomcat.port}${app.path}${server.default.servlet}?a=s&amp;sa=c&amp;sc=${collection}"/>
1611    </waitfor>
1612  </target>
1613
1614  <!-- windows: do we want to launch a webrowser?? -->
1615  <!-- shouldn't this test whether anything is running first?
1616       It's safer to always attempt to stop tomcat: that way we won't be dependent on the right time
1617       to check whether the server is stopped or still running before attempting to start again.
1618       This target, which was recently called force-stop-tomcat for a while but is back to being
1619       called stop-tomcat, now hides the Java exception output that appears whenever tomcat is already
1620       stopped as happens when stop-tomcat is called consecutively. -->
1621  <target name="force-stop-tomcat" description="Shutdown only Tomcat" depends="init" if="tomcat.islocal">
1622    <exec executable="${catalina.home}/bin/shutdown.sh" os="${os.unix}" dir="${catalina.home}/bin" spawn="false">
1623      <env key="FEDORA_HOME" path="${fedora.home}"/>
1624      <env key="CATALINA_HOME" value="${catalina.home}"/>
1625      <arg line=">/dev/null 2>&amp;1"/>
1626    </exec>
1627    <exec executable="${catalina.home}/bin/shutdown.bat" osfamily="windows" dir="${catalina.home}/bin" spawn="false">
1628      <env key="FEDORA_HOME" path="${fedora.home}"/>
1629      <env key="CATALINA_HOME" value="${catalina.home}"/>
1630      <arg line=">nul 2>&amp;1"/>
1631    </exec>   
1632  </target>
1633
1634  <!-- Can also try the "socket" condition in place of the "http" condition
1635       And also use a <waitfor> in place of <condition>, such as:
1636       <waitfor maxwait="5" maxwaitunit="second" timeoutproperty="tomcat.isstopped"><http url="..."/></waitfor>
1637       The http URL resolves to host:port/greenstone3
1638       Condition uses <http/> rather than <socket/> for testing, since if the server was stopped, the socket
1639       might still be in use for some moments. We test the URL with the http condition since it's likelier to
1640       fail sooner if the server has indeed been stopped. -->
1641  <target name="check-tomcat-running">
1642    <condition property="tomcat.isrunning">
1643      <!--<http url="http://${tomcat.server}:${tomcat.port}${app.path}"/>-->
1644      <http url="http://${tomcat.server}:${tomcat.port}"/>
1645    </condition>
1646  </target>
1647 
1648  <!-- Need a copy of the check-tomcat-running target with a distinct property, because ant restart runs
1649       both stop and start, both of which need to do tomcat checks. Each property can be set only once during
1650       an invocation with ant. So ant restart will need two properties to store each of the tomcat checks -->
1651  <target name="check-tomcat-started">
1652    <condition property="tomcat.isstarted">
1653      <http url="http://${tomcat.server}:${tomcat.port}"/>
1654    </condition>
1655  </target>
1656
1657
1658
1659  <!-- stop-tomcat checks if the tomcat server is already running. If it appears to be running
1660       (regardless of whether tomcat was just starting to shut down), this target calls force-stop-tomcat
1661       to issue the shutdown command to tomcat. Then it waits for at most 15 seconds for the server to
1662       actually stop by checking the socket at which tomcat listens every second, printing a warning
1663       at the end of the max wait time of 15 seconds if tomcat was still running. -->
1664  <target name="stop-tomcat" description="Shutdown only Tomcat if running" depends="check-tomcat-running" if="tomcat.isrunning">
1665     <antcall target="force-stop-tomcat"/>
1666
1667     <property name="wait.numchecks" value="15"/>
1668     <echo>Waiting for the server to shutdown... (${wait.numchecks} seconds max)</echo>
1669     <waitfor maxwait="${wait.numchecks}" maxwaitunit="second" checkevery="1" checkeveryunit="second" timeoutproperty="tomcat.timedout">
1670       <not><socket server="${tomcat.server}" port="${tomcat.port}"/></not>
1671     </waitfor>
1672     
1673     <if>
1674       <bool>
1675     <isset property="${tomcat.timedout}"/>
1676       </bool>
1677       <property name="tomcat.isrunning" value="true"/>
1678       <echo>WARNING: Checked the socket ${wait.numchecks} times, but port ${tomcat.port} is still busy.</echo>
1679       <else>
1680     <echo>Tomcat is stopped.</echo>
1681     <property name="tomcat.isrunning" value="false"/>
1682       </else>
1683     </if>
1684  </target>
1685
1686  <target name="restart-tomcat" description="Shutdown and restart only Tomcat" depends="init,stop-tomcat,force-start-tomcat"/>
1687
1688  <target name="setup-catalina-ant-tasks">
1689    <!-- Configure the custom Ant tasks for the Tomcat Manager application -->
1690    <taskdef name="deploy"    classname="org.apache.catalina.ant.DeployTask"
1691      classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
1692    <taskdef name="list"      classname="org.apache.catalina.ant.ListTask"
1693      classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
1694    <taskdef name="reload"    classname="org.apache.catalina.ant.ReloadTask"
1695      classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
1696    <taskdef name="resources" classname="org.apache.catalina.ant.ResourcesTask"
1697      classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
1698    <taskdef name="roles"     classname="org.apache.catalina.ant.RolesTask"
1699      classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
1700    <taskdef name="start"     classname="org.apache.catalina.ant.StartTask"
1701      classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
1702    <taskdef name="stop"      classname="org.apache.catalina.ant.StopTask"
1703      classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
1704    <taskdef name="undeploy"  classname="org.apache.catalina.ant.UndeployTask"
1705      classpath="${catalina.home}/server/lib/catalina-ant.jar"/>
1706  </target>
1707
1708  <!-- http://blog.andrewbeacock.com/2007/11/how-to-truncate-log-file-using-ubuntu.html
1709    Doing "cat </dev/null > packages/tomcat/logs/catalina.out" doesn't work as an ant target.
1710    It seems to have a problem with cat or </dev/null, with or without the < sign. -->
1711  <target name="reset-logs" description="Empties catalina.out, greenstone.log and contents of web/logs/tmp">
1712    <echo>Truncating catalina.out, solr.log, greenstone.log and server.log, and emptying ${web.writablehome}/logs/tmp</echo>   
1713    <exec executable="rm" os="${os.unix}" dir="${catalina.home}/logs" spawn="false">
1714      <arg value="-f"/>
1715      <arg value="catalina.out"/>
1716    </exec>
1717    <exec executable="rm" os="${os.unix}" dir="${web.writablehome}/logs" spawn="false">
1718      <arg value="-f"/>
1719      <arg value="greenstone.log"/>
1720    </exec>
1721    <exec executable="rm" os="${os.unix}" dir="${web.writablehome}/logs" spawn="false">
1722      <arg value="-f"/>
1723      <arg value="server.log"/>
1724    </exec>
1725
1726    <exec executable="touch" os="${os.unix}" dir="${catalina.home}/logs"
1727    spawn="false">
1728      <arg value="catalina.out"/>
1729    </exec>
1730    <exec executable="touch" os="${os.unix}" dir="${web.writablehome}/logs"
1731      spawn="false">
1732      <arg value="greenstone.log"/>
1733    </exec>
1734    <exec executable="touch" os="${os.unix}" dir="${web.writablehome}/logs"
1735      spawn="false">
1736      <arg value="server.log"/>
1737    </exec>
1738
1739    <exec executable="cmd" osfamily="windows" dir="${catalina.home}/logs" spawn="false">
1740      <arg line="/c echo. > catalina.out"/>
1741    </exec>
1742    <exec executable="cmd" osfamily="windows" dir="${web.writablehome}/logs" spawn="false">
1743      <arg line="/c echo. > greenstone.log"/>
1744    </exec>
1745    <exec executable="cmd" osfamily="windows" dir="${web.writablehome}/logs" spawn="false">
1746      <arg line="/c echo. > server.log"/>
1747    </exec>
1748
1749    <!-- if ext/solr/logs/solr.log exists, truncate it -->
1750    <if><bool><available file="${solr-ext.home}/logs/solr.log" type="file"/></bool>     
1751        <exec executable="rm" os="${os.unix}" dir="${solr-ext.home}/logs" spawn="false">
1752          <arg value="-f"/>
1753          <arg value="solr.log"/>
1754        </exec>
1755        <exec executable="touch" os="${os.unix}" dir="${solr-ext.home}/logs" spawn="false">
1756          <arg value="solr.log"/>
1757        </exec>   
1758        <exec executable="cmd" osfamily="windows" dir="${solr-ext.home}/logs" spawn="false">
1759          <arg line="/c echo. > solr.log"/>
1760        </exec>
1761    </if>
1762   
1763    <if>
1764      <bool><available file="${web.writablehome}/logs/tmp" type="dir"/></bool>
1765      <delete>
1766    <fileset dir="${web.writablehome}/logs/tmp" includes="**/*"/>
1767      </delete>
1768    </if>
1769  </target>
1770
1771  <target name="clear-tomcat-sessions" description="Clear the Tomcat Session info." depends="init">
1772    <exec executable="cmd" osfamily="windows" dir="${catalina.home}/work/Catalina/localhost/greenstone3" spawn="false">
1773      <arg line="/c echo. > SESSIONS.ser"/>
1774    </exec>
1775    <exec executable="rm" os="${os.unix}" dir="${catalina.home}/work/Catalina/localhost/greenstone3" spawn="false">
1776      <arg value="-f"/>
1777      <arg value="SESSIONS.ser"/>
1778    </exec>
1779
1780  </target>
1781  <!-- ======================= ant Targets ============================ -->
1782  <target name="prepare-ant" depends="init">
1783    <if>
1784      <bool>
1785        <not><available file="${packages.home}/ant/.flagfile"/></not>
1786      </bool>
1787
1788      <get src="http://www.greenstone.org/gs3files/apache-ant-1.7.0-bin.zip"
1789        dest="${packages.home}/apache-ant-1.7.0-bin.zip"
1790        usetimestamp="true"/>
1791      <unzip src="${packages.home}/apache-ant-1.7.0-bin.zip"
1792        dest="${packages.home}"/>
1793      <move todir="${packages.home}/ant">
1794        <fileset dir="${packages.home}/apache-ant-1.7.0"/>
1795      </move>
1796      <echo file="${packages.home}/ant/.flagfile">
1797        the timestamp of this file is the time that ant was extracted from the zip files.
1798        it is used to figure out whether the files need to be refreshed or not in `ant prepare-ant`
1799      </echo>
1800
1801      <else>
1802        <echo>Ant has been prepared, will not prepare</echo>
1803        <echo>Delete ${packages.home}/ant/.flagfile to force refresh</echo>
1804      </else>
1805
1806    </if>
1807  </target>
1808
1809  <!-- ======================= Admin Targets ============================ --> 
1810
1811  <!-- This target won't work with Eclipse because the SecureInputHandler used below conflicts with it.
1812    See http://www.dcepler.net/post.cfm/hiding-password-input-in-ant
1813    But you can do: echo mypassword | ant config-admin -->
1814  <target name="config-admin" description="Reset admin password">
1815    <input addproperty="admin.password" defaultvalue="admin" message="New admin password (3-8 characters):&gt;">
1816      <handler classname="org.apache.tools.ant.input.SecureInputHandler" /> <!-- password won't be visible on screen -->
1817    </input>
1818    <!--<echo>PWD: ${admin.password}</echo>-->
1819    <antcall target="update-userdb">
1820      <param name="user.username" value="admin"/>
1821      <param name="user.password" value="${admin.password}"/>
1822      <param name="user.groups" value=""/>
1823      <param name="user.status" value=""/>
1824      <param name="user.comment" value="Password updated."/>
1825      <param name="user.email" value=""/>
1826    </antcall>
1827  </target>
1828
1829  <target name="config-user" description="Add or modify users" depends="get-user-data,update-userdb"/>
1830
1831  <target name="get-user-data" description="Get user details">
1832    <input addproperty="user.username" message="Username:&gt;"/>
1833    <input addproperty="user.password" defaultvalue="" message="Password (3-8 characters):&gt;">
1834      <handler classname="org.apache.tools.ant.input.SecureInputHandler" /> <!-- password won't be visible on screen -->
1835    </input>
1836    <input addproperty="user.groups" defaultvalue="" message="Groups (comma-separated list):&gt;"/>
1837    <input addproperty="user.status" defaultvalue="true" message="Enabled (true/false):&gt;"/>
1838    <input addproperty="user.comment" defaultvalue="" message="Comment:&gt;"/>
1839    <input addproperty="user.email" defaultvalue="" message="Email:&gt;"/>
1840  </target>
1841
1842<!-- This target won't work with Eclipse because the SecureInputHandler used below conflicts with it.
1843    See http://www.dcepler.net/post.cfm/hiding-password-input-in-ant
1844    But you can do: echo mypassword | ant config-admin -->
1845  <target name="update-userdb" description="Add or modify users" depends="check-tomcat-running">
1846
1847    <!--
1848       We're now using derby networked server, so stopping and starting tomcat is not necessary.
1849       For embedded derby: stop tomcat if running, since derby db is embedded
1850       and only allows connections from one jvm instance at a time
1851     See http://db.apache.org/derby/papers/DerbyTut/embedded_intro.html
1852     The ${tomcat.isrunning} property is set by the depends-target "check-tomcat-running" -->
1853    <!--
1854    <if>
1855      <bool>
1856    <istrue value="${tomcat.isrunning}"/>
1857      </bool>
1858      <antcall target="stop-tomcat"/>
1859    </if>
1860    -->
1861
1862    <!--<echo>${admin.password}</echo>--> <!-- for testing -->
1863    <java classname="org.greenstone.gsdl3.util.ModifyUsersDB">
1864      <classpath refid="compile.classpath"/> <!--for ${web.lib}/gsdl3.jar and supporting files-->
1865      <arg file="${web.home}/etc/usersDB"/>
1866      <arg value="${user.username}"/>
1867      <arg value="password=${user.password}"/>
1868      <arg value="groups=${user.groups}"/>
1869      <arg value="status=${user.status}"/>
1870      <arg value="comment=${user.comment}"/>
1871      <arg value="email=${user.email}"/>
1872    </java>
1873   
1874    <!-- run tomcat again if it used to be running -->
1875    <!--
1876    <if>
1877      <bool>
1878    <istrue value="${tomcat.isrunning}"/>
1879    </bool>
1880      <antcall target="force-start-tomcat"/>
1881    </if>
1882    -->
1883  </target>
1884
1885
1886  <!-- ======================= Axis Targets ============================ --> 
1887 
1888  <target name="prepare-axis" depends="init">
1889
1890    <if>
1891      <bool>
1892        <not><available file="${packages.home}/axis/.flagfile"/></not>
1893      </bool>
1894
1895      <get src="http://www.greenstone.org/gs3files/${axis.zip.version}"
1896        dest="${packages.home}/${axis.zip.version}"
1897        usetimestamp="true"/>
1898      <unzip src="${packages.home}/${axis.zip.version}"
1899        dest="${packages.home}"/>
1900      <move todir="${packages.home}/axis">
1901        <fileset dir="${packages.home}/${axis.dir.version}"/>
1902      </move>
1903      <!-- install axis into greenstone web app -->
1904      <copy todir="${web.lib}">
1905        <fileset dir="${packages.home}/axis/webapps/axis/WEB-INF/lib">
1906          <include name="*.jar"/>
1907        </fileset>
1908      </copy>
1909      <copy todir="${web.home}">
1910        <fileset dir="${packages.home}/axis/webapps/axis/">
1911          <include name="*.jsp"/>
1912          <include name="*.jws"/>
1913        </fileset>
1914      </copy>
1915      <copy tofile="${web.home}/axis.html" file="${packages.home}/axis/webapps/axis/index.html"/>
1916      <copy todir="${web.classes}">
1917        <fileset dir="${packages.home}/axis/webapps/axis/WEB-INF/classes">
1918          <include name="*.properties"/>
1919        </fileset>
1920      </copy>
1921      <echo file="${packages.home}/axis/.flagfile">
1922        the timestamp of this file is the time that axis was extracted from the zip files.
1923        it is used to figure out whether the files need to be refreshed or not in `ant prepare-axis`
1924      </echo>
1925
1926      <else>
1927        <echo>Axis has been prepared, will not prepare</echo>
1928        <echo>Delete ${packages.home}/axis/.flagfile to force refresh</echo>
1929      </else>
1930
1931    </if>
1932  </target>
1933
1934  <target name="soap-deploy-site" depends="init,get-sitename,get-siteuri,get-webservices,create-deployment-files,deploy-site"
1935    description="Deploy a SOAP web service for a local Greenstone site. Tomcat must be running for this to work."/>
1936   
1937    <target name="deploy-site">
1938    <java classname="org.apache.axis.client.AdminClient">
1939      <classpath refid="compile.classpath"/>
1940      <arg value="-l"/>
1941      <arg value="http://${tomcat.server}:${tomcat.port}${app.path}/servlet/AxisServlet"/>
1942      <arg file="${basedir}/resources/soap/deploy.wsdd"/>
1943    </java>
1944    <delete file="${basedir}/resources/soap/deploy.wsdd"/> <!--clean up, no longer used-->
1945  </target>
1946 
1947  <target name="soap-undeploy-site" depends="get-undeploy-service-name"
1948    description="Undeploy a SOAP web service for a local Greenstone site. Tomcat must be running for this to work.">
1949    <filter token="servicesname" value="${axis.undeploy.servicename}"/>
1950    <copy file="${basedir}/resources/soap/undeploy-site.wsdd.template"
1951      tofile="${basedir}/resources/soap/undeploy.wsdd"
1952      filtering="true"
1953      overwrite="true"/>
1954    <java classname="org.apache.axis.client.AdminClient">
1955      <classpath refid="compile.classpath"/>
1956      <arg value="-l"/>
1957      <arg value="http://${tomcat.server}:${tomcat.port}${app.path}/servlet/AxisServlet"/>
1958      <arg file="${basedir}/resources/soap/undeploy.wsdd"/>
1959    </java>
1960    <delete file="${basedir}/resources/soap/undeploy.wsdd"/> <!--clean up, no longer used-->
1961  </target> 
1962
1963  <!-- this target used to deploy the default web service SOAPServer (base.webservice.name) on the localsite server
1964  with the default servicename of localsite-->
1965  <target name="deploy-localsite" depends="init"
1966    description="Deploy the SOAP server for localsite. Will start and stop Tomcat.">
1967    <antcall target="force-start-tomcat"/>
1968    <echo>Deploying ${base.webservice.name} web services for localsite under service name: localsite</echo>
1969    <antcall target="create-deployment-files">
1970      <param name="axis.sitename" value="localsite"/>
1971      <param name="axis.servicesname" value="${base.webservice.name}"/>
1972      <param name="axis.siteuri" value="localsite"/>
1973    </antcall>
1974    <antcall target="deploy-site">
1975      <param name="axis.sitename" value="localsite"/>
1976      <param name="axis.servicesname" value="${base.webservice.name}"/>
1977      <param name="axis.siteuri" value="localsite"/>
1978    </antcall>
1979    <echo>The Greenstone server has been started up. If you do not want it running, please type: ant stop.</echo>
1980  </target>
1981   
1982  <target name="get-sitename" unless="axis.sitename">
1983    <input addproperty="axis.sitename" defaultvalue="localsite">What site do you want to deploy services for?
1984Press Enter for default:localsite</input>
1985  </target>
1986
1987  <target name="get-undeploy-service-name" unless="axis.undeploy.servicename">
1988    <input addproperty="axis.undeploy.servicename" defaultvalue="localsite">Please enter the full name of the service you wish to undeploy.
1989To find out which web services you've got deployed, point your browser to http://HOST:PORT/greenstone3/services
1990Or press Enter for undeploying the default:localsite /&gt;</input>
1991     <echo>Name of service to undeploy: ${axis.undeploy.servicename}</echo>
1992  </target>
1993
1994  <target name="get-webservices" unless="axis.servicesname">
1995    <input addproperty="axis.servicesname" defaultvalue="${base.webservice.name}">Which set of web services do you want to deploy?
1996Choose from: ${web.services.list}
1997Or press Enter for default:${base.webservice.name} /&gt;</input>
1998    <echo>${axis.servicesname}</echo>
1999  </target>
2000
2001  <target name="get-siteuri" depends="get-sitename,get-webservices" unless="axis.siteuri">
2002    <input addproperty="axis.siteuri" defaultvalue="${axis.servicesname}${axis.sitename}">What name do you want the service to have? (Press Enter for default:${axis.servicesname}${axis.sitename})</input>
2003    <echo>Site: ${axis.sitename}, services: ${axis.servicesname}, servicesname: ${axis.siteuri}</echo>
2004  </target>
2005
2006  <target name="set-soapmethod" description="Determines whether the service in the wsdd should have the style attribute set to message or the provider attribute set to java:RPC"  if="axis.servicesname">
2007   <condition property="soap.method" value="provider='java:MSG' style='message' use='literal'">
2008      <equals arg1="${axis.servicesname}" arg2="${base.webservice.name}"/>
2009    </condition>
2010   
2011   <!--everything else defaults to java:RPC at present-->
2012   <condition property="soap.method" value="provider='java:RPC'">
2013     <not>
2014      <equals arg1="${axis.servicesname}" arg2="${base.webservice.name}"/>
2015    </not>
2016    </condition>
2017  </target>
2018   
2019  <target name="create-deployment-files" depends="set-soapmethod" if="axis.sitename">
2020    <filter token="sitename" value="${axis.sitename}"/>
2021    <filter token="siteuri" value="${axis.siteuri}"/>
2022    <filter token="servicesname" value="${axis.servicesname}"/>
2023    <filter token="soapmethod" value="${soap.method}"/>
2024    <copy file="${basedir}/resources/soap/site.wsdd.template"
2025      tofile="${basedir}/resources/soap/deploy.wsdd"
2026      filtering="true"
2027      overwrite="true"/>
2028    <!-- create the java files and compile them -->
2029    <copy file="${basedir}/resources/java/${axis.servicesname}.java.in"
2030      tofile="${src.gsdl3.home}/${axis.servicesname}${axis.sitename}.java"
2031      filtering="true"
2032      overwrite="true"/>
2033    <mkdir dir="${build.home}"/>
2034    <javac srcdir="${src.home}"
2035      destdir="${build.home}"
2036      includeantruntime="${compile.includeantruntime}"
2037      debug="${compile.debug}"
2038      deprecation="${compile.deprecation}"
2039      optimize="${compile.optimize}"
2040      encoding="${compile.encoding}">
2041      <classpath refid="compile.classpath"/>
2042      <include name="org/greenstone/gsdl3/${axis.servicesname}${axis.sitename}.java" />
2043    </javac>
2044    <mkdir dir="${web.classes}/org/greenstone/gsdl3"/>
2045    <copy file="${build.home}/org/greenstone/gsdl3/${axis.servicesname}${axis.sitename}.class"
2046      tofile="${web.classes}/org/greenstone/gsdl3/${axis.servicesname}${axis.sitename}.class"
2047      overwrite="true" />
2048  </target>
2049 
2050
2051  <!-- ====================== Core targets ============================== -->
2052  <!-- core targets refer to the core gsdl3 java src -->
2053 
2054  <target name="prepare-core"/>
2055 
2056  <target name="configure-core"/>
2057
2058  <target name="update-core" depends="init,svnupdate-core,clean-core,compile-core"
2059    description="Update only the Greenstone core" />
2060 
2061  <target name="svnupdate-core" unless="nosvn.mode">
2062    <exec executable="svn">
2063      <arg value="update"/>
2064      <arg value="${basedir}"/>
2065      <arg value="-r"/><arg value="${branch.revision}"/>
2066    </exec>
2067  </target>
2068
2069  <target name="clean-core"
2070    description="Clean only the Greenstone core">
2071    <!-- should this delete the gsdl3.jar from web/WEB-INF?? -->
2072    <delete dir="${build.home}"/>
2073  </target>
2074
2075  <target name="compile-core" depends="init"
2076    description="Compile only the Greenstone core">
2077    <mkdir dir="${build.home}"/>
2078   
2079    <if><bool><isset property="with.jni"/></bool>
2080    <javac srcdir="${src.home}"
2081           destdir="${build.home}"
2082           includeantruntime="${compile.includeantruntime}"
2083           debug="${compile.debug}"
2084           deprecation="${compile.deprecation}"
2085           optimize="${compile.optimize}"
2086           encoding="${compile.encoding}">
2087      <classpath>
2088            <path refid="compile.classpath"/>
2089      </classpath>
2090    </javac>
2091    <else>
2092      <property name="gsprefix" value=""/>   
2093      <javac srcdir="${src.home}"
2094         destdir="${build.home}"
2095         includeantruntime="${compile.includeantruntime}"
2096         debug="${compile.debug}"
2097         deprecation="${compile.deprecation}"
2098         optimize="${compile.optimize}"
2099         encoding="${compile.encoding}">
2100        <classpath>
2101              <path refid="compile.classpath"/>
2102        </classpath>
2103        <exclude name="org/greenstone/gsdl3/service/GS2MGPPRetrieve.java"/>
2104        <exclude name="org/greenstone/gsdl3/service/GS2MGPPSearch.java"/>
2105        <exclude name="org/greenstone/gsdl3/service/GS2MGSearch.java"/>
2106        <exclude name="org/greenstone/gsdl3/service/GS2MGRetrieve.java"/>
2107        <exclude name="org/greenstone/gsdl3/service/GoogleNgramMGPPSearch.java"/>
2108        <exclude name="org/greenstone/gsdl3/service/PhindPhraseBrowse.java"/>
2109        <exclude name="org/greenstone/gsdl3/util/GDBMWrapper.java"/>
2110      </javac>
2111    </else>
2112    </if>
2113    <jar destfile="${build.home}/gsdl3.jar">
2114      <fileset dir="${build.home}">
2115        <include name="org/greenstone/gsdl3/**"/>
2116        <include name="org/flax/**"/>
2117        <exclude name="**/Test.class"/>
2118      </fileset>
2119      <manifest>
2120        <attribute name="Built-By" value="${user.name}" />
2121      </manifest>
2122    </jar>
2123    <copy file="${build.home}/gsdl3.jar" todir="${web.lib}"/>
2124
2125    <jar destfile="${build.home}/gutil.jar">
2126      <fileset dir="${build.home}">
2127        <include name="org/greenstone/util/**"/>
2128      </fileset>
2129      <manifest>
2130        <attribute name="Built-By" value="${user.name}" />
2131      </manifest>
2132    </jar>
2133    <copy file="${build.home}/gutil.jar" todir="${web.lib}"/>
2134
2135    <!-- copy the localsite server in case we need it -->
2136    <copy file="${build.home}/org/greenstone/gsdl3/${base.webservice.name}localsite.class" tofile="${web.classes}/org/greenstone/gsdl3/${base.webservice.name}localsite.class" />
2137
2138    <!-- Greenstone Administrator Interface -->
2139    <jar destfile="${build.home}/GAI.jar">
2140      <fileset dir="${build.home}">
2141        <include name="org/greenstone/admin/**"/>
2142      </fileset>
2143      <manifest>
2144        <attribute name="Built-By" value="${user.name}" />
2145      </manifest>
2146    </jar>
2147    <copy file="${build.home}/GAI.jar" todir="${web.lib}"/>
2148    <copy file="${build.home}/GAI.jar" todir="${admin.dir}"/>
2149    <jar destfile="${build.home}/phind.jar">
2150      <fileset dir="${build.home}">
2151        <include name="org/greenstone/applet/phind/**"/>
2152      </fileset>
2153      <manifest>
2154        <attribute name="Built-By" value="${user.name}" />
2155      </manifest>
2156    </jar>
2157    <mkdir dir="${web.applet}"/>
2158    <copy file="${build.home}/phind.jar" todir="${web.applet}"/>
2159    <!-- phind also needs xercesImpl.jar and xml-apis.jar to be in web/applet -->
2160    <if>
2161      <bool><istrue value="${tomcat.islocal}"/></bool>
2162      <if><bool><available file="${catalina.home}/lib/xercesImpl.jar"/></bool><!-- moved for solr -->
2163    <copy file="${catalina.home}/lib/xercesImpl.jar" todir="${web.applet}"/>
2164    <copy file="${catalina.home}/lib/xml-apis.jar" todir="${web.applet}"/>
2165   
2166    <else><!-- get from default GS3 web lib location-->
2167      <copy file="${web.lib}/xercesImpl.jar" todir="${web.applet}"/>
2168      <copy file="${web.lib}/xml-apis.jar" todir="${web.applet}"/>
2169    </else>
2170      </if>
2171    </if>
2172
2173
2174    <!-- skip anttasks for now
2175    <jar destfile="${build.home}/anttasks.jar">
2176      <fileset dir="${build.home}">
2177        <include name="org/greenstone/anttasks/**"/>
2178      </fileset>
2179      <manifest>
2180        <attribute name="Built-By" value="${user.name}" />
2181      </manifest>
2182    </jar>
2183    <copy file="${build.home}/anttasks.jar" todir="${basedir}/lib/java"/>-->
2184    <jar destfile="${build.home}/gsdl3test.jar">
2185      <fileset dir="${build.home}">
2186        <include name="org/greenstone/gsdl3/**/*Test.class"/>
2187        <include name="org/greenstone/testing/**"/>
2188      </fileset>
2189      <manifest>
2190        <attribute name="Built-By" value="${user.name}" />
2191      </manifest>
2192    </jar>
2193    <jar destfile="${build.home}/server.jar">
2194      <fileset dir="${build.home}">
2195        <include name="org/greenstone/server/**"/>
2196        <include name="org/greenstone/util/**"/>
2197      </fileset>
2198      <fileset file="${basedir}/resources/java/server.properties"/>
2199      <manifest>
2200        <attribute name="Built-By" value="${user.name}"/>
2201      </manifest>
2202    </jar>
2203    <copy file="${build.home}/server.jar" todir="${basedir}"/>
2204  </target>
2205
2206  <!-- === Eclipse targets == -->
2207  <target name="setup-for-eclipse">
2208
2209    <filter token="gsdlhome" value="${gs2build.home}"/>
2210    <filter token="gsdl3srchome" value="${basedir}"/>
2211    <filter token="gsdl3home" value="${basedir}/web"/>
2212
2213    <if>
2214      <bool><not><available file="${basedir}/TransformingLibrary.launch"/></not></bool>         
2215      <copy file="${basedir}/TransformingLibrary.launch.in" tofile="${basedir}/TransformingLibrary.launch" filtering="true" overwrite="true"/>
2216    </if>
2217<!--
2218    <if>
2219      <bool><not><available file="${basedir}/LibraryCommandline.launch"/></not></bool>         
2220      <copy file="${basedir}/LibraryCommandline.launch.in" tofile="${basedir}/LibraryCommandline.launch" filtering="true" overwrite="true"/>
2221    </if>
2222-->
2223  </target>
2224 
2225  <!-- ================== Packages targets ================================ -->
2226  <!-- these targets refer to the greenstone source packages - these need
2227  updating less often, so are in  separate targets to the core -->
2228  <target name="prepare-packages" depends="init"/>
2229 
2230  <target name="update-packages" depends="init,svnupdate-packages,configure-packages,clean-packages,compile-packages"
2231    description="Update only the source packages"/>
2232
2233  <target name="svnupdate-packages" unless="nosvn.mode">
2234    <exec executable="svn">
2235      <arg value="update"/>
2236      <arg value="${src.packages.home}"/>
2237      <arg value="-r"/><arg value="${branch.revision}"/>
2238    </exec>
2239  </target>
2240
2241 
2242  <target name="configure-packages" depends="init,configure-javagdbm"
2243    description="Configure only the packages."/>
2244 
2245  <target name="configure-javagdbm" if="with.jni">
2246    <echo>
2247      Configuring JavaGDBM
2248    </echo>
2249   
2250    <exec executable="${javagdbm.home}/configure" os="${os.unix}" dir="${javagdbm.home}" failonerror="true">
2251      <arg value="--prefix=${basedir}"/>
2252      <arg value="--libdir=${lib.jni}"/>
2253      <arg value="--with-gdbm=${gdbm.home}"/>
2254      <arg line="${cross.configure.args}"/>
2255    </exec>   
2256  </target>
2257
2258  <target name="clean-packages" depends="init,clean-javagdbm" description="Clean only the packages"/>
2259
2260  <target name="clean-javagdbm" depends="init">
2261    <if><bool><available file="${javagdbm.home}/Makefile"/></bool>
2262    <exec executable="make" os="${os.unix}"
2263      dir="${javagdbm.home}" failonerror="true">
2264      <arg value="clean"/>
2265    </exec>
2266    </if>
2267  </target>
2268 
2269  <target name="distclean-packages" depends="init,distclean-javagdbm" description="Distclean only the packages"/>
2270
2271  <target name="distclean-javagdbm" depends="init">
2272    <if><bool><available file="${javagdbm.home}/Makefile"/></bool>
2273    <exec executable="make" os="${os.unix}"
2274      dir="${javagdbm.home}" failonerror="true">
2275      <arg value="distclean"/>
2276    </exec>
2277    </if>
2278  </target>
2279 
2280  <target name="compile-packages" description="Compile only the source packages">
2281    <!-- javagdbm -->
2282    <antcall target="compile-javagdbm"/>
2283    <!-- Search4j -->
2284    <antcall target="compile-search4j"/>
2285  </target>
2286
2287  <target name="compile-javagdbm" description="Compile JavaGDBM" if="with.jni">
2288   
2289    <!-- unix: -->
2290    <echo>compile javagdbm</echo>
2291    <exec executable="make" os="${os.unix}" dir="${javagdbm.home}" failonerror="true">
2292      <arg value="JAVACOPTIONS=-encoding UTF8"/>
2293    </exec>
2294    <exec executable="make" os="${os.unix}" dir="${javagdbm.home}" failonerror="true">
2295      <arg value="install"/>
2296    </exec>
2297
2298    <!-- windows: Calling without the "compile" argument first will run winMake.bat with
2299         "all" which will then perform both the compile AND link targets in jni/win32.mak
2300         (thereby also generating gdbmjava.dll). Then we run the same command with
2301         the "install" argument to copy the gdbmjava.dll into the correct location. -->
2302    <echo>Windows: compile javagdbm</echo>
2303    <exec executable="${javagdbm.home}/winMake.bat" osfamily="windows" dir="${javagdbm.home}" failonerror="true">     
2304      <env key="GSDL3SRCHOME" path="${basedir}"/>
2305    </exec>
2306    <exec executable="${javagdbm.home}/winMake.bat" osfamily="windows" dir="${javagdbm.home}" failonerror="true">
2307      <env key="GSDL3SRCHOME" path="${basedir}"/>
2308      <arg value="install"/>
2309    </exec>
2310
2311    <!-- install the jar file -->
2312    <echo>Install the javagdbm jar file ${javagdbm.home}/javagdbm.jar ${lib.jni}</echo>
2313    <copy file="${javagdbm.home}/javagdbm.jar" todir="${lib.jni}"/>
2314  </target>
2315
2316  <target name="compile-search4j">
2317
2318    <!-- windows -->
2319    <if><bool><istrue value="${current.os.iswindows}"/></bool>
2320      <exec executable="nmake" dir="${src.packages.home}/search4j" failonerror="true">
2321        <arg value="/f"/>
2322        <arg value="win32.mak"/>
2323        <arg value='BINDIR="${basedir}\bin"'/>
2324      </exec>
2325      <exec executable="nmake" dir="${src.packages.home}/search4j" failonerror="true">
2326        <arg value="/f"/>
2327        <arg value="win32.mak"/>
2328        <arg value="install"/>
2329        <arg value='BINDIR="${basedir}\bin"'/>
2330      </exec>
2331
2332    <!-- unix -->
2333    <else><if><bool><istrue value="${current.os.isunix}"/></bool>
2334      <exec executable="${src.packages.home}/search4j/configure" dir="${src.packages.home}/search4j" failonerror="true">
2335        <arg value="--bindir=${basedir}/bin"/>
2336        <arg value="${static.arg}"/>
2337        <arg line="${cross.configure.args}"/>
2338      </exec>
2339      <exec executable="make" dir="${src.packages.home}/search4j" failonerror="true"/>
2340      <exec executable="make" dir="${src.packages.home}/search4j" failonerror="true">
2341        <arg value="install"/>
2342      </exec>
2343
2344    <!-- else warn -->
2345    <else>
2346      <fail>this target does not support the current os</fail>
2347
2348    </else></if></else></if>
2349
2350  </target>
2351
2352  <target name="install-auxiliary-jar-files" depends="init">
2353
2354    <if>
2355      <bool><available file="${mg.home}/mg.jar"/></bool>
2356      <copy file="${mg.home}/mg.jar" todir="${lib.jni}"/>
2357    </if>
2358
2359    <if>
2360      <bool><available file="${mgpp.home}/mgpp.jar"/></bool>
2361      <copy file="${mgpp.home}/mgpp.jar" todir="${lib.jni}"/>
2362    </if>
2363
2364    <copy file="${lucene.home}/LuceneWrapper4.jar" todir="${web.lib}"/>   
2365  </target>
2366 
2367  <target name="install-jni-files" depends="init" if="with.jni">
2368    <antcall target="install-jni-files-linux"/>
2369    <antcall target="install-jni-files-windows"/>
2370    <antcall target="install-jni-files-macos"/>
2371  </target>
2372
2373  <target name="install-jni-files-linux" depends="init" if="current.os.isunixnotmac">
2374
2375    <if>
2376
2377      <bool><equals arg1="${os.bin.dir}" arg2="windows"/></bool>
2378      <!-- cross compiling to windows -->
2379      <copy file="${mg.home}/jni/mgretrievejni.dll" todir="${lib.jni}"/>
2380      <copy file="${mg.home}/jni/mgsearchjni.dll" todir="${lib.jni}"/>
2381      <copy file="${mg.home}/jni/mgpassjni.dll" todir="${lib.jni}"/>
2382      <copy file="${mgpp.home}/jni/mgppretrievejni.dll" todir="${lib.jni}"/>
2383      <copy file="${mgpp.home}/jni/mgppsearchjni.dll" todir="${lib.jni}"/>
2384      <copy file="${mgpp.home}/jni/mgpppassjni.dll" todir="${lib.jni}"/>
2385     
2386      <else>
2387    <!-- otherwise do the usual Unix copies -->
2388    <copy file="${mg.home}/jni/libmgretrievejni.so" todir="${lib.jni}"/>
2389    <copy file="${mg.home}/jni/libmgsearchjni.so" todir="${lib.jni}"/>
2390    <copy file="${mg.home}/jni/libmgpassjni.so" todir="${lib.jni}"/>
2391    <copy file="${mgpp.home}/jni/libmgppretrievejni.so" todir="${lib.jni}"/>
2392    <copy file="${mgpp.home}/jni/libmgppsearchjni.so" todir="${lib.jni}"/>
2393    <copy file="${mgpp.home}/jni/libmgpppassjni.so" todir="${lib.jni}"/>
2394      </else>
2395    </if>
2396
2397
2398  </target>
2399  <target name="install-jni-files-windows" depends="init" if="current.os.iswindows">
2400    <copy file="${mg.home}/jni/mgretrievejni.dll" todir="${lib.jni}"/>
2401    <copy file="${mg.home}/jni/mgsearchjni.dll" todir="${lib.jni}"/>
2402    <copy file="${mg.home}/jni/mgpassjni.dll" todir="${lib.jni}"/>
2403    <copy file="${mgpp.home}/jni/mgppretrievejni.dll" todir="${lib.jni}"/>
2404    <copy file="${mgpp.home}/jni/mgppsearchjni.dll" todir="${lib.jni}"/>
2405    <copy file="${mgpp.home}/jni/mgpppassjni.dll" todir="${lib.jni}"/>
2406  </target>
2407  <target name="install-jni-files-macos" depends="init" if="current.os.ismac">
2408    <copy file="${mg.home}/jni/libmgretrievejni.jnilib" todir="${lib.jni}"/>
2409    <copy file="${mg.home}/jni/libmgsearchjni.jnilib" todir="${lib.jni}"/>
2410    <copy file="${mg.home}/jni/libmgpassjni.jnilib" todir="${lib.jni}"/>
2411    <copy file="${mgpp.home}/jni/libmgppretrievejni.jnilib" todir="${lib.jni}"/>
2412    <copy file="${mgpp.home}/jni/libmgppsearchjni.jnilib" todir="${lib.jni}"/>
2413    <copy file="${mgpp.home}/jni/libmgpppassjni.jnilib" todir="${lib.jni}"/>
2414  </target>
2415 
2416  <!-- ========common-src targets =================================-->
2417  <!-- these are used to get common-src (for indexers, gdbm, sqlite etc) when
2418  collection building is not enabled -->
2419
2420  <target name="update-common-src" depends="init" if="collection.building.disabled">
2421  </target>
2422
2423  <target name="svnupdate-common-src" depends="init" if="collection.building.disabled" unless="nosvn.mode">
2424    <exec executable="svn">
2425      <arg value="update"/>
2426      <arg value="${common.src.home}"/>
2427      <arg value="-r"/><arg value="${branch.revision}"/>
2428    </exec>
2429  </target>
2430
2431  <target name="prepare-common-src" depends="init" if="collection.building.disabled" unless="common.src.present">
2432    <antcall target="checkout-common-src"/>
2433    <antcall target="unzip-windows-packages"/>
2434  </target>
2435
2436  <target name="checkout-common-src" depends="init" if="collection.building.disabled" unless="nosvn.mode">
2437    <echo>checking out common-src</echo>
2438    <exec executable="svn">
2439      <arg value="checkout"/>
2440      <arg value="${svn.root}/main/${branch.path}/greenstone2/common-src"/>
2441            <arg value="common-src"/>
2442      <arg value="-r"/><arg value="${branch.revision}"/>
2443    </exec>
2444  </target>
2445   
2446  <target name="configure-common-src" depends="init">
2447<!--
2448    <echo>cross configure args: ${cross.configure.args}</echo>
2449-->
2450    <exec executable="${common.src.home}/configure" os="${os.unix}"
2451      dir="${common.src.home}" failonerror="true">
2452      <arg value="--prefix=${gs2build.home}"/> <!-- what value to use?? -->
2453      <arg value="--bindir=${gs2build.home}/bin/${os.bin.dir}"/> <!-- what value to use?? -->
2454      <arg line="${gs2.opt.args}"/>
2455      <arg line="${static.arg}"/>
2456      <arg line="${cross.configure.args}"/>
2457      <arg line="${allargs}"/>
2458    </exec>
2459  </target>
2460
2461  <target name="clean-common-src" depends="init">
2462    <!-- unix:  -->
2463    <if><bool><available file="${common.src.home}/Makefile"/></bool>
2464    <exec executable="make" os="${os.unix}" dir="${common.src.home}" failonerror="true">
2465      <arg value="clean"/>
2466    </exec>
2467    </if>
2468    <!-- windows: -->   
2469    <exec executable="nmake" dir="${common.src.home}" osfamily="windows" failonerror="true">
2470      <arg value="/f"/>
2471      <arg value="win32.mak"/>
2472      <arg value="clean"/>
2473      <arg value="GSDLHOME=${gs2build.home}"/>
2474    </exec>
2475  </target>
2476  <target name="distclean-common-src" depends="init">
2477    <!-- unix:  -->
2478    <if><bool><available file="${common.src.home}/Makefile"/></bool>
2479    <exec executable="make" os="${os.unix}" dir="${common.src.home}" failonerror="true">
2480      <arg value="distclean"/>
2481    </exec>
2482    </if>
2483    <!-- windows: distclean = clean + remove configure products (remove makefiles). But on Windows there is no removing makefiles, so we just call clean -->   
2484    <exec executable="nmake" dir="${common.src.home}" osfamily="windows" failonerror="true">
2485      <arg value="/f"/>
2486      <arg value="win32.mak"/>
2487      <arg value="clean"/>
2488      <arg value="GSDLHOME=${gs2build.home}"/>
2489    </exec>
2490  </target>
2491  <target name="compile-common-src" depends="init">
2492    <!-- unix: -->
2493    <exec executable="make" os="${os.unix}" dir="${common.src.home}" failonerror="true">
2494      <arg value="${gs2.compile.target}"/>
2495    </exec>
2496    <!-- windows: -->
2497    <exec executable="nmake" dir="${common.src.home}" osfamily="windows" failonerror="true">
2498      <arg value="/f"/>
2499      <arg value="win32.mak"/>
2500      <arg value="GSDLHOME=${gs2build.home}"/>
2501      <arg value="ENABLE_JNI=${gs2.windows.enablejni}"/>
2502      <arg value="ENABLE_MG=${gs2.windows.enablemg}"/>
2503      <arg value="ENABLE_MGPP=${gs2.windows.enablemgpp}"/>
2504      <arg value="USE_GDBM=${gs2.windows.usegdbm}"/>
2505      <arg value="USE_SQLITE=${gs2.windows.usesqlite}"/>
2506    </exec>
2507  </target>
2508 
2509  <!-- ======= collection-building targets ===========================-->
2510
2511  <target name="update-collection-building" if="collection.building.enabled"
2512    depends="init,svnupdate-collection-building,gs2build-edit-setup-bat,configure-common-src,clean-common-src,compile-common-src,configure-collection-building,clean-collection-building,compile-collection-building"
2513    description="Update (SVN update, configure, compile etc) only the collection building components"/>
2514
2515  <target name="svnupdate-collection-building" if="collection.building.enabled" depends="init,svnupdate-gs2build,svnupdate-cgi,svnupdate-gli" unless="nosvn.mode"
2516    description="SVN update the collection building components">
2517  </target>
2518
2519  <target name="prepare-collection-building" depends="init,prepare-gs2build,svnupdate-cgi,prepare-gli" if="collection.building.enabled">
2520  </target>
2521
2522  <target name="configure-collection-building" depends="init,configure-build-src" if="collection.building.enabled"
2523    description="Configure the collection building components">
2524  </target>
2525
2526  <target name="clean-collection-building" depends="init,clean-gli,clean-build-src"
2527    description="Clean only the collection building components"
2528    if="collection.building.enabled"/>
2529
2530  <target name="distclean-collection-building" depends="init,clean-build-src,distclean-build-src"
2531    description="Distclean only the collection building components"
2532    if="collection.building.enabled"/>
2533
2534  <target name="compile-collection-building" depends="init,compile-build-src,compile-gli" if="collection.building.enabled"
2535    description="Compile only the collection building components">
2536    <!-- make install for common-src -->
2537    <!-- unix: -->
2538    <exec executable="make" os="${os.unix}" dir="${common.src.home}" failonerror="true">
2539      <arg value="${gs2.install.target}"/>
2540    </exec>
2541     
2542    <!-- windows: -->
2543    <exec executable="nmake" dir="${common.src.home}" osfamily="windows" failonerror="true">
2544      <arg value="/f"/>
2545      <arg value="win32.mak"/>
2546      <arg value="install"/>
2547      <arg value="GSDLHOME=${gs2build.home}"/>
2548      <arg value="ENABLE_JNI=${gs2.windows.enablejni}"/>
2549      <arg value="ENABLE_MG=${gs2.windows.enablemg}"/>
2550      <arg value="ENABLE_MGPP=${gs2.windows.enablemgpp}"/>
2551      <arg value="USE_GDBM=${gs2.windows.usegdbm}"/>
2552      <arg value="USE_SQLITE=${gs2.windows.usesqlite}"/>
2553      <!--
2554      <arg value="ENABLE_JNI=${gs2.windows.enablejni}"/>
2555      <arg value="USE_SQLITE=0"/>--> <!-- why is this not on by default? -->
2556    </exec>
2557
2558    <!-- install gs2build indexers for windows -->
2559      <if>
2560    <bool><istrue value="${current.os.iswindows}"/></bool>
2561    <copy todir="${gs2build.home}/bin/windows">
2562      <fileset dir="${gs2build.home}/common-src/indexers/bin">
2563        <include name="*.*"/>
2564      </fileset>
2565    </copy>
2566      </if>
2567
2568    <!-- LuceneWrapper jar file not installed by default -->
2569    <mkdir dir="${gs2build.home}/bin/java"/>
2570    <copy file="${lucene.home}/LuceneWrapper4.jar" todir="${gs2build.home}/bin/java"/>
2571
2572  </target>
2573
2574  <!-- ============== gli targets ================================= -->
2575 
2576  <!-- gliserver.pl, gsdlCGI.pm, metadata-server.pl and checksum.pl are updated alongside
2577       this in target svnupdate-collection-building -->
2578  <target name="svnupdate-gli" if="collection.building.enabled" depends="init" unless="nosvn.mode">
2579
2580    <exec executable="svn">
2581      <arg value="update"/>
2582      <arg value="${gli.home}"/>
2583      <arg value="-r"/><arg value="${branch.revision}"/>
2584    </exec>
2585
2586  </target>
2587
2588  <!-- gliserver.pl, gsdlCGI.pm, metadata-server.pl and checksum.pl are updated
2589       alongside this prepare-gli target in target prepare-collection-building -->
2590  <target name="prepare-gli" depends="init" if="collection.building.enabled" unless="gli.present">
2591    <!-- checkout -->
2592    <if><bool><and><not><istrue value="${nosvn.mode}"/></not><isset property="with.gli.and.gems"/></and></bool>
2593
2594    <exec executable="svn">
2595      <arg value="checkout"/>
2596      <arg value="${svn.root}/main/${branch.path}/gli"/>
2597      <arg value="-r"/><arg value="${branch.revision}"/>
2598    </exec>
2599
2600    </if>
2601  </target>
2602
2603  <!-- svn checkout gliserver.pl, gsdlCGI.pm for gli applet, as well as gsdlCGI.pm-dependent metadata-server.pl
2604       (checksum.pl is used by GS2 for depositdspace.dm and may eventually be used by GS3 too) -->
2605  <target name="svnupdate-cgi">
2606
2607    <exec executable="svn" dir="web/WEB-INF/cgi">
2608      <arg value="export"/>
2609      <arg value="-r"/><arg value="${branch.revision}"/>
2610      <arg value="${svn.root}/main/${branch.path}/greenstone2/common-src/cgi-bin/gliserver.pl"/>
2611    </exec>
2612    <exec executable="svn" dir="web/WEB-INF/cgi">
2613      <arg value="export"/>
2614      <arg value="-r"/><arg value="${branch.revision}"/>
2615      <arg value="${svn.root}/main/${branch.path}/greenstone2/common-src/cgi-bin/gsdlCGI.pm"/>
2616    </exec>
2617    <exec executable="svn" dir="web/WEB-INF/cgi">
2618      <arg value="export"/>
2619      <arg value="-r"/><arg value="${branch.revision}"/>
2620      <arg value="${svn.root}/main/${branch.path}/greenstone2/common-src/cgi-bin/metadata-server.pl"/>
2621    </exec>
2622    <exec executable="svn" dir="web/WEB-INF/cgi">
2623      <arg value="export"/>
2624      <arg value="-r"/><arg value="${branch.revision}"/>
2625      <arg value="${svn.root}/main/${branch.path}/greenstone2/common-src/cgi-bin/checksum.pl"/>
2626    </exec>
2627  </target>
2628
2629 
2630  <target name="clean-gli" depends="init" if="collection.building.enabled">
2631    <!-- gli -->
2632    <property name="gli.home" value="${basedir}/gli"/>
2633    <!-- linux -->
2634    <exec executable="clean.sh" os="${os.unix}" dir="${gli.home}"
2635      resolveExecutable="true" failonerror="true"/>
2636    <!-- windows -->
2637    <exec executable="clean.bat" osfamily="windows" dir="${gli.home}"
2638      resolveExecutable="true" failonerror="true"/>
2639  </target>
2640 
2641  <target name="compile-gli" depends="init" if="collection.building.enabled">
2642    <if><bool><isset property="with.gli.and.gems"/></bool>
2643      <!-- gli -->
2644      <property name="gli.home" value="${basedir}/gli"/>
2645
2646      <!-- linux -->
2647      <exec executable="makegli.sh" os="${os.unix}" dir="${gli.home}" resolveExecutable="true" failonerror="true"/>
2648      <!--remote gli-->
2649      <exec executable="makejar.sh" os="${os.unix}" dir="${gli.home}"
2650        resolveExecutable="true" failonerror="true"/>
2651      <!-- windows -->
2652      <exec executable="makegli.bat" osfamily="windows" dir="${gli.home}" resolveExecutable="true" failonerror="true"/>
2653      <!--remote gli-->
2654      <exec executable="makejar.bat" osfamily="windows" dir="${gli.home}"
2655        resolveExecutable="true" failonerror="true"/>
2656      <copy file="${gli.home}/GLIServer.jar" todir="${gs2build.home}/bin/java" />
2657    </if>
2658  </target>
2659
2660  <target name="gli" description="Run the Greenstone Librarian Interface" depends="init" if="collection.building.enabled">
2661    <exec executable="${basedir}/gli/gli.sh" os="${os.linux},${os.solaris}" dir="${basedir}/gli" spawn="true">
2662      <env key="gsdl3path" path="${basedir}"/>
2663      <env key="gsdlpath" path="${gs2build.home}"/>
2664    </exec>
2665    <exec executable="${basedir}/gli/gli.sh" os="${os.mac}" dir="${basedir}/gli" spawn="true">
2666      <env key="gsdl3path" path="${basedir}"/>
2667      <env key="gsdlpath" path="${gs2build.home}"/>
2668      <env key="DYLD_LIBRARY_PATH" path="${env.DYLD_LIBRARY_PATH}:${gdbm.home}/lib"/>
2669    </exec>
2670    <exec executable="${basedir}/gli/gli.bat" osfamily="windows" dir="${basedir}/gli" spawn="true">
2671      <env key="GSDL3PATH" path="${basedir}"/>
2672      <env key="GSDLPATH" path="${gs2build.home}"/>
2673    </exec>
2674    <echo>Running GLI from Ant means that you don't get to see any of the terminal output. If you have problems with GLI and want to see the output, please run the script gli.sh/bat from the greenstone3/gli directory.
2675    </echo>
2676  </target>
2677
2678  <!-- ================ gs2build targets =========================== -->
2679
2680  <target name="svnupdate-gs2build" if="collection.building.enabled" depends="init" unless="nosvn.mode">
2681    <echo>svn updating gs2build</echo>
2682    <exec executable="svn">
2683      <arg value="update"/>
2684      <arg value="${gs2build.home}"/>
2685      <arg value="-r"/><arg value="${branch.revision}"/>
2686    </exec>
2687  </target>
2688   
2689  <target name="prepare-gs2build" depends="init" if="collection.building.enabled" unless="gs2build.present">
2690    <antcall target="checkout-gs2build"/>
2691    <antcall target="prepare-pdfbox"/>
2692    <antcall target="prepare-imagemagick"/> <!-- has to be done before calling prepare-gnome-lib -->
2693    <antcall target="prepare-gnome-lib"/>
2694    <antcall target="unzip-windows-packages"/>
2695    <antcall target="checkout-winbin"/>
2696    <antcall target="get-windows-binaries"/>
2697    <antcall target="delete-winbin"/>
2698  </target>
2699
2700  <target name="checkout-gs2build" depends="init" if="collection.building.enabled" unless="nosvn.mode">
2701    <echo>checking out gs2build</echo>
2702    <exec executable="svn">
2703      <arg value="checkout"/>
2704      <arg value="${svn.root}/main/${branch.path}/gs2build"/>
2705      <arg value="-r"/><arg value="${branch.revision}"/>
2706    </exec>
2707  </target>
2708
2709  <!-- Gets the PDFBox extension into gs2build/ext if checkout.pdfbox.ext is set to true in build.properties
2710       (which it is by default) -->
2711  <target name="prepare-pdfbox" depends="init" if="collection.building.enabled">
2712    <if>
2713      <bool>
2714    <istrue value="${checkout.pdfbox.ext}"/>
2715      </bool>
2716     
2717      <property name="pdfbox.ext.dir" value="${gs2build.home}/ext/pdf-box"/>
2718      <condition property="pdfbox.ext.present">
2719    <available file="${pdfbox.ext.dir}" type="dir" />
2720      </condition>
2721     
2722      <!-- get the pdfbox tar.gz file if we don't already have it and extract it if there's no pdf-box directory in gs2build/ext-->
2723      <if>
2724    <bool>
2725      <not><istrue value="${pdfbox.ext.present}"/></not>
2726    </bool>
2727
2728    <if>
2729      <bool>
2730        <not><istrue value="${gs2build.home}/ext/pdf-box-java.tar.gz"/></not>
2731      </bool>
2732
2733      <echo>Checking out the PDFBox extension into the GSDLHOME extension area</echo>
2734      <exec executable="svn">
2735        <arg value="export"/>
2736        <arg value="${svn.root}/gs2-extensions/pdf-box/trunk/pdf-box-java.tar.gz"/>
2737        <arg value="${gs2build.home}/ext/pdf-box-java.tar.gz"/>
2738      </exec>
2739    </if>   
2740
2741    <echo>Extacting the PDFBox extension into the GSDLHOME extension area</echo>
2742    <untar compression="gzip"
2743           src="${gs2build.home}/ext/pdf-box-java.tar.gz"
2744           dest="${gs2build.home}/ext"/>
2745
2746    <delete file="${gs2build.home}/ext/pdf-box-java.tar.gz"/>
2747
2748    <else>
2749      <echo>The PDFBox extension already exists at ${pdfbox.ext.dir}</echo>
2750    </else>
2751      </if>
2752
2753      <else>
2754    <echo>**** Not preparing the PDFBox extension:</echo>
2755    <echo>The property checkout.pdfbox.ext in build.properties was not set or was set to false</echo>
2756      </else>
2757    </if>
2758  </target>
2759
2760  <target name="prepare-imagemagick" depends="init" if="collection.building.enabled">
2761    <if>
2762      <bool>
2763    <istrue value="${checkout.imagemagick.ext}"/>
2764      </bool>
2765
2766      <antcall target="checkout-imagemagick"/>
2767      <!--Compilation of imagemagick now happens during ant install, still before configuring the src code, as before -->
2768
2769      <else>
2770    <echo>**** Not preparing imagemagick:</echo>
2771    <echo>property checkout.imagemagick.ext in build.properties was not set or was set to false</echo>
2772      </else>
2773    </if>
2774  </target>
2775
2776  <target name="checkout-imagemagick" depends="init" if="collection.building.enabled" unless="nosvn.mode">
2777   
2778    <property name="imagemagick.src.dir" value="${gs2build.home}/ext/imagemagick"/>
2779    <condition property="imagemagick.src.present">
2780      <available file="${imagemagick.src.dir}" type="dir" />
2781    </condition>
2782
2783    <if>
2784      <bool>
2785    <not><istrue value="${imagemagick.src.present}"/></not>
2786      </bool>
2787     
2788      <echo>checking out imagemagick source into the extension area</echo>
2789
2790      <exec executable="svn">
2791    <arg value="checkout"/>
2792    <arg value="${svn.root}/gs2-extensions/imagemagick/trunk/src"/>
2793    <arg value="${imagemagick.src.dir}"/>
2794      </exec>
2795
2796      <else>
2797    <echo>imagemagick source code already exists at ${imagemagick.src.dir}</echo>
2798      </else>
2799    </if>
2800  </target>
2801
2802 <!-- Compile up imagemagick src folder if: the checkout.imagemagick.ext flag is turned on, if the imagick source code exists and if hasn't already been compiled up, then compile it up. Later can check if a gs-specific binary version has been installed already, in which case compilation won't be necessary. -->
2803  <target name="compile-imagemagick" if="checkout.imagemagick.ext">
2804   
2805    <property name="imagemagick.src.dir" value="${gs2build.home}/ext/imagemagick"/>
2806    <property name="imagemagick.compiled.dir" value="${gs2build.home}/ext/imagemagick/${os.bin.dir}"/>
2807
2808    <condition property="imagemagick.src.present.firstcheck">
2809      <available file="${imagemagick.src.dir}" type="dir" />
2810    </condition>
2811    <condition property="imagemagick.compiled.present">
2812      <available file="${imagemagick.compiled.dir}" type="dir"/>
2813    </condition>
2814    <!--<condition property="imagemagick.bin.present">
2815      <available file="${basedir}/wherever/the/imgmagick/binary/is/to/be/found" type="dir" />
2816    </condition>-->
2817
2818    <!-- imagemagick will only be checked out if the user set the checkout.imagemagick.ext in build.properties -->
2819    <if>
2820      <bool>
2821    <isfalse value="${imagemagick.src.present.firstcheck}"/>
2822      </bool>
2823      <antcall target="checkout-imagemagick"/>
2824    </if>
2825
2826    <!-- keep track of whether the imagemagick src is now indeed present. Need to know this for a subsequent test -->
2827    <condition property="imagemagick.src.present">
2828      <available file="${imagemagick.src.dir}" type="dir" />
2829    </condition>
2830
2831    <if>
2832      <bool>
2833    <and>
2834      <istrue value="${imagemagick.src.present}"/> <!-- imagemagick src code is present -->
2835      <isfalse value="${imagemagick.compiled.present}"/> <!-- imagemagick src not compiled yet, so no imagemagick/os subfolder yet -->
2836    </and>
2837      </bool>
2838      <!-- then compile it. Only necessary for mac/linux, since windows has a stable working binary of imagemagick -->
2839      <exec executable="/bin/bash" dir="${imagemagick.src.dir}" failonerror="true">
2840        <arg value="CASCADE-MAKE.sh"/>
2841      </exec> 
2842    </if>
2843  </target>
2844
2845
2846  <!-- Compile up gnome-lib src folder if: checkout.gnomelib.ext is turned on, and if not using the binary
2847       version (gnome-lib-minimal), and if the gnome-lib src folder is not already compiled up. -->
2848  <target name="compile-gnome-lib" if="checkout.gnomelib.ext">
2849
2850    <!-- http://stackoverflow.com/questions/3290307/sourcing-a-shell-profile-in-an-ant-build-file
2851     TODO: CASCADE-MAKE already sources devel.bash, but we still want to source it more globally,
2852     so that the rest of the GS3 compilation process also has access to those env variables -->
2853   
2854    <property name="gnome.lib.src.dir" value="${basedir}/gs2build/ext/gnome-lib"/>
2855    <property name="gnome.lib.compiled.dir" value="${basedir}/gs2build/ext/gnome-lib/${os.bin.dir}"/>
2856
2857    <condition property="gnome.src.lib.present.firstcheck" value="true" else="false">
2858      <available file="${gnome.lib.src.dir}" type="dir" />
2859    </condition>
2860    <condition property="gnome.compiled.lib.present" value="true" else="false">
2861      <available file="${gnome.lib.compiled.dir}" type="dir"/>
2862    </condition>
2863    <condition property="gnome.lib.min.present" value="true" else="false">
2864      <available file="${basedir}/gs2build/ext/gnome-lib-minimal" type="dir" />
2865    </condition>
2866
2867    <!-- Make sure to checkout gnome-lib if it was not checked out at this stage
2868     since we're instructed to do so in th pre-condition to this target -->
2869    <if>
2870      <bool>
2871    <and>
2872      <isfalse value="${gnome.lib.min.present}"/>
2873      <isfalse value="${gnome.src.lib.present.firstcheck}"/>
2874    </and>
2875      </bool>
2876      <antcall target="checkout-gnome-lib"/>
2877    </if>
2878
2879    <!-- Keep track of whether we have the gnome-lib src folder now. Need to know this for a subsequent test -->
2880    <condition property="gnome.src.lib.present" value="true" else="false">
2881      <available file="${gnome.lib.src.dir}" type="dir" />
2882    </condition>
2883
2884    <!--<echo>MIN: ${gnome.lib.min.present}
2885      SRC LIB: ${gnome.src.lib.present}
2886      COMPILED: ${gnome.compiled.lib.present}</echo>-->
2887
2888    <if>
2889      <bool>
2890    <and>
2891      <isfalse value="${gnome.lib.min.present}"/> <!-- no gnome-lib-minimal binary present -->
2892      <istrue value="${gnome.src.lib.present}"/> <!-- gnome-lib folder for compilation is present-->
2893      <isfalse value="${gnome.compiled.lib.present}"/> <!-- gnome-lib not yet compiled, so no gnome-lib/os subfolder yet -->
2894    </and>
2895      </bool>
2896
2897      <!-- then compile it. Only necessary for mac/linux, since windows doesn't need gnome lib -->
2898      <exec executable="/bin/bash" dir="${gnome.lib.src.dir}" failonerror="true">
2899        <arg value="CASCADE-MAKE.sh"/>
2900      </exec> 
2901    </if>
2902  </target>
2903
2904
2905  <target name="prepare-gnome-lib" depends="init" if="collection.building.enabled" unless="gnome-lib.present">
2906    <if>
2907      <bool>
2908    <istrue value="${checkout.gnomelib.ext}"/>
2909      </bool>
2910
2911      <antcall target="checkout-gnome-lib"/>
2912      <!--Compilation of gnome-lib happens during ant install, just before configuring (common-src and) build-src-->
2913
2914      <else>
2915    <echo>**** Not preparing gnome-lib:</echo>
2916    <echo>property checkout.gnomelib.ext in build.properties was not set or was set to false</echo>
2917      </else>
2918    </if>
2919  </target>
2920
2921
2922  <target name="checkout-gnome-lib" depends="init" if="collection.building.enabled" unless="nosvn.mode">
2923
2924    <property name="gnomelib.src.dir" value="${basedir}/gs2build/ext/gnome-lib"/>
2925    <condition property="gnome.src.present">
2926      <available file="${gnomelib.src.dir}" type="dir" />
2927    </condition>
2928
2929    <if>
2930      <bool>
2931    <not><istrue value="${gnome.src.present}"/></not>
2932      </bool>
2933
2934      <echo>checking out gnome-lib extension</echo>
2935      <exec executable="svn">
2936    <arg value="checkout"/>
2937    <arg value="${svn.root}/gs2-extensions/gnome-lib/trunk/src"/>
2938    <arg value="${gs2build.home}/ext/gnome-lib"/>
2939      </exec>
2940
2941      <else>
2942    <echo>gnomelib source code already exists at ${gnomelib.src.dir}</echo>
2943      </else>
2944    </if>
2945
2946  </target>
2947
2948  <target name="checkout-winbin" depends="init" if="current.os.iswindows"
2949    unless="nosvn.mode">
2950
2951    <exec executable="svn">
2952      <arg value="checkout"/>
2953      <arg value="${svn.root}/main/${branch.path}/binaries/windows"/>
2954      <arg value="-r"/><arg value="${branch.revision}"/>
2955      <arg value="winbin"/>
2956    </exec>
2957
2958  </target>
2959
2960  <target name="update-winbin" depends="init" if="current.os.iswindows" unless="nosvn.mode">
2961    <exec executable="svn">
2962      <arg value="update"/>
2963      <arg value="winbin"/>
2964      <arg value="-r"/><arg value="${branch.revision}"/>
2965    </exec>
2966
2967  </target>
2968 
2969  <target name="get-windows-binaries" depends="init" if="collection.building.enabled.windows">
2970    <move todir="${gs2build.home}/bin/windows" failonerror="false">
2971      <fileset dir="${basedir}/winbin/bin"/>
2972    </move>
2973  </target>
2974
2975  <target name="delete-winbin" depends="init" if="collection.building.enabled.windows">
2976    <delete dir="${basedir}/winbin"/>
2977  </target>
2978 
2979  <target name="unzip-windows-packages" depends="init" if="current.os.iswindows"> 
2980    <unzip src="${common.src.home}/packages/windows/crypt/crypt.zip"
2981      dest="${common.src.home}/packages/windows/crypt"/>
2982    <untar compression="gzip"
2983      src="${common.src.home}/packages/sqlite/${sqlite.targz.version}"
2984      dest="${common.src.home}/packages/sqlite"/>
2985    <unzip src="${common.src.home}/indexers/packages/windows/iconv/iconv.zip"
2986      dest="${common.src.home}/indexers/packages/windows/iconv"/>
2987  </target>
2988   
2989  <target name="gs2build-edit-setup-bat" if="collection.building.enabled.windows">
2990    <!-- we want a windows path in the setup.bat file -->
2991    <pathconvert targetos="windows" property="gs2build.home.windows">
2992      <path path="${gs2build.home}"/>
2993    </pathconvert>
2994    <move file="${gs2build.home}/setup.bat" tofile="${gs2build.home}/setup-tmp.bat">
2995      <filterset>
2996        <filter token="gsdlhome" value="${gs2build.home.windows}"/>
2997      </filterset>
2998    </move> 
2999    <move file="${gs2build.home}/setup-tmp.bat" tofile="${gs2build.home}/setup.bat" />
3000  </target>
3001 
3002 
3003  <target name="clean-build-src" depends="init" if="collection.building.enabled">
3004    <!-- unix:  -->
3005    <if><bool><available file="${build.src.home}/Makefile"/></bool>
3006    <exec executable="make" os="${os.unix}" dir="${build.src.home}" failonerror="true">
3007      <arg value="clean"/>
3008    </exec>
3009    </if>
3010    <!-- windows: -->   
3011    <exec executable="nmake" dir="${build.src.home}" osfamily="windows" failonerror="true">
3012      <arg value="/f"/>
3013      <arg value="win32.mak"/>
3014      <arg value="clean"/>
3015      <arg value="GSDLHOME=${gs2build.home}"/>
3016    </exec>
3017  </target>
3018 
3019 
3020  <target name="distclean-build-src" depends="init,clean-build-src" if="collection.building.enabled">
3021    <!-- unix:  -->
3022    <if><bool><available file="${build.src.home}/Makefile"/></bool>
3023    <exec executable="make" os="${os.unix}" dir="${build.src.home}" failonerror="true">
3024      <arg value="distclean"/>
3025    </exec>
3026    </if>
3027    <!-- windows: distclean = clean + remove configure products (remove makefiles). But on Windows there is no removing makefiles, so we just call clean -->   
3028    <exec executable="nmake" dir="${build.src.home}" osfamily="windows" failonerror="true">
3029      <arg value="/f"/>
3030      <arg value="win32.mak"/>
3031      <arg value="clean"/>
3032      <arg value="GSDLHOME=${gs2build.home}"/>
3033    </exec>
3034  </target>
3035 
3036  <target name="configure-build-src" depends="init" if="collection.building.enabled"
3037    description="Configure the build-src component">
3038    <exec executable="${build.src.home}/configure" os="${os.unix}"
3039      dir="${build.src.home}" failonerror="true">
3040      <arg value="--prefix=${gs2build.home}"/>
3041      <arg line="${gs2.opt.args} ${static.arg} ${cross.configure.args} ${allargs}"/>
3042    </exec>
3043  </target>
3044
3045  <!-- common-src is done separately and needs to be compiled first -->
3046  <target name="compile-build-src" depends="init" if="collection.building.enabled">
3047   
3048    <exec executable="make" dir="${build.src.home}" os="${os.unix}" failonerror="true">
3049        <arg line="${ldlpath.arg}"/>
3050    </exec>
3051   
3052    <exec executable="make" dir="${build.src.home}" os="${os.unix}" failonerror="true">
3053      <arg value="install"/>
3054    </exec>
3055
3056    <!-- run the setup script -->
3057    <!-- <exec executable="${compile.windows.c++.setup}" osfamily="windows" failonerror="true"/>-->
3058      <!--Above does not work: even though vcvars.bat executes, the env changes it makes don't get saved. Need user to run vcvars.bat first before calling ant-->
3059      <exec executable="nmake" dir="${build.src.home}" osfamily="windows" failonerror="true">
3060        <arg value="/f"/>
3061        <arg value="win32.mak"/>
3062    <arg value="GSDLHOME=${gs2build.home}"/>
3063      </exec>
3064      <exec executable="nmake" dir="${build.src.home}" osfamily="windows" failonerror="true">
3065        <arg value="/f"/>
3066        <arg value="win32.mak"/>
3067        <arg value="install"/>
3068    <arg value="GSDLHOME=${gs2build.home}"/>
3069      </exec>
3070  </target>
3071 
3072
3073  <!-- ======================== TESTING Targets ========================= -->
3074 
3075  <target name="test" description="Run the (incomplete) JUnit test suite "
3076    depends="init">
3077    <mkdir dir="${basedir}/test"/>
3078    <junit printsummary="withOutAndErr"
3079      errorproperty="test.failed"
3080      failureproperty="test.failed"
3081      fork="${junit.fork}">
3082      <formatter type="plain"/>
3083      <classpath>
3084        <pathelement location="${build.home}/gsdl3test.jar"/>
3085        <path refid="compile.classpath"/>
3086      </classpath>
3087      <test name="${testcase}" if="testcase"/>
3088      <batchtest todir="${basedir}/test" unless="testcase">
3089        <fileset dir="${build.home}" includes="**/*Test.class" />
3090      </batchtest>
3091    </junit>
3092    <echo>
3093      *********************************************
3094      Test output can be found in directory 'test'
3095      *********************************************
3096    </echo>
3097  </target>
3098
3099  <!-- ======================== FLAX Targets ========================= -->
3100  <target name="prepare-flax" description="check out flax source code from another repository" if="install.flax">
3101    <echo>checking out flax ...</echo>
3102    <mkdir dir="${basedir}/src/java/org/flax"/>
3103    <mkdir dir="${basedir}/src/java/org/greenstone/gsdl3/flax"/>
3104    <mkdir dir="${basedir}/src/java/org/greenstone/gsdl3/action/flax"/>
3105    <mkdir dir="${web.home}/WEB-INF/classes/flax"/>
3106    <mkdir dir="${web.home}/interfaces/flax"/>
3107    <mkdir dir="${web.home}/sites/flax"/>
3108    <mkdir dir="${basedir}/flax-resources"/>
3109    <mkdir dir="${basedir}/flax-lib"/>
3110    <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/src/java/org/flax"/>
3111      <arg value="src/java/org/flax"/></exec>
3112    <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/src/java/org/greenstone/gsdl3/flax"/>
3113      <arg value="src/java/org/greenstone/gsdl3/flax"/></exec>
3114    <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/src/java/org/greenstone/gsdl3/action/flax"/>
3115      <arg value="src/java/org/greenstone/gsdl3/action/flax"/></exec>
3116     <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/web/WEB-INF/classes/flax"/>
3117      <arg value="${web.home}/WEB-INF/classes/flax"/></exec>
3118    <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/web/interfaces/flax"/>
3119      <arg value="${web.home}/interfaces/flax"/></exec>
3120    <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/web/sites/flax"/>
3121      <arg value="${web.home}/sites/flax"/></exec>
3122    <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/flax-resources"/>
3123      <arg value="flax-resources"/></exec>
3124    <exec executable="svn"><arg value="checkout"/><arg value="${flax.checkout.path}/lib"/>
3125      <arg value="flax-lib"/></exec>
3126    <antcall target="flax-copy-del-files" />
3127  </target>
3128 
3129  <target name="flax-copy-del-files" description="copy some flax files into the appropriate greenstone3 directories and delete some unwanted greenstone stuff">
3130    <copy file="${web.home}/WEB-INF/classes/flax/web.xml" todir="${web.home}/WEB-INF" overwrite="true" />
3131    <copy todir="${web.home}/WEB-INF/lib">
3132            <fileset dir="${basedir}/flax-lib">
3133               <include name="*.jar"/>
3134            </fileset> 
3135    </copy>
3136    <!--<delete dir="${web.home}/sites/gateway"/>
3137    <delete dir="${web.home}/sites/localsite"/>-->
3138  </target>
3139
3140  <target name="update-flax" description="update flax from repository">
3141    <echo>updating flax ...</echo>
3142    <exec executable="svn"><arg value="update"/>
3143      <arg value="src/java/org/flax"/></exec>
3144    <exec executable="svn"><arg value="update"/>
3145      <arg value="src/java/org/greenstone/gsdl3/action/flax"/></exec>
3146    <exec executable="svn"><arg value="update"/>
3147      <arg value="src/java/org/greenstone/gsdl3/flax"/></exec>
3148    <exec executable="svn"><arg value="update"/>
3149      <arg value="${web.home}/WEB-INF/classes/flax"/></exec>
3150    <exec executable="svn"><arg value="update"/>
3151      <arg value="${web.home}/interfaces/flax"/></exec>
3152    <exec executable="svn"><arg value="update"/>
3153      <arg value="${web.home}/web/sites/flax"/></exec>
3154    <exec executable="svn"><arg value="update"/>
3155      <arg value="flax-resources"/></exec>
3156    <exec executable="svn"><arg value="update"/>
3157      <arg value="flax-lib"/></exec>
3158    <antcall target="compile-core" />
3159  </target>
3160
3161  <!-- ========================End of FLAX Targets ========================= -->
3162
3163  <target name="compile-javadocs">
3164    <javadoc packagenames="org.greenstone.*"
3165           sourcepath="src/java"
3166           defaultexcludes="yes"
3167           destdir="docs/javadoc"
3168           author="true"
3169           version="true"
3170           use="true"
3171           windowtitle="Greenstone3 API">
3172    <doctitle><![CDATA[<h1>Greenstone3 API</h1>]]></doctitle>
3173    </javadoc>
3174  </target>
3175
3176<!-- ========== Some distribution targets ======================== -->
3177  <target name="remove-source">
3178    <if><bool><isset property="with.gli.and.gems"/></bool>
3179    <delete includeEmptyDirs="true">
3180      <fileset dir="." defaultexcludes="false">
3181        <patternset refid="greenstone3.source.component"/>
3182     </fileset>
3183    </delete>
3184   
3185    <else>
3186    <delete includeEmptyDirs="true">
3187      <fileset dir="." defaultexcludes="false">
3188        <patternset refid="greenstone3.source.no.gli.component"/>
3189     </fileset>
3190    </delete>
3191    </else>
3192    </if>
3193  </target>
3194
3195  <target name="dist-tidy"
3196    description="'tidies-up' a greenstone3 installation for distribution."
3197    unless="${properties.keep.src}">
3198
3199    <!-- delete unneeded things -->
3200    <delete dir="${packages.home}/axis"/>
3201    <delete><fileset dir="${packages.home}" includes="*.zip"/></delete>
3202    <delete file="README-SVN.txt"/>
3203    <delete file="build.properties.in"/>
3204
3205    <!-- delete source files -->
3206    <antcall target="remove-source"/>
3207
3208    <!-- create empty directories -->
3209    <mkdir dir="${web.writablehome}/applet"/>
3210    <mkdir dir="${web.writablehome}/logs"/>
3211    <mkdir dir="${web.writablehome}/logs/tmp"/>
3212
3213    <!-- Lines with ***** are commented out because these files are useful if we want hybrid installations -->
3214   
3215    <!-- os specific tidy-ups -->
3216    <!-- linux, mac -->
3217    <if><bool><istrue value="${current.os.isunix}"/></bool>
3218      <!--*****<delete><fileset dir="." includes="*.bat"/></delete>-->
3219      <if><bool><isset property="with.gli.and.gems"/></bool>
3220        <!--*****<delete><fileset dir="gli" includes="*.bat"/></delete>-->
3221      </if>
3222      <!--*****<delete><fileset dir="gs2build" includes="*.bat"/></delete>-->
3223      <!--*****<delete><fileset dir="bin/script" includes="*.bat"/></delete>-->
3224      <delete file="${basedir}/gs2build/win32cfg.h"/>
3225      <delete file="${basedir}/gs2build/win32.mak"/>
3226      <delete dir="${basedir}/winutil"/>
3227      <delete failonerror="false"><fileset dir="${lib.jni}" includes="*.dll"/></delete>
3228
3229    <!-- windows -->
3230    <else><if><bool><istrue value="${current.os.iswindows}"/></bool>
3231      <!--*****<delete><fileset dir="." includes="*.sh,*.bash,*.csh"/></delete>-->
3232      <if><bool><isset property="with.gli.and.gems"/></bool>
3233    <!--*****<delete><fileset dir="gli" includes="*.sh,*.bash,*.csh"/></delete>-->
3234      </if>
3235      <!--*****<delete><fileset dir="gs2build" includes="*.sh,*.bash,*.csh"/></delete>-->
3236      <!--*****<delete><fileset dir="bin/script" includes="*.sh,*.bash,*.csh"/></delete>-->
3237    </if></else></if>
3238
3239  </target>
3240
3241  <!-- fix up executable permissions for binary release -->
3242  <target name="fix-execute-permissions">
3243    <echo>Setting binaries to executable</echo>
3244    <chmod perm="775">
3245      <fileset dir="."><patternset refid="greenstone3.executables"/></fileset>
3246    </chmod>
3247  </target>
3248 
3249  <!-- fix up executable permissions for source code release -->
3250  <target name="fix-execute-permissions-source">
3251    <chmod perm="775">
3252      <fileset dir="."><patternset refid="greenstone3.source.executables"/></fileset>
3253    </chmod>
3254  </target>
3255
3256  <!-- for macs, set up the .app shortcuts to gsi, gli, client-gli and gems -->
3257  <target name="gen-mac-shortcuts">   
3258    <if><bool><istrue value="${current.os.ismac}"/></bool>
3259      <filter token="gsdl3srchome" value="${basedir}"/>
3260      <copy file="${basedir}/gs3-server.app/Contents/document.wflow.in" tofile="${basedir}/gs3-server.app/Contents/document.wflow" filtering="true" overwrite="true"/>
3261      <copy file="${basedir}/gli.app/Contents/document.wflow.in" tofile="${basedir}/gli.app/Contents/document.wflow" filtering="true" overwrite="true"/>
3262      <copy file="${basedir}/client-gli.app/Contents/document.wflow.in" tofile="${basedir}/client-gli.app/Contents/document.wflow" filtering="true" overwrite="true"/>
3263      <copy file="${basedir}/gems.app/Contents/document.wflow.in" tofile="${basedir}/gems.app/Contents/document.wflow" filtering="true" overwrite="true"/>
3264    </if>
3265  </target>
3266
3267  <!-- ============= tweaks for making compilation static ========== --> 
3268  <target name="tweak-makefiles" depends="init" if="compile.static">
3269    <antcall target="rtftohtml-add-static" />
3270  </target>
3271   
3272  <target name="rtftohtml-add-static" depends="init" if="collection.building.enabled">
3273    <rsr verbosity="1" file="${gs2build.home}/build-src/packages/rtftohtml/rtftohtml_src/Makefile" pattern="-o rtftohtml(.{2})EXEEXT(.{1})" replacement="-o rtftohtml$1EXEEXT$2 -static" />
3274  </target>
3275   
3276    <target name="run-collection-tests">
3277        <if><bool><not><available file="${basedir}/ext/testing" type="dir"/></not></bool>
3278            <fail>The testing extension is not available. This is required to perform the tests. It can be acquired from SVN by running the command "svn co http://svn.greenstone.org/gs3-extensions/testing/trunk/src testing" in the ext directory of your Greenstone 3 installation. </fail>
3279        </if>
3280        <for param="testjar">
3281            <path>
3282                <fileset dir="${basedir}" includes="web/sites/*/collect/*/tests/tests.jar"/>
3283            </path>
3284            <sequential>
3285                <echo>Testing @{testjar}</echo>
3286                <java classname="org.junit.runner.JUnitCore" fork="true">
3287                    <arg value="gstests.TestClass"/>
3288                    <jvmarg value="-DSERVERURL=http://${tomcat.server}:${tomcat.port}${app.path}${server.default.servlet} "/>
3289                    <classpath>
3290                        <fileset dir="${basedir}/ext/testing/lib/java">
3291                            <include name="*.jar"/>
3292                        </fileset>
3293                        <files includes="@{testjar}"/>
3294                    </classpath>
3295                </java>
3296            </sequential>
3297        </for>
3298    </target>
3299   
3300    <target name="build-collection-tests">
3301        <if><bool><not><available file="${basedir}/ext/testing" type="dir"/></not></bool>
3302            <fail>The testing extension is not available. This is required to perform the tests. It can be acquired from SVN by running the command "svn co http://svn.greenstone.org/gs3-extensions/testing/trunk/src testing" in the ext directory of your Greenstone 3 installation. </fail>
3303        </if>
3304        <for param="compiledir">
3305            <path>
3306                <dirset dir="${basedir}" includes="web/sites/*/collect/*/tests/src"/>
3307            </path>
3308            <sequential>
3309                <echo>Compiling @{compiledir}</echo>
3310                <if><bool><not><available file="@{compiledir}/../build" type="dir"/></not></bool>
3311                    <mkdir dir="@{compiledir}/../build"/>
3312                </if>
3313                <javac
3314                    srcdir="@{compiledir}"
3315                    destdir="@{compiledir}/../build"
3316                        includeantruntime="${compile.includeantruntime}"
3317                    debug="${compile.debug}"
3318                    deprecation="${compile.deprecation}"
3319                    optimize="${compile.optimize}"
3320                    encoding="${compile.encoding}">
3321                    <classpath>
3322                        <fileset dir="${basedir}/ext/testing/lib/java">
3323                            <include name="*.jar"/>
3324                        </fileset>
3325                    </classpath>
3326                    <include name="gstests/*.java"/>
3327                </javac>
3328                <jar destfile="@{compiledir}/../tests.jar">
3329                    <fileset dir="@{compiledir}/../build">
3330                        <include name="gstests/**"/>
3331                    </fileset>
3332                    <manifest>
3333                        <attribute name="Built-By" value="${user.name}" />
3334                    </manifest>
3335                </jar>
3336            </sequential>
3337        </for>
3338    </target>
3339</project>
Note: See TracBrowser for help on using the browser.